Recover + restore and backup CARS

Similar Questions

• Restore and backup RMAN recovery in a new server

  Version: 11.2
  Platform: Solaris
  
  I did several restorations of RMAN backups to new hosts. Whenever I do a full recovery of a cold backup, when I run the
  

  RECOVER DATABASE

  I used to get

  archive log filename=/u04/mvf/data/dbase/arch/arch.log1_235_678649266.dbf thread=1 sequence=235
  unable to find archive log
  archive log thread=1 sequence=236
  RMAN-00571: ===========================================================
  RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
  RMAN-00571: ===========================================================
  RMAN-03002: failure of recover command at 12/04/2011 14:33:18
  RMAN-06054: media recovery requesting unknown log: thread 1 seq 236 lowscn 11290198

  I considered this as being 'Normal' and always used to cause

  alter database open resetlogs

  But I read the below mentioned informative post yesterday.
  
  Question on create Redo log after restoring files and recover
  
  According to the guidelines of this post, I shouldn't use

  alter database open resetlogs

  for a full recovery.
  
  
  So, what should I do
  a.
  Should I use

  ALTER DATABASE OPEN ; -- I think I got some error with this command when i issued it after RMAN-06054 error . Can't recall what error

  OR
  
  b.
  Should I use

  recover database until sequence 236;

  Here is how I could use a combination of RMAN (for RESTORATION) and SQL (for the OPEN RESETLOGS):

  $ rman target /
  
  Recovery Manager: Release 10.2.0.2.0 - Production on Wed Nov 16 05:40:51 2011
  
  Copyright (c) 1982, 2005, Oracle.  All rights reserved.
  
  connected to target database (not started)
  
  RMAN> startup nomount
  
  Oracle instance started
  
  Total System Global Area     419430400 bytes
  
  Fixed Size                     1261164 bytes
  Variable Size                113246612 bytes
  Database Buffers             297795584 bytes
  Redo Buffers                   7127040 bytes
  
  RMAN> restore controlfile from autobackup;
  
  Starting restore at 16-NOV-11
  using target database control file instead of recovery catalog
  allocated channel: ORA_DISK_1
  channel ORA_DISK_1: sid=156 devtype=DISK
  
  recovery area destination: /usr/oracle/flash_recovery_area
  database name (or database unique name) used for search: MYNDB
  channel ORA_DISK_1: autobackup found in the recovery area
  channel ORA_DISK_1: autobackup found: /usr/oracle/flash_recovery_area/MYNDB/autobackup/2011_11_16/o1_mf_n_767337675_7d6l55ck_.bkp
  channel ORA_DISK_1: control file restore from autobackup complete
  output filename=/usr/oracle/oradata/MYNDB/control01.ctl
  output filename=/usr/oracle/oradata/MYNDB/control02.ctl
  Finished restore at 16-NOV-11
  
  RMAN> sql 'alter database mount';
  
  sql statement: alter database mount
  released channel: ORA_DISK_1
  
  RMAN>
  RMAN> restore database;
  
  Starting restore at 16-NOV-11
  Starting implicit crosscheck backup at 16-NOV-11
  allocated channel: ORA_DISK_1
  channel ORA_DISK_1: sid=156 devtype=DISK
  allocated channel: ORA_DISK_2
  channel ORA_DISK_2: sid=155 devtype=DISK
  Crosschecked 16 objects
  Crosschecked 3 objects
  Finished implicit crosscheck backup at 16-NOV-11
  
  Starting implicit crosscheck copy at 16-NOV-11
  using channel ORA_DISK_1
  using channel ORA_DISK_2
  Finished implicit crosscheck copy at 16-NOV-11
  
  searching for all files in the recovery area
  cataloging files...
  cataloging done
  
  List of Cataloged Files
  =======================
  File Name: /usr/oracle/flash_recovery_area/MYNDB/autobackup/2011_11_16/o1_mf_n_767337675_7d6l55ck_.bkp
  
  using channel ORA_DISK_1
  using channel ORA_DISK_2
  
  channel ORA_DISK_2: starting datafile backupset restore
  channel ORA_DISK_2: specifying datafile(s) to restore from backup set
  restoring datafile 00003 to /usr/oracle/oradata/MYNDB/sysaux01.dbf
  restoring datafile 00004 to /usr/oracle/oradata/MYNDB/users01.dbf
  restoring datafile 00005 to /usr/oracle/oradata/MYNDB/datafile/o1_mf_example_7c4qzn5k_.dbf
  restoring datafile 00006 to /usr/oracle/oradata/MYNDB/undotbs.dbf
  channel ORA_DISK_2: reading from backup piece /usr/oracle/flash_recovery_area/MYNDB/backupset/2011_11_16/o1_mf_nnndf_TAG20111116T052209_7d6l4227_.bkp
  channel ORA_DISK_1: starting datafile backupset restore
  channel ORA_DISK_1: specifying datafile(s) to restore from backup set
  restoring datafile 00001 to /usr/oracle/oradata/MYNDB/system01.dbf
  restoring datafile 00002 to /usr/oracle/oradata/MYNDB/datafile/o1_mf_hemant_7c4qzn0o_.dbf
  restoring datafile 00007 to /usr/oracle/oradata/MYNDB/datafile/o1_mf_assm_tbs_7c4qzn0q_.dbf
  restoring datafile 00008 to /usr/oracle/oradata/MYNDB/datafile/o1_mf_mssm_tbs_7c4qzn0x_.dbf
  channel ORA_DISK_1: reading from backup piece /usr/oracle/flash_recovery_area/MYNDB/backupset/2011_11_16/o1_mf_nnndf_TAG20111116T052209_7d6l4216_.bkp
  channel ORA_DISK_1: restored backup piece 1
  piece handle=/usr/oracle/flash_recovery_area/MYNDB/backupset/2011_11_16/o1_mf_nnndf_TAG20111116T052209_7d6l4216_.bkp tag=TAG20111116T052209
  channel ORA_DISK_1: restore complete, elapsed time: 00:00:35
  channel ORA_DISK_2: restored backup piece 1
  piece handle=/usr/oracle/flash_recovery_area/MYNDB/backupset/2011_11_16/o1_mf_nnndf_TAG20111116T052209_7d6l4227_.bkp tag=TAG20111116T052209
  channel ORA_DISK_2: restore complete, elapsed time: 00:00:35
  Finished restore at 16-NOV-11
  
  RMAN>
  RMAN> exit
  
  Recovery Manager complete.
  $ sqlplus '/ as sysdba'
  
  SQL*Plus: Release 10.2.0.2.0 - Production on Wed Nov 16 05:42:52 2011
  
  Copyright (c) 1982, 2005, Oracle.  All Rights Reserved.
  
  Connected to:
  Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - Production
  With the Partitioning, OLAP and Data Mining options
  
  SQL> alter database open;
  alter database open
  *
  ERROR at line 1:
  ORA-01589: must use RESETLOGS or NORESETLOGS option for database open
  
  SQL> alter database open resetlogs;
  
  Database altered.
  
  SQL>
  

  Note This error message 1589 is:

  $ oerr ora 1589
  01589, 00000, "must use RESETLOGS or NORESETLOGS option for database open"
  // *Cause:  Either incomplete or backup control file recovery has been
  //          performed. After these types of recovery you must specify either
  //          the RESETLOGS option or the NORESETLOGS option to open your
  //          database.
  // *Action: Specify the appropriate option.
  $
  

  Hemant K Collette

• How to restore and backup on Windows XP?

  How can I find backup and restore on XP Professional?

  Original title: How can I make a backup and restore on XP Professional? Thank you * address email is removed from the privacy *.

  Hi StephenGayeske,

  Thanks for posting in the Microsoft Community.

  You want to know how to perform a backup and restore of Windows XP.

  We will work together as a team and try to help you with the problem.

  Please answer the question-

  Are you referring to the backup and restore of the files on the computer?

  Method-

  I wish that return you the item for assistance-

  How to use Backup to protect data and restore files and folders on your computer in Windows XP and Windows Vista

  http://support.Microsoft.com/kb/309340#top

  We know if you need help. We will be happy to help you.

  Thank you.

• iPhone is disabled and ask for password for restore and backup

  my iphone screen is showing that the iphone is disabled and asking the password for restore

  I tried several times but each time the process, says need to access code for iphone restore

  pls advise.

  If you have forgotten the password for your iPhone, iPad or iPod touch, or your device is disabled - Apple supports

• Windows Vista Home Premiun auto restoration and backup; Save the error code: i/o device error (0x8007045D), file backup complete normar will not complete successfully.

  Device error Code: i/o Device (08007045D) error Code... trying to make a backup of normal file that goes all the way and then produces this error code.

  Hey Rodney,
   
  To resolve this issue, follow these steps:
  1. Click Start, type cmd in the start search box, right-click cmd.exe in the list programs and then click Run as administrator.
  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
  2. at a command prompt, type the following command and press ENTER: Chkdsk/r X:
  Note: In this command, x is a placeholder that represents the drive letter of the volume you want to check.
  3. press y when you are prompted to check the drive the next time the system restarts.
  4. close all applications and restart the computer.
  Note: When you restart, Windows checks the drive for errors, and then Windows starts.
  5. after the computer restarts, repeat steps 1 through 4 for the other volume and try the backup operation again.
   
  For more information, see this article: http://support.microsoft.com/kb/952272
   
  I hope this helps.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• After downloading the 23.0.1 version I've lost all the history, but no bookmarks. How can I recover ancient history? Recovery of "import and backup" does not help

  My story memorable and kept going back quite a few months. After the release of Firefox for 23.0.1 I lost all my history and Firefox keeps only the websites visited once the new version has been installed. My favorites were selected. I tried to get back in "Import and backup", but it goes back only to the date of the new facility. I tried places.sqlite "Roaming", but there is only one with the current date. Is there a way to recover the lost history? Why Firefox was losing it? It's going to happen averytime that updates Firefox?

  Manually back up your bookmarks. If you have used the 'import', you have already lost some information by overwriting. As a matter of course you should always save current bookmarks manually before using any restorations.

  • Restore backup bookmarks or move them to another computer

  This way you can make sure you are able to restore the current set. Your backup .json file put a safe off-trail program or Firefox profile. The desktop of Windows or the removable media would be appropriate.

  Firefox creates a bookmark, but does nothing about backup history. Fortunately Windows probably backup previous versions of your files places.sqlite and this is the database with the history and bookmarks in it. See if you can recover a recent version of this, it will restore your story up to the date of the restored file.

  • http://Windows.Microsoft.com/en-us/Windows7/previous-versions-of-files-frequently-asked-questions
  • the places.sulite file is in the Firefox profile, a hidden folder that is easy to find by searching for defects. See profiles of boards - where Firefox stores your bookmarks, passwords and other user data_how-do-i-find-my-profile

  Then import your latest bookmarks from anywhere where they were rescued. Import replaces the slightly older bookmarks from the Windows file.

  You my wish also can install and run the addon places maintenance.

  • https://addons.Mozilla.org/en-us/Firefox/addon/places-maintenance/

  That can be used to check and repair the places.sqlite database. It will give a brief report. Note If the places.sqlite runs out of space, he begins removing history.

  In the future you my wish to regularly create occasional backups of your profile or at least your places.sqlite

  • Backup and restore Firefox profiles information

• How to replace a laptop HARD drive and restore the backup without a Vista startup disk?

  Hello
   
  I need to replace the drive HARD internal of my laptop and have a picture of it, created using the backup feature in Vista, on an external USB HDD. However, I've upgraded to Vista XP via a download online and don't have a Vista disc.

  How can I create a Vista startup disk that will give access to the backup/restore function, which allowed me to restore my backup to the new HARD disk image once I did the replacement? And is there anything else I forget?

  Thanks in advance!

  Mike

  You can borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  It is General info how to make a Vista startup repair disk:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Restore and recover a single file of data/Tablespace to reclaim space

  Oracle 11 G R2 with node 2 RAC, ASM and Data Guard

  11.2 Solaris

  I have a Bigfile Tablespace TB 5 on Production which has a very large table containing LOB data. Most of the LOBs have been deleted so now the space used is only 200G.

  I need to recover the space (to 4.8) below the high water mark (HWM). We tried all the usual methods (shrink, move, reorg online), but due to the enormous size of the space, they are all would require to take my Production database down for many hours. Also, I have limited disk space to work with.

  In 11 G RMAN skips data file blocks that do not contain at present no data when you save to disk for a backupset.

  I came with a possible alternative to reclaim space with RMAN below:

  1. turn the offending offline data file

  ALTER DATABASE DATAFILE OFFLINE 3.

  2 restore and recover the offending using data file:

  RUN {}

  SET NEWNAME for DATAFILE 3 on NEW;

  RESTORE THE 3 DATA FILE;

  DATAFILE 3 SWITCH;

  RECOVER DATA 3 FILE;

  }

  3. place the new file data online

  ALTER DATABASE DATAFILE 3 ONLINE;

  First: Will this work?

  Second: When I restore this data file, it will ignore the HWM on original table space and restore just the 200 GB of data, or he will restore the 5 TB of blocks used or not?

  Thank you.

  RMAN ignores empty blocks during the backup, but restoration will create the same file size as it has been earlier and restore data later. So you will get no benefit from it.

• Restore and recover Tablspace point in time

  Hello
  
  DB: 9.2.0.8
  OPERATING SYSTEM: AIX 5.3
  
  I want to restore and recover a tablespace to old date(18-Jun-2012).
  
  IM I right by following the steps below.
  
  1. in nomount mode
  
  until June 18, 2012 time ';
  Restore controlfile to '<>';
  
  2 editing mode
  
  until June 18, 2012 time ';
  undo < necessary Tablespace > tablespace system restore ';
  
  3 editing mode
  
  until June 18, 2012 time ';
  undo < necessary Tablespace > tablespace system restore ';
  
  4. alter database open resetlogs;
  
  
  
  What will happen to remaining in the same PB storage.? How the NPC will be defined with other tablespaces and newly recovered tablespace point-in-time?
  
  If I'm missing something, please suggest me...
  
  Thank you

  This will help you

  http://docs.Oracle.com/CD/B19306_01/backup.102/b14191/rcmtspit.htm

• How can I restore and recover the database to a different server using RMAN?

  Hello Friend:
  
  How can I restore and recover the database to a different server using RMAN? I want to implement an enviroument which has a different enviroument and different directories.
  
  That's the two servers. different stored different on each server and a single link, a table library where backup set.
  
  I can only restore and recover the database of the Rman command. Could you give me a demo?
  
  Thank you

  How can I restore and recover the database to a different server using RMAN? I want to implement an enviroument which has a different enviroument and different directories.

  That's the two servers. different stored different on each server and a single link, a table library where backup set.

  I can only restore and recover the database of the Rman command. Could you give me a demo?

  Check this box
  * How to restore Rman backups on a different node when the Directory Structures are different [ID 419137.1] *.

• What restoration brings back old bags in the device? I was always told that icloud restoration brings all the bugs back, yet care apple lately told me than vice versa. I'm lost in a cleaner for restoration of backup: icloud or itune?

  What restoration brings back old bags in the device? I was always told that icloud restoration brings all the bugs back, yet care apple lately told me than vice versa. I'm lost in a cleaner for restoration of backup: icloud or itune?

  I've never heard a backup report bugs, however if you are interested in, you can always restore the device as good as new.

• I'm trying to import and backup/restore/Choose file... / after backup correctly and I see the file, but there is no JSON extension. What can I do?

  I'm trying to import and backup/restore/Choose file... / after backup correctly and I see the file, but there is no JSON extension. What can I do?

  I backed up my favorites using 'import and backup/Backup' on an external HD, installed Windows 10 and went to restore my bookmarks and noticed the file named "Firefox bookmarks-2015-09-04"had no extension and does not work."

  Please advise! Thank you! Sincerely, s

  If you add the .json extension, it works then? Why people who design browsers or extensions them do create files with no extension name, in spite that these extension names are essential to make the files can be restored? I could never understand that.

• How to restore the bookmarks using a Bookmarks.json file, but without going through an import and backup button?

  When I open the Show all bookmarks, it is not an option import and backup.

  Someone at - it other suggestions on who to restore my bookmarks with the .json file?

  Thank you.

  28 Firefox
  Mac OS 10.6.8

  Import & Backup is the third button in the toolbar in the library beside the organize and buttons views.

  In bookmarks (library) Manager is a tool bar with back and next button and three other buttons (organize, view, import, and backup).

  • The first button (gear) is organizing with base change the menu items for the bookmarks
  • The second button is the button in the view which allows you to change the sort order for the visualization of the purpose (sort is not permanently).
  • The third button (Star) is the import and backup button that allows to save and restore a JSON backup and import and export an HTML backup and import bookmarks from other browsers.

  Place each button to display the ToolTip or click on each one to see what they do.

  • https://support.Mozilla.org/KB/how-do-i-use-bookmarks

• Can I reset my MacBook Air and restore the backup I made before to reduce others' storage space?

  Hello

  so I have the 126 GB MacBook Air. My problem is that the other takes 87 GB!

  So can I reset my laptop and restore the backup later like you do with iPhones to reduce the "other"?

  I guess this could work, but I'm afraid something away...

  I hope that there is someone who can help me!

  Thank you!

  There is nothing necessarily wrong with 'other' as long it's documents, etc. that you need.

  Make a backup and a restore just grow what you have now. I would not recommend it.

  If you don't think the number is correct you can reindex to see if that changes it: Spotlight: how to re - index folders or volumes - Apple Support

  These links may also help:

  OS x: what is 'other' space about this Mac? -Apple Support

  https://discussions.Apple.com/docs/doc-5142

• Only, I restored my iPod Touch 4 G. After restoration and reach the homepage, I chose restore backup. Which seems to work but now when I connect the iPod it takes me to the Welcome screen once again. Ideas?

  iPod Touch 4 G, 32 GB, BONE 6.1.6 help with iTunes on a computer Windows 10.

  I restored it and restore selected backup from the Welcome to your new iPod screen. That seems to work, except that it takes back me to the Welcome screen. I tried choose "restore from backup" again, disconnection and reconnection of the iPod, iPod off the coast and back, restart the computer and put the iPod into recovery mode to force it to restore a second time. Whenever I plug in the iPod, it takes me to the Welcome screen. How do I get past the Welcome screen so I can sync the iPod?

  Thanks for your help!

  Try DFU mode, then restore to factory settings / new iPod via iTunes

  How to put iPod touch / iPhone in DFU "Karthik doodles."

  Do not restore sauvegardΘ yet. See if it works when the factory reset. It could be that there is corruption of the backup that is causing the problem.

  S ' there is still not successful that usually indicates a hardware problem and an appointment at an Apple store Genius Bar is in order.

  Shop Apple Store - Genius Bar