the output parameter mapping

Similar Questions

• An operator of power output parameter mapping

  Hello. I use on the 11.2.0.2.0 Oracle Database 11.2.0.2 OWB.
  
  I fight and need a pointer. I am trying to create a map that will pass parameters to USER_DEFINED operator in a process flow. I'm going by the following example.
  
  http://blogs.Oracle.com/warehousebuilder/entry/how_to_use_user_defined_activity_in_owb_process_flow
  
  But he gives no details on how to build the mapping. The settings I want to spend are stored in a database table, and I have a packaged procedure that takes a parameter (the key) and returns the three parameters that must be passed all the way to the user_defined in the process flow. The procedure basically collects the values of the parameters as the lines and the pivots in columns.
  
  I created a map containing a constant for the key, a mapping process before you run the proecedure and an operator of output parameter of mapping as the target of the mapping. I don't know if the prior mapping process is what I use. But I don't know what else to try. As it is, the mapping will not validate.
  
  I had already tried to use an operator unpivot instead of the procedure (btw, why do pivot/unpivot have meaning in SQL and the reverse in OWB?).
  
  Please suggest the best approach to send my parameter values to the output parameter of mapping operator. Thank you.

  Hello

  I suggest you write a pl/sql procedure to the hand that holds the key as a parameter and the three return values as of the settings out. Import it in owb and drag it in the process flow. Bind variables of process flow to the transformation parameters, then to USER_DEFINED operator settings.

  Kind regards
  Carsten.

• Impossible to activate and deactivate the button "submit" all keeping the condition on the output parameter

  Hello

  I try to enable and disable the submit button based on the status of output parameter that I call in lov.

  Concerning

  Asia.

  
  

  Hi AJ,.

  Thanks for the reply

  I tried the method above, but it does not work.

  I am trying to enable and disable the submit button based on two input parameters and an output parameter.

  Based on two input parameters, I'm able to get the output parameter, and if the output parameter is "S" then iam allowing the submit button.

  on the other

  disable the submit button.

  Here is my code:

  IAM calling this co

  OASubmitButtonBean submitbean = (OASubmitButtonBean) webBean.findChildRecursive ("Submit");

  String crreason = pageContext.getParameter ("Reason")';

  Invnum string = pageContext.getParameter ("InvoiceNumber");

  String status = "";

  String ValidationDesc ="";

  OADBTransactionImpl oadbtransactionimpl = (OADBTransactionImpl) getTransaction ();

  Try

  {

  String sql_qry = "BEGIN WEPIS_CM_DM_PKG. WEPIS_CM_RAISE_VALIDATION (P_CM_REASON =>: 1, P_INVOICE =>: 2, P_VALDIDATION_S "+)

  "(TS =>: 3, P_VALDIDATION_DESC =>: 4); END; « ;

  OracleCallableStatement sqlstmt = (OracleCallableStatement) oadbtransactionimpl.createCallableStatement (sql_qry,-1);

  sqlstmt.setString(1,crreason);

  sqlstmt.setString(2,invnum);

  sqlstmt.registerOutParameter(3,Types.CHAR);

  sqlstmt.registerOutParameter(4,Types.VARCHAR);

  sqlstmt. Execute();

  status = sqlstmt.getString (3);

  ValidationDesc = sqlstmt.getString (4);

  If ("S".equals (status))

  {

  submitbean.setRendered (true);

  }

  on the other

  {

  submitbean.setRendered (false);

  }

  }

  catch (SQLException sqlexception)

  {

  throw OAException.wrapperException (sqlexception);

  }

  catch (System.Exception Exception)

  {

  throw OAException.wrapperException (exception);

  }

  Concerning

  S.Asia

• Get the output parameter of workflow using soap in PHP

  Hi all, I have a question on how to print the output in php parameter using the soap Protocol. I create the workflow with 1 single task scriptable with variable name of virtual machines as output like that.

  var sdkConnections = VcPlugin.allSdkConnections;
  vms = new Array();
  for (var i in sdkConnections) {
    var host = sdkConnections[i];
    var found;
    if (host.isInventoryServiceAvailable()) {
    found = host.getAllVirtualMachines();
    }
    for (var j in found) {
    vms.push(found[j]);
    System.log(vms);
    }
  }
  

  And my php, source code

  <?php
  
  include ("parameters.inc");
  $vco = new SoapClient('https://' . $vco_server . ':8281/vmware-vmo-webcontrol/webservice?WSDL');
  $workflowid = "f73f2521-0e6b-48e8-81b9-388b13fc3fea";
  $param = array(workflowId=>$workflowid,username=>$vco_user,password=>$vco_pass);
  echo '<br>';
  
  $result3 = $vco->executeWorkflow($param);
  print_r($result3);
  echo '<br>';
  
  foreach ($result3 as $token)
  {
          $tokenID = $token->id;
  }
  
  $param2 = array(workflowTokenId=>$tokenID,username=>$vco_user,password=>$vco_pass);
  $wftokenstatus = $vco->getWorkflowTokenStatus($param2);
  print_r($wftokenstatus);
  echo '<br>';
  
  $wftokenresult = $vco->getWorkflowTokenResult($param2);
  print_r($wftokenresult);
  echo '<br>';
  ?>
  

  When I try the same, executed release in web

  stdClass Object ( [executeWorkflowReturn] => stdClass Object ( [id] => ff808081440b6eb90144316de4bc04fe [title] => Copy of Get virtual machines by name [workflowId] => f73f2521-0e6b-48e8-81b9-388b13fc3fea [currentItemName] => __item-undefined__ [currentItemState] => running [globalState] => running [businessState] => [startDate] => 20140215002449+0700 [endDate] => [xmlContent] =>         ) )
  stdClass Object ( [getWorkflowTokenStatusReturn] => )
  stdClass Object ( [getWorkflowTokenResultReturn] => stdClass Object ( [name] => vms [type] => VC:VirtualMachine [value] => ) )
  

  I see in customer orchestrator, my workflow work well and in the logs tab I see all my VM appear, but I'm trying to print all components of table in my php script using print_r(), the value of the object always null, only can get name and type as above... No idea how to get the value of the output parameter?... Thanks before

  Change this code to your:

  for (var j in found) {
    vms.push(found[j]);
    System.log(vms);
    }
  

  To do this:

  for (var j in found) {
    vms.push(found[j].name);
    System.log(vms);
    }
  

  In this code, j is a VC:VirtualMachine object, instead of pushing the entire object in your table, just push the virtual machine to .name property. Additionally, make sure that your output variable is of type: Array of Strings

• Is the version of the output parameter 32 bits 12.1.0.2 Oracle ODBC driver truncating values a known issue?

  We test 12.1.0.2 Oracle and ODBC see problems with the stored procedure being cut output parameter values and Associates when we use the 12.1.0.2 driver (we use the 32-bit version). We see a function sequence error every time that happens, too.

  For example, a stored procedure takes a NVARCHAR2 name and it out as a separate NVARCHAR2 output parameter. Using the 12.1.0.2 of the ODBC driver, if we "Basketball", the output can be "Basketball" (with a function sequence error).

  What is happening to many of our stored procedures. We do not get the errors of sequence of function or output truncated if parameters we use the 12.1.0.1 version of the ODBC driver to connect to our 12.1.0.2 database, or if we use the version 11.2.0.4 or 11.2.0.2 ODBC driver.

  Is this a known problem in the 12.1.0.2 ODBC driver?

  Thank you

  Daniel Meyer

  to submit a bug report to MOS

• Get the error on the output parameter when creating the effect

  Hi guys, I develop an adobe after effect plugins recently, thanks to all those who help me during this period. Now, when everything all right and I want to build it on a release, I got the following error:

  

  

  Here's my output setting:

  

  what I'm missing? However, it works ok on the debug version.

  Hello

  I found the solution for the release configuration:

  

  Trun on the links/debug Editor, then set Generate Debug Info--> optimize the debugging (?) DEBUGGING)

  Thank you all

• How to call the output parameter during the execution of a procedure

  Hello
  
  I wrote a small procedure using parameter, how can I call this procedure?
  
  exec prc_TABLE('emp',1)
  
  I tried prc_TABLE ('emp') that the two do not work?
  
  Any help would be appretiated.
  

  create or replace procedure  prc_TABLE (str in varchar2,
                                 CODE  OUT number
                                                 )   
  
  Begin
  
       CODE := 1;     
  
       DBMS_OUTPUT.PUT_LINE(code);
       
  end;
  
  /

  Zaid

  >
  I wrote a small procedure using parameter, how can I call this procedure?
  >
  You can not call SQL - if that's what you are wanting to do. You can only call functions of SQL, and these functions cannot have OUT parameters.

• Service Web REST-output parameter does not work in the Manager POSITION

  I created a RESTful Web Service in Oracle Apex, using a POST method as a 'Manager'   I have installation 11 input parameters which all work fine, this is my setting an output that does not return successfully.

  Here are details on the output parameter

  Name: returns

  Name of the bind Variable: : return

  Access method: OUTPUT

  Source type: response

  Parameter type: String

  The actual source is a call to a pl/sql package that returns a value that I set: Returns equal to (for example: Returns: = v_result).   I tried this with header Type of Source and still the same result, "no exit".

  I see APEX calls wwv_flow_api.create_restful_param to generate the (import) settings, is there documentation on this procedure?

  How can I get this output parameter to return something to the answer?

  The application accepts a load of Json.

  Any help greatly appreciated

  Thank you

  James

  Solved my problem: feedback does not need to go back

  Does not work

  Name: returns

  Name of the bind Variable: : return

  Access method: OUTPUT

  Source type: response

  Parameter type: String

  Works

  Name: returns

  Name of the bind Variable: returns

  Access method: OUTPUT

  Source type: response

  Parameter type: String

• Switch the output of a workflow parameter to another workflow as input parameter?

  Hi all

  I have created a list of resources and want to add a virtual machine in this resource pool. There are two workflow, 1. Pool of resources & 2 creation. Cloning a VM. I'm creating a different workflow and by adding this two workflow. I don't know how to pass the value of the output parameter of the first stream of work performed as input to another workflow running. Can anyone help? Can anyone attach the workflow example?

  Thanks in advance.

  Hello

  You must create workflow attributes (in the "General tab" of your workflow) and link out of the first workflow settings that you call to them. You can then link the same attributes as parameters to the second.

  Watch this video (and all others in the www.vmwarelearning.com/orchestratorseries) for an explanation: http://vmwarelearning.com/2nB/understanding-variables-and-variable-binding-overview/

  See you soon,.

  Joerg

• process flow sequence (output of mapping)

  I have a map where I use the operator sequence and creating a record in the target table, I need to pass this variable out of the mapping and as input to another mapping. I'm not able to go to the sequence of the mapping. How we can assign values to the mapping of the output variables but I do it it says cannot assign variables to the output parameters of the mapping, it is said.
  
  parameter of input and output parameter mapping mapping are intended to be run before and after the stream of mapping and the cannopt accepts input from any part of the data stream.
  
  Any ideas as to how this can be done.
  
  A plug-in mapping can be called in a process flow.
  
  Thank you
  
  Published by: user8023060 on June 23, 2009 06:08

  Hello

  write a plsql function that executes returns seq_XXX.currval (or, to be on the safe side, select the value in your table).
  Set this value to an output attribute.

  And no, pluggable mappings can be simply included other mappings, there is no way to run them directly.

  Kind regards
  Carsten.

• Appeal procedure in another procedure using the Out parameter slider - lesson

  Hello

  I am new to Oracle development so first I wonder if it is a good place with a simple way of the of on how to create stored procedures?  I'm looking for the most part at this stage for a quick read.

  Second, currently have hacked and slashed my way into getting one built.  It has 3 parameters and an output parameter sys_refcursor.  This procedure works.

  I want to have another created procedure that will call the above procedure and loop through each row in the setting out and write to a file.  Can someone point me to an example of this by any chance?

  Thanks for the help.

  Hello

  e28d78d3-c6c6-4BCE-b14f-0f6bf26fa17c wrote:

  Thanks for the reply.

  Here's what I have, but I'm getting many errors.  When I seem to fix one that I get a new one. Kind of like what it show me all questions vs one question at a time.  I never know if I create another error of my attempts at fixing what, in my view, could be the problem.  In any case, something to get used to.

  When you do any type of programming, take baby steps.  Write less code as possible, test what you wrote ' worm and, if it contains errors, correct them and test again.

  The PL/SQL compiler tries to show all errors, but often it is impossible to say what is a separate mistake, and which is a consequence of a previous error.  For example, the DECLARE statements in your code are perfectly valid PL/SQL statements, but they are the mistakes in the sense that they are not what you think, and you may not use them.  PL/SQL does not know that (I don't really know that, either, but I'm willing to guess in this case).  The works of compiler on the explanation that you really wanted to say SAID, until what it becomes obvious, maybe several lines later, that something makes no sense, but at this time, there is no way he could say that the undesirable DECLARE was the cause.

  So here is where I am stuck currently.  What I want should first, run the stored procedure and I think I do as you suggest.  Which returns data in the output parameter, which is of type sys_refcursor.  I think I would need to loop through each element that cursor and output to the file using the dbms_output you reference and like I did below.  This should be it.  Sounds simple enough, but it's where some of the basics for me.

  For example, by creating the procedure some examples have the name of the procedure and then some "AS", "IS".  When use the beginning and the end and when not I need?

  There is no difference betwwen

  CREATE PROCEDURE... AS and

  CREATE PROCEDURE... Use IS the one you prefer.  You must always one or the other, however.

  PL/SQL is written in blocks.  The basic structure of a block is

  DECLARE - optional, sometimes involved

  ...

  BEGIN

  ...

  -Optional EXCEPTION; forget it for now

  ...

  END;

  Almost all of the PL/SQL code is part of a block.  In fact, you could argue that anything not in a block isn't really PL/SQL.  (For example, CREATE PROCEDURE is really an SQL, PL/SQL not, it indicates the SQL that some PL/SQL compiler is coming.)

  You should always BEGIN and END keywords in a PL/SQL block; None is never optional.

  I think I'm doing the for loop correctly but I get an error on the portion of loop-end.  It is a part of these simple things that become I think that.

  That's what I have:

  CREATE OR REPLACE PROCEDURE APPS.boact_report_3

  AS

  DECLARE v_cur SYS_REFCURSOR;

  DECLARE v_file_out UTL_FILE.file_type;

  BEGIN

  I said earlier, DECLARED may be implied.  It's one of those places if there is nothing after CREATE PROCEDURE... IS and before STARTING, it is supposed to be a statement.

  You can have as many statements (0, 1, 2 or more) that you want in this section of the statement.  The semicolon at the end of each of them is all the separation you need each other; you don't need any keyword as STATED.

  Open the v_cur for

  bo_report (p_sv_id, p_start_date, p_end_date, out v_cur);  -stored procedure that girls v_cur witch is a sys_refcursor parameter.  It works

  END;

  BEGIN

  Don't forget, how to call a procedure is

  bo_report (x, y, z);

  not

  bo_report (x, y, z OUT);

  The key words are only necessary (and only used) in the declaration of a procedure, not in his appeal.  When you create a procedure, you decide if each argument is going to be an argument IN, an OUT argument, or IN OUT argument, and you tell the compiler that you decide.  When you call a procedure, you have no choice; each argument is IN, OUT or IN OUT has already been decided, and suffice to say compiling what are the variables (or expressions) that you use to play these predetermined roles.

  Dbms_output.put_line ('Date: ');

  v_file_out: =.

  UTL_FILE.fopen (' / public/scripts/smorau02 ', 'w_act.csv', 'W');

  FOR x IN v_cur

  LOOP

  () UTL_FILE.put_line

  v_file_out,

  x.cl_num | ','

  || x.wa_id | ','

  || x.Description | ','

  || x.a_date | ','

  || x.a_by | ','

  || x.v_Name | ','

  || x.SITE_NAME | ','

  || x.stage | ','

  || x.in_queue);

  END LOOP;

  UTL_FILE.fclose (v_file_out);

  END;

  Thanks again for the help.

  You have not to send the code to bo_report, so I can't run the procedure.  I do not notice any obvious mistakes immediately superior.

• the size of the out parameter in the procedure

  Hi all:
  
  I have a procedure in a pl/sql package like this:
  create or replace procedure MyProc (PRM_STR in VHARCHAR2, PRM_OUTSTR OUT VARCHAR2) is
  V_TEST VARCHAR2 (100)
  Start
  +...+
  V_STR: = SUBSTR (PRM_STR, 22, 31);
  V_TEST: = TRIM (V_STR);
  PRM_OUTSTR: = V_TEST;
  EXCEPTION
  WHILE OTHERS THEN
  +....+
  myproc end;
  
  When I run it, it always gives me an exception: ORA-06502: PL/SQL: digital or value error: character string buffer too small.
  Then I debug him:
  V_TEST: = TRIM (V_STR)
  is OK.
  While PRM_OUTSTR: = V_TEST, it throws this exception.
  
  I was confused, the out parameter in the procedure has a size? How can I set it?
  
  Please help me!
  Thank you very much!

  You must declare the size of the variable you use in the call to the procedure to be big enough.

  The output parameter itself may not be declared with a size:

  for example

  Your appeal should be something like the following:

  declare
  v_prmstr varchar2(4000)  :=  'Your input value';
  v_prmoutstr varchar2(4000);
  begin
  myproc(v_prmstr,v_prmoutstr) ;
  end;
  

  v_prmoutstr must be reported to be large enough to contain the value returned by the parameter
  PRM_OUTSTR

  added example variable
  Published by: Keith Jamieson on August 11, 2011 13:32

• the parameter mapping constant to a control block Veristand simulink block

  Hello

  I'm trying take a simple model of an RL circuit in simulink (build a DLL) and control of the constant blocks in Veristand to dynamically change the value of R and L constant through Veristand Slider indicator or digital. I can see the output of the model run, based on the initial values that I have loaded, but I'm not able to mapping of these parameters to any digital control.

  Any thoughts on how to do this!

  Hey, Trever,.

  You must use a command of calibration model to interact with parameters, and not a digital control.

  Take care!

• How to add the phase parameter to array of waveform in the DaQmx continuous output example?

  Hi all

  I'm quite beginning to Labview. I just wanted to know how can I add stage information for the module of waveform existing as shown in the example of output Voltage-Continuous DaQmx.

  SEEE attached, I thought that the "output" is actually a built-in control, is there anyway I can add the phase as an additional parameter which?

  Thanks in advance for any help.

  Eric

  If you press ctrl + H, the context help window opens, and you can hover over the generating function VI to see its inputs/outputs, but also to navigate to the detailed help. As you can see from this screenshot, there is an exit for the phase which is separated from the output waveform.

• problem with the definition of a boolean as output parameter type

  Hi, I have a problem with the definition of type boolean as output parameter and it must return true if the query procedure retrieves one line else it shouuld return false

  Hi, I have a problem with the definition of type boolean as output parameter and it must return true if the query procedure retrieves one line else it shouuld return false

  And what are the issues? Its simple.

  SQL> create or replace procedure is_emp_exist
    2  (
    3     p_empno  in  emp.empno%type
    4   , p_result out boolean
    5  )
    6  as
    7     l_empno emp.empno%type;
    8  begin
    9     select empno into l_empno
   10       from emp
   11      where empno = p_empno;
   12
   13     p_result := true;
   14  exception
   15     when no_data_found then
   16        p_result := false;
   17  end;
   18  /
  
  Procedure created.
  
  SQL> declare
    2     l_result boolean;
    3  begin
    4     is_emp_exist (7788, l_result);
    5
    6     if l_result then
    7        dbms_output.put_line('Employee Exist');
    8     else
    9        dbms_output.put_line('Employee does not Exist');
   10     end if;
   11  end;
   12  /
  Employee Exist
  
  PL/SQL procedure successfully completed.
  
  SQL> declare
    2     l_result boolean;
    3  begin
    4     is_emp_exist (1000, l_result);
    5
    6     if l_result then
    7        dbms_output.put_line('Employee Exist');
    8     else
    9        dbms_output.put_line('Employee does not Exist');
   10     end if;
   11  end;
   12  /
  Employee does not Exist
  
  PL/SQL procedure successfully completed.
  
  SQL>