Restore the system to factory settings

Similar Questions

• Z220 CMT Workstation: restore the system to factory settings.

  Model: Hp Z220 CMT Workstation
  OS: Windows 7 Professional
  
  I'm trying to restore my computer to factory settings. I pressed ESC several times at the start to the top of the computer. Select the system restore, but the computer just hoot to Windows form. I can not connect to windows, because as some error loading windows.
  
  Is there another way for me to restore the system to factory with a clean Windows 7?

  > is there a way for me to get the recovery disk?

  Two ways:

  1. in Windows system work, running the same version (32-bit? 64-bit?), you can burn a disc of "recovery."

  2. find a friend with a 'detail' in the Windows 7 operating system DVD (remember this is the same 32-bit or 64-bit, your system) and borrow the DVD of him/her, or get him or her to burn a copy of it.

• I changed my apple ID and password user name and it changed on 3 of my devices. I have a 4th device, which still has the old user name and password and I am not able to change it. I can't restore the phone to factory settings unless I can connect.

  I changed my apple ID user name and password on 3 of my devices. I have a 4th device, which still has the old user name and password and I am not able to change it. I can't restore the phone to factory settings unless I can connect.

  OK, just to clarify: you always use the same Apple ID, but you changed its name, correct?

  If this is the case, you can go to iCloud.com or use find my iPhone app (free on the App Store) of one of your devices to remove the 4th icloud.

• Is there a way to restore the system to factory setting

  Original title: Reinstalling windows

  I would like to restore or reinstall the system on my computer because my computer appears to be infected with the virus and there are a lot of problem with the system as impossible to install net framework. I have never create any point before restoration, and the recovery of the manufacturing company (Acer) tool does not work for reasons unknown. I would like to know if there is a way to restore the system to factory setting. And also, if I have the windows 7 key product that comes with this computer (I think that its probably an OEM product key), what I have to buy a new key of product if I reinstall windows 7 on this computer?

  Thank you for your reply,

  However, I tried with the Acer eRecovery Management and there are two problems:

  • I open Acer eRecovery than Management with System Manager. When I click on restore or create Factory default disc, it says please wait and there is an infinite loading.
  • Also, when I use Alt + F10 to open, it says please complete operating system configuration process.

  Scores of recovery and/or access to them can get damaged.

  As the partition recovery is photographed on the hard drive by Acer in the manufacture of your machine, we have nothing to do with changing/fixing this recovery process once there are problems with it.

  As you have a preinstalled OEM license (Acer, Dell, HP, etc.), contact the manufacturer of your computer to order recovery media that they need to provide for a fee.

  Or you can also borrow the same exact retail edition DVD of Windows 7 and use your product key to reinstall.

  But Acer does not normally keep recovery disks for you to buy for older operating systems, so it comes down to borrow the exact same edition of Windows 7 DVD to a friend, etc. and by using the product key on the COA sticker on your machine.

  This is what looks like a sticker of COS:

  

  @@@@@@@@@@@@@@@@@@@@@@@@@@

  Your other option to continue to use the machine is to remove malicious programs that infect your machine:

  See if this helps you:

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware and if necessary do in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  'Advanced options boot (including safe mode).

  http://Windows.Microsoft.com/en-us/Windows/Advanced-startup-options-including-safe-mode#1TC=Windows-7

  _______________________________________

  And also scan with the free version of SUPERAntiSpyware

  http://www.SUPERAntiSpyware.com/download.html

  SUPERAntiSpyware Free Edition is 100% free and will detect and remove thousands of Spyware, Adware, Malware, Trojans, KeyLoggers, Dialers, Hi-Jackers, and worms. SUPERAntiSpyware features many unique and powerful technologies and removes spyware threats that other applications fail to remove.

  SUPERAntiSpyware Free Edition does not include blocking in real time or scheduled scan.

  ______________________________________

  It is a very good program to scan your system to remove adware, etc.:

  http://www.bleepingcomputer.com/download/adwcleaner/

  AdwCleaner is a program that finds and removes the Adware, toolbars, potentially unwanted programs (PUP) and browser hijackers from your computer.  Using AdwCleaner you can easily more of these types of programs for a better user experience on your computer delete and while browsing the web.

  _____________________________________

  And just to be sure, nothing is lurking in the background:

  'TDSSKiller Rootkit Removal Utility download for free'

  http://USA.Kaspersky.com/downloads/TDSSKiller

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Once you are sure that the malware is removed, check the system files.

  The problem can happen however is that if SFC is install system files that are corrupted, you may still borrow this disc of windows 7 to solve this problem by performing a repair upgrade.

  "How to use the System File Checker tool to fix the files on system missing or corrupted on Windows Vista or Windows 7"

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  See you soon.

• How to restore the computer to factory settings?

  I want to restore my computer back factory settings im tp do not know how to do that please inform me on what I do you solved the problem

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/default.aspx/KB/326246

  'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

  See you soon.

  Mick Murphy - Microsoft partner

• I have restored the laptop to factory settings, the product key sticker is faded... While the re-activation of it Microsoft office said "this is not a valid product key Office...". »

  I bought my laptop with microsoft office 2010 is installed. I restored my laptop to factory settings, the product key sticker is faded so I used jellybean keyfinder to get it. While the re-activation of it Microsoft office said "this is not a valid product key Office...". »

  What should I do to make it work again?

  Please note that if you use the Windows 7 product key located on the certificate of authenticity attached to your system label, this will not work, it is only for Windows 7. You need a product key Office 2010. Also using the value default key OEM SLP for Windows 7 does not work with Office 2010

  If your computer comes with a trial version of Office, you need to get a trial key or buy a full license:

  Trial license:

  http://Office.Microsoft.com/en-us/try/

  Full license:

  http://support.Microsoft.com/kb/823570

  Get the key;

  http://Office.Microsoft.com/en-us/buy/redir/XT101874326.aspx?CTT=5&origin=HA101847520

  If you purchased Office 2010 and get no valid product key error to refer the article mentioned below:

  http://support.Microsoft.com/kb/2002262

  Frequently asked questions about Office Activation Wizard and about features in Office 2010 and Office 2007 programs view programs

  http://support.Microsoft.com/kb/927921

  Error message when you start an Office application after installing a suite Office: "invalid product key".

  http://support.Microsoft.com/kb/836178

  If you have a trial version of Office 2010 that came with your computer, try to uninstall it first:

  Run the patch tool mentioned in the article below to uninstall Office 2010:

  http://support.Microsoft.com/kb/290301

  Download a trial version of Office 2010 that corresponds with the edition that you purchased and convert it to a version full:

  Trial license:

  http://Office.Microsoft.com/en-us/try/

  See the link on how to convert a trial version of a suite full Office 2010 or program to a commercial version: -.

  http://Office.Microsoft.com/en-us/project-help/convert-a-trial-version-of-an-Office-2010-suite-or-program-to-a-full-retail-version-HA101886436.aspx

  http://Office.Microsoft.com/en-us/buy/convert-your-trial-to-a-full-product-version-HA101812668.aspx?CTT=1

• How can I restore my system to factory settings, after replacing the hard drive?

  Original title: I have a hard nine; how I can start or put in the back of the recovery disc to my old sistem all gane

  I need help to start the recovery disc, in all new hard drive, in order to restore my system whole back

  Hello

  You can boot from the DVD drive with the recovery disk and then follow the manufacturers installation instructions

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

• Restore the computer to factory settings

  Hello. How to restore my Vaio (Model PCG - 71318L) computer to the factory settings. I don't want to do a system restore to a point in time. I want to restore it to factory settings.

  To reinstall windows using the advanced recovery it says I need a 'windows install disc", but the computer did not come with one. How to create a "windows install disc." How this disc is distinguished by the "system repair disc.

  If I create a "system repair disc" I'll be able to use it as a 'Windows install disc"when I reinstall windows.

  Is reinstall windows identical to restore to factory settings? If this is not the case, how it restore to factory settings?

  My OS is Windows 7 Home Premium

  Thank you and best regards

  Hello
  Welcome to the Forums of Discussion of the user.
  PCG - 71318 is a chassis number for all VPC-EB-series laptops
  to find your number of exact model please consult this guide here: http://esupport.sony.com/US/p/support-i... 4 #notebook

  your laptop EB series has a hidden partition, to access with the computer turned off simply press the [help] button, it should turn on the computer and start the backup partition.

  If it does not turn on the computer and the key to tap the [F10] a few times to the VAIO logo
  a screen indicating "Edit Boot Options"
  Just press enter and launch the tools

  Once the load of tools choose "C Drive Recovery" and all will be wiped clean back to the original factory image. You can even use data backup to backup all your files before you begin the Format.

  Once the device is returned to the original image once you're at the level of the windows desktop, press [help] to open VAIO Care and create a set of recovery software. all you need are 2 blank DVDs

• The intention to restore the computer to factory settings. How can I get Win10 again?

  I have an emachine at less than ten years now. Originally it had installed Win7 on it and last year I got the free update of Win10. No problem downloading or installation, have no problem with it, but this poor old clunky machine is to his last breath. I want to do a "restore to factory settings. I know it will destroy everything, and I guess he'll reinstall Win7, after which I would download and re - install Win10 just like I did before.

  Can I do this?

  Should I have my registration key of Win10?

  Where would he get this information?

  Win10 is still available as a free download/install as if it were last year?

  I don't want to restore on Win7 to see that now I have to buy the Win10 I'm currently using for free, I want to know ahead what to expect and what will be expected of me until I push the button.

  Yes, I know, I need a new computer, but it is not the budget for it right now. It's why I can't really afford to buy Win10 if I don't have one.

  Thank you

  JaeMmb

  Yes, you can.

  Format your system and install Windows 7 and turn it on.

  After coming to start windows update and when your windows 7 updated, it will automatically give you 10 free update Windows.

  But the upgrade of your system before July 29, 2016 because after that, you will only get the free update.

• Desktop PC: how to restore my system to factory settings

  I need to restore my PC to the original factory settings, how do I do this?

  Thank you

  Bill

  HP Recovery Manager can be accessd in the Start Menu or by pressing the F11 key immediately after switch on/off the PC. Recovery Manager is used to reinstall specs_also of plant used to manufacture the defined recovery disk.

  HP has documents explaining the process for... Vista, Windows 7, Windows 8 and Windows 10 found here:

  http://support.HP.com/us-en/document/c00006110

• Laptop: how to restore my system to factory settings

  I need to restore my PC to the original factory settings, how do I do this?

  Thank you

  Bill

  HP Recovery Manager can be accessd in the Start Menu or by pressing the F11 key immediately after turning off the computer. Recovery Manager is used to reinstall specs_also to factory used to make recovery media.

  HP has documents explaining the process for... Vista, Windows 7, Windows 8 and Windows 10 found here:

  http://support.HP.com/us-en/document/c00006110

• Unable to get Yahoo as homepage favorite in the Windows XP-based computer after you restore the computer to factory settings.

  Original title: setting up old user account.

  need help please, I use wndows xp service pack 3. This pc is shared with my wife as an account administrator. I come back from pc to the factory settings and all is ok for my account, send everything etc, but on his account, I am unable to get yahoo bt homepage favorite, I am able to do, it's dell page. any help would be appreciated.

  Thank you very much

  Pete

  Hi Pete,.

  1. you receive an error message when you try to change the homepage of Yahoo?

  2. what browser do you use?

  If you use Internet Explorer 7, you can follow this link & check if the problem persists.

  You can't change the home page in Internet Explorer 7

  
  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in Windows.

  Hope the helps of information.
  Please post back and we do know.

• Pavilion DV6-3000 series - is unable to restore the system to factory State

  Hello

  Could you please help me with Factory System Recovery.

  I think I accidentally erased one of the three local disks (about 2 GB) with HP tools.

  Then when I used the HP System Recovery tool, the system told me that he did not find the files necessary for HP Recovery tool and offered me uses the compact disc of recovery with this tool. But I do not have this disc.

  Please provide me with instructions and files to the recovery of the factory system.

  Model: dv6 - 3082sr with Windows 7 x 64

  Thank you

  Alexander

  Hi Alexander,.

  There are two options available.

  1. you can order a set of replacement recovery disks using the link below - it will reinstall the operating system, all the drivers, and almost all of the original software (the exception being often tests of MS Office).  They will also recreate all of the original scores, including the recovery Partition.

  Order HP recovery disks.

  2 another option that you might consider is to create your own Windows 7 installation disc.

  Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

  An example of a COA label can be seen here.

  Also, if possible, back up the folder swsetup which lie at the root of the C drive.

  You can create a Windows 7 installation disc yourself using another PC - just download the good Disk Image ( this must be the same version that originally came with your laptop - it is listed as Windows 7 Home Premium 64 - bit ) from the link below and use an app like ImgBurn ( Note: you can deselect additional software during installation of ImgBurn offerings) to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write that an ISO on a disc is here.  The source of the Windows Image is Digital River.

  Windows 7 sp1-iso-official-32-bit-and-64-bit

  Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  Regarding the drivers etc, you must, if you were able to save the swsetup this will contain all the software installers and drivers for your laptop - if you were not able, drivers and software, you may need can be found here.

  Best regards

  DP - K

• I can't restore the laptop to factory settings

  Hi guys, I recently received a large number of viruses on my Toshiba laptop and I pretty much cant get on the desktop because of it, so I decided to repair my laptop via records, but when I get this day with him, it gives me this error message
  "the file nvrd32.sys is not found."

  I did a lot of research on googled around and haven't found a solution so im posting this thread.

  I have a Nvidia Quadro GFX card if that counts for anything.

  I have 2 drives labeled "Drivers" and "XP SP2". I get SP2 on the laptop and I still get the same message, can someone help out me?

  Don't know what's this file, it could be a virus trying to spread.

  When Windows is virus and the operating system is damaged, it will never be the same.

  So your best option would be to recover your data and run the recovery of your recovery disks to restore Windows back to its factory condition.

  If you need a good tool to scan of viruses and spyware, install Avira and Spybot. (plus they are free!)

• DELL INSPIRON 8200 - how to: run the system recovery to restore the system to factory

  I bought this laptop of another person, my problems with it are that I can not make changes to everything that I need to do a full system restor, otherwise, how can I, with the password not knowing does not, I thought you coould reset

  It seems that you want to perform a clean installation. According to this mode of

  http://support.Dell.com/support/eDOCS/systems/ins8200/en/1H018bk3.PDF

  ... it is assumed that you have a Dell brand XP reinstallation CD. If so, simply follow the instructions in the maual (count p. 99). If you want something more detailed, try one of these links:

  http://www.michaelstevenstech.com/cleanxpinstall.html

  http://www.WindowsXPHome.WindowsReinstall.com/indexreinstallguides.htm

  The second is for XP home. If you have SP2 or SP3, this is for you:

  http://www.WindowsXPHome.WindowsReinstall.com/sp2sp3installxpcdoldhdd/indexfullpage.htm

  No service pack or SP1:

  http://www.WindowsXPHome.WindowsReinstall.com/installxpcdoldhdd/indexfullpage.htm

  Advice: Ignore the ads and scroll down to part 1.

  Also, some Dells (not sure of your) contain a hidden recovery which are accessible by pressing Ctrl + F11 partition before Windows has the ability to load. If you do not have the correct CD, after return.