TreeView: Line white between the two nodes are not appear

Similar Questions

• How to put a line break between the two strings?

  I'm putting a couple of line between strMessage2 and strMessage3 breaks in the automatic email button in the following document.  What Miss me?  Thank you!

  https://Acrobat.com/#d=hSatmYfM4gqdX1cb-XRVMg

  Win 7, LC 9.0 ES2

  Make sure that you use \n and not/n.

• Is there a membership option that lies between the two that are available?

  It goes 10 images per month to 750 images a month. Shouldn't there be something in between?

  Yes, it should be. But unfortunately there is not at this time.

• Differences between the two custom (or not) versions

  Hello

  When I go to download ESXi, there are a few choices, and I can't find much information about those. For example, there is a version called "VMware-VMvisor-InstallerCD - 4.0_Update1 - 208167.i386_DellCustomized.iso. Now, what is there in this version which is not in the ordinary? I could for example "Dell OpenManage Server" to work on this install ESXi so that I could control my RAID?

  Thank you very much!

  Custom versions are intended for hardware supported for the respective manufacturers. If your hardware is Dell and it's HCL , then you should choose the version of Dell. It has modules specific etc. specifically for the server and can give you expanded opportunities for monitoring etc. If the material is a Dell but not in the HCL do NOT use the specific version of Dell as it can / will probably crash.

• Older versions of the iphoto library are not appearing in photos after upgrade to el captain

  I just upgraded to el captain and impossible to find the other version of iPhoto libraries created to store photos older.  With iPhoto, I used the 'option' key when you open iPhoto and could select one of the old libraries to open.  I do not see them in the new application photos after the upgrade.  Where did go and how can I get back them?

  Oh, BTW, I use Time Machine to backup to a local HD so I hope that the worst of the case here, it is that I have to restore from a backup.  But if this is the case, how to create multiple versions of libraries of Photos?

  Pictures of launch with down option, click on another library and access them. You will need to know or know where they are stored on the computer.

  (137960)

• Scaling on the rendering of the anomalies that are not appearing in the timeline

  Hello
  Just prepare a direct employment to customer preview tomorrow and AE threw me a curve ball.

  I have an object able to evolve from about 200% 70% about and it changes position at the same time. On a lower layer there are a blur value of the camera that is changing. So nothing too taxing, I got thing. When I render - scaling the object appears at the top and bottom and seems twinkle big and small for some images. I tried to make it again, but more or less the same thing is happening.

  No idea what this could be - someone met before?

  Purge the cache using the edition > Purge of orders. Also purge the cache to disk.

  Make sure that you have installed the latest updates ( http://adobe.ly/lsrkmJ ). They solve many problems.

• How to specify the spacing between the two components

  Can specify us the distance between two points on a form? If so, please let us know how?
  
  Published by: user1670125 on July 14, 2010 05:37

  Hello user1670125 (please tell us your name).

  It depends on if you mean vertical (distance between the items on separate lines) or horizontal (distance between the items on the same line).

  A method I use for opening a vertical space between two elements is:

  -establish a single display without label
  -Name it "P #_BLANK ' or ' P #_BLANKn ' (if there is more than one page)
  -give a sequence so that it renders between the two points
  -do not escape special characters
  -give a source value of "< br / > < br / > < br / >" (according to the number of blank lines you need)

  A method I use for opening space horizontally between two elements (assumption here, is that you have defined the second element to not display on a new line and have adjusted the scope of column on other points in the same region to bring together the two fields as needed) - simply specify "& nbsp;" & nbsp; & nbsp; "in the first element display text of item (according to the number of spaces you need to).

  Hope this helps,
  John

• Find the difference of pressure between the two transducers using a NI DAQ 6008

  Hello

  First of all, I'm a relatively inexperienced LabVIEW Developer, so my apologies in advance if this message does not have something, or otherwise lacks clarity.

  I try to develop a VI as follows the pressure difference between the 2 EME 3100 pressure sensors (4-20 my), related to two different pressure lines, using a NO-DAQ 6008. I would like for the acquisition of data to read the two transducers, then have him find VI the differential and write this differential in an Excel file.

  The data sheet for these sensors may be found at: http://www.gemssensors.com/Products/Pressure/Pressure-Tranducers/Sputtered-thin-film/~/media/GemsNA/...  It is a 3-wire system, with a voltage between 8 - 24V. I use an external power supply of generic brand to power sensors, which provides a maximum of 24V @ 4A.

  I drifted my physical connection (for the two transducers) this thread http://forums.ni.com/t5/LabVIEW/I-am-having-trouble-Omega-PX4200-Pressure-Transducers-to-where-I/m-p... and am relatively certain of the accuracy of the information. For purposes of signal conditioning, I use a 500 Ohm resistor between the signal of each transducer and the Earth wire.  On the side of software, I use the latest version of LabVIEW (2011) as well as MAX on a Windows 7 64-bit machine.

  In an ideal world, the sampling rate would be as high as possible, but 4 samples per second would suffice for all purposes useful.

  Given this goal, are there any sample of VI (especially for MAX, which I have not yet used) who would be similar/applicable to this project, specifically, regarding setting a sampling frequency, calibration of the transducers or affecting the pins/channels appropriate? All resources would be greatly appreciated.

  Kind regards

  MG Wilkinson

  Measure the voltage between the two resistance (resistance by probe 4-20 MA) using the differential inputs of the x 600.

  When you configure the task, you can read several entries at once, by entering in "Dev_ / AI0:1" in the physical channels and using the "several channels / {unique |}". multiple} samples"polymorphic instance.

  600 x can read 1kS/sec.

  Do maths/conversions on the table, and then simply subtract the two tables.

  Could also take some samples (10-100) at 1 kHz and their average together, give you a smaller rate effective sampling but with less noise.

  A loop of producer-consumer would be good architecture here, let the daqmx reading live in a loop and sends the data via a queue to a 2nd consumer that performs mathematical operations and write to a file.

  

• [INS-06006] Connectivity SSH without password do not put in place between the following nodes.

  Hello

  I'm currently building the cluster by RAC 11 GR 2. I try to install Oracle Grid Infrastructure Oracle Linux 6.4 (x86_64bit) machine - node1.abc.com.

  I'm at the stage of the "Cluster Node Information" where I have to provide me with the list of nodes to be managed by the Oracle grid Infrastructure. Currently I have added just me - node1.abc.com with the name of the virtual IP address - node1 - vip.abc.com. The two host name and virtual IP addresses are registered on the DNS server - it is also installed on node 1. Before adding the second node2.abc.com, I was testing SSH connection but it fails. I clicked the [SSH_Connectivity...] button and in the OS Username (grid) and his password. When I press the [Setup] button, it pops up message successful "Able to establish connectivity SSH without password between selected nodes." But when I click on the [Test] button or the [next] button, I get error - ' connectivity [INS-06006] SSH without password, do not put in place between the following nodes: [node 1].» What is the problem and what exactly to do to avoid this error?

  
  

  Thank you
  

  It was because I assigned a real static IP address for the second NIC eth1. With this affected YES wouldn't let you go to the next screen. So I had to remove NIC out of my laptop. But if eth1 is not resolved by the DNS name it also gives you errors. So I guess a correct functioning is I would sign up eth0 and eth1 to the DNS server but eth1 does not have real IP. Then I could go to the next screen.

• Using the built-in function in the definition of the relationship between the two blocs.

  Hello
  Is it possible to define a relationship between two shaped blocks (db based)...
  I have a main table such as:
  Table: strdet (passes: ms varchar2 (10), det varchar2 (10))
  materialized view: mv (passes: det varchar2 (10), sum_a number (5), sum_b number (5))

  and data:
  
  strdet
  
  -------------------------
  
  ms                   det
  
  1                     1.1
  
  1                     1.2
  
  1.1                  1.1.1
  
  1.1                  1.1.2
  
  1.1.1               1.1.1.1
  
  ....
  
  e.t.c.
  
  
  
  and for the mv
  
  --------------------------
  
  det               sum_a     sum_b
  
  1                   500        300
  
  1.1                100        200
  
  1.2                540        150
  
  ................
  
  e.t.c.
  
  
  
  I have tried some versions of relations so as to create a master-detail relation(in reality , the two blocks are connected via ms.det 
  
  ->mv.det...  but the relation is one-to-one....) . I want a result such as:
  
  
  
  Master block
  
  ------------------------------
  
  1.1
  
  
  
  Detail Block
  
  ------------------------------
  
  1.1.1
  
  1.1.2
  
  ....
  
  e.t.c.

  Is it possible somehow?
  
  Note: I use Dev6i and Dev10g...
  
  Thank you
  SIM

  I think you need to use a query clause for the retail block. If you join the main table and the mv on the DET column, so you can give each line in detail, block a MS (from the main table) column that you can use in the relationship.

• Torn between the two

  Right now, I currently own a normal laptopn who weighs about 5 lbs. Computer of mg is a pain to get to school or to visit family in the city. Lately I've been saving up for a new device. An iPad or a Macbook? I'm torn between the two. With the iPad, I still keep my computer (which I've had since 2013) and use of the iPad to do on the go with naoual or buy a new computer in her car again

  Thoughts?

  The decision between a laptop and an iPad must be made according to what you are going to use the device for, and what limits you can live with. You do not have access to the internal file system of an iPad, so you should have save things in different places. Many have things saved in a particular application, or you can use things like Dropbox. The iPad does not also allow to connect to an external device such as a USB key. Internet access must be a wi - fi connection, because you will not be able to plug an Ethernet cable into the iPad, if you are in an area where there is no wi - fi, except if you have an iPhone you can attach to internet access. While a lot of newer laptops have no CD/DVD players, you can buy those external that connects via the USB port, which is something other non available for the iPad.

  I suggest make you a list of what are your needs and desires and then compare the specifications of the two types of devices to make your decision. I just you provided with a couple in the thought process.

• I can't stop finite samples daqmx read between the two?

  Hi all

  I want to read data from 10 seconds to a trigger is received. for this im using daqmx task finished sample mode and read the data on the trigger getting. It works fine but I can't stop my vi between the two when its reading of the data. I have to wait for it to complete the reading of values, and then stop the vi.

  so I switched to continuous sampling mode that allowed me to stop the vi whenever I want.

  I just want to know is there any means or the property using which I can stop my task over daqmx read when I want?

  I guess you call DAQmx Read with extraordinary value (-1) for samples of #.  It is also the default if left thread continues.  In a finished sample task, it means to wait until the memory full buffer has been filled with samples before returning.  Once you make that call, you cannot directly finish soon.  You're stuck waiting for buffer fill or for the timeout expires (default 10 seconds).

  One way to avoid getting stuck is not to ask for samples that do not exist already.  You can query a DAQmx Read property, known as the "Samples available" or something like that and son of this result in a call to DAQmx Read.  Such a call will return immediately whatever data are currently available.  Subsequent calls will give you samples.

  -Kevin P

• Not sure of the difference between the two registry paths.

  HKEY_LOCAL_MACHINE tools\msconfig\startupreg\

  entries are stored here, program under key and others, how are they different from the entries stored here...
  HKEY_LOCAL_MACHINE tools\startupreg\
  They two have something to do with starting. someone with a little know-how in this field could be a great help.
  What is the difference between these two and what not the keys of each way folder. ?

  If it is any help, I checked my xp, vista, and win7 and they all have this branch of the registry but it is empty of all keys. for example empty:

  HKEY_LOCAL_MACHINE tools\msconfig\startupreg\

  and none of the bones had the other key that you mentioned. I do not use quicktime, so this may be the reason why.

  If I had to guess with analysis and fiddling with the registry since it was invented by microsoft, registry branch I have is 'standard '.

  While the secondary registry branch that I don't have is "non-standard" and probably created by quicktime or other software during installation.

  These registry branches are created because the manufacturers software third differring depend on utilities such as quicktime will be writtened to find the key in the registration or another branch.  If the additional branch and keys are added for extra measure by quicktime or other programs.

  I think that in your particular case, only quicktime can tell you why they need to put their keys in 2 different branches.  but its likely that my logic above explain the reason for being.

  HTH.

• Switch between the two alternative provisions (both in portrait mode)

  I have created two alternative facilities for the purpose of these two being in portrait orientation, as they are to view the same article in two different languages. Is there a way to switch between the two using the navto: / / action or by using bookmarks and by using the go to destination. I tried both but I was wondering if there was something there.

  I have a publication ideally appearing in both languages, though being a main language and the seconary being there only for reference. I'm not wanting to produce two folios and use the filter region with Apple, as have the secondary language, as a reference is a selling point for the publication. Also using"States" would be more complicated.

  He must choose between non-ideal solutions, as a magical sticky toggle 'use this language' is not available.

  If you do mind ' t using the rocker on each page, then navto would be OK. and each page of the reference language should have a back button go. All reference pages that can be marketed after the main pages, and each of them can be hidden from OCD.

  If you opt for parity between languages, then you could start the app with no menu-swipable selection page, where you can decide what language to use. At the end of these two sections, another non-swipable page would give you the choice to read another language. The trick of no-swipable page gives users a feeling of an application of the only language of his choice.

  And I would use diapers, not another layout for the production. Seems to be a cleaner solution for me.

• Switch between the two button symbols

  Hello

  I'm new to AS, but not new to programming.  I'm using Flash CS4.  Here's what I'm trying to do.

  I have two button symbols, PlayBTN and PauseBTN. They are used to control the playback of the slideshow. When I use one or the other to control the slide show, it works. However, what I want to do is to switch between the two buttons, so that they work together like this:

  1. If the slide show is playing, PauseBTN is visible. If PauseBTN is clicked, stops slideshow and PlayBTN becomes visible.

  2. If the slideshow is paused, PlayBTN is visible. If PlayBTN is clicked, stops slideshow and PauseBTN becomes visible.

  In other words, clicking on the button control not only the slideshow, but changes which button is visible.

  I got this working with a video clip of two frames and bitmaps in static, but when I swap the bitmaps for the buttons, rollovers button stop working.

  Can someone give me some advice please?

  ... Mike

  This is not a flexible configuration.  PauseBtn should be a movieclip with a up more and eventually to the bottom of chassis and PlayBtn either a movieclip with a up more and eventually to the bottom of the frame.  You can then use:

  PauseBtn._visible = true;  or false ot visible property of your control button.