Administrator rights on the SQL database

Similar Questions

• How to give administrative rights for the domain users (user is outside organization).

  Hello

  How to give administrative rights for the domain users (user is outside organization).

  If the employee works in the company of xxxx but it supports the client project and is located on the place of the customer, but it does not use the client computer and not on the client domain as well, but the employee is in the company of xxxx must be given administrative rights to the computer. can someone help me on this ASAP.

  Thank you

  MURUGESAN Rudy,

  This issue is beyond the scope of this site and to make sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home
  http://social.msdn.Microsoft.com/forums/en-us/home

• The upgrade to vCenter Server to vCenter Server 5.1 5.1 update 1 when the SQL database is remote and vCenter Server Heartbeat is installed

  Hi guys,.

  I'm in the middle of an upgrade to vSphere 5.1 5.1 vSphere update 1. I have vCenter protected by HB and SQL on a separate computer (also protected by HB) I also run Syslog, Update Manager and Proxy authentication on vCenter.

  I've successfully upgraded HB on all 4 nodes (2 x vCenter & 2 x SQL) and started the upgrade components on the secondary according to the •vCenter Server Heartbeat 6.5 server and vCenter Update 1 Installation on Windows Server 2008 when the secondary server is virtual (PDF) http://www.vmware.com/pdf/vcenter-server-heartbeat-65-u1-installation-windows-2008-virtual-guide.pdf

  I got to step 3.c

  3. change the primary/active server role:

  a launch of the vCenter Server Heartbeat wizard configure server and click the tab of the Machine to change the server role for the current server (primary) to the active State and click Finish.

  b using the Service Control Manager, start the Server Heartbeat of VMware vCenter service.

  c using the vCenter Server Heartbeat Console, check that all the status icons on the server: summary page are green indicating that the boot process is completed and protected from all the services are started.

  d using the Service Control Manager, stop the service Server Heartbeat of VMware vCenter.

  As the vCenter service does not start, I'm stuck at this point. As far as I'm concerned, the error is quite logical. I've updated vCenter using the secondary server, and then I'm trying to connect (according to the guide) with another version that breaks down.

  If I continue with the services stop and launch the installer SSO, it is trying to perform an uninstall!

  Did I miss something in this upgrade?

  Concerning

  
  Ciaran

  Hi guys, VMware have finally updated the documentation to reflect the right way forward: https://www.vmware.com/support/pubs/heartbeat_pubs.html U1 6.5 Select from the menu drop-down and you'll see the last date of update for each of the documentation is now 10/10/2013. The guide States now specifically to restore the vCenter database before proceeding with any other measure, this is copied below for convenience: "the upgrade of the main server of the upgrade process further guess upgrading the secondary server completed successfully. Procedure 1 before continuing the upgrade process, perform a restore of the database of vCenter Server, Single Sign-On database, VMware Update Manager database and SSL certificates that were backed up in step 4 on the secondary server. regards Ciaran

• Need administrator rights for the Intel on Satellite Pro 2100 speed step

  Hello
  I have a Satellite PRO 2100 (Pentium 4 1.9 GHz).
  I have a problem with the function of the Intel speed step, which reduces the speed of the processor at 1.2 GHz. But I have a problem: I can do this, if I use an administrator account...
  After starting, if I connect with a simple user account, the Intel speed step works... and the speed of the cpu remains at 1.9 GHz.
  So I would like to use this function with a simple user account, how do I do it please?

  Thanks for your help :)

  Hello

  As far as I know that this application is not shipped with the image of Toshiba and it s not made not part of the image.
  But I put t see any big problems. You will need to change your account administrator rights. In this case, you will need to ask someone the admin right to edit your account.

  The other possibility is to change the law for this software. There can be changes as by admin. What you can change in the Security tab in the program properties. Full control must be set to all.

  Then, it should be possible to use this application with your account.

• How to deepen the administrator rights on the computer?

  Original title: a little URGENT please - Windows 8 lost administrator rights

  Here's the question.

  I have an Asus all in one type of windows desktop PC 8. I improved this standard to professional.
  There is a local user account, who somehow lost administration rights. This is obviously a problem, because I can not access several functions of the computer, including a critical application of the work.
  There is no other user accounts on the pc to connect to the standard administrator account that I suppose is disable by default? As I don't see it.
  After some googling, I tried a few methods to solve this, nothing helps. It seems im in a catch 22, as to solve the problem of having admin rights, I need to have administrator rights to perform the majority of bugs!
  Tried to start the safe mode, to re - activate administrator privileges by pressing F8 or SHIFT F8
  -no effect - pc just started normally
  Tried to activate the account administrator "cmd".
  -This must be done by run cmd as administrator, which I'm not currently!
  Tried to add mode without fail to the startup list
  -Need to be administrator to do!
  I don't see any method to restore or recover to previous point
  Impossible to reinstall windows as it came pre-installed with windows. I was about to add the computer to a domain so that I could make a clean image before this problem occurred
  Uh, I forgot what I tried now. pulling my hair out over this. Seems nothing more I need to do, I have access to an administrator account to run needs. If I could get in safe mode somehow that seems like it would allow me to solve this problem, but I can't get into that any means.
  Help, please! It is a working pc and the only app that gets used, requires administrator privileges to run. If his critics I solve this problem
  Thank you!
  Hi, I know I'm a little late to the party, but I found this post faced a similar problem and thought that post my findings.
  I found a work around for this problem, which does not require a reinstall of Windows, but you may lose your user account.
  Summary:
  The problem is that in Windows 8, the administrator is inactive by default, you will have to find a way to activate it. You can activate the admin as an admin account, however. Fortunately, (on my machine anyway) it seems that you can access your hidden from the Safemode administrator account. If your first set of objectives will be as follows:
  -starting in safe mode
  -Log in as an administrator
  -l' administrator, enable the account administrator similarly.
  -Restart your machine and you as an administrator outside of safe mode (normal mode).
  From here, you should be free to do what you want. Now that the admin account is active, you are allowed to type a password when prompted (by default that the password is empty). For me, however, when I tried to promote my previous user administrator account (among other things) I noticed symptoms that seem to indicate that the account ceased to exist. I went through measures to set up a new account and get it synced with my microsoft email account.
  -Create a new user account
  -give administrator rights
  -remove my old (for some reason, hidden) account
  -Sync to the top of my new user account with microsoft e-mail account.
  Directions for use:
  How to get admin access:
  (1.) start in safe mode. You can make it easier by opening a command prompt (Start menu-> type "cmd"). And type "shutdown/r/o".
  2.), your computer begins to restart, but give you a set of troubleshooting options. Choose troubleshooting->-> start of the Advanced Options settings.
  3.) after reboot and enter safe mode, users of contactor by going to the start menu-> click on your user name-> and choose administrator.
  4.) Windows will begin the first initialization for this account.
  5.) once connected, open the command prompt, this time as a Director. (Make a right click-> Run as administrator).
  6.) type "net user administrator / Active: Yes" to set the admin account as 'active'. It will now be shown outside of safe mode.
  7.) restart your computer and log in as administrator again. You can now add users and to play with the permissions etc. (metro options are not available in safe mode, where the reset).
  How to remove your old account of 'lost' and synchronize your new account with the microsoft account.
  1.) create a new account via the control panel users. Don't forget to give you administrator rights.
  (2.) to remove your lost old account by typing "net use /del" in an administrator command prompt. You need to know your old account name, good luck with this one.
  3.) go into the settings of your pc: open the context menu on the right-> settings-> "change PC settings."
  (4.) to go to the users-> Select 'switch to a Microsoft account» tab
  I hope this helps!

• Errors in the charge installing vcenter Server 5.5 with respect to the SQL database

  I do a new install of vCenter Server 5.5 on a new Windows 2008 R2 server. The database for this facility is pointing at a 32-bit Windows 2003 SP2 server. I installed SQL Native Client 10.0 on server vCenter Server 64-bit, and then I could make my DSN ODBC 64-bit connection. The vCenter Server install could very well recognize it, but after the installation got going he wrong on the database with the following error:

  Error 25003.Setup cannot create vCenter Server repository. The main reasons for this failure are:

  -The database is installed using insensitive case.

  -The database is remote and the client database version does not match the database version. If this problem continues to persist, see KB 1003960 for further assistance.

  Well, I know that the version of the client and the version of database do not match. SQL native client on the sql server is 9.00.5000.00 and the version on the server vCenter Server is 10.50.1600.1.

  I know that this version of vCenter is compatible with an installation of 32-bit sql server 2005 on a 32-bit server, 2003.

  I am not familiar too if they want upgrade me sql native client on the sql server, but is not compatible with the version of sql server on this server and there are several database for other applications on this server, so I don't want to jump into something like that.

  Any help would be greatly appreciated.

  Thank you.

  I install the native client SQL 2005 and give a shot.

• Restore the SQL database

  Hi All-
  
  I installed 11.1.2 on SQL server 2008. There is a requirement where we want to reinstall SQL server 2008. We had a return to the top of all the existing databases that we can restore once it is reinstalled. Do we need
  
  something special for the Hyperion database we have on SQL & installtion would work as it is after we have restored the database or it will reconfigure again.
  
  Please advise!
  
  Thank you!

  If the account details, host name and instance for SQL server will remain the same so all you will need a backup of databases and then, you can simply restore.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Control the use of grid and the SQL database setting through it

  Hi all
  I need documentation on the use of grid control to optimize the oracle, instance or SQL database. I'm working on oracle 10.2.0.4.0 and I control grid with me account. I want to know in detail on this.
  
  
  
  
  
  Thank you
  Rafi.

  http://www.Oracle.com/technology/documentation/OEM.html

  Concerning
  Asif Kabir

• Is it possible to send data to the SQL database?

  Is there a way to communicate with a SQL database? Quiz results, step etc.

  Yes, it is possible, that we are currently working on a plugin that will create a database for you and write your Captivate info.

• Satellite M70 - how to assign administrative rights for the user account under Win XP

  I have a Toshiba SatM70 using Windows XP, don't know how but I lost administrator access and using a regular limited account.

  I can't seem to get back to be the administrator and must because my anti virus protection picked something, but I can't fix because I get a message saying you are not logged in as administrator.

  Can someone help me to find out how to return to be the administrator please? Thanks in advance.

  Lesley Ann.

  Hello

  Please check if you can change user account.

  Go to control panel-> user control accounts-> click on user account you-> change the type of account-> admin rights

  Good bye

• VCenter V5 upgrade and the SQL database

  Hello

  I just read the whole procedure to upgrade the Vcenter server, but I can't find an answer to my question.

  I'm trying to upgrade Vcenter 4.1-5, the virtual machine is Win2008 64 SP2, is the database of VC on a VM Win2003 SP 2 with SQL 2005.

  This upgrade of SQL DB is supported?

  I have to upgrade my SQL VC DB to SQL 2008?

  Please let me know?

  I ran an upgrade and is not, I have not found the reason why and came back by restoring the DB VC and re install the Vcenter server.

  Thank you in advance.

  could be vCenter certificates or some other problem with vCenter, so it is difficult to say without seeing for myself.

  I would like to give VM Ware support a call...

• Administrator rights to the ACS using Active Directory groups

  Good afternoon

  We must be able to use administrative accounts for our device ACS who reside in an Active Directory group, if possible.  If this is not possible, what other safer options would we be able to use (RADIUS authentication or authentication RSA 2)?

  Thanks in advance

  You can only use the locally stored accounts within the ACS.

• Cannot add the sql database 2008 to VCO

  My test connection string: jdbc:jtds:sqlserver://myservername.com:1433 / vco_logger

  I get the below error:

  The configuration ID must not be empty! (Name of the dynamic Script Module: addDatabase #8)

  Thank you

  -Stephen

  It worked for me.  VCO 5.5.1 SQL Plugin

  JDBC:jTDS:SQLServer://server.com:1433 / vco_logger; instance = MyInstance; Domain = Domain.com; useNTLMv2 = true;

• Connect to the SQL database on the internet using PHP script.

  Is this the same way as on regular Flash or on AIR I should do otherwise?

  If you have ActionScript code that could successfully connect to your PHP script on the server, the same thing works in the AIR also.

• Capture the results of the Quiz to the SQL database

  We build our own custom around Captivate solution. We would like to be able to capture generated by Captivate quiz scores. Where are sent the results? What should we do to get the results sent? I tried to fill in the PENS with our test URL section, but no data came in. Any ideas?

  OK guys! Here is my (very easy) solution:

  All I wanted to do is get the quiz results in my ASP.net (.aspx) page using the POST method.

  I produced a quiz and in the parameters stated that results must be sent by e-mail. Then I edited the file .htm with following changes to the sendMail() function:

  Instead of:
  document.emailForm.action = "mailto:" + gstrEmailTo + '? subject = "+ gstrEmailSubject;

  Change to:
  document.emailForm.action = ' http://YourURL/YourPage.aspx';

  Just after this line, insert the following code:
  document.emailForm.method = 'post';

  Get rid of the 'enctype' attribute in the

  element. In other words, instead of:
  

  you want to:
  

  It's as simple as that.

  Enjoy!