Unable to get Yahoo as homepage favorite in the Windows XP-based computer after you restore the computer to factory settings.

Similar Questions

• Client DHCP is unable to get a valid IP address from the DHCP server.

  Client DHCP is unable to get a valid IP address from the DHCP server. I have a home edition of Windows XP attempts to connect to my router wirelessly with wireless or wired connection but I get an error in Event Viewer with the discription DHCP 1007 error message. From what I researched, I discovered that the DHCP service depends on the AFD, TCP/IP and NetBT services. All these services are correctly place and worked very well (even the DHCP service is running without error) but every time I try to release/renew my IP address I receive than DHCP warning in the case where the viewer and I just cannot get a valid IP address of the server (router) I also have one of these verizon wireless G3 usb adapters and it works fine. I also have a good ping back when I try to do a ping localhost (for the closure) I also tried the preinstallation of uninstalled drivers from the adapter/s and nothing works. The only entrees in the registry for DHCP error are also AFD, NetBT and TCP/IP nothing else there, also all the files in the/system32/drivers afd.sys netbt.sys and tcpip.sys in addition to solve the problem, I'll mention that I installed and reinstalled Northon earlier, I do not remember if the problem appears before or after that. I receive also any error or warning in the security log or at least I don't know how to read: P

  Thanks in advance

  Thanks for the information.

  I hope you know that it is risky to connect the laptop to the Internet with no firewall and no antivirus... If this laptop is already connected to the Internet in this State, he is perhaps already infected.

  You said you know the router works because the other computers can connect successfully to it.  You should check the configuration of the router to make sure that it is not configured to limit the number of IP address it supplies, and (b) it is not configured to filter users by MAC address.

  When this laptop is connected by Ethernet, even if he gets the IP address of 169.254.x.y, can you ping the router?  Find the IP address of the router on any computer connected to it by running the ipconfig command in a command prompt window.  The "default gateway" is the IP address of the router.  Run the ping command in the command prompt window as well.

  If the ping is successful, it is possible that you might be able to use an IP address in the correct range for an Ethernet cable (but I doubt that it works for the wireless).

  It is very difficult to cite anything in this forum.  If you click on the link "Reply citing", all of the message to which you are replying is quoted.  You can copy the citation and delete parts of it, but it is not very user friendly.

• How to get the game of ball of ink on Windows XP-based computer

  How to get the game of ball of ink on Windows XP based computer.

  Hello
  Also try this freeware site:
  http://www.bestvistadownloads.com/download-ink-ball-game-software.html
  B Eddie

• Is it possible to install a device to a Windows Vista-based computer when you can get Windows 98 drivers for the device?

  Is it possible to install a device to a Windows Vista-based computer when you can get Windows 98 drivers for the device?

  # You have need Vista compatible drivers - it's the only way it will work.  Installing bad drivers can even to hurt the unit or even your system to not try.  Get a new USB device that works with Vista, and has the correct drivers.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I had to restore my computer to factory settings and now I can't get on the internet

  I had to restore my computer to factory settings and now I can't go on the internet. I have Windows 7

  Hello

  When you perform a restore, you may need to reinstall the network drivers, etc..

  As you can not access the internet on the recovery computer, use the computer that you are on to get here to do this.

  Go to the website to make your computer > Driver and Software Support Section > find your computer model number > then your operating system > locate drivers Windows 7 > download and install the desktop > copy to flash drive > transfer onto the repaired computer.

  Driver downloads:

  Acer:

  http://us.Acer.com/AC/en/us/content/drivers

  ADVENT:

  http://www.adventcomputers.co.UK/product-downloads

  Alienware:

  http://support.Alienware.com/Support_Pages/Restricted_Pages/driver_downloads.aspx

  ASUS:

  http://www.ASUS.com/support

  Dell:

  http://www.Dell.com/support/drivers/us/en/19/ProductSelector

  eMachines:

  http://www.eMachines.com/EC/en/us/content/drivers

  Fujitsu:

  http://www.Fujitsu.com/us/support/

  Gateway:

  http://us.gateway.com/GW/en/us/content/drivers-downloads

  HP:

  http://WWW8.HP.com/us/en/drivers.html

  Lenovo:

  http://support.Lenovo.com/en_US/downloads/default.page#

  LG:

  http://www.LG.com/us/support/software-manuals

  Samsung:

  http://www.Samsung.com/us/support/downloads

  Sony Vaio:

  http://eSupport.Sony.com/Perl/select-System.pl?Director=driver

  Toshiba:

  http://support.Toshiba.com/drivers

  You can download all the drivers this way, or once you have network and/or pilots Wi - Fi installed get the rest downloaded directly to the repaired machine.

  See you soon.

• The intention to restore the computer to factory settings. How can I get Win10 again?

  I have an emachine at less than ten years now. Originally it had installed Win7 on it and last year I got the free update of Win10. No problem downloading or installation, have no problem with it, but this poor old clunky machine is to his last breath. I want to do a "restore to factory settings. I know it will destroy everything, and I guess he'll reinstall Win7, after which I would download and re - install Win10 just like I did before.

  Can I do this?

  Should I have my registration key of Win10?

  Where would he get this information?

  Win10 is still available as a free download/install as if it were last year?

  I don't want to restore on Win7 to see that now I have to buy the Win10 I'm currently using for free, I want to know ahead what to expect and what will be expected of me until I push the button.

  Yes, I know, I need a new computer, but it is not the budget for it right now. It's why I can't really afford to buy Win10 if I don't have one.

  Thank you

  JaeMmb

  Yes, you can.

  Format your system and install Windows 7 and turn it on.

  After coming to start windows update and when your windows 7 updated, it will automatically give you 10 free update Windows.

  But the upgrade of your system before July 29, 2016 because after that, you will only get the free update.

• Unable to get netflix to stream.  Just the data had emigrated from my old macbook.

  Hello

  I just had data migrated from old Macbook to the new macbook air.

  I can't figure out how to get my Netflix to stream.  I wonder to use silverlight.  is that correct?

  Thank you

  The following Mac Netflix tab can help: https://help.netflix.com/en/node/225

• How can I get my chosen homepage in a private window?

  I have no problem to select a home page of my choice, but it doesn't seem to be an option to start it in a private window. This can be done?

  As far as I know, there is no way to force Firefox to always start in private browsing mode. And in addition, your home page will not be loaded in navigation mode private because the default about:privatebrowsing page.

  If you want to start Firefox in private mode, you can simply right-click on the taskbar Windows 10, Firefox icon and select this option to open a new window in incognito.

  You can also add -private to the end of firefox.exe in the target for your shortcut to Firefox. This can be found in the properties of the shortcut, if you right click and select Properties.

• Unable to get power and volume icon on the taskbar.

  I lost my volume and power icon taskbar (they were there).  When I go to the area 'Turn icons on and outside', these two are dimmed and it wont let me turn on them (Windows 7).  I don't have hidden them... what should I do?

  Hi tominkc

   

  You can use the steps below and the check is these help-

  a. right click on a zone empty of the taskbar, and then click Properties.

  (b) in the Notification area, click Customize.

  c. for the icon of power and volume, select Show icon and notifications. The icon remains visible in the taskbar in the notification area, and notifications are displayed.

  d. click OK.

  Also see the help link below-

  http://Windows.Microsoft.com/en-us/Windows7/change-how-icons-appear-in-the-notification-area

   

  I hope this helps.

• I am unable to get ios mobile to connect to the Office Server, what can I do?

  The number of the server is the same on mobile than on approx. desktop Mobile application gives an error message stating cannot download archive server. What can I do to fix this?

  I assume you mean the developer app PhoneGap and the desktop PhoneGap app?

  If so:

  • Your device must be connected to the same network as your development computer.
  • Make sure that the versions of the PGDevApp and PGDesktopApp are up to date.
  • Try with a freshly created project - if it works, something can be upward with your particular project.
  • Add ports that pgdesktopapp uses to your firewall settings so that data can flow freely. You can temporarily disable your firewall to see if that's the problem.
  • You may need to add an exception to your antivirus software. Again, you can temporarily disable the AV to see if it is causing your problem.

• Unable to get laptop SVZ131A2JL model to recognize the VGP-PRZ20B docking station

  Guidance on how to do the above?

  Hello Sara,.

  Welcome to the community of Sony.

  SVZ131A2JL is the hardware configuration of the computer code. The name of the product is exactly the model of the computer.

  SVZ131A2JL is a computer series SVZ1311. You can check exactly the model # here: http://esupport.sony.com/US/p/support-info.pl?info_id=264

  Follow the steps here to connect and disconnect the cradle to your computer: http://esupport.sony.com/docs/pc/SVZ1311_series/EN/contents/03/15/02/02.html

  If the Docking Station is not recognized by the computer, download and install the Docking Station and to update driver using exactly the model of your computer, here: http://esupport.sony.com/US/p/select-system.pl?DIRECTOR=DRIVER

  You can check the driver for Docking Station and of his update on the Sony support to the RAID section page.

  Alternatively, you can come back with exactly the model of your computer and the issue in detail.

  Note: If my post answered your question, please mark it as an "accepted Solution".

• Unable to do an antivirus scan or pull up web pages on the Windows XP-based computer

  I can't seem to get anything on my computer, I can pull things up like yahoo mail and facebook that it it will bring up page is empty but it wont let me analyze my computer or something else that I don't know what to do

  Hello

  ·          When the issue started?

  ·          Is the same case in SafeMode?

  Step 1: Make sure that the virus is completely removed.

  You can Microsoft Security essentials to find viruses. Use the link below to download: http://www.microsoft.com/security/pc-security/mse.aspx

  Step 2: Verification of an error in the event viewer.

  http://support.Microsoft.com/kb/308427

  Step 3: Register a new user account.

  http://support.Microsoft.com/kb/279783

  For best performance I also suggest in the upgrade to Windows 7.

  http://Windows.Microsoft.com/en-us/Windows7/products/upgrade

• When I start my computer I get an error message about V protect Application on the Windows XP-based computer

  When I start my computer, I get an error message, "V Protect Application has encountered a problem and needs to close".

  System information Utility version 1.0.0.1

  OS version: Microsoft Windows XP Home Edition, Service Pack 3, 32-bit

  Processor: Intel (r) Celeron (r) CPU clocked at 2.66 GHz, x 86 Family 15 Model 4 Stepping 1

  Number of processors: 1

  RAM: 1 GB

  Graphics card: RADEON 9250, 128 MB

  Hard disks: C: Total - 76316 MB, free - 47785 MB; KC: total - Mo 305168, Free - Mo 304760;

  Motherboard: MICRO-STAR INTERNATIONAL CO., LTD, P4M266-8233,

  Antivirus: AVG Free Antivirus, update: Yes, On-Demand Scanner: enabled

  I run the above system and would appreciate any help with the removal of this message as if I don't send it to Microsoft, it goes.

  Thank you

  Roy.

  You can try those Microsoft committed the 'experts' ideas Support Engineer (1, 2, 3) for safe, clean boot Mode, Online Scanner, but I think that most of the people who know how XP would recognize that there is no component 'V protect' in Windows XP and a simple search Google reveals that your problem is with your AVG software and has nothing to do with Windows XP.

  You should look in their forums (like me) and here's what they suggest:

  Vprotect belongs to AVG Security Toolbar.
  Please try to run repair installation using the latest installation package.

  If the problem persists, please follow all the steps in the instructions to complete reinstallation .

  I think that if I were you, I would follow the instructions on the page AVG to uninstall and reinstall your AVG because there may be other parts of AVG who are afflicted that you have not yet discovered, but in AVG, some people with V forums protect problems find that AVG repair install works.

• Gets the 0x0000001e Error code in the Windows Vista-based computer.

  Original title: I get the dreaded blue screen of death, the error code is 0x0000001e any help at all would be great :D Publication of minidump files.
  I don't really know what the cause is, it started about a week ago about the time when I tried to install fallout 3 (recently purchased). Now, it produces only randomly when im on the web or happens when I try to play any game fallout not only of pc. I think we can do with one or some of the drivers more but I would like to help before you start drivers unistalling xd.
  Here are my files minidump from the 2 blue screens I had recently, I would have more but I reformatted my comp to see if he'll fix it but there no: / If you are not comfortable with the links to download like that I could just copy and paste the minidump files 2 guy some help: D.

  http://up.HT/OZOUCb

  Hi LiamDonnelly,

  You have McAfee installed on your computer?

  If you have McAfee installed, uninstall it temporarily using the McAfee Consumer Product Removal tool. Therefater, check if the problem occurs:

  How to uninstall or reinstall supported McAfee products using the tool of Consumer Products Removal (Development)

  Hope the helps of information.

• Unable to play "Star Wars: Commando of the Republic" in the Windows Vista-based computer.

  Changed the title: anyone knows what does this error message mean?

  For centuries, I tried to get this game "Star Wars: Commando of the Republic" to work on my Windows Vista Edition Home Premium, computer portable 32-bit. I have install the program and a few extras with it and when I try to run the application an error message opens (by the way it's called "Microsoft Visual C++ Runtime Library"):

  Runtime error!

  Program:... Republic

  Comando\GameData\System\SWRepublicCommando.exe

  abnormal termination of the program

  Accordign to the card that came with it, my computer program is quite capable of runing the program without falts.

  I hope someone can help

  William

  Hi William,.

  What is the full error message that you receive?

  You can uninstall the Package redistributable Microsoft Visual C++ Runtime for Add / Remove Programs & reinstall again. Later, check to see if the problem persists.

  Package redistributable Microsoft Visual C++ 2010 (x 86)

  Hope the helps of information.