Restore the size of the image bitmap (image) and PPI

Similar Questions

• Cannot restore the image of the external drive

  I got a bolt of lightning and the factory hard drive needs to be replaced. I created a DVD boot disk and a current backup system on a USB external drive. Everything goes as planned; I boot on the DVD, Windows loads the files and the cranks Recovery Manager. I go through the guests to restore from system image, that I created earlier and the Manager believes the USB image. All is well until the system tries to install the image and then I get an error: failed to restore of system image. There is no drive that can be used to recover the system.

  The new drive is 500 GB, the old is 650 GB. Is the small size of disc the question?

  I caught a 1 to, a disc, which annoyingly I wants to go to the origin but rather picked up a 500 GB and the restoration seeks to advance. It has at least not out crapped on the date and is trying to restore the image to the new drive. With the fast error when restoring to the 500 GB drive, it seems the image was to remember the size of the partition and reluctant.

• Restore the Image on the screen by default start from Lenovo

  Just got my thinkpad yoga repaired at a repair shop, and I noticed that the image of the bios screen and windows screen image splasp has been changed.

  Is it possible to restore the images the factory ones?

  Fixed by restoring the bios default settings.

• Restore the Image of the camera target in VBAI

  I use Vision Builder AI 2012 with Smart camera NI1772C.  I can create target camera Image (Menu > target > create a target Image) but is it possible to restore the image on the camera?  The image is similar to PC save the image that can be safely stored and restored in case of emergency?

  Once you have created the image of the target, you can update any target of similar model with this image. VBAI launch and the start screen, select the target to update and do a right-click on the target and select "configure." On the last step of the configuration, you can navigate to the zip file that contains the image that you did to restore the target with all the image files.

  Hope that helps,

  Brad

• Try to restore the image of personal lost and family photo albums.

  Original title:

  i ' am try to restore the image personal all'my and wos det of the photo album of family in my computer crash computer library befor

  i ' am try to restore the image personal all'my and family album photos in my computer det disappered oumayma computer crash pleass such ' me how recavery

  Hello

  What operating system is installed on the computer?

  If you use Windows 7, then you can consult the following link:

  Previous versions of files: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/previous-versions-of-files-frequently-asked-questions

  Let us know the results!

• How to restore the image of the backup computer

  I backed up my computer any image not only files on my external hard drive. Then I wiped my computer back to my original configuration. I'm trying to restore the image of the entire back of the computer to my computer, I can't for some reason any. I know that I didn't lose my job, because they are large files (as I hope)
  When I did it was by control Panel to save, but when I went to restore does not give me steps to do.
  Thank you for your help

  Hello

  How to recover the backup complete pc

  To restore a full backup of the computer, you must proceed within the Windows recovery environment. To access the Windows recovery environment, you will need to insert your Vista DVD in the DVD drive on your computer and turn on your computer.

  http://www.bleepingcomputer.com/tutorials/tutorial144.html

  If you have problems, it's in here is a forum for microsoft specifically for backup issues

  http://social.technet.Microsoft.com/forums/en-us/WindowsBackup/threads

• Restore files after restoring the image using Windows backup

  Running W7 pro 64-bit. Had the problems of virus/malware, finally restored my discs from image system, dated 2 weeks ago and then restore backup files dated Windows from yesterday.

  When I go to save / restore my files, the update does not list a backup happened 2/14, the date of the restored image. When I go to manage Windows backup disk space, and then select backup period to remove the last date is 3/1, when I did the last backup. The date & time system is running with a date of 3/2.

  How can I fix it?

  Hello

  Thank you for visiting Microsoft Community.

  As I understood it, you experience the problem with changes to date during the restoration of files after restoring the image using Windows backup on the system.

  Certainly, I understand your concern.

  I suggest refer you to the articles below and check if that helps.

  Backup and restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows/back-up-restore-FAQ#1TC=Windows-7

  Restore files from a backup

  http://Windows.Microsoft.com/en-us/Windows/restore-files-backup#1TC=Windows-7

  Note: The article above will help you restore backed up version of the files that are lost, damaged, or changed accidentally. You can also restore files individual, groups of files, or all files that you have saved.

  Recovery and data backup

  https://msdn.Microsoft.com/en-us/library/bb727010.aspx?f=255&MSPPError=-2147217396

  I hope this information is useful.

  Please let us know if you need more help, we will be happy to help you.

  Thank you.

• In photoshop CS5 (bridge) I could select all the images and their size still before turning them into JPEG files. I can't find a way to do it in CC

  In photoshop CS5 (bridge) I could select all the images and their size still before turning them into JPEG files. I can't find a way to do it in CC

  Hi Tanuj.

  I actually understand it. Not the best user friendly system. Where as before (CS5), I just had to go to crop tool and choose the dimensions and the inches now it in the window. Just really complicated for nothing.

  Thanks anyway Tanuj

  Melanie

• How to restore the image to a different target?

  I have an image swap on click, which I do not, restore I want to make it clear which item has been selected if the user moves the pointer to their suite.  However, if the user clicks a different item, I then want to restore the image in the first.  How do I get there?  There are 8 separate clickable elements, and it is not a navigation bar.

  I took a few minutes and came up with an approximate example of coding using three images (actually 6):

  http://www.nedwebs.com/DW/imageswap.html

  If you right-click the page, you can select the option to view the source code.

  What I mainly did was review the tags to use onmouseup as indicator with a click on an image, which triggers the MM_swapImage() function that DW creates when you use their offer of integrated image reversal.  I've eliminated the function MM_swapImgRestore() and call that DW normally also creates. Function swapImage remains the same, with the exception of adding a line to call the function, I added.  The function I added, NM_restoreAllImages(), while it could be refined (becoming cryptic to try to read), is used to return images to their originals.

• How to set the text to the center of the image and keep it responsive

  Hi, I'm new in Muse so Hello everyone

  I created a large image and add the text object that I placed in the Center. I have setup the image and width sensitive.

  Keep what reduction in size of the sensitive image browser, but the text is now high position relative to the browser.

  My question is how do you tell the text object to hold the center of the image? (As rather pin to pin object browser)

  Thank you

  I found this one:

  Text the PIN in the center of the image when using fluid width

  He answered my question but not yet a reasonable solution. Muse should allow us to group objects even with width and high sensitive. Another way is to allow pin object to.

• How to set up the images and captions after the import of Word 2007

  I have three general issues (ID CS4):

  • I haveMagi are placed inside the text block. How could I place them in any other place easily? If I try with the holding of the left button of the mouse, which is not possible. I have to cut it and paste it again. What is this possible.
  • How to create captions for the images and tables? I get Word of text style with a description. Maybe I need to number the pictures and tables. The common question is: is it necessary to number of images and tables in the SW user manual? I've seen a lot of documentations and there were not counted. There are common rules, when it is necessary to dial it and when not? If yes how can I do such a legend in InDesign? I tried it and I am so far, I can do it in a separate text frame for counter with text. It is the only way?
  • Import of untied the size table and the table is placed off the page. I didn't understand why ID has not regained the same size in Word 2007

  Please see my file:
  http://www.FlashMedia.cz/temp/import_word_2007.indd

  I answered this question, and we had a lively discussion. Yes, you

  create a separate text for captions. You can use automatic

  numbers, or type numbers in itself. If you do not understand the

  words in the discussion, or if you need more "hand holding" Guide

  through, I suggest that you look for some tutorials online.

  -

• sequential reading of the image and plot greyscale

  Hi all

  I have attached a VI wrote in LV version 8.2. All I am trying to make bed image sequence from a specified location in the PC and get the value in pixels for those of all of the images and want to save it in a file. When I run the vi it says error - 1074395995 IMAQ read file not found.

  Any help would be appreciated.

  Hi Theresa,

  As Andrey says put the extension on the end and it works. for example, change:

  'C:\Documents and Settings\Administrator\Desktop\Modulation speckle depth for Malinowski to low frequency\2Hz2.8Vpk-pkRHOE\2Hz20001' to

  "C:\Documents and Settings\Administrator\Desktop\Modulation depth of speckle to Malinowski to low frequency\2Hz2.8Vpk-pkRHOE\2Hz20001.jpg.

  or any file format are your photos.

  Thank you

• When I make a video call, the image and sound frequently burst

  Original title: I.M video calls

  When I make a video call the image and audio break-up often so that the link falls down and I have to again open the link that can be very frustrating

  Hi geraldmallinder,

  1. What instant messaging program that you are using?

  2. were you able to make video calls before without any problem?

  3. you will remember to do recent changes on the computer before this problem?

  If you use Windows Live messenger, you can consult the following articles and check if that helps:

  Impossible to establish a webcam with Windows Live Messenger conversation

  Free chat: use instant messaging and webcam to stay in touch

  With the help of your LifeCam with Microsoft Live Messenger

  Hope this information is useful.

• Mac OS 10.6.8 - Photoshop CS5.1 after years of perfect use, suddenly I'm unable to select a layer by clicking on the image and select it in the layers palette.  Solve this problem for me and I'll buy you a new car.  With our thanks, David Heidelberge

  Mac OS 10.6.8 - Photoshop CS5.1

  After years of perfect use, suddenly I can't select a layer by clicking on the image and select it in the layers palette.

  Solve this problem for me and I'll buy you a new car.

  With our thanks, David Heidelberger

  Hi David

  Have you checked your settings to automatic selection in the upper left of the workspace?

  

• Since I loaded items 14 in my computer, the program stops working after having worked on the images and I try to save the processed images. This happens over and over again and I am very angry that this continues to happen. After working on an image

  Since I loaded items 14 in my computer, the program stops working after having worked on the images and I try to save the processed images. This happens over and over again and I am very angry that this continues to happen. After working on an image for 15-30 minutes I lose everything I did when the program stops working... This is extremely frustrating, as I can't use the program

  Hello... Adobe, you have a phone number I can call to talk about this?

  Why don't answer you my survey?

• Hi Ive had lightroom 6 installed for three months now when I export my image the watermark is not on the image and it know test expired above were he know lightroom on top

  I export my image the watermark is not on the image and it know test expired above were he says lightroom on top

  Please create a new watermark with a completely new police force and then check.

  To pause Lightroom Mobile, click on your name on the top left corner and that there should be a drop-down list, you will see the option to Pause.