Restore the SQL database

Similar Questions

• The upgrade to vCenter Server to vCenter Server 5.1 5.1 update 1 when the SQL database is remote and vCenter Server Heartbeat is installed

  Hi guys,.

  I'm in the middle of an upgrade to vSphere 5.1 5.1 vSphere update 1. I have vCenter protected by HB and SQL on a separate computer (also protected by HB) I also run Syslog, Update Manager and Proxy authentication on vCenter.

  I've successfully upgraded HB on all 4 nodes (2 x vCenter & 2 x SQL) and started the upgrade components on the secondary according to the •vCenter Server Heartbeat 6.5 server and vCenter Update 1 Installation on Windows Server 2008 when the secondary server is virtual (PDF) http://www.vmware.com/pdf/vcenter-server-heartbeat-65-u1-installation-windows-2008-virtual-guide.pdf

  I got to step 3.c

  3. change the primary/active server role:

  a launch of the vCenter Server Heartbeat wizard configure server and click the tab of the Machine to change the server role for the current server (primary) to the active State and click Finish.

  b using the Service Control Manager, start the Server Heartbeat of VMware vCenter service.

  c using the vCenter Server Heartbeat Console, check that all the status icons on the server: summary page are green indicating that the boot process is completed and protected from all the services are started.

  d using the Service Control Manager, stop the service Server Heartbeat of VMware vCenter.

  As the vCenter service does not start, I'm stuck at this point. As far as I'm concerned, the error is quite logical. I've updated vCenter using the secondary server, and then I'm trying to connect (according to the guide) with another version that breaks down.

  If I continue with the services stop and launch the installer SSO, it is trying to perform an uninstall!

  Did I miss something in this upgrade?

  Concerning

  
  Ciaran

  Hi guys, VMware have finally updated the documentation to reflect the right way forward: https://www.vmware.com/support/pubs/heartbeat_pubs.html U1 6.5 Select from the menu drop-down and you'll see the last date of update for each of the documentation is now 10/10/2013. The guide States now specifically to restore the vCenter database before proceeding with any other measure, this is copied below for convenience: "the upgrade of the main server of the upgrade process further guess upgrading the secondary server completed successfully. Procedure 1 before continuing the upgrade process, perform a restore of the database of vCenter Server, Single Sign-On database, VMware Update Manager database and SSL certificates that were backed up in step 4 on the secondary server. regards Ciaran

• VCenter V5 upgrade and the SQL database

  Hello

  I just read the whole procedure to upgrade the Vcenter server, but I can't find an answer to my question.

  I'm trying to upgrade Vcenter 4.1-5, the virtual machine is Win2008 64 SP2, is the database of VC on a VM Win2003 SP 2 with SQL 2005.

  This upgrade of SQL DB is supported?

  I have to upgrade my SQL VC DB to SQL 2008?

  Please let me know?

  I ran an upgrade and is not, I have not found the reason why and came back by restoring the DB VC and re install the Vcenter server.

  Thank you in advance.

  could be vCenter certificates or some other problem with vCenter, so it is difficult to say without seeing for myself.

  I would like to give VM Ware support a call...

• Administrator rights on the SQL database

  Hello
  I try to configure vFoglight 6.1 with an external SQL-database. To the point "vFoglight database Configuration" I have the problem, I have can´t to connect to the database. What I need to use an SQL account for the connection or is it possible to connect with windows authentication?

  vFoglight requires only access 'DBO' (the database owner). If you install vFoglight and select "configure DB later", it will create the necessary scripts to the installation of the database. Make sure that all scripts are run, then you can move the newspapers to any player. FYI: Make sure that the DB login ID and default database is set to the name of the database.

• Errors in the charge installing vcenter Server 5.5 with respect to the SQL database

  I do a new install of vCenter Server 5.5 on a new Windows 2008 R2 server. The database for this facility is pointing at a 32-bit Windows 2003 SP2 server. I installed SQL Native Client 10.0 on server vCenter Server 64-bit, and then I could make my DSN ODBC 64-bit connection. The vCenter Server install could very well recognize it, but after the installation got going he wrong on the database with the following error:

  Error 25003.Setup cannot create vCenter Server repository. The main reasons for this failure are:

  -The database is installed using insensitive case.

  -The database is remote and the client database version does not match the database version. If this problem continues to persist, see KB 1003960 for further assistance.

  Well, I know that the version of the client and the version of database do not match. SQL native client on the sql server is 9.00.5000.00 and the version on the server vCenter Server is 10.50.1600.1.

  I know that this version of vCenter is compatible with an installation of 32-bit sql server 2005 on a 32-bit server, 2003.

  I am not familiar too if they want upgrade me sql native client on the sql server, but is not compatible with the version of sql server on this server and there are several database for other applications on this server, so I don't want to jump into something like that.

  Any help would be greatly appreciated.

  Thank you.

  I install the native client SQL 2005 and give a shot.

• Control the use of grid and the SQL database setting through it

  Hi all
  I need documentation on the use of grid control to optimize the oracle, instance or SQL database. I'm working on oracle 10.2.0.4.0 and I control grid with me account. I want to know in detail on this.
  
  
  
  
  
  Thank you
  Rafi.

  http://www.Oracle.com/technology/documentation/OEM.html

  Concerning
  Asif Kabir

• Is it possible to send data to the SQL database?

  Is there a way to communicate with a SQL database? Quiz results, step etc.

  Yes, it is possible, that we are currently working on a plugin that will create a database for you and write your Captivate info.

• VCenter automatically restores the SQL DB connectivity after interruption?

  We run vCenter 4.1 on WIndows 2008 R2. vCenter uses a separate server running SQL2008 database.

  The database server recently had interview and restarted. I guess it was down for 5-10 minutes at most. After SQL server has been for some time, I was still unable to connect and was forced to restart the vCenter server to restore connectivity. This has happened both production vCenter (physical server) and the vCenter lab (VM). Both use the same external SQL Server.

  If it's normal, I'll just add a pre - req for the vCenter before DB updates, but wanted to check that others experience the same behavior.

  Hello.

  I'm following the same practice as Troy here.  I saw vCenter sometimes survive a reboot of the db and other times not.  For me, the incompatibility is unacceptable and I plan accordingly.

  Good luck!

• Cannot add the sql database 2008 to VCO

  My test connection string: jdbc:jtds:sqlserver://myservername.com:1433 / vco_logger

  I get the below error:

  The configuration ID must not be empty! (Name of the dynamic Script Module: addDatabase #8)

  Thank you

  -Stephen

  It worked for me.  VCO 5.5.1 SQL Plugin

  JDBC:jTDS:SQLServer://server.com:1433 / vco_logger; instance = MyInstance; Domain = Domain.com; useNTLMv2 = true;

• Connect to the SQL database on the internet using PHP script.

  Is this the same way as on regular Flash or on AIR I should do otherwise?

  If you have ActionScript code that could successfully connect to your PHP script on the server, the same thing works in the AIR also.

• Capture the results of the Quiz to the SQL database

  We build our own custom around Captivate solution. We would like to be able to capture generated by Captivate quiz scores. Where are sent the results? What should we do to get the results sent? I tried to fill in the PENS with our test URL section, but no data came in. Any ideas?

  OK guys! Here is my (very easy) solution:

  All I wanted to do is get the quiz results in my ASP.net (.aspx) page using the POST method.

  I produced a quiz and in the parameters stated that results must be sent by e-mail. Then I edited the file .htm with following changes to the sendMail() function:

  Instead of:
  document.emailForm.action = "mailto:" + gstrEmailTo + '? subject = "+ gstrEmailSubject;

  Change to:
  document.emailForm.action = ' http://YourURL/YourPage.aspx';

  Just after this line, insert the following code:
  document.emailForm.method = 'post';

  Get rid of the 'enctype' attribute in the

  element. In other words, instead of:
  

  you want to:
  

  It's as simple as that.

  Enjoy!

• Inserting data in the form SQL database

  I'm sure this question has been asked before, but during my research, I couldn't find an answer.
  
  I have a field of file download a form where users can download a separator: excel file, which is inserted into the SQL tab. This method works correctly. In the same form, I have a couple of text entry boxes in which I want the data that the user entered to be inserted in every row in the database SQL - in conjunction with the excel data entries. I hope I explained this correctly. Let me give a Visual. Here are the fields of the form:
  
  FILE LOCATION: [] Browse...
  [TAIL:]
  [INSTALLATION:]
  [DOWNLOAD DATE:]
  [ENTRY DATE:]
  
  The user has access to their file and inserts the rest of form fields. In the background, Coldfusion downloads the file and it then inserts into the SQL database. I need to take the rest of the data entered by the user (TAIL, INSTALLATION, DOWNLOAD DATE, DATE of ENTRY) and add/update on the same lines as the data of the file upload (excel sheet).
  
  I am sure that this would imply a sort of < cfloop >, but not quite sure how to code correctly. Please notify.

  Found the solution. I have a will insert my excel data in a line at a time. I went ahead and added the 4 forms of the insert fields and it looped through each line while adding the values in the form. Thanks for your help anyway Westside, much appreciated.

• Restore the database to the previous SNA

  Thank you for taking my qustions?
  
  
  I have a situation where I'm going to string together several jobs very long. If something goes wrong I want to restore the database to a specific number of SNA. I do not have the return of flame cutting, because I want things to run as fast as possible.
  
  If I should have to restore the database because a job fails, do I restore the database from a backup?
  
  Could I just restore the backup control file and then run rman > recover database until the SNA = 122222222; If Yes, how Rman knows what archivelogs to restore and what happens if SNA has not been archived yet?
  
  Thank you
  Kathie
  
  11.1.0.7 windows 2008.

  Hi koko.

  You must restore the full database back and go for an incomplete recovery using backup controlfile.
  Because it is not possible to restore the data files SNA number.

  Anil

• How to back up and restore the unit VCO (Postgres)

  Hello

  Is there an official KB on how to back up and restore the VCO device using the Postgres?  How similar to save the VCSA (http://kb.vmware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 2034505)

  Thank you

  WARNING: what follows is not a KB official and is totally not supported! Use it at your own risk!

  Backing up/restoring the Postgres database in vCO device 5.1 is similar to the backup/restore of VCSA as described in the article above, with the following differences:

  • location of the database->/var/lib/pgsql/data
  • EMB_DB_INSTANCE,EMB_DB_USER, EMB_DB_PASSWORD-> take a look at the /opt/vmo/appliance/dbd/create_db.sql file

  Hope this helps,

  Ilian

• sql database problem waterfalls

  Hello

  I use the cascades sql database! I am able to run the sql query, create tables and data screwed into it!

  But I am unable to read the sql database! Please help me!

  It's my code,

  SqlDataAccess sda (home.absoluteFilePath ("mydeb.db"));

  QVariant list = sda.execute ("SELECT * FROM MaTable");

  But I don't know how to recover data from this QVariant!

  Please help me...

  The result of function execute() is actually a QVariantMapList wrapped in a QVariant. (QVariantMapList is a TypeDef to see). To get your result set, you must cast to a QVariantList, gives you your lines, then extracts the columns of the QVariant map. Lets say you want to get the value of an INTEGER column called 'my_int_col' in the first row of the result set. Do it like this:

  int myInt;
  QString query = "SELECT * FROM mytable;";
  
  QVariant result = this->db->execute( query );
  if ( !this->db->hasError() ) {
      myInt = result.value()[0].value()["my_int_col"].value();
  } else {
      DataAccessError err = this->db->error();
      qCritical() << "SQLite Error -" << query << "-" << err.errorMessage();
  }
  

  Note that you must climb the QVariant column obtained from QVariantMap ().valueint line. Obviously, the cast that make you must match the data type of the column that you collect. Access to the other lines in the game by changing the [0] properly. Find out how many rows were returned with result.value(). count().