Restore the database on new server

Similar Questions

• Move the database on new server

  I've hava on Solaris 10.5 10.2.0.1.0 Oracle and wants to move to Oracle 11.1.0.1.7 on the same platform, but another server using exp/IMP.
  
  I'm not aware of any other precondiction that I need to meet previously on this exp/emp. If there is a prerequisite, I'd appreciate if you can share it.
  
  The database must stop
  I have to copy all the files from the old database
  
  Here is my file by:
  

  UserID = system / *.
  file = /h/share/database/db/backups/CBEXP.dmp
  Journal = /h/share/database/db/backups/CBEXP.log
  Statistics = none
  Full = y

  Albert Zaza wrote:

  The new database (11.1.0.0.7) will take the same format as old (10.2.1) and thus exp and experienced will do the job.

  No, in fact old exp/imp in 11g is not supported.

  So I have to create a 10.2.0 of databases, import the dump files. When all is done, I can only upgrade to 11g

  I do not understand you now, you actually have the database in 10.2.0 so take logical backup using expdp and create the new database 11 g then import it.

• How to restore the configuration in new FireSIGHT (device RMA)?

  How to restore the configuration in new FireSIGHT (device RMA)?

  FireSIGHT need new license again or not?

  Licenses are issues associated with the license key of the management FireSIGHT pole. The key is a combination of the type platform (model) and the MAC address of the server.

  So, Yes, you will need more reissued. The case of the TAC which obtained you the RMA can serve as the basis for a request to the team of licensing for the reissue.

• Restore the database to the fallback location

  Hi all

  9i

  RHEL5

  I'm doing to restore the database to the startup location.

  Copy the components of backup on the remote server (same directory).

  RMAN target / auxiliary sys/change_on_install@STANDBY

  
  

  Release of Recovery Manager: 9.0.1.1.0 - 64 bit Production

  (c) Copyright 2001 Oracle Corporation. All rights reserved.

  connected to target database: PROD (DBID = 3261937922)

  connected to the auxiliary database: PROD (not mounted)

  Run this command on the side of PROD or side Server backup server?

  He also mentioned @STANDBY, but it has not mentioned in the steps of the process to add the name of WATCH service in TNSNAMES.ora?

  Thank you very much

  JC

  Hello Jenna_c

  I suppose that you created a controlfile to standby to primary (SQL > alter database create standby controlfile as ' / tmp/stby.ctl '; in primary, then copy it to sleep)

  and you have been used for the standby instance nomount (with the settings standby.ora... file) and restore it from the last backup, if you have a backup tape of stb you can restore backup site, if you have a backup to disk, it must be accessible on the same path to the backup site. (NO RECOVERY)...

  Then you have an instance of State nomount standby:

  SQL > alter database base_de_donnees eve of Mount;

  Here, you can create the redologs Eve... it is not mandatory...

  SQL > alter database add standby logfile group 11 ('/ u01/apps/oracle/oradata/STANDBY_redo_11a.dbf',)

  u02/apps/Oracle/oradata/STANDBY_redo_11b.dbf') size 100 M;

  SQL > alter database add standby logfile Group 12 ('/ u01/apps/oracle/oradata/STANDBY_redo_12a.dbf',)

  u02/apps/Oracle/oradata/STANDBY_redo_12b.dbf') size 100 M;

  SQL > alter database add standby logfile Group 13 ('/ u01/apps/oracle/oradata/STANDBY_redo_13a.dbf',)

  u02/apps/Oracle/oradata/STANDBY_redo_13b.dbf') size 100 M;

  SQL > alter system set standby_file_management = auto; (throwing in the primary and standby)

  then, we put an instance ensures in recovery mode:

  SQL > change database recovery managed standby database disconnect from the session.

  in the primary, we check status of dest archive remotely.

  Select * from v$ archive_dest_status;

  sleep mode check us status of recovery:

  SQL > select process, status from v$ managed_standby;

  Kind regards.

• Restore the database to 10.2.0.1 (should I restore old saved oraInventory)?

  Hello everyone;

  Hello!  Hello all;

  If the upgrade process fails, should I restore old oraInventory directory?

  Already I have saved $ORACLE_HOME, oraInventory and consistent copy of the data files, controlfiles and redo log files.

  
  

  I restored $ORACLE_HOME and consistent copy of the data files, controlfiles and redo log files.

  Once again, should I restore (old oraInventory saved) directory?

  
  

  Thanks in advance...
  

  
  

  
  

  There are two parts to your upgrade-

  1. install the 10.2.0.4 patch on top of the binary 10.2.0.1 - you must save $ORACLE_HOME and oraInventory directories before applying the patch - if the binary upgrade fails for any reason, you can restore the ORACLE_HOME and oraInventory to backups and re-apply the binary 10.2.0.4.

  2 If the above step is successful, then you must update the database using DBUA. Yet once, before you begin the upgrade, you back up the database. If there are problems during this part, you simply restore the database from backup and re-run the upgrade.

  You can certainly use two separate houses if you wish. In this case, the first step would be to clone the 10.2.0.1 existing HOUSES a new 10.2.0.1 see HOME - cloning an Oracle Home

  Once completed the clone, and then use the two steps above on the newly created HOUSE

  HTH
  Srini

• I use TDE tablespace encriptación and backup is performed (no encriptación rman). I get the error message when you try to restore the database

  I use TDE tablespace encriptación and backup is performed (no encriptación rman). I deleted the database and try to restore the backup. I get the error when you try to restore the database with rman restore database.

  ORA-19870: error when restoring backup piece + FRA_DG, oratst, backupset, 2015_03_2

  ORA-19913: could not decrypt the backup

  ORA-28365: portfolio is not open

  About what I know, you should be able to RESTORE the data, but no RECOVERY without portfolio being opened.

  Check the value of the variable environment - ORACLE_UNQNAME

  It has everything first a correct value and try to open the wallet.

  HTH,

  Pradeep

• Restore the database to the previous SNA

  Thank you for taking my qustions?
  
  
  I have a situation where I'm going to string together several jobs very long. If something goes wrong I want to restore the database to a specific number of SNA. I do not have the return of flame cutting, because I want things to run as fast as possible.
  
  If I should have to restore the database because a job fails, do I restore the database from a backup?
  
  Could I just restore the backup control file and then run rman > recover database until the SNA = 122222222; If Yes, how Rman knows what archivelogs to restore and what happens if SNA has not been archived yet?
  
  Thank you
  Kathie
  
  11.1.0.7 windows 2008.

  Hi koko.

  You must restore the full database back and go for an incomplete recovery using backup controlfile.
  Because it is not possible to restore the data files SNA number.

  Anil

• How to restore the database only with redolog, ctl and dbf files

  Hi friends,

  I had an oracle 11g database, but the server is down. So I just save only the DBF, CTL and REDOLOG files. But I couldn't save the file spfile and pwd.

  How to restore this database in the other server? How can I recreate the spfile?

  I hope someone can give me a hand.

  Thank you.

  Hello

  Thanks for all your advice.

  I try to recreate an environment equal to the original.

  I have install windows server 2003 and install the database from oracle 10.1 all default options.

  I create the directory D:\oracle\product\10.1.0\oradata\. Then I put the files (*.) CTL *. DBF, *. Log) in this directory.

  After this, I create a pfile file in: D:\oracle\product\10.1.0\db_1\database\init.ora with only the db_name and the control_file, the compatibility settings.

  Then open a CMD and create a service, set the ORACLE_SID and try to start the database:

  oradim-new - sid

  Set ORACLE_SID =

  sqlplus / as sysdba

  startup nomount pfile='D:\oracle\product\10.1.0\db_1\database\init.ora';

  change the editing of the database;

  ALTER database open;

  And, the open database

  After I install Oracle Sql Developer, and I can connect to instance and check the tables.

  But when I try to do an export of CMD, I get tracking errors:

  Export: Release 10.1.0.2.0 - Production on Jue 30 Abr 10:04:24 2015

  Copyright (c) 1982, 2004, Oracle.  All rights reserved.

  Contrase±a:

  Conectado has: Oracle Database 10 g Enterprise Edition Release 10.1.0.2.0 - product

  ion

  With partitioning, OLAP and Data Mining options

  Exportaci¾n made in el juego WE8MSWIN1252 character y el juego CARAC

  Teres AL16UTF16 NCHAR

  Exportando toda database...

  . exportando tablespace definiciones

  . exportando people

  . exportando usuario definiciones

  . exportando roles

  . exportando recursos costos

  . exportando rollback segmentos definiciones

  . exportando enlaces a the database

  . exportando sequence n·meros

  . exportando directorios alias

  . exportando espacios of numbers in context

  . exportando numbers of Ajas functions bibliotecas

  . exportando tipo p·blico sin¾nimos

  . exportando privado tipo sin¾nimos

  . exportando definiciones objetos types

  . exportando actions y objetos del sistema procedure

  . exportando actions y objetos procedure pre-sequence

  . exportando agrupamiento definiciones

  EXP-00056: is ha UN error 24324 ORACLE sown

  ORA-24324: Service Manager no inicializado

  EXP-00056: is ha UN error 24324 ORACLE sown

  ORA-24324: Service Manager no inicializado

  EXP-00056: is ha UN error 24324 ORACLE sown

  ORA-24324: Service Manager no inicializado

  EXP-00000: the exportaci¾n no ha terminado correctamente

  Someone knows this problem?

  Best regards.

• Restore the database on the two houses of Oracle

  Hi all

  Oracle 9iR2

  OEL 5

  I have our database of PROD rman backup, the SID is also named PROD.

  I want to restore it to a different server, but I want two database restored the same SID on the same server.

  For example, I create OracleHome1/u01/app/oracle and OracleHome2 another/u02/app/Oracle.

  Then I'll bring backup rman for each House, create two identical databases. Is this possible?

  Thank you very much

  JC

  No, 32-bit guest OS cannot use hardware virtualization assisted using a type 2 hypervisor. VirtualBox is an application and type 2 hypervisor. What you need is the Oracle VM x 86 Server, which is a type 1 hypervisor where you can run a 32-bit guest with the support of paravirtualized system.

  The following will give you a good overview: paravirtualization (PV) - Xen

• Restore the database only have files DBF and CTL [Windows] [11.2.0]

  Hi all

  Got a little a situation here. A development database (11.2.0).) on a Server Windows 2008 sank yesterday.

  Something went horribly wrong with the hardware, so we can't start the machine.

  I removed the hard drive and attached it to another windows machine. I got lucky and can get all the files on the disk.

  Is there a way I can recover this database? I read some where people say you can just re - create a new database and then replace the DBF files.

  Judge that worked pretty good, control files were attached. But when I tried to connect with any user, I got this beauty of an error:

  ORA-12432: LBAC error: zllessesinit:OCIStmtExecute (Yes it's English :-)).

  Anyone have some advice on this? Should not be a solution for the above error. I just want to get current DB running on a virtual computer so that I can expdp data out of it.

  You might have figured out, the original database has not been closed correctly, since the entire machine just crashed. If I can't get back it, this isn't a problem.

  I'm quite new to the Oracle DBA part, so sorry if this is a silly question.

  So unclear and more information needed, pull! ;-)

  I found the solution to my problem:

  It is possible to simply re-create the database, stop it and and replace the DBF files in the new instance.

  However, I didn't know that the old database is a 32-bit version. The news is a 64-bit.

  I re installed a 32-bit host on the new machine, and that did the trick.

  Hope this helps other people with the same problem.

• Migrating the database from one server to another..., what are the impacts?

  Hello
  
  We currently have our Hyperion (workspace, planning, essbase) environment on a single windows server. The associated database (Oracle) with it is on another Windows Server.
  
  The platform will be shared, and for this, the database will be migrated on the server of hyperion. During the process, its name will be changed (but the users/schemas/password will remain)
  
  How to make the platform Hyperion welcomes such a change? The server name can be changed somehow in the configuration? Or do we reinstall us from scratch, the application?
  
  Thanks in advance for your help. Best regards.

  There is no need to re install, you will have to reconfigure all products with the new name of the host of the database by running the configuration utility, when you are prompted to use select existing table.
  Once Setup is complete for planning, you must change the information in the database for each application by modifying the database,

  Version number will be a real help here.

  See you soon... !!

• Need to change the database to another server

  Hello
  
  We purchased a new server and want to move our database to the new. I intend to do following things:
  
  (1) stop the database and backup to take.
  
  (2) create a new database on the new server with the same structure of directory and same name.
  
  (3) copy all the files to the new server (file initorcl.ora, password, data files, control files).
  
  (4) give old IP of the server to the new server.
  
  (5) make the necessary changes to Tnsnames.ora, listener.ora.
  
  (6) start the database.
  
  
  Please advice if I am out of the important steps.
  
  Thank you

  Step 2 is not necessary and can be confusing because it creates data files that you don't want! (you want the data files to from the "old" Server).
  However, if the platform is Windows, you will need to create the Windows Service to start the database instance.

  Hemant K Collette

• HOW to RESTORE THE SETTINGS FOR NEW emails I WRITE, SO ONCE MORE, THEY INCLUDE a TAB of E-MAIL SENDING & a CONTACTS TAB, WHO LISTED ALL MY ADDRESSES of E-MAIL STORED?

  When I open a new empty email, NO send an e-mail or the Send option is visible; There is a Contacts tab, where I can access ALL the addresses to which email regularly. How to restore these tabs in all new empty emails that I opened?

  I just learned how to send something by pressing Enter control AND at the same time. but it helps me NOT at all; I want to restore the old settings. I know that the problem started in my last email, after I had clicked and uncontrolled of different elements, in order to enlarge the writing to the email. Now, unfortunately, all emails are no longer necessary tabs to SEND the MAIL and CONTACTS. I appreciate your wisdom in this case...

  Open a window of writing.
  Press the alt key to make the call of menu bar.
  The menu bar, select View-Toolbars and relight the toolbars.
  The Send button is the Composition toolbar.

  Press F9 to turn it back on the Contact Sidebar.
  You can also activate the box contact power under page layout display on and off.

• VMware Clod Migration boot cd for the database Migration SQL Server

  Hi techies,.

  I have a requirement to migrate one of our physical DB server to the virtual machine, it is very important to business so I thought to go with cold cloning with boot cd, but I could not get this cd bootable anywhere... ! can someone help me on this? and also please suggest me there at - it another way, I can do this task successfully with some fails?

  VMware Converter 5.x has the ability work synchronize to power use this run a p2v migration

  (1) perform a P2v full and when its done and you're ready to cut more

  (2) stop the database service and do a synchronizaion and put the virtual machine online

• move the apps on new server level

  
  Hi all

  Here we have 2 node Installation

  node 1: apps + db (db + cm)

  node 2: applications (web + forms)

  requirement is that we want to move the node 2 to new server os team wants to do an interview on node 2.

  is it possible to move only the node 2 (web + forms) again thanks to n sync server clone faster with existing and node cm db or we must go entire installation to new servers

  Links n MOS doc ID much appreciated

  versions:

  apps: 11.5.9

  DB: 9.2.0.8

  OS: RHEL 4

  Thank you

  Hafiz

  Yes it is possible and all you need to do is the following (you need not move node 1):

  -Install the operating system on the new server + pre - req packages and OS software

  -Preclone run on node 2

  -Termination of the application on node 2 and copy the files to the new node

  -Postclone run on the new node

  -Clean up FND_NODES and run the automatic configuration

  Oracle Applications Installation update, version 11i (11.5.10.2) (Doc ID 316806.1)

  Cloning Oracle Applications Release 11i with rapid Clone (Doc ID 230672.1)

  How to get a clean auto-configuration environment? (Doc ID 391406.1)

  Thank you

  Hussein