Similar Questions

• my calendar is stuck on "mobile timetables for the server account" after mountain lion update

  my calendar is stuck on "mobile timetables for the server account" after mountain lion update

  HOPE TO HEAR SOME ADVICE PLEASE :)

  1) go in your user library folder (~ / library). Hold down the option/alt key while accessing the menu Finder go.

  2) go to the calendar folder

  (3) delete all files that say "cache" (replace the your desktop in the case where you want to move them at least)

  (4) always in the user library folder, go to the Preferences folder

  (5) delete the com.apple.calendar.plist (on the desktop again)

  (6) restart your computer

• By using the system restore before computer restart after updating Windows 10...

  I chose to try the upgrade of Windows 10 on my laptop primary.  Because of the long installation times, I started late in the evening then followed finishing (or almost) the update the next morning.  Until I sat down to 'start' I spoke with a friend who had just completed an installation of two heavy day of problems.    Although I am good enough to solve computer OS and software installation problems, I was very reluctant to go forward.   After serious soul searching I elected continue to use Windows 7, I don't really like.

  That's why I chose to use the system restore before restarting my computer needed complete Windows Update 10.  I chose the previous restore point before the update of windows 10 and ran through the entire procedure and then restarted the computer after the restore point.

  Everything worked fine and I was able to do the foregoing... Except that I can't do updates of security that have been uninstalled.   The Windows Update screen repeat "you must restart your computer...". "with the reboot by holding the active button.

  This window doesn't go away even after reboot, and I can not "check for Updates".

  Does anyone have any suggestions on how to reset this program if I can do all the updates except Windows 10 security.

  Thank you for any assistance.

  By using the system restore before computer restart after updating Windows 10...

  Sorry, System Restore does not cancel the major updates, that's why a lot of automatic updates delete all system restore points. The tool that is appropriate in this case would be a restore Image. If you have not created an image before the upgrade, then you are out of luck.

• Hi, is it possible to restore the synchronization data after accidentally putting sync key? I still have an old key synchronization. Thank you

  Hi, is it possible to restore the data synchronized after accidentally putting synchronization key a day ago? I still have an old key synchronization. Thank you

  Sorry, when the sync key is reset data synchronization on the server are deleted.

  Your data must remain on other devices that use Sync before you reset your sync key, that data is not disabled when the sync key is reset.

  Now, if you had only a device running on this account synchronization and you reformatted this device, you have made a fatal mistake by resetting the sync key; There is no way to recover this type or user error. Sync was not designed as a media set in itself, there is no backup of data synchronization server or a way to restore a mistake as the synchronization key reset.

• I can record is more than all of the new bookmarks after update to Firefox 40.0.2. I have over 1000 bookmarks and also use xMarks.

  I can record is more than all of the new bookmarks after update to Firefox 40.0.2.
  I have over 1000 bookmarks and also use xMarks.
  I tried to remove 5 bookmarks and save a new bookmark, but it does not work.
  When I click on the bookmark star, stars in the bookmarks folder jumps, but does not record, it does not offer the possibility of filing in the subfolder right it me and the star is not awarded (there should be one filled with stars when the Web site is updated bookmark)

  Thank you for your help. I tried the maintenance of places without success. I have disabled xMarks, but it made no difference, I couldn't save all new bookmarks. I went on the site help above and deleted the "places.sqlite" file and recreates a new file, but it didn't work. I uninstalled Firefox full using IOBit Uninstaller and reinstalled, but I found this program does not delete the profile folder (used to have a checked during uninstall of Firefox, but it seems to have disappeared in the latest versions). The problem persisted.

  Finally, I took a screenshot of all my addons. Then, I uninstalled Firefox again, then delete the entire folder profiles (located very usefully described in the second link above https://support.mozilla.org/kb/Bookmarks+not+saved#w_fix-the-bookmarks-file )
  I reinstalled Firefox, reinstalled xMarks and connected and transferred all my favorites, I reinstalled all my previous addons and ALTO - it now everything works perfectly!

  Thank you for your help

• How to stop Firefox 18 to restore the previous Session after a Crash

  Firefox 18.0.1 running on Windows 7

  When Firefox crashes, the next time it opens it tries to restore the previous session. I don't want Firefox to restore the previous session after a crash. How can I stop Firefox restore the previous session after an accident?

  Please note:
  1 - my homepage is set to 'white page '.
  2. I configured Firefox does NOT remember my browsing history, download history, form fields, and passwords.
  3 - even in Safe Mode (with all disabled add-ons), Firefox ALWAYS restores the previous session after a crash.

  Thanks a lot for your help. I hope that my vote immerses you in the category "TOP 9".

• Restore the options popup after selecting "Non-action" and choose to use this option, whenever a device is plugged in USB?

  Restore the options popup after selecting "Non-action" and choose to use this option, whenever a device is plugged in USB?

  Hello

  Did you follow the "AutoPlay Repair Wizard"?

  You can follow the link provided in the previous post. Later, check to see if the problem persists.

  Hope the helps of information.

• Cannot open a pdf file from the website of immigration canada. Gets a message - you need a later version of the same player after update still not working

  Cannot open a pdf file from the website of immigration canada. Gets a message - you need a later version of the same player after update still not working

  10 Windows Internet Explorer with the Acrobat Reader plugin is available.

• Lose the FTP connection after you put the computer to sleep

  I usually work in Dreamweaver on my Macbook. However, if I'm working on a Web site and decide to stop for a while (it's how I closed my Macbook), everytime I open my Macbook again, so lost FTP connection. Sometimes it comes back after a long period of time, and other times I can do return disconnection/reconnection airport several times. But most of the time, I just closed Dreamweaver and reopen it. If I do this, the connection works perfectly again.

  Does anyone know how to avoid to have to close and restart Dreamweaver in order to maintain the FTP connection after having put a Macbook to sleep?

  The FTP queue time is set by your web hosting provider.  I don't think DW has mechanisms in place to send empty commands to keep the connection alive, and even if it did, it would take the computer to be operational.  You shouldn't have to restart DW well in order to get a connection.  Simply by clicking on the login button in the files panel should do the trick.

• How to make the paper dirty after update links?

  Hello

  I use the code to update the link between resources by providing new URI below. The relationship between resources are updated, but the document is not become dirty.

  InterfacePtr < ICommand > updateCmd(CmdUtils::CreateCommand(kLinkResourceStateUpdateCmdBoss));)
  UpdateCmdData InterfacePtr < ILinkResourceStateUpdateCmdData > (updateCmd, UseDefaultIID());

  updateCmdData-> SetResource (REF.) GetUID());
  updateCmdData-> SetDatabase (REF.) GetDataBase());
  updateCmdData-> SetNotify (true);
  updateCmdData-> SetUpdateAction (ILinkResourceStateUpdateCmdData::kUpdateURI);
  updateCmdData-> SetURI (newURI);
  updateCmd-> SetUndoability (ICommand::kRegularUndo);
  CmdUtils::ProcessCommand (updateCmd);

  How to make the paper dirty after update resources?

  Thank you

  Use PreDirty(); before your change.

• I can't disconnect or change user account after update vista Home premium SP2

  Acer e380 with vista home premium 32 bit OS 3 G of Ram
  After the SP2 update successful that I don't then log off user accounts or to switch between user accounts

  When I choose logout of the system never disconnects, and I have to hard start
  When I chose to change username the same thing happen it never disconnects and I have to hard start

  I can access my different user accounts when restarting individually well but is not a viable solution as long as switching user accounts and logout worked just find before the SP2 update

  Applications, (Norton and McAfee) are notorious for not not upgrade (or uninstalling) itself. Chances are that the "remains" of Norton here is your troublemaker.

  Roll up your sleeves & cross your fingers...

  ACTIONS

  [You may want to print these instructions for reference offline. IMPORTANT => NO SKIP & perform all the steps in a 1 uninterrupted session!  [If a step said to restart, restart! ]

  1 right-click on the link, select SAVE TARGET as.... & download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3 uninstall Norton Security Suite [or keep constant Protection Suite if you are a Subscriber Xfinity] and LiveUpdate and start any Norton Add ons via | Control Panel | Programs: Programs and features.

  4 IMPORTANT! -Online make sure that the Windows Firewall is activated immediately after the reboot!  [Should be automatic, but I want you to check again.]

  NB: Now you're "working without a net": do not to ANYTHING else online (e.g., navigation reading E-mail; cat) until you have finished step #8 below!

  5. right click on the file that you saved in #1 above and select run as administrator to run the utility, and then reboot again.

  6. OPTION A: do a clean install of Norton Security Suite [or keep constant Protection Suite]; Follow all the instructions.

  NOTE: Do not activate or install Norton modules or toolbars (for example, Norton Anti-Phishing) immediately.

  OPTION (highly recommended) B: Install Microsoft Security Essentials (also free but MUCH more reliable & less annoying).

  -Online do NOT install applications as well !<>

  7. If you take OPTION A to #6, manually & repeatedly run LiveUpdate (Norton) until you get a "not more than updated" or similar prompt.  Otherwise, skip this step.

  8. right click on the following link and SAVE the download to your desktop: http://iefaq.info/attachments/133/ie8-rereg.zip [1]

  Note: Good for IE9 & IE7, too.

  8B. do a right-click on the file downloaded in # 8 a above (that is, ie8 - rereg.zip) and EXTRACT its contents to the desktop. This will create a new folder on your desktop named ie8-rereg.

  8. close all open applications (that is, anything with an icon on the task bar), open the new folder created in # 8 b above, double-click on the file ie8 - rereg.cmd to run the script and restart.

  9. reaffirm Internet Explorer as the browser in the default CUSTOM (<>) Set Program Access and defaults of the computerarticle. [2]

  10. right click on the following link and SAVE the download to your desktop: http://www.slipstick.com/problems/reg/chromehtml.reg [3]

  10. b double-click the file that you saved in # 10 above & accept invites him to MERGE with the registry data.

  11 restart again.

  12. open Internet Explorer (only!) to http://support.microsoft.com/kb/923737 [ignore the warnings of DO NOT APPLY and the section will APPLY to] & run the difficulty.

  Note => for best results, check the option Remove personal settings .

  13. open Internet Explorer (only!) to http://support.microsoft.com/kb/910336 [ignore the title & symptoms].

  13 b. IMPORTANT!-online make disappear/close the pop-up window that offers the Windows Update troubleshooting tool! -then...

  c. 13, without taking into account of the "not recommended" or similar warnings, run difficulty he 50202 in DEFAULT modes and AGGRESSIVE. [4]

  14 restart once more and then run a manual updates & install any/all the updates available (for example, KB2722913 or higher); Follow all the instructions.

  15. open Internet Explorer (only!) to http://java.com/en/download/installed.jsp & make sure that the test shows that Java Version 7 Update 7 [for Internet Explorer] is installed.

  16 get Adobe Flash Player v11.4.402.278 (or higher) installed NOW! Follow the instructions here-online http://aumha.net/viewtopic.php?f=26&t=46252

  17. While you're at it, make sure that Adobe Reader or Acrobat v10.1.4 is installed (assuming that one is your default PDF reader)-online http://aumha.net/viewtopic.php?f=26&t=46241

  18. in response to this post with a status report.

  Good luck!

  =========================================================
  [1] source: http://iefaq.info/index.php?action=artikel&cat=42&id=133&artlang=en

  [2] after that we ended up this thread, do not hesitate to reaffirm Chrome as a default if you wish.

  [3] trust Source: http://www.slipstick.com/problems/this-operation-has-been-cancelled-due-to-restrictions/

  [4] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

• On the screen keyboard, how to restore the original size after maximizing

  I used the Task Manager to maximize the on screen keyboard and now to restore its original size, but can find no way. XP MCE SP3.

  Thank you, but no joy there.

  Gathered the courage to dig into the registry and managed to restore the osk, so, for recording answering my own post. After some nosing around, I ended up export

  [HKEY_CURRENT_USER\Software\Microsoft\Osk]

  a user account who have an osk immaculate and imported to the account with the enlarged osk... it worked. Parameters has dozens of bytes, and 13 were different between a regular osk and a maximized. Anyway, problem solved.

• I got the blue screen after update

  Hello. I got a bluescreen error after update my entire system today. He wrote:

  Signature of the problem:
  Problem event name: BlueScreen
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 1030

  More information about the problem:
  BCCode: 116
  BCP1: 85F5C510
  BCP2: 8E813DE0
  BCP3: 00000000
  BCP4: 0000000D
  OS version: 6_0_6002
  Service Pack: 2_0
  Product: 768_1

  And continued to restart every time I went into IE games, etc.
  What should I do?

  Hello

  Have you updated your screen/video or other great drivers latetly - check in Control Panel.
  Updates of Windows to see if a driver has been loaded it. Use this generic utility below
  and when you get to the section driver use the methods in the next message and then back to
  the troubleshooter as needed. In rare cases, antivirus/antispyware/security programs can
  cause this error.

  Also check with the support of system Maker and video/display of the map because he could be called
  questions - also check in their forums.

  BCCode: 116 0 x 00000116

  Bug VIDEO_TDR_ ERROR control has a value of 0 x 00000116. This indicates that an attempt
  to reset the display driver and recover a time-out has failed.

  BCCode: 116 0 x 00000116<-- read="" this="">
  * 1275.html http://www.faultwire.com/solutions-fatal_error/attempt-to-Reset-the-Display-Driver-and-recover-from-0x00000116-

  --------------------------------------------------------------------------------

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

  We can analyze the minidumps if make you it available the onedrive or another file
  sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
  for the office or in the Documents folder and download them from there. (Analysis of thethe)
  Minidumps is not necessary that you have updated the video drivers because it is
  very often the cause of the issue and only if the BSODS continue.)
  

  Adding files to your OneDrive
  http://Windows.Microsoft.com/en-us/Windows-8/getting-started-onedrive-tutorial

  A disk - sharing files and folders and change the permissions
  http://Windows.Microsoft.com/en-us/onedrive/share-file-folder

  ZIP or download the content of the C:\Windows\minidump

  Use OneDrive to upload collected files

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  -------------------------------------------------------------------------

  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  (also Windows 7)
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  ---------------------------------------------------------------------------------------------------

  The inclusion of 116 error in the troubleshooting code is the only coincidence and holds no.
  special meaning (other than pilot caused bluescreens occur with some frequency).

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard event viewer
  Windows. TIP - Options - Advanced filter allows you to see a period of time
  instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do without if needed fail or the Vista DVD or recovery command prompt mode
  Options if your system was installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all the)
  possible driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Dell your 2161DS remote console switch cannot change the Admin password after updated to the latest Firmware

  Dear Sir:
   
  After having updated the latest Firmware [Dell your 2161DS digital switch, Firmware, Multi OS, Multi language, Multi system, v.3.1.0.0, 1.3 (A03-00)] and restore the default settings. We do this directly through the Remote Console software.  Seeing the log in window, the user name is "Admin" and there is no password.  We can access in the switch, but "Admin" a/c is missing from the "User" settings category. So we can't change the Admin password.
   
  Could you help us to change any password Admin password?
   
  Thank you
   
  Tim.
  
  

• Cc Adobe is no longer in the menu bar after updating mac os el capitan

  I can still access my account... but the 'node' adobe icon disappeared from my menu bar higher after update from adobe.

  I use Mac OS El Capitan

  Thank you

  Hello

  Please see icon no. creative cloud in my main menu bar (iOS)?

  Re: Missing creative cloud of my Mac menu bar icon.

  Icon creative cloud missing in my Mac menu bar!

  I hope this helps!