Æ choose whether to restore the audio output? Glitch? Help, please!

Similar Questions

• How to change the audio output for the metronome

  Hello

  I would like to send the metronome (and speech signals) for monitors to the scene in the ear.

  I understand that I can do this in MainStage using different output for the above titles vs. the rest of the 'Concert '.

  I tried to follow the instructions of the Manual:

  Change the audio output for the sound of the metronome

  1. Choose the MainStage > Preferences > General.
  2. In the section of metronome on the general tab, choose another audio output on the shortcut menu to exit.

  PROBLEM

  1. on the general tab, only the outputs 1-2 are available/selectable (likely, these are also by default for all "Concert")

  2. Why is this process in the manual if it is not executable (without doing something to another additional Set up)?

  3. it's probably among the requirements of setting up more critical even easier for using MainStage with a live band, so why am I having to ask for help at all!

  Rant on (its been a long day)

  Grateful for any help to solve cela. I guess I can send the metronome (such as a click track) and speech signals on the same outputs, which are separated from the rest of the Concert... or should I change the outputs on the other tracks and keep the outputs 1-2 for the metronome marks / voice?

  Thanks in advance for all advice and my apologies for my frustration. JM

  To access the output audio, you need an audio interface with several outputs.

• Can I control where is the audio output?

  I built in sound on my motherboard (Asus Socket 775 using Realtek Audio).  So many times I need to switch between the different audio outputs.  Surprisingly its very difficult to find an external box which accepts audio and can spend 2 or more outputs. Most of us use a helmet, then quality maybe, headphones and speakers a speaker, etc.  Most of us need at least 2 output audio.  In any case, I tried to connect my headset to the rear and side outputs and it sounded identical to the front channel output of channel 2, 4, 6 or 8 in the Realtek audio program.  Really identical.  I went repeatedly back and forth to make sure.  There was a small delay in the sound that passes through when I plugged in the rear (in mode 4 channels) and side (in mode channel 6 or 8).  But the sound itself was the same in all directions.

  Does anyone know why it would be the same?  Was it because it was coded in stereo?  Wouldn't the audio program Realtek tries to synthesize multichannel for the side and the rear channels?  Central/subwoofer channel was mono so that makes sense.  And the mic input works fine.

  If I could control what output I wanted to use I have a selection of 3 outputs (front, side and rear) to choose from.  Helmet quality, headset for chatting, and speakers.

  I realize many computers have outputs audio to the front and back but I don't use that nor do I have the header for this Panel.  I don't know if there is a provision to switch between front and rear exits.  If there was it would be a great addition.

  But as everyone knows, it's a pain to switch the outputs in Windows.  You must start sound in the Control Panel, go to Audio off the 5 tabs, choose which output desired, apply, OK.  I put the sound on a shortcut but its still a pain.  And there are often close the application using the audio output as well.  A mechanical switch could be fleeting and the right side of your keyboard or your mouse.  A volume on the same box control would be smarter.  There is always a delay when you adjust the sound in Windows that would be better avoided.  You could do the same for the microphone so he could be muted most of the time, then passed to the headset or a speaker application where you are a little ways away from your desk.  Software switching does just fine.

  Hello

  I suggest to browse the Internet using your favorite search engine and look for applications that perform the tasks you need.

  Warning: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• Satellite A80: How to restore the audio and video codecs?

  How to restore the audio and video codecs that are installed by default on my Satellite A80 with XP Home edition?
  I removed the safe mode, due to a problem with the Pinnacle Codec installed by Pinnacle Studio 10.
  Now, I need to put the video standard in audio codecs.
  I already downloaded the Microsoft Mediaplayer codec package and video sound new fr in Media Player.
  Unfortunately I have always its program to diagnose Toshiba during the test of its Midi and Wave.
  System Restore came with the message that the restoration was not possible because no changes had been made.

  Post edited by: roel

  Hello

  Try to use the tool "system restore."
  This application restores the operating system to the beginning.
  Maybe it will work.

• L50-A-11 t satellite - cannot set up the audio output

  Hello

  I have a Satellite L50-A-11 t with Win8.1, and I can't set it up to get the sound out of the speakears computer and the speakers connected to the audio output.

  The realteck controller does not show me almost any configuration option, is this normal?

  Mate sorry but the message isn't clear enough.
  What do you exactly do with Notepad and the speakers?
  You speak of internal or external stakeholders?

  The sound of s notebook (record and playback) can be configured in the control panel? sound. There, you will find the Read tab (lists all the devices as speakers, headphones) and tab (internal microphone, external microphone) record.

  You must mark the device as default device, if you want to use.

• Change the audio output default usb headset speaker 3000 Microsoft livecaht

  Yesterday, when I ran my Rosetta Stone language software that I heard noise coming from my newly installed Microsoft Live Chat 3000 USB headset, today, when I run the software, the microphone still works. But the sound comes through the speakers of the laptop. I looked through Windows and cannot find a place to tell windows to use the headphones to the audio output.

  I saw a similar problem on this site and followed the recommendation to remove the Chuck and download the latest driver on your part and re - install but still the sound comes through the computer speakers.

  Can my children re-configured something but he does not confess to it. But I do not understand why remove then re-loading the drivers does not work. I use Windows XP SP3 entirely under license and updates.

  I have them just a couple of days ago take their back and try something else?

  Thank you

  Try Control Panel, sound, properties, change the headset speakers, also, R.click

  the President of the clock opens, properties, adjust.

• T400 2765 T6u, vista 32 b which distorts the audio output on my videos

  My T400 has poor visual quality in images and videos a week ago.  After that I updated the graphics driver, images, photos and videos are ok now, but the laptop is to distort the audio output on my videos. Can someone help me with this problem?

  Thank you

  guoclu

  I updated my audio driver and bought another helmet and solved the problem.  I don't don't know why my previous headphones does not work for t400-, it works perfectly for my office.

• How do we install the audio output device?

  How do we install the audio output device?

  Usually, plug you speakers or a connector into the line-out or speaker of your sound card. You may need to update your audio drivers to get all the features of the software. What sound card do you use? Built in or add on the map?

• Make crashes if the audio output selected

  Hello

  I'm having a problem with AE CS5. Whenever I try to make a video, it hangs on the first image and does not provide for as long as I selected audio. If I deselect the audio option in the output settings, then the video without hesitation. Audio works in the RAM Preview, however. I tried to export to AVI, WMV... no luck. Finally the error 'an output module no longer"appears.

  I am running Win 7, i7-820QM, 8 GB memory DDR3. I don't think that it is a hardware problem, but I don't really know the source of this problem either.

  If all goes well, there is an easy solution for this.

  Thank you

  Andrew

  Hey guys,.

  I was able to solve this problem. I'm not sure where the conflict is / was, somewhere, but here's what worked: I have created a different user account and shot to the top of AE. For some reason, the audio output module works perfectly on this account, and the audio preview RAM working more regularly on this account also. I do not uninstall any software or codecs suspicious right there. I'm not running that much more on my main account in relation to the other - can - be an antivirus or something similar - buy Hey, I'll take the same unexpected happy result. Thanks again.

  Andrew

• Aspire 5745 audio worked. Now, it is not the case. Can not find the audio device. Help

  I lost my audio.  If I look in the Device Manager, it doesn't even have and the entrance to the sound and video controllers.  I need to know how to restore the audio device, then what that drivers to use.  Thanks in advance.

  Michael

  Bluetooth worked.  Now I'm back in business and everything is good,

  Thanks for your help.

• Error blue screen STOP: 0x0000007e. I powercycled the sys, unable to choose for sure (keys do not work when you try to select a mode) sys is trying just to go back to the blue screen. Help, please

  STOP: 0x0000007e (0xc000001d, ox8537008 0xba4c3508 0xba4c3204) and the system would not come to the top.

  Error blue screen STOP: 0x0000007e. I powercycled the sys, unable to choose for sure (keys do not work when you try to select a mode) sys is trying just to go back to the blue screen. Help, please

  Symptoms: Booted computer, loaded the raid drivers and showed at the start screen XP for half a second then to BSOD with a Stop error Code 0x0000007E - see also a lot of users (0xC0000001D, 0 x-, etc.) as well.

  Solution:

  1 boot from your Windows XP CD and start the recovery console. You may need to press F6 while RC loads in order to load the SATA drivers. you will have a prompt c:\WINDOWS to the console.

  2. type: CD $NtUninstallKB977165$ \spuninst (it's the update, I had to uninstall to get out of the boot loop, other updates can be uninstalled by changing the name of the directory to $NtUninstallKBCODE$, where KBCODE is the code KB)

  3. type: BATCH spuninst.txt

  4. type: exit

  Don't forget to configure your system to boot from the HD before resuming. I hope this helps. Saved me a lot of hassle today.

  -Tom Steele
  http://www.hawkandtom.com Tom Steele

• How to find the serial number of the processor in the MacBook pro s serial number? I have a dead MacBook that was given for service to a third party. I doubt that they have replaced the original parts. Help, please. Thank you

  How to find the serial number of the processor in the MacBook pro s serial number? I have a dead MacBook that was given for service to a third party. I doubt that they have replaced the original parts. Help, please. Thank you

  As far as I KNOW, the serial number of the MacBook does not have the serial number of the processor.

• How to save a password changed in Firefox? I rescued him, but then I changed the password and it doesn't give me an option to save the new password. Help, please. Thank you!

  How to save a password changed in Firefox? I rescued him, but then I changed the password and it doesn't give me an option to save the new password. Help, please. Thank you!

  The Web site may use autocomplete = off to prevent Firefox to record the name and the password.

  You can remove autocomplete = off with a bookmarklet to register the name and the password of Firefox.

  • http://KB.mozillazine.org/User_name_and_password_not_remembered
  • Saved password Editor: https://addons.mozilla.org/firefox/addon/saved-password-editor/

• I got an iphone 4 to a friend in the Canada. I want to use it here in the Philippines as a regular iPad reserved for wifi, how can I use it without sim card? It does not pass the activation page. Help please?

  I got an iphone 4 to a friend in the Canada. I want to use it here in the Philippines as a regular iPad reserved for wifi, how can I use it without sim card? It does not pass the activation page. Help please?

  You can activate it without a SIM card. If it is locked, it takes a SIM card by the carrier, for it is locked. The SIM card should not be linked to an active line of service, but it must be present to activate it.

• you just bought an iPhone6. My contacts were transferred a manager of T-Mobile Samsung Galaxy 6 mt. I can't find them on the new phone. Help, please! Thank you.

  you just bought an iPhone6. My contacts were transferred a manager of T-Mobile Samsung Galaxy 6 mt. I can't find them on the new phone. Help, please! Thank you.

  You still have your old phone?

  Were your contacts on email like Outlook or Gmail?

  Switch from Android to iPhone, iPad, or iPod touch - Apple Support