Restore the output parameters

Similar Questions

• Try to restore the output audio multiples

  Hello, just joined the community of Windows 7.  Installed the RC.  Having some sound issues.  I was already a Windows XP user and the sound automatically went out to several devices, such as speakers and headphones.  I now find in windows 7, its fate only to the device "by default".  How can I change this so audio output goes to several devices again.

  In addition, just in case this is related.  My system has the front and back of the microphone inputs.  I had always used the front microphone jack.  Right now, my system is only says he uses the rear Mic Jack.  I tried to in the spirit of taking precedence no chance.  No big deal, except that it's really bugging me that I can't do this.  Check the Bios and have played around with the system devices.

  Note that my current config has the output of the speaker to the rear, headset and microphone from the front.

  You can expect that the speakers, microphone and headphones work 'PlugNPlay' that you insert the plug. Mixer devices appear as the sounds occur. The first problem can be linked to the second and separate speaker/headphone may be a problem with your audio driver, but I expect to find a settting in the tab "speakers' Panel of------Sound control to determine single or double performance for audio output. The microphone records don't step forward is unlikely to be a problem with audio driver. If its edge, the chipset drivers will do. I would like to download the latest driver chipset on the desktop, and right click to "troubleshoot compatibility" and try the Vista Mode. Approach of Oct 22 GA version, I think you can see new drivers showing, probably on Windows Update.

  Messages rating helps other users

  Mark L. Ferguson MS - MVP

• To access the output parameters of the human task

  Hi all.
  
  I encountered a problem I find
  very irritating. I already searched the
  Forum, and read in the net regarding
  This topic, but still have not been able to resolve
  the question.
  
  I have a simple type string variable
  ({[http://www.w3org/2001/XMLSchema]}, string)
  called "myName".
  
  First of all, I'm the initialization of this variable with the
  String "none":
  
  {color: #333333} & lt; assign the name = "setVariable" & gt;
  & lt; copy & gt;
  & lt; from expression = "string ('none')" / & gt;
  & lt; variable = "myname" / & gt;
  & lt; / copy & gt;
  & lt; / assign & gt; {color}
  
  Then, I'm passing this variable as an argument
  for a human task called "provideName", which has a
  editable attribute called 'userName ':
  
  {color: #333333} & lt; copy & gt;
  & lt; from variable = "myname" / & gt;
  & lt; variable = part of the "initateTaskInput" = "payload" query = "/ taskservice:initiateTask / task: task / task: payload / task: username" / & gt; ".
  & lt; / copy & gt; {color}
  
  Finally, just after the human tasks receive activity,
  I'm to pick up the so-called modified value and copy it
  Back to my variable:
  
  {color: #333333} & lt; copy & gt;
  & lt; variable from = part of the "provideName_1_globalVariable" = "payload" query = "/ task: task / task: payload / task: username" / & gt; ".
  & lt; variable = "myname" / & gt;
  & lt; / copy & gt; {color}
  
  After deployment and begin the process, I pretend that the task
  on the task list interface, change the next text field of the
  label 'userName' to 'none' to 'Tim', select 'APPROVE' and
  Press the button "GO". "." I get the "your request has been processed.
  successfully "-notice and the flow is reported to have"
  done, BUT: looking at the Audit trail, I find that the
  variable 'myName' has not really changed its value. There
  always 'none '.
  
  What I am doing wrong? I would be grateful for your help.
  
  Thank you!
  Pie
  
  -----
  Edited by: Tadhg207 (-& gt; format)

  Looks like you're doing all the right steps.

  The user saves the form (at the top right) before submitting?

  see you soon
  James

• Call stored procedures and using its output parameters in a report

  Hello
  
  I have a procedure defined in a package on the database. This procedure returns a number of output parameters. How to call this procedure and use the output parameters in my report?
  
  Thank you, Mark

  Depends on the level at which the procedure should be called. If its at the State level, call the form in the trigger-REPORT-BEFORE (or AFTER-PARAMFORM) and store the off-values space reserved columns. These you can use anywhere in your report.

• the output parameter mapping

  How can pass us values as output parameters that never I assign it says that it is limited and cannot be done.
  
  What values we can pass as output parameters. for a mapping of the output parameters.
  
  Thanks in advance.

  Hello

  You can use the function that you created in the process flow and set its result in a variable (or bind the output parameter of mapping a process flow variable), the variable can then be tested in conditions of transition, conditions, etc. in loop.

  See you soon
  David

• Just updated to ios 9 and my ipod touch is stuck at 'update of the iCloud parameters.  I can not restore from iTunes as I have to disable 'find my iPod toch' and cannot do the iPod is blocked with the message to update.  Will not work force a stop down.

  Just updated to ios 9.2 (from 8 something) and my ipod touch is stuck at 'update of the iCloud parameters.  I can not restore from iTunes because I have to disable "Find my iPod touch" first of all, and I can't do as the iPod is blocked with the message to update.  Forcing a stop down does not work that for some reason, I am unable to turn off my iPod touch manually.  I tried to turn off my wifi to see if that stops the iPod touch, but he always keeps on the message to iCloud.  Do I just wait until the battery sinks so that it forces a reboot?

  Place your iOS device into Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.

  iOS: I forgot the password or disabled device

  If the recovery mode does not work, try the DFU mode.

  How to put iPod touch / iPhone in DFU "Karthik doodles."

  To learn how to restore:

  iTunes: restore iOS software

  To restore backup see:

  Restore your device from an iCloud or iTunes backup - Apple Support

  If you restore from a backup of iCloud apps will be automatically downloaded. If you restore from backup iTunes, applications and music must be in iTunes since synchronized as music media library and apps are not included in the backup of the iOS device what iTunes does.

  You can re-download most of iTunes purchases by:

  Download after purchase from the App Store and iTunes Store iBookstore

  If no problem what happens or doesn't happen, and when in the instructions? When you get the iPod into recovery successfully mode and connect to iTunes on the computer should say that it found an iPod in recovery mode.

• Activate the output of Agilent 33210 without clear parameters

  Hi all

  I'm controlling a function generator Agilent 33210 A via USB with the IVI drivers installed on the host PC. I am trying to write a utility that compiles an executable file that will set up the generator and turn out. I want to allow for a scenario where the user configures the device once and then activates / deactivates the output repeatedly over time. I initialize the instrument with the call of hp33210a_init, set it up, turn on the output and then use the function hp33210a_close to let go of the handle and in the end things. This method works.

  My problem is that the only way I can configure the instrument is crushing the parameters on that. Once it is set up, I want to be able to turn on/off output using the settings that are currently on the instrument. I tried to use the hp33210a_init NOT resetting the instrument when all I want is to toggle the output, but the same thing: the instrument goes back to its default settings of the parameters I put on before--settings that worked. How can I turn on/off the output with my executable utility without the new parameters of enetering, which comes out once the user issued a command at the prompt (my utility works on the command line)?

  Thanks for the help everyone!

  Dima2882,

  The IVI drivers are programmed to load the default settings during the call to init. Here are a few suggestions, in order of the highest recommendation:

  1. Keep the same session open driver. If you leave the active program on the comand prompt, then you can keep the original session open all the time allowing you to toggle without changing any settings.
  2. Explicitly define your configuration options every time that you open the session. If each call to init is always followed by the ConfigureStandardWaveform and ConfigurePulse calls.
  3. The next two will be to enter you the drivers, make changes and their reconstruction. Change the default settings to match those you want. This way when the init calls the default settings, they are settings that you want.
  4. Change the driver so that the init call does not have the call to the default settings.

  The first 2 are preferred because you won't have to change drivers and reduce risks in the introduction of more complication. If they will not suited to your application, you must use CVI for open source driver, make the changes, and then rebuild the drivers.

  Let me know your opinion.

  Kind regards

• Should what output parameters I use for rendering the pc for mac final cut 10

  I recently spent from mac to PC and must make files to use on my machines to editors who are pimps. I need to know what output parameters, I should use to pull them into my graphics without any problem and must also ensure that the alpha channels are also available in the CF.

  It's a QuickTime .mov file. Now, you can do it is a PNG with AE sequence if you wanted, but I didn't think this is what you wanted. Select QuickTime as the format and PNG in the codec section. If you make sure you choose RGB + Alpha in your output module, you will also get your alpha channel.

• My mind is wiped out. I'll put up pages in Photoshop 9.0 to be then placed in InDesign 4.0 for professional printing. Can you help me configure the proper color settings, and what PDF preset to use. And output parameters, etc. Thanx.

  My mind is wiped out. I'll implement the color pages in Photoshop 9.0 to be then placed in InDesign 4.0 for commercial printing in book form. Can you help me with the settings of color in Photoshop, that is to incorporate the color profile; convert in space work, Adobe RGB, etc. and which PDF preset to use, i.e. printing, PDF / X - 1 or 3, etc. Also, what I have to select the output settings such as the conversion of colors with the Destination or the printer deals with that. I know I asked a lot, so thanks in advance for any input or advice.

  Best regards, ScottyB34

  What are the settings of your printer wants? Some may deal with sRGB some want Adobe RGB Ctrl/Cmd-Shift-k in Photoshop, then choose North Amercian prepress 2

  He'll take care of the tags for you, or if sRGB is important, Norh American General Purpose 2.

  Here is a summary of the settings PDF and their meaning:

  When you are ready to create a PDF file from an application such as Illustrator or InDesign Adobe, we give you a list of the predefined PDF settings from which to choose. Well how do you decide which is the right choice? Well, let me explain what they do.

  Let's start with the smallest file size and the name of the type of the story. It is compatible with Acrobat 6, which means that anyone who has Reader or Acrobat 6 or above will be able to open the file. Now it converts everything in sRGB color which is a common space for color monitor.

  All RGB is truncated to sRGB, CMYK and spot colors also. So that means if you have a job to print, you can see some color shifts in this outgoing PDF. You must decide whether it is acceptable. He can't stand live transparency, not flattened. It downsize image content to 100 pixels per inch and this is part of how she made a reduced file size. It also uses aggressive JPEG compression of poor quality on the content of the image. So, you can see some of these rectangular JPEG artifacts.

  But it is how it gives you a reduced file size, and results are appropriate to be posted online or attached to an email.

  High quality printing has compatibility with Acrobat 5 and above. There is no color conversion. RGB RGB stays, rest spot, stays of CMYK CMYK spot and it supports live, not flattened transparency. It does not perform some downsampling to 300 pixels per inch. So, for example, if you placed an image which was 300 ppi and then set to scale up to 50 percent there actually a res then 600 pixels per inch.

  Well, this process would take half out these pixels. Therefore, it can create larger files but that makes it suitable for in the House of printing or sending Let's say a remote office if they want to print we tell cells leaves, or brochures, or something like. It's beautiful out on an internal printer.

  Print quality and high quality printing have similar names, so this may be a bit confusing, but print quality has compatibility with Acrobat 5 or higher. It converts the content of RGB to CMYK destination values according to what you specify as the destination.

  It is usually SWOP, S-W-O-p. It supports live, not flattened transparency. It performs the subsampling bicubic to 300 pixels per inch and because that it keeps at least 300 pixels per inch, which means that it can create some large files, but it is suitable for professional printing.

  Then we start to get into the presets named 'X '. 'X' is now for Exchange. They agree on specifications and the idea is to have a set of specifications if a PDF file is compliant to these specifications, we know it's going to be printable.

  We know that imaging devices are going to treat them properly. So this goes back to 2001, and which can seem a bit old, but bear with me. PDF/X-1 has a compatibility with Acrobat 4. I know, it sounds old. It converts RGB to CMYK content, it keeps the content of good tones. It flattens transparency. Downsize it at 300 pixels per inch. It can large enough crat files if you have large size images in your project and that it is suitable for professional printing.

  The idea behind X-1 is if you send a PDF file to an unknown printer, you do not know what are their capabilities, you send abroad, it will be able to be photographed on any device. No matter the age, it is, they can print. Over the years, the concepts of Exchange became more sophisticated the workflow and devices become more sophisticated.

  SP PDF / X-3: 2002, remains compatible with Acrobat 4 and that means that it flattens transparency, but it does not perform any color conversion.

  This means that it maintains RGB content, place remains in place, rest of CMYK CMYK. He still performed bicubic downsampling at 300 pixels per inch, and therefore, it can create large files. But this is suitable for commercial printing, if the printer signals you that it is present RGB content is correct.

  PDF / X-4: 2008 is compatible with Acrobat 7 and later. See, we're getting more modern. No color conversion. RGB RGB stays, stays CMYK CMYK, spot rest spot and it supports live, not flattened transparency.

  He still performs bicubic downsampling. Therefore, it can create large files because it maintains the pieces of the image to 300 pixels per inch or higher and it is suitable for commercial printing, as long as the printer tells you that RGB content is not serious and dynamic transparency is acceptable. Some older workflow does not support dynamic transparency, or they treat well, and that's why always ask. It is a special case in Illustrator, something called default Illustrator. Its compatibility is Acrobat 6 or higher.

  It does not perform the color conversion, everything continues like this. It supports transparency live, not flattened, and it also contains the original, editable Illustrator file in the PDF file. It preserves layers and it may be return, can be reopened safely in Illustrator and it's really the only PDF format you can do with safely. But it can create larger files, because you sort of two files for the price of one, they sometimes get huge.

  So what predefined PDF is Right For You? Well, if you want to send for printing, the first thing you should do is to ask your printer how they want the created PDF.

  They should be able to give you the plug for the creation of the PDF file. They may be able to give you job options files you can simply import and use as your preset target. But if it's a stranger the printer or the printer for some reason any said, well, I don't know, just make a PDF and this happens, well, choose the lowest common denominator to the PDF/X-1 test. Anyone can image that. If it is a more modern printer and up to date, especially if you send it to someone who uses digital presses, PDF/X-4 should be safe.

  I always go back to point one, ask the printer. If you send it as an attachment or you're going to post online, well, smaller size of file is a pretty clear choice. But remember this, you can start with one of these predefined parameters, and you can always edit it to customize your specific needs. So get to know the presets, understand the destiny of the PDF you create, and then make the best PDF that you can.

• Adobe has worked on ambient light and changed the parameters of the product and I can't contact them to restore the product. How to get assistance to respond to me?

  Adobe has worked on ambient light and changed the parameters of the product and I can't contact them to restore the product. How to get assistance to respond to me?

  Hi Basilbro,

  Sorry for the trouble you had with Lightroom.

  Please visit this link to install the previous version - revert to a prior update version

  Concerning

  Rohit

• Æ choose whether to restore the audio output? Glitch? Help, please!

  Hey all,.

  Long after the user effects here. From 2 days there AE made a few videos with audio, some without. I used the SAME model of output module created by the user for all the renders. (Quicktime, Animation, Audio video on... the settings are no more deep than that.) and Yes, there is audio in the model (and it is enabled).

  I will make the place is off... no audio... do it again... maybe yes, maybe not, but nothing has changed.

  Anyone else running into this issue?

  System:

  CS5

  Intel i7 to 3.4 GHz

  16 gb

  64 bit

  4 TB hd

  Windows 7

  Thank you!

  You can also try to restore the default AE Preferences.  Key combinations are near the top of the page.

• Several uses for the final product, need help with Render & output parameters

  Aloha, this is my 1st time in this forum... posted this question in Premier Pro and has been mentioned here.

  I created an effect straight project. I want to make four 4 very specific uses.  Unfortunately, I don't know anything about these formats to be given options in AE - CS4.  One of the many 'rendering settings' and 'output module' settings 'make model '.  This seems the best option for me given my future use: 1) for the DVD; (2) for electronic mail; (3) for YouTube. (4) my web site.  I read and reread the rendering and export options in the manual of use-AE CS4 without success in understanding what each option should be used for.  I need help in the translation of pixelpicker-talk.

  Can someone help me about these accurate "rendering settings" and "output module" parameters listed in AE in the option "make and model"?

  Thanks a lot... come visit the watrer is warm and clear as always.

  KonaDon

  I understand - I think the article using After Effects is a very complete resource, explaining the various features and their purposes. But the real world is full of special cases that are very difficult to address in a manual. In addition, it is a moving target. Different best options today probably the best choice, next year.

  Let's see if we can help here:

  1-. DVD: on the technical side, it is always MPEG-2. A very specific taste of MPEG-2. But while After Effects will let you export a file of this type (choosing the MPEG - 2 DVD is predefined in the output Module), it is also true that most of the applications (such as Adobe Encore DVD) DVD authoring are very friendly in terms of letting you wear one (ideally, uncompressed) Quicktime or AVI (which in no way is compatible DVD) and do the encoding in MPEG-2 for you. So it is up to you: you can encode EI using the preset DVD MPEG-2, or you can use an application of coding specialized (such as Adobe Media Encoder in stand-alone mode) or simply let the DVD authoring application do the encoding for you. This should be very simple and in this case, you can simply render a Quicktime or AVI file without loss (there is a model of output Module called "Lossless" who will take care of everything. You can use the default value, the 'best' model to make settings in most cases).

  2-. E-mail: on the one hand, you need something that is really light and as good quality as possible. In the other, you want something universal compatibility, which can be read in all or almost all computers. H264 (advanced version of MPEG-4) format is really good in terms of efficiency, but its ' adoption is perhaps not as widespread yet. Flash Video (FLV) is really good in this regard. In this case, you could choose Adobe Flash Video (FLV) as the format in the output Module and then choose preset FLV 'Flash 8 web small' for this purpose.

  3 YouTube: it's not that simple. The ideal format for YouTube is not quite exist, they insist on the re-encoding each file that you download, even if your file is technically identical in every way to their versions. So what you want here is something that looks good and it isn't huge to download. This all spells 'H264', in my opinion. The details depend on the question of if your Composition is HD or SD, 4:3 or 16:9, etc. Strange as it may seem, the big "iPod" preset for the format H264 is a good starting point. You can customize it to increase the speed of transmission a little (maybe 2 or 2.5 Mbps, against 1.5 Mbps).

  4 website: even once, you need something that most people already have in their computers. Flash Video is an excellent choice, since about 98 percent of users have the Flash plugin. But in this case, you can have more great heights and flow rates, so you can use the "Flash 8 big' defined by default as a starting point. Once the Flash 10 plugin (which now supports the H264 in addition FLV) spreads in the future, you could standardize on H264 in a delivery format, with different settings for each type of destination.

  I hope this helps.

• How to automatically restore the session after a crash/update / without asking me if I want to restore it?

  Hello, there are times that my Firefox crashes (well, it happens to all of us who use it to some extent) or updates asking to restart. I would like to know if there is an option that allows you to restore the previous session automatically without asking me even. It would be very useful for reasons. I had this kind of problem a couple of times ending me be upset. Sometimes I misclicked and lost all my important tabs. Other times my firefox has crashed/shifted on after reboot and guess what sound restart still has not even asking me if I wanted to restore my session crashed.

  Thank you in advance.

  Cesarius Hi, I think I understand, but I have not explained completely.

  The browser.sessionstore.max_resumed_crashes preference is to avoid an infinite loop. The default value 1 means an attempt to restore the session automatically once and if it fails (for example, it crashes before it can finish to restore), then display the "embarrassing". You could try to increase the value of 2 or 3 and see if it works on the second or third time. If you still see the screen "This is awkward" after a crash, Firefox still does not make a failback.

  You can also check if there is a file user.js in your profile folder. A user.js file is a file of optional parameters that Firefox reads at startup and uses to override the settings saved in your previous session. Unless you create a user.js file yourself, you can usually just remove it. This article includes a section on the hunt for a possible user.js file: How to fix preferences that will not save.

  Note: by default, Windows hides the .js file extension. Precise work with file names, I suggest setting windows to show all file extensions. This article has the steps: https://www.mozilla.org/firefox/all/

• Restore the Contacts from Iphone restore

  I'm very frustrated by that.  I had to do a total restore my Iphone 5 as a result of an error in the former area software and storage being gone.  I backup of the phone before doing this, but that the backup is worth nothing because to restore the previous backup would return to restore the bug in the software again.  So I basically had to a do a new restoration of the phone and gradually bring only my necessary stuff on the phone.  I can't seem to get the contacts and calendar, that I had to come back and I see on Itunes there is a place to synchronize those.  Still when I sync them they are not restored.  My contacts have some inside information, but lack of contacts.  Those who are there are missing phone # s and addresses e-mail.   I can see the calendar and contacts that they were originally on my Ipad so I know that they are at least there.  Are not the contacts and calendars supposed to migrate in Icloud and update all my Apple devices (I have a Mac Pro too) so that they are compatible?  If there are some parameters jiving not somewhere I'm lost as to what to do and what devices for all works in harmony.

  My plan is to do a backup of my phone after I put everything so that I have a clean backup, that is not a bug in there and has all the correct information.

  Hello heffmonster,

  Thanks for this info and choosing the communities Support from Apple. I know how important getting your contacts on your iPhone is to you! From what you said, it seems you maybe problems with having the correct accounts added to your iPhone after you restored, since you mentioned that the lack of contacts are on your iPad. You asked if iCloud syncs contacts, and he does, but only those in iCloud. iCloud will not synchronize contacts that are related to other accounts, such as Gmail, Yahoo, Hotmail, etc. I check what are the accounts on your iPad and make sure your iPhone has the same ones added correctly. This article can help explain more about the use of Contacts on your iPhone:

  Add contacts - iPhone help

  See you soon!

• How to restore the title bar? Title of the page displays only the tabs - this is not good enough

  I'm used to be able to see the title of the page in the title bar. Firefox has removed this feature, and now I have to mouse over the tab to display the title of the page. It is another example of extracting the characteristics that people use for reasons that I don't understand. So far, I had to install two 'add ons' to restore the common features on previous versions - and always on IE and Chrome.

  1. Right-click on a zone empty of the tab bar and select Customize.
  2. Click the button on the title bar in the lower left corner.
  3. Click the Customize output button when finished.
  • Customize controls, buttons, and Firefox toolbars