See ' file has been changed outside RoboHelp... discard changes?

Similar Questions

• 2 months Time Machine backup file has been changed recently and is not the old version of the file

  Good, then me Riddle this dear sweet people. I want to get an older copy of a file that was accidentally changed in recent days, according to me. I went to time machine and found that the file has been changed recently even if the backup of the States, she was saved 2 months ago. YGBFKM

  The reason for which the whole I support is to avoid this specific scenario. What is the backup if it is not the data from the date it was supposed to be archival?

  I would like to understand what has happened even as I and version current source of REAL backup software and ACTUALLY back up my data.

  Michael

  10.11.5 OS

  (21.5 inches, end of 2012)

  Intel Core i5 at 2.7 GHz

  8 GB 1600 MHz DDR3

  NVIDIA GeForce GT 640M 512 MB

  * bump *.

• Message saying "this file has been modified outside Illustrator" CS4 on a PC

  I get a problem when I worked on existing files then Ctrl & S, about 90% of the time that I get a warning message saying

  "This file has been modified outside the Illustrator"

  When he did not clearly. It is not down to there links used on the file I get two files with and without pictures on inside e.g. psd, tif, jpg.

  What is - this all about it is quite annoying?

  Thank you

  Jen

  You're welcome, Jen.

  There may be a few things to do/avoid/knowledge in relation to the sharing network:

  If the server time differs from yours, which can cause the problem; You should be in time. It is the same for anyone who can open the file.

  Speaking of which: If someone else check it in another application, which in itself can trigger.

• Backup error Windows - the volume for a file has been changed outside...

  I had this error with Vista n now with 7 and killed a few cd trying to figure out.  I get the error even if the CD is formatted first or not.  However, I can't get my backup to run.

  Any ideas?  Or any step-by-steps that I should try?

  I had this error with Vista n now with 7 and killed a few cd trying to figure out.  I get the error even if the CD is formatted first or not.  However, I can't get my backup to run.

  Any ideas?  Or any step-by-steps that I should try?

  Hey QEDDave

  It's an instance of vista installation

  Read how to back up vista on the link below

  http://www.vista4beginners.com/how-to-backup-your-data

  Get to know windows 7 below

  http://www.Microsoft.com/Windows/Windows-7/features/backup-and-restore.aspx

  http://www.howtogeek.com/HOWTO/1838/using-backup-and-restore-in-Windows-7/

  and here's the forums windows 7 for you to repost in

  http://answers.Microsoft.com/en-us/Windows/default.aspx#tab=2

  Walter, the time zone traveller

• MS 12.0.1: Bug? No warning of this file has been modified, without asterisk indicating the file has been changed

  

  If I make a change to the schema, an asterisk appears next to the schema name on the title as well as the Design tab bar.  If this asterisk appears, then when I try to close the file, I'm notified that I will lose data, such as...

  

  And if I select a unique NET in schematic view and make a change to a setting for this net, MS shows that asterisk, and it is all very well.

  The problem comes when the spreadsheet view is open.  If I change a setting for a net in worksheet view, the change is accepted, but the asterisk updated the file does not appear.  And if I try to close the file, I don't get the same dialog box warning as shown above.

  Hello

  I had this issue along. Thanks for the thorough testing

  Kind regards

• Get a prompt with each change "the"abc.php"file has been changed."

  Hello

  I get the prompt with every change I have made to a file since Dreamweaver 2015.2 PHP version 7884 Build as shown below:

  

  Some sources recommend unchecking the checkbox 'Save files before putting them', but it is already disabled in my DW:

  

  What is a DW of expected behavior for a modified .php file? My encoding speed is hampered by the frequent instigation.

  Please tell me how the guest can be disabled.

  Thanks as always,

  EAD

  Choose the mode of creation instead of the Live view mode.

  This is because the Live view mode must be updated by saving the file when using scripts server side, for example PHP

• Firefox Help my firefox top bar has been changed, I used to be able to get the file to bookmarks Format printed, and other services that I have found useful when you take information from the internet, where they went, I want them back?

  Firefox help

     Search
  

  "Found 0 results for" my firefox top bar has been changed, I used to be able to get the bookmarks printed Format file, and other services that I have found useful when taking information from the internet, I found bookmarks to the right of the new game to the top, but it seems not instantly friendly where they went, I want that they come back? »

  See:

  • https://support.Mozilla.org/en-us/KB/menu%20bar%20is%20missing

• Clock set to date before January 1, 2001. Pop - ups require to accept incoming network connections for: krb5kdc, cups-lpd, MDNSResponder, configd. File system ARDAgent.app has been changed and cannot be repaired by disk utility. Files repaired permissions

  As soon as that connected with the password, the clock is set to date before January 1, 2001. Pop - ups require to accept incoming network connections for: krb5kdc, cups-lpd, MDNSResponder, configd. File system 'System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent' has been changed and cannot be repaired by disk utility. Files permissions were repaired by disk on the install disc utility. How can I stop this?

  Am also using Firefox 43.0.3 browser like Safari.

  'System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent' has been changed and cannot be repaired by disk utility. Files permissions were repaired by disk on the install disc utility. How can I stop this?

  You can ignore the above.

  Utility disk - permission errors, you can ignore

  System preferences/Date & Time/Date & time - is it set to automatically set the date and time?

• My hosts file has been damaged. I can't change the corrupted file

  My system hosts file has been corrupted by some types of malware. I'm stuck to go on sites like google and youtube.

  I have windows xp family

  I know what I need to change in the hosts file, but I can't change the attributes. I tried to use Notepad, but it does not record.  I guess that's because it is readonly and a file system. I tried to use the cmd commands and attribute... does not work.  Don't know how to change the hosts file.

  Any help would be appreciated.

  Thank you

  .

  Hello

  How to reset the default hosts file?
  http://support.Microsoft.com/kb/972034/en-us

  The Hosts file and that it can do for you
  http://www.bleepingcomputer.com/tutorials/Tutorial51.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Sharing multimedia files has been disabled because a windows required setting or a component has changed.

  Earlier today, I was a game on my Xbox 360 and decided I want to play music in the background, using the guide of 360.

  I went to "Select Music", searched my PC in the devices menu, and it does not appear. This has happened before, I just figured out my PC was in place. I went to the 360 Dashboard and looked back to the server. He has not yet shown upward.

  I went to Windows Media Player on the PC that I share the media selected in the dropdown under library and went to share multimedia files. (Here's where it gets confusing...)

  He gave me a message saying "sharing multimedia files has been disabled because a Windows setting required or a component has been changed." I hit very well, and I went back to the sharing of multimedia files. Now, I had the option to check the box "share my media". I checked, hit OK, made sure everything was good to go. The unit has not yet appear on the dashboard. I went back to the sharing of multimedia files. To my surprise, I received always «sharing multimedia files has been disabled...» »

  This is the part of the confusion: if I turn on media sharing, Windows it cuts back.

  I tried all the solutions online that I could find, which includes deleting the files in the Windows Media AppData\Microsoft folder. Register a dll to the administrator. Ensuring that you have the "Windows Media" folder. All take very well.

  Basically I narrowed down it to: nothing works.

  Each person could fix their problem by using the solutions proposed in other posts on other forums/blogs. Mine is recurring. In addition, my media is on a separate internal hard drive, which I added to the Windows Media Player files to add multimedia elements. I went and deleted from here. I still have the problem of sharing.

  All said Microsoft is to restore your computer to a previous state. It's not really useful. I don't want to go just restore. I want to fix it where. In addition: restoration would not help, I don't know how long this problem exists, but I have not known about it.

  
  

  -Very well, after a fresh reformat the hard drive and re-installing Windows, I finally reduced the problem.

  I have not had ANY problems with the computer... Until I installed my Adobe CS5 Master Collection again.

  It turns out that the part of the Adobe Acrobat 9 Pro Extended software called Adobe Presenter 7 causes the sharing to go haywire.

  I deleted Adobe Presenter 7, and just like that, sharing has increased again.

  In addition, Adobe Acrobat 9 was causing my sidebar to go haywire, so I advanced and which takes off as well.

  Have not had a problem since.

• my files and foloders cannot open because the path has been changed

  HELO

  After I got all my documents are gone b4 has my eyes, some time ago, I was not able to recover them, but I DID NOT REMOVE ALL of THEM.

  I did a search on the button start Search for files and found them there - but only the titles that I click on one of the files are a 'pop-up' box States "the element ie... Book.XLX that this shortcut refers to has been changed or moved, so this shortcut will work more properly"

  I know that they always there - I think that the path of the folders and files were changed because I have change a few things to try how it worked on my system

  I also worked my desktop shortcuts

  Can someone explain pls?

  Thank you

  M

  Hello

  You can try to activate hidden folders and check.

  Go to folder options and view records, files and hidden folders.

  For more information, you can consult the following article:

  Show hidden files

  Hope this information is useful.

• The item 'xuiexi.scr' that this shortcut refers to has been changed or moved, so this shortcut no longer works correctly

  Original title: problem with the shortcut "xuiexi.scr".

  When I try to open my files I get a notice that says: PROBLEM WITH SHORTCUT.  The item 'xuiexi.scr' that this shortcut refers to has been changed or moved, so this shortcut no longer works correctly.  You really want to remove this shortcut?  YES / NO

  What can I do to recover these files.
  Thanks in advance for any help.
  NW

  Hello

  (1) remember you to make changes to the computer before the show?

  (2) is that limit this issue when opening specific programs?

  You can perform the following methods.

  Method 1: I suggest you to run the Microsoft Fixit article.

  Fix broken desktop shortcuts and common system maintenance tasks: http://support.Microsoft.com/mats/system_maintenance_for_windows/en-us

   
  Method 2: Run Virus Scan

  You can download Microsoft Safety scanner, which provides on-demand scan, and remove viruses, spyware and other malicious software. It works with your current antivirus software.

  See the link below to download Microsoft Safety scanner on the system.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  Note:
  The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
  WARNING:
  The data files that are infected can be cleaned by removing the file completely, which means that there is a risk of data loss.
   
  It will be useful.

• Skip (project) to check, because the apk file has not changed.

  Hello all, I get the message 'Skip (project) to check, because the apk file has not been modified' in the error log when I'm checking an Android APK. Since I donot have required a device or a simulator (lack of processor), I'm not able to test the signed .bar file generated by ignoring the message above.

  Please can anyone suggest a solution for the question do face. Thanks in advance.

  Hey there,

  I see something like:

  "Skip ProjetTest to check, because the apk file has not changed."

  in my Console, but not in the error log.

  If it is in the console, it's just a normal journal letting you know that the tools didn't need to check again because the project, including the manifesto, has not changed quite significantly between runs you need to double check.

  Justin

• One more time: Houston-25014: the record has been changed by another user. Please try again.

  Hello

  JDev 11.1.2.4

  I have a workflow where I execute with params VO, and then navigate to a view activity. On this page fragment, I click on a button that calls a PL/SQL procedure in the module of the application. The proceduce updates a row in the table. After this method call, I navigate to the same run with params.

  Execute with params-> view activity method-> call-> Execute with params (the app module method)

  But I have an exceptional:

  oracle.jbo.RowInconsistentException < DCBindingContainer > < reportException > [2669]: Houston-25014: the record has been changed by another user. Please try again.

  at oracle.jbo.server.OracleSQLBuilderImpl.doEntitySelectForAltKey(OracleSQLBuilderImpl.java:1078)

  at oracle.jbo.server.BaseSQLBuilderImpl.doEntitySelect(BaseSQLBuilderImpl.java:552)

  at oracle.jbo.server.EntityImpl.doSelect(EntityImpl.java:8311)

  at oracle.jbo.server.EntityImpl.populate(EntityImpl.java:6975)

  In the log, I see the error.

  Compare entity < EntityImpl > < compare > [2305] has no attribute Addr1

  < EntityImpl > < compare > [2306] original value: COURTUPD

  Target value < EntityImpl > < compare > [2307]: COURTUPDfewfew

  The update in the procedure updates this field. The procedure performs validation, I made the call.

  I suspected that the case of ghost ADF so I put update on update for this field, but it does not work.

  Any idea on who is the user who changes my file without telling me?

  Thank you

  You have something in your entity that has changed.  Call rollback on your transaction module app before executeWithParams put it in a clean condition.

• Your copy of disk image has been changed since the last opened or saved (Mac OS)

  I sometimes get a message that "image disk copy has been changed because the file has been modified, opened or saved. The OS 10.6.6 and I use CS5. It happens on any specific file. All my files are big enough. The current that what happens on is a body which is 3.26 G not flattened. I have the ignorance has always ignored the message and saved anyway. I never detected damage or noticeable changes in the files after ignoring the warning, but after looking for Adobe forum and read a thread on what is happening in CS4, I guess I should be more careful and do a save as and change the name of the file. I started this thread because no one reported the issue happening in CS5.

  The files have been all given to me by ftp as psd, tiff or raw camera files.  I work on the copies of the originals in no other program but photoshop and open and closed files several times before getting the message about disk being edited copy. All my files are saved on a hard drive internal and backed up to a time capsule device. I am on a network, but I'm the only user of the network. The files are worked and saved on an internal hard drive on the same computer. They are never open on another computer which is usually disabled. I don't use any antivirus software except what is native to the operating system. The only other applications that I am running when this message are safari, mail and sometimes fill.

  Why I get this message and what is causing changes (which I can't find) to disk copy?

  The message means what it says: something outside of Photoshop changed your file on disk since the time that Photoshop saved the file.

  We do not know what might change them - just the operating system returns a different modification to the file date that applied when Photoshop saved the file.