Restore Failed - reason 0xd000001e

Similar Questions

• can't connect now system restore failed - reason 0x000001d click OK to restart the computer.

  Original title: restart my vista erros, can't connect now system...

  I have the product key of windows vista edition Home premium... When I restart my laptop, it is clear that restore failed - reason 0x000001d click OK to restart the computer.

  I can not connect the system as well as the security model. When I turn on the screen shows BOOTMGR IS MISSING press CTRL + ALT + DEL TO RESTART. He appears again any reboots it.

  The only thing I can do is the connection configuration of the bios.

  What can I do next?

  Thank you

  Hello

  See the following article:

  Windows Error message "Bootmgr is missing Press Ctrl + Alt + Del to restart":

  http://support.Microsoft.com/kb/2622803

• Vista Start black normal & all Security Modes, restore fails, screensaver ŒUVRES

  Yesterday (18/06/09) I installed a few new updates, but is not a restart.  Today, the system was sitting idle (, but nobody use it) and we had a power failure.  Restart the system wanted to make a volume control.  During the audit, he found a bunch of bad index entries.  The files went flying by pretty fast, but I could tell that many of them had something to do with Media Center.  Then later in the repair of the volume, she added a bunch of orphaned files.  I couldn't give a sense these files because all the entries were similar to Hex IDs.

  So that brings us to today.  The system starts with black screen with a mouse pointer.  System knows I have 2 monitors connected & I can move the mouse between the two monitors.  With the help of other boots (via F8 in the boot menu) produced similar results, except in safe mode boots, the system does not know the 2nd monitor.  CTRL-ALT-DEL does nothing.  (Do NOT bring up the Task Manager.)  The SHIFT key to display the Sticky Keys dialog box.  After a while, the screen saver turns on.  With screensaver KB/mouse activity outputs and system back to black screen.

  All the security startup black screen Modes.
  Low-resolution video starts with black screen.
  Black screen on startup of the diagnostic Mode.
  Directory Services Restore Mode reports all my disks are clean and black screen on startup.
  Sleep key works.  Wake up, the system returns to black screen.

  OK, here's a little recap... BLACK SCREEN!

  So next I tried the repair your computer...

  Log in to my account admin OK.  Then I tried to Startup Repair which could not detect a problem.  Then I tried the system restore.  System Restore is all my restore points registered in April ' 09.  System Restore Gets an error and fails to load any restore point.  I have two different messages depending on what point of restoration, I try.

  2 most recent restore points are of yesterday and today and the updates, I just installed but never rebooted before the power failure disk check.  When I try these 2 restore points, I get the following:

  The configuration register is corrupted. (0x800703F1)

  If I try the old restore points, I get:

  Cannot open the file transactionally, because its identity is function
  on the outcome of a transaction not resolved.  (0x80071AA7)

  Reading through the error of this last web messages makes me think to there is a bad dependency in the update / restore of the system process.  If pending updates become corrupt, old restore points will fail.  Is this true?
   
  I can boot from a CD-ROM of 3rd party and see my programs and data on the disk.  I did a full inspection, but it seems that all of my stuff is still there.

  So finally I tried to reinstall my Vista system, and my only option is to replace my entire system.  The update option is grayed out.  I used to be able to do a re-install/upgrade to update in the old days (XT & before), but it seems that it's not possible with Vista.  It would be great if I had my old system before SP1, and then I could re - install SP1 & all of my updates.  But it would be impossible for me to recreate my 1 TB from scratch system.  Simply, I have enough DVDS to back up a lot of data.

  Is there a solution to my boot at the digital black problem, or I'm really screwed?  A reasonable solution is much appreciated.

  ==============

  UPDATE...

  I can access shared folders on the blackened on Vista machine.  I created my user account on another computer (Win XP) and am also able to access all my user files.  In addition to the screen saver and the sticky keys work, it seems that file sharing works also.  However, the printer share and office remotely (using Ultra VNC) do not work.

  Hey Ken, I just reread your post previous and tried your procedure.  Are your steps to perform a repair install on Windows site:

  1. Insert the Windows installation disc in your computer's DVD or CD drive. You must start Windows installation while running your existing version of Windows.

  2. on the Install Windows page, click install now .

  3. on the get updates for installation page, we recommend getting the latest updates to help ensure a successful installation and to help protect your computer against security threats. You will need an Internet connection to get the installation updates.

  4. on the Type your product key for activation , we strongly recommend that you type your 25-character product key in order to avoid problems during activation.

  5. on the page Please read the terms of the license , if you accept the license terms, click I accept the terms of the license .

  6. to the which type of installation you want? page, click upgrade to begin the upgrade. You can see a compatibility report.

  7 follow the instructions.

  Note : If your installation disc doesn't include SP1 , and you are updated, then you must uninstall it before proceeding with an update install. Start-> Control Panel-> programs-> see installed updates , then select Service Pack for Microsoft Windows and click on Uninstall.

  Unfortunately, I'm stuck on the first step.  Start a Windows installation when executing my existing version of Windows when my existing version of Windows starts with a black screen, and the only interaction of console, I am able to do what a screen saver and the Sticky Keys dialog box?  What is the trick to start installation?  I can't find.  Is there a way to launch the installation with the keys dialog box to sticky?

  In addition, in the case where I, how to uninstall SP1 from a black screen?  The dialog box of the sticky keys which they as well?

  I know that other messages that other users could not bring up the Task Manager with CTRL-ALT-DELETE.  As I said in my original post, I can't do it.  THE ONLY THING THAT WORKS FOR ME IS THE STICKY KEYS DIALOG BOX.  So I do not buy any version of Vista at all costs will have what I need because Windows Vista just can't do a re - installed on-site if your Windows Vista is not running after a black screen.  Right?

  I'm getting very frustrated and would be very grateful for any help.  I just can't figure how to get the computer do anything when the only thing it starts is a black screen.  And none of my restore points can be restored.  I thought that the system restore has been the goal of the restoration of the system.  Why my Vista system locks my system restore? I don't understand!

  I think that this last update not to not fill properly and locked up my system.  Is it possible for me to undo than a black screen or a Setup disk?

  BTW, Western Digital diagnostics transmitted without error.  Then at the command prompt on my Vista disk, I ran chkdsk and it fixed some files.  I think they were just left by a system restore failed.  So I ran sfc from the command prompt using sfc/scannow damaged = c: \ /offwindir = c:\windows.  He ran for a while and there was no violation of integrity.  If the drive seems fine.  Are there tools that can help me find the problem?  Is that what I can do to restore the registry to an earlier time manually?

• File Windows 7 recovery error 0 x 80070131 - restore fails on filenames without extension

  I'm trying to restore files backed up from another computer (also using WIndows 8) using Windows 7 file recovery. During the restore process, I get the following errors for a subset of files:

  Restore failed restore the file: \\?\C:\Users\Public\Documents\C\Users\julius\AppData\Roaming\.minecraft. Names of the error: short are not enabled on this volume. (0 x 80070131)
  Restore failed restore the file: \\?\C:\Users\Public\Documents\C\Users\julius\AppData\Roaming\.minecraft\resources. Names of the error: short are not enabled on this volume. (0 x 80070131)
  Restore failed restore the file: \\?\C:\Users\Public\Documents\C\Users\julius\AppData\Roaming\.minecraft\resources\newsound\mob\irongolem. Names of the error: short are not enabled on this volume. (0 x 80070131)
  Restore failed restore the file: \\?\C:\Users\Public\Documents\C\Users\julius\AppData\Roaming\.minecraft\resources\newsound\mob\magmacube. Names of the error: short are not enabled on this volume. (0 x 80070131)

  ...

  Note: the names of original files do not contain an extension - just consist of a file name.

  How to restore files without extension also successfully?

  Kind regards, Andreas

  I found this on a forum HP-do not know why the person of Microsoft is to not be suggested (perhaps one of you admins can come up with reasons why it is a bad idea)

  Launch the command line and enter the following command to enable/disable the registry value to enable long name creation:
  behavior fsutil set disable8dot3 0
  
  
  That worked for me and allowed me to pull from a backup I did a disc in my laptop to a disk in my desktop-computer laptop running Win7Pro, office runs Win8.
  This is a directory of work files that I needed to use my laptop for repair while.

• Panic the kernel with MCO HDA REGISTRY RESTORE failed

  Hello

  My macbook constantly restarts and does a KERNEL PANIC when the graphics edge R9 IRIS Pro Tips.

  Is this a hardware problem?

  Thank you very much for your answers.

  Panic report *.

  panic (cpu 4 0xffffff7f89d985ba appellant): "MCO HDA REGISTRY RESTORE FAILED: rdar://7254528, had BAR0 invalid"@/Library/Caches/com.apple.xbs/Sources/AppleGraphicsControl/AppleGraphi csControl-3.12.6/src/AppleMuxControl/kext/AGCPowerManagement.cpp:1196.

  Backtrace (4 CPU), Frame: Return address

  Take it for a health check. Bring a copy of the panic report in its entirety.

• restore failed - cannot find image path path:c:\images_tmp_dir\install.wim HELP my old crushed drive

  my old drive crashed bought a new and the 5 CD to recover at acer until I installed the cd, that I could get in the bios. Now nothing and I still get the evertime following error, he manages at the end of the installation of recovery disk 3

  restore failed - cannot find path:c:\images_tmp_dir\install.wim image path

  I used Rufus and yes I changed my BIOS, but I had read I need to change the format of my flash to fat64 which I just did, now I'm a new attempt to restore the ISO.  I'll let you know if it works.

• Restore failed - error code = 0 x 241

  I'm trying to fix Acer Aspire 5552-7803 friend and ended up having to order a set of recovery disc for $20. The problem is that when I try to launch the restore of the default factory, he charges through the first two recovery disks, then on the third, I get an error message that says "restore failed - error code = 0 x 241 (WIMApplyImage impossible to apply the image: Windows cannot verify the digital signature for this file.). A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or that could be... "The rest is obscured by the box and you can't scroll to read.

  I've read several posts that say they had the same problem, but have yet to find a real solution. I completely cleaned the disk and did a 'Clean' on diskpart with a Win7 repair disc. It is possible that the disc is damaged, but with the accounts that I have seen, I would not buy a new drive and then find out that the drive wasn't really the problem.

  I could really use some suggestions. Help, please.

  Thank you

  I think I finally found the problem. I tried to install an evaluation version of Windows 8 and got a slightly different, but the similar error message and google it. The first instance of the problem that I found was a solution, saying that the guy has discovered that he had a bad memory stick. I removed one and retried the recovery disks and it always failed. I swapped the memory stick and tried again, and now I'm almost finished with the full reload. I think that was the problem and I'm hopeful that we're back in business... Now to make shopping for memory.

• Desktop appears again without any data. System restore fails to «incomplete system restore»

  Original title: System Restore failed

  My computer turns off on its own yesterday. After the reboot, my office was back to default settings. Everything that I had stored on the desktop disappeared and I also lost all my favorite places. I tried restoring the system using different dates but it said system restore incomplete. I've lost everything?

  Hi mike,.

  ·         Have you received any messages when the computer starts very well?

  ·         Your data is also missing?

  ·         Do you have any other user accounts on the system?

  Step 1: Try to start in last good known Configuration and see if you can start very well.

  How to start your computer by using last good known Windows XP Configuration

  Step 2: Start the computer in safe mode and check the number. Report of the results.

  See also:

  Abnormal termination can affect the system restore

• The system restore failed. Error message (unspecified error occurred during restore).

  The system restore failed.  Error message (unspecified error occurred during restore).  I am running Windows Vista Home Premium.  I uninstalled Mcafee Security Suite and System Mechanic 9 which are the security only packages I have.  After uninstalling the above, I tried several points with restore the with the same results.  Any ideas?

  Nortonn, McAfee etc often stops system restore:

  http://service.McAfee.com/FAQDocument.aspx?ID=TS100507

  Run more high tool ot remove all McAfee.

  1. try SR in safe mode:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  2 Malware will stop at the system restore:

  If necessary, do all the work Safe Mode with network.

   

  To get into Safe Mode with network, press F8 at the Power On / boot and use key arrow upward to get into SafeMode with networking from the list of options, and then press ENTER.

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight.

  See you soon.

  Mick Murphy - Microsoft partner

• System restore failed, registry damaged, signature of the problem 07: O, s is not installed

  It, s a Dell Vista. (Initially WINDOWS 7). Does not start. Comes with Startup Repair tool.

  System restore failed, damaged, registry problem Signature 07: No O, s installed.

  Choice 1 or q: beep.

  Check memory problems: no problem dedected, goes back to the Startup Repair

  Help

  Hello

  1 have had any changes made on the computer before the show?

  2. What is the full and exact error message?

  3. How have you tried to do a system restore?

  Method 1:

  I suggest you to refer to the article and see if it helps:

  Windows Vista or Windows 7 unbootable, and the Startup Repair tool does not resolve the problem

  http://support.Microsoft.com/kb/934540

  Method 2:

  Check the link and see if it helps:

  Pick up the pieces after a computer crash

  http://Windows.Microsoft.com/en-us/Windows-Vista/picking-up-the-pieces-after-a-computer-crash

  Let us know if it helps.

• "Restore failed, error Code 1117

  I'm doing a system restore on a gateway nv 79 with the backup disc, I did when the computer was purchased.  I get all the way up to 86 percent brand and get "restore failed, error Code 1117, not able to perform due to an i/o error."  I can get nowhere excpet the F2 screen, so I don't know what the problem

  Hello

  ·        You did changes to the computer before the show?

  ·        You are able to boot to the desktop in normal mode?

  Method 1: If you are not able to boot to the desktop in normal mode then I suggest to start in safe mode with command prompt and run the disk check to the following address:

  CHKDSK X: /R

  Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.

  Reference: Startup options (including safe mode) advanced

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Method 2: follow the instructions from the link to fix the problem:

  Error message when you try to perform a full backup on a Windows Vista-based computer: "the application cannot be performed because of an i/o device error."

  http://support.Microsoft.com/kb/952272

  Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.

• I'm trying to recover and restore my computer, but each time he finished he said restored failed.

  It allows to restore properly.
  but I noticed 2 days that my computer has been idle.
  And wouldn't let Me log into my Sites.
  so today, I tried to recover.
  and iv tried 4 times.
  on different dates.
  It keeps saying restored fail.

  Hello

  system recovery and system restore are 2 completely different things

  recovery system puts it back to how it was purchased; relocation of

  System Restore is placing it in time to a date of particulare parameters

  You can be infected with the Malware

  malicious software stops the system restore

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• I get error code 0 x 80070005 that reads "system restore failed during the restoration of the registry since the restore point.

  Original title: Windows 7 system restore always fail.

  I get error code 0 x 80070005 that reads "system restore failed during the restoration of the registry since the restore point.  I don't have Norton AntiVirus.

  If anyone can help solve me this problem I would be very grateful.

  Thank you for your response.  I forgot to mention in my first post, I tried both methods without success.  However, I finally understand how to solve the problem that led me to want to do a restore of the system in the first place. for now, I am therefore able to avoid a system restore.

  Thanks again.

• The database recovery/restore failed with unexpected error 509

  Hello

  The database recovery/restore failed with unexpected error 509

  In the Event Viewer, I had this error SEVERAL times every second.  He goes absolutely crazy.

  I don't know what to do with it.

  I'm with Windows 8 Pro running on a very stable computer with 8gig of ram, plenty of hard drive space.  Each single drivers updated Windows Update.  Everything is really clean except this error in Event Viewer

  Svchost SRUJet (1624): database recovery/restore failed with unexpected-509 error.

  Task category: registration/recovery

  Esentutl /p /r tried / everything but nothing wrong was found with those

  Thanks for any help.

  Exactly the same problem, nothing Microsoft recommended was the cause, scannow and DISM commands are returned without error.

  So I went to the event viewer and scrolled down to find, when these errors began to occur. So I found a few entries initially saying things like: an attempt to move the file 'C:\Users\xxxxx\AppData\Local\TileDataLayer\Database\EDB.log' to 'C:\Users\xxxxxxxx\AppData\Local\TileDataLayer\Database\EDB00008.log' failed indicating system 183 (0x000000b7) error: "cannot create a file when that file already exists.

  Then, I went to C:\Users\xxxxx\AppData\Local\TileDataLayer\Database\ and removed the files listed (e.g., EDB00008.log).

  Bingo, the errors will stop immediately.

• can't understand why an extract of the database restore fails (missing archive logs)

  Dear,

  I'm completely back up my database ensures every night with following statement.

  full backup AS BACKUPSET COMPRESSED ORCL_FULL_STBY format database tag ' / oradata/archive/fast_recovery_area/%d_%T_%s_%p_FULL_STBY' more tag ORCL_FULL_STBY archivelog delete all entries;

  I wanted to check with 'restore... Preview' if my backup is good enough to restore the database from scratch.
  result = failed!
  Reason:
  "any backup log archived for thread 1 with sequence 65 and YVERT departure from 49020676 found to restore."

  I have read the documentation oracle and articles for days, but I did not understand that even though I take online backup yesterday if I want to restore my database today I still need archival newspapers last month?

  can you please review my analysis and tell me where I am doing wrong?

  for example a piece from my last backup;

  Time of accomplishment BS key Type LV size device Type elapsed time
  ------- ---- -- ---------- ----------- ------------ ---------------
  1008 full 199.25 M DISK 00:04:44 October 8, 15
  BP key: 1010 situation: AVAILABLE Tablet: YES Tag: ORCL_FULL_STBY
  Item name: / oradata/archive/fast_recovery_area/QIPDB1_20151008_1057_1_FULL_STBY
  List of defined backup data files 1008
  Name of file LV Type cash SNA cash time
  ---- -- ---- ---------- --------- ----
  50570723 full 1 8 October 15 /oradata/data/qipdb1/system01.dbf
  4 integer 50570723 8 October 15 /oradata/data/qipdb1/users01.dbf

  as you can see "Cash SNA" is 50570723 so tells me that my understanding if restore these backups I need archived newspapers on top of the YVERT.
  for me the best candidate is

  Time of accomplishment time BS key size Device Type
  ------- ---------- ----------- ------------ ---------------
  65,25 M 1004 00:01 DRIVE: 24 OCTOBER 8, 15
  BP key: 1006 situation: AVAILABLE Tablet: YES Tag: ORCL_FULL_STBY
  Part name: /oradata/archive/fast_recovery_area/QIPDB1_STBY/backupset/2015_10_08/o1_mf_annnn_ORCL_FULL_STBY_c1dkfw9k_.bkp

  List of newspapers archived in backup set 1004
  The next time that THRD Seq YVERT low low time next YVERT
  ---- ------- ---------- --------- ---------- ---------
  1 79 50310555 7 OCTOBER 15 50570723 8 OCTOBER 15
  
  BUT out of "restore...". Preview' RMAN stil tells me that

  any backup log archived for thread 1 with sequence 65 and YVERT departure from 49020676 found to restore
  any backup log archived for thread 1 with sequence 66 and YVERT departure from 49020693 found to restore
  any backup log archived for thread 1 with sequence 67 and YVERT departure from 49020696 found to restore
  any backup log archived for thread 1 with sequence 68 and YVERT departure from 49020761 found to restore
  any backup log archived for thread 1 with sequence 69 and YVERT departure from 49020836 found to restore
  any backup log archived for thread 1 with sequence 70 and YVERT departure from 49020919 found to restore
  any backup log archived for thread 1 with sequence 71 and YVERT departure from 49021021 found to restore
  any backup log archived for thread 1 with sequence 72 and YVERT departure from 49155291 found to restore
  any backup log archived for thread 1 with sequence 73 and YVERT departure from 49324912 found to restore
  any backup log archived for thread 1 with sequence 74 and YVERT departure from 49498102 found to restore

  When I look at V$ ARCHIVED_LOG I see seems indeed to these archived logs removed for cause of "more tag ORCL_FULL_STBY archivelog delete all entries ' that they have been deleetd after saving.
  and because of my retention policy and script; I remove the logs also archived backups that are more than 2 days.

  S SEQUENCE # FIRST_CHANGE # NEXT_CHANGE #.
  - ---------- ------------- ------------
  65 49020676 49020693 D
  A 49020693 OF 49020676 65
  D 68 49020761 49020836
  66 49020693 49020696 D
  67 49020696 49020761 D
  69 49020836 49020919 D
  70 49020919 49021021 D
  49155291 49021021 71 D
  72 49155291 49324912 D
  D 73 49324912 49498102
  74 49498102 49632131 D

  I still don't understand why rman complains of the archived logs that are for an older sequence (SNA) as my last backup
  because I was assuming that the concerned newspapers archived should have already applied to these files of data, right?

  My final goal is to deliver below for the case that we have lost everything.

  Run {}
  restore the database;
  recover the database;
  }

  Thanks in advance,
  Halit

  Hi guys,.

  I found the root cause and workaround

  RMAN-06025 - RMAN RESTORE DATABASE OVERVIEW to the backup site asks former newspaper (Doc ID 1599013.1)

  CAUSE Checkpoint_change# standby controlfile not refreshed properly.  BUG 15876029 - RESTORE PREVIEW ASKING OLD ARCHIVE LOG IN STANDBY DATABASE  Closed as DUPLICATE of  BUG 8740124 - CURRENT STANDBY REDO LOG GROUP SHOULD BE INCLUDED IN THE DATABASE BACKUP BY RMAN SOLUTION  1) Workaround is to recreate the standby controlfile.  OR  2) upgrade to 11.2.0.4 or above where Bug 8740124  is fixed  OR  3) check for availability of patch 8740124