Restore a data file has been added
So here is the situation that I am:A customer has a backup from August 1, 2010 with all archivelogs since then until now. They need restore such backup to another server, but a data file was added to the database, August 8 and no database backup was taken, but there is an automatic backup of the controlfile. If I can restore to the other server with what I have?
I thought up the database using the controlfile autobackup on August 8, and then restore and recovery, but who could make me ' backup of the data file x not found ' errors?
Or can I do a simple restore and recover with the backup on 1 August and just apply all archivelogs as usual?
Any help would be appreciated. Thank you
-Oracle 10 g 2 SE on Linux btw
Hi oscrub,
If I can restore to the other server with what I have?
Yes, either controlfile it doesn't matter.
that could make me ' backup of the data file x not found ' errors?
No, not in 10g, during the recovery of the file is recreated by oracle.
(BTW this won't work for ordering duplicate rman 10 g)
Or can I do a simple restore and recover with the backup on 1 August and just apply all archivelogs as usual?
This will work as well.
Kind regards
Tycho
Tags: Database
Similar Questions
-
How to restore all my files has been deleted.
If Microsoft Security Essentials said that my computer has been infected. I clicked on the cleaning of my computer button, then a minute later all on my computer has been deleted. Please tell me how to recover my business. I need an answer as soon as POSSIBLE...
Hello
Your files have probably been infected and therefore has been removed.
Check if this article helps to recover your lost files.
Recover lost or deleted files
http://Windows.Microsoft.com/en-us/Windows-Vista/recover-lost-or-deleted-files -
How to recover data if a data file has been lost
If I have a tablespace with 5 9i or 10g data files...
It's a fictitious scenario :)
one was lost when starting db
and other 4 remained thre
If no backups available for no archivelog to recreate the data and restore file
How do I in this tablesapce of data recovery?
Thanks in advance!
BR/rickyIf you
a. Partition Table
b. put each Partition in a separate space
c. for datafile (s) of each storage space, use a separate disk (or set of disks) such that no two storage spaces are on the same disk
...You then able to reach the level of "fault tolerance" - may be because the data file will also drive goes wrong (and two data files or storage on the same disk goes wrong makes life difficult!)
except that... your question was an exercise. Only that you have changed the rules in between!
-
DB data file has been deleted... !!
Dear all,
Without knowing it, the data file was deleted from the file system of the server...
It was an accident...
and now the PB does not come...
It shows as:
SQL > startup;
ORACLE instance started.
Total System Global Area 581523028 bytes
Bytes of size 456276 fixed
402653184 variable size bytes
167772160 of database buffers bytes
Redo buffers 10641408 bytes
Mounted database.
ORA-01157: cannot identify/lock data file 12 - see DBWR trace file
ORA-01110: data file 12: ' / proddata/testdata/ts_test01.dbf'
How can I recover the DB to its original state.
Please update... This is essential for us...
Thanks in advance...If you want to get rid of this message and must implement the database without this data file;
ALTER database datafile ' / proddata/testdata/ts_test01.dbf' offiline.
ALTER DATABASE DATAFILE
DROP offline
or
ALTER DATABASE DATAFILEoffline drop offline must not be used unless you know what you're doing...
the other is "safe". You can online again.
-
Find the time to restore a data file
RDBMS version: 11.2.0.4
Platform: Oracle Linux 6.4
To test our backup RMAN Tape (Netbackup), we have created a table called BACKUPTEST with a single space data file.
Then, we have removed the data file. Then was restored and recovered with RMAN's data file and tablespace was again online.
I wanted to show the evidence to my manager that the data file has been restored. But v$ datafile. CREATION_TIME will show the time when the tablespace is imagined. Is there another way, I could find the time when the data file has been restored other than log RMAN.
Below is an excerpt after the data file has been restored.
$ sqlplus / as sysdba
SQL * more: Production of the version 11.2.0.4.0 Fri dec 19 15:08:03 2013
Copyright (c) 1982, 2013, Oracle. All rights reserved.
Connected to:
Oracle Database 11 g Enterprise Edition Release 11.2.0.4.0 - 64 bit Production
With partitioning, Real Application Clusters, Automatic Storage Management, OLAP,.
Options of Data Mining and Real Application Testing
SQL > select TABLESPACE_NAME, status of dba_tablespaces where nom_tablespace = 'BACKUPTEST ';
STATUS TABLESPACE_NAME
------------------------------ ---------
BACKUPTEST ONLINE
SQL > alter session set nls_date_format = "DD-MM-YYYY HH24."
Modified session.
SQL > select CREATION_TIME of v$ datafile where FILE # = 78;
CREATION_TIME
----------------
19/12/2013-12:16
SQL > select CREATION_TIME, last_time v$ datafile where FILE # = 78;
CREATION_TIME LAST_TIME
---------------- ----------------
19/12/2013-12:16
SQL >
19/12/2013 12:16 is the hour when the tablespace has been created with this data file no time, it has been restored from a backup RMAN.
Check the alert.log. There will be messages about the RESTORATION and RECOVERY actions.
Hemant K Collette
-
See ' file has been changed outside RoboHelp... discard changes?
I use: RoboHelp HTML, Version 10.0.1.292
I see the following message when I make changes within the RoboHelp project, then choose close my project without saving the changes. He is not a consistent behavior - it happens for some help in the project files, but not all the help files. If I save the changes then it is not.
My steps:
1 - Open RoboHelp (I use RoboHelp 10) and a simple text to put in place a help topic.
2 - Choose file > close the project.
3 - Click on no when the confirmation "Save the changes to the following files?" appears.
It's when I see the above message. The message is confusing for several reasons: 1) did not change the file outside the project, 2) I don't know what changes are being ignored if I click on Yes, and 3) which is loaded when I close the project.
Full disclosure - the only file I ever change outside the project's CSS and I'm guilty to change the CSS with the open project (in order to instantly see the results of my changes). This could be the cause even though I have not touched the CSS in well over a year? There the old crud stuck in memory for some help topics? I've never seen this message before and I worked on this project for many years.
Other tests - this message is popping up for an added help topic recently so I don't think it's related to CSS changes until the file has been added. No other files have been published outside the project I can think.
Post edited by: Tricia Trujillo
Perhaps with a copy of the project, try to remove the CPD file and then see if the offending subject still shows in the project manager.
Fine with Jeff's response first.
See www.grainge.org for creating tips and RoboHelp
-
I just did a photoshoot and lightroom tells me that my files are not supported by lightroom. He said that lightroom is up-to-date. I have a subscription to the cc can't use lightroom. Please tell me that there is an easy solution
There is an update of Lightroom since the d5500 has been added has been released. I suspect will add it to the next update or upgrade. In the meantime, you can use the DNG 8.8 converter to create negative digital copies that can be opened with the current versions of Lightroom.
-
When Photoshop cc supports raw files coming from the Nikon d5500 has been added?
Hello
When Photoshop cc supports raw files coming from the Nikon d5500 has been added?
IAM a happy Photoshop user, specially for my files raw... I find it frustrated that I can't work on my files at the moment...
Greatings Danny
The d5500 has been added just launched and Adobe working on support. Can't say how long for sure, but it should be a month or two. Meanwhile, you can shoot in NEF + JPEG and set Camera Raw to open your JPEG files as well. Not much data, but will be better than nothing...
Benjamin
-
ORA-01152: 1 no file has been restored from a sufficiently old backup
Hi all
I have restored my database,
and after it's over, I've tried.
RMAN > alter database open resetlogs;
RMAN-00571: ===========================================================
RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
RMAN-00571: ===========================================================
RMAN-03002: failure to modify the order db at 2010-05-26 14:53:08
ORA-01152: 1 no file has been restored from a sufficiently old backup
ORA-01110: data file 1: ' D:\ORACLE\BISE1\ORADATA\BISE1DB\SYSTEM01. DBF'
is there a solution to the situation?
Thank you
UgurHere is the explanation:
ORA-01152: file string has not been restored from a sufficiently old backup
Cause: An incomplete recovery session was launched, but an insufficient number of logs have been applied to standardize the data base. This file is always in the future than the last applied log. The most likely cause of this error is forgetting to restore the file from a backup before proceeding with an incomplete recovery.
Action: Apply more marbles until data is coherent or restore the database from a previous backup and recovery of repeat file.
Also, check out the following link:
http://oraware.blogspot.com/2008/05/ora-01152-file-1-was-not-restored-from.htmlPublished by: Kamran Agayev, a., 26 May 2010 17:02
-
always get the files "prohibited" a a person who has been added to "sender".
I always get "Prohibited Files" of a person who has been added to "sender". I tried for a month to get these files. They are very important, I need these files. This is very aggravating. HOW CAN I OPEN THE FILES?
Hello
· What happen when you try to open the files?
· When exactly do you get the message?
· What exactly do you mean by prohibited files?
Response with above information to better help you.
-
Elements 14 not opening not d5500 has been added RAW files
I just bought a Nikon d5500 has been added. List of cameras supported Adobe has the d5500 listed has been added. I just installed PS 14 items. I did the update to Camera Raw plugin and have the latest version, 9.5.0.585. And it STILL not open the RAW files. What I am doing wrong?
Thank you!
Sue
AuntSewsie wrote:
Here is some info that may be useful. 14 items, I can open the RAW files from my Nikon D5000 older but not the most recent d5500 has been added. Also, when I said that I couldn't open the NEF files in Windows, I was in Windows Explorer. The files will BE opened in Windows Live Gallery. I am confused of all this! Help!
Sue
Windows Explorer cannot display thumbnails for raw files, unless you have some kind of third-party codecs.
Windows Live Gallery can display the jpeg thumbnail embedded in the raw file, but don't do not convert and display the content of the raw file.
What happens if you download files directly from your card reader or camera on the downloader withou with ViewNX elements?
In addition, older versions of ViewNX are known to corrupt Nikon raw files.
-
I am considering buying a NikonD5500, but one of the comments said that RAW NEF files are not compatible with lightroom. is that correct?
[Ask in the correct forum allows... Left generic Cloud/Setup forum for forum specific program... MOD]
Not correct.
Nikon d5500 has been added RAW NEF photos are indeed compatible with the current version of Lightroom (6 Lightroom or Lightroom CC 2015)
-
Hello
I recently bought Adobe Lightroom CC and installed on my MacBook Pro OSX running 10.11. However, when I try to open the FIRST (.) NEF files) from my Nikon d5500 has been added I get the following message 'the following files were not imported because they could be readable.' as can be seen in the screenshot below:
I am also under the latest version of Lightroom CC with Camera Raw 9.2 and I read that the Nikon d5500 has been added was supported Camera Raw 9.0
The files open fine in CC Photoshop so I don't understand why they don't open in Lightroom CC.
Someone can help or Lightroom CC not actually does support for the Nikon d5500 has been added RAW files?
Your import asked Lightroom to copy pictures to a folder that does not have write permission. Determine which folder you want to copy the photos to (it's in the Destination of the import dialog section), then go to your operating system and make sure that this exact folder Lightroom has WRITE permission.
-
Nikon d5500 has been added: cannot open Raw files in LR 5.7
Hi just bought d5500 Nikon has been added I have lightroom 5 that I have updated to 5.7 I can't download raw files
The d5500 has been added has been initially supported by Lightroom 6/CC.
Devices supported by Camera Raw
You will never be able to open this camera Raw files in LR 5.7.
Options:
- Update to Lightroom 6,
- Join the Cloud
- Download the free Adobe DNG converter, convert all d5500 has been added Raw files to DNG, and then change the DNG files in LR5.7
Using Photoshop | Digital Negative (DNG)
Camera Raw: How to use Adobe DNG Converter - YouTube
-
Lightroom does not recognize my Nikon d5500 has been added m NEF files, is there a way to get around this or if I switch to CC it will recognize these files?
The d5500 has been added has been initially supported by Lightroom 6/CC
Camera Raw plugin | Supported devices
Free option: download the Adobe's DNG Converter, convert all d5500 has been added Raw files to DNG, and then change the DNG files in your version of Lightroom
Maybe you are looking for
-
Hey Gang, I have developed a driver for the client using a PCI-6601 and DAQmx embedded application. Now that we are in the deployment phase, the customer is shocked by the size of the NOT-MAX. (a rudimentary facility is about 1.5 GB) The only part
-
My grandson downloaded the preview of windows 8! and I can't get Windows media Center? It worked well on windows 7, but all I can get now is windows Media Player. How can I return to my windows 7 and how can I get my windows media Center.
-
Original title: computer viruses. If I have a virus and I restore my computer, the virus will come back to the computer when the files are restored.
-
Can't remember how to create a debug token
In previous versions of the SDK, I didn't hurt to make it past the stage of creating a debugging token, but for 10.0.9 I am stuck. A dialog box appears allowing me to select my developer certificate, what I do, but it's also requires me to fill: Path
-
New computer and can not get the HP Photosmart C5180 all-in-One Printer to install and work
I downloaded which, in my view, is the correct driver and mild wear. I had to get one new computer, my other crashed, I can't install the software that came with it because I now use windows 7. However, he has worked in windows 7 on the other compu