Restore the Table Pagination

Similar Questions

• Restore the table through flash back

  Hello
  
  How to restore the table if we do not have back on the database.
  
  DB = 10g
  OS = aix
  
  Kind regards
  JAM

  then why we undo_retention in flashback technology.

  Because any flashback technology is based on Undo data only, except Flashback database, which requires newspaper Flashback and whose associates db_flashback_retention_target parameter; Therefore, if someone asks you something like

  Undo_retention = 15 min
  db_flashback_retention_target = 1440 min

  is confusing (especially, when you are going to compare), because the two are different. First one is bound to cancel the data, while second is for flashback logs.

  DB_FLASHBACK_RETENTION_TARGET applies only to the flashback logs that are written only if you put your DB in flashback with alter database flashback mode

  For a table of flashback, flashback logs is not necessary, only for the flashback database.

  Concerning
  Girish Sharma

  Published by: Girish Sharma October 11, 2012 19:15

• The table pagination

  Hello
  
  I have a table that shows 1-10 of 200 + lines. Control table and pagination returns to 1-10 results, no matter what I select from the pagination control. Then, pressing does not display the next set of results. The feature worked but now it "stopped" working.
  
  Not very well how to debug the component or what I'm doing wrong.
  
  I use JDev 10.1.3.4.0.4270
  
  Here's an excerpt from my table definition:

                
  <af:table value="#{bindings.PossibleLinkedMatters.collectionModel}"
            var="row"
            rows="#{bindings.PossibleLinkedMatters.rangeSize}"
            emptyText="#{bindings.PossibleLinkedMatters.viewable ? 'No rows yet.' : 'Access Denied.'}"
            binding="#{backing_app_brc_LinkToExistingMatters.table1}"
            id="table1" banding="row" first="#{bindings.PossibleLinkedMatters.rangeStart}">
    <af:column sortProperty="AppId" sortable="false"
               binding="#{backing_app_brc_LinkToExistingMatters.column1}"
               id="column1">
      <f:facet name="header">
        <af:outputText value="Possible Matches" id="outputText2"
                       inlineStyle="text-align: center; display: inline-block; width: 100%;"/>
      </f:facet>
      <af:panelHorizontal binding="#{backing_app_brc_LinkToExistingMatters.panelHorizontal1}"
                          id="panelHorizontal1">
         <MISC DATA />                       
      </af:panelHorizontal>
    </af:column>
  </af:table>

  Published by: user8287746 on October 1st, 2008 14:34

  Default iterators is refreshed at least twice during the cycle of life: in the preparation of model and rendering modern stage, where the execution of user code falls inbetween. Go to definition this jspx pages, find in the executable files of the PossibleLinkedMatters iterator, change it is Refresh attribute to "renderModel", this will fix the problem unless there is an action performed after that refreshing the iterator. Keep in mind so that during the execution of user code this iterator will probably empty however.

  Published by: Elijah on October 1st, 2008 01:46

• It is possible to reach the column of the table pagination in the ADF?

  I have this huge table of important data and want to have some "frozen" a table and beside him several pages of groups of columns that I can see with a 'next' button, "previous", similar to this site:

  Regular season standings | MLB.com: Standings

  is this possible in ADF 12 c?

  Thank you in advance,

  Nik12c

  Hello

  You might have a property defined in the bean and set the visible property for the columns according to its value. Set the required values in the actionListener to the buttons.

  For ex: here's an example using the Emp table.

  JSPX source:

  Backing bean:

  package view.backing;
  
  import javax.faces.event.ActionEvent;
  
  public class ColPaginationBean {
      private int visColGroup=1;
  
      public void setVisColGroup(int visColGroup) {
          this.visColGroup = visColGroup;
      }
  
      public int getVisColGroup() {
          return visColGroup;
      }
  
      public ColPaginationBean() {
      }
  
      public void prevCols(ActionEvent actionEvent) {
          // Add event code here...
          visColGroup--;
      }
  
      public void nextCols(ActionEvent actionEvent) {
          // Add event code here...
          visColGroup++;
      }
  }
  

  Arun-

• How to do a pagination on the table?

  Hi all
  I hava ORT with large value data, and I drop a table.
  How can I make I pagable? I koen some api such as setRangeSize (n), scrollToRangePage (P), but I didn't know how to use it
  are there examples?
  Thank you
  user

  The table pagination is under construction.
  Define the RangeSize in the pageDef file.

  AF:table definition:

   fetchSize="#{bindings.ViewObj12_1.rangeSize}"
  

  If you set 50 (default is 25, the value - 1 to extract all) whenever when you scroll the table he realized extraction 50 lines.
  Have a sufficient height of the table to display 50 lines. If the height is not enough to show that 50 lines, she can send multiple requests to the server to retrieve the data.

• to restore the segment containing the block indicate

  Hello

  1. a database with no archivelog mode.

  2 the judgment

  3. startup mount

  4. restore the database

  5. change the database open

  6. Select * from report_data

  7 ORA-01578: block of data ORACLE (corrupted file # 16, block # 1389655)

  ORA-01110: data file 16: ' / app/oracle/oradata/etaxn/users07.dbf'

  ORA-26040: data block has been loaded using the NOLOGGING option

  01578 00000 - ' corrupted ORACLE data block (file # %s, block # %s)).

  * Cause: The specified data block has been altered, mostly due to software

  errors.

  * Action: Try to restore the segment containing the specified block. This

  may involve the removal of the segment and recreate it. If it is

  There's a trail file, report the errors inside your Oracle

  representative.

  8. how to restore the segment containing the block indicate?

  Indicate whether the segment containing this block is an Index or Table.  Query DBA_EXTENTS for this.

  If there is an Index, you can DROP INDEX and CREATE INDEX.

  If it is a table you could mark the corrupt block and Oracle will avoid to read the data in this block - lines in this block are not recoverable.

  Or you could restore the table from a backup (export or backup datapump?) and redo all the transactions that took place on the table since the backup.

  Start by reading Oracle Support Note "handling block Oracle Corruptions in Oracle 7 / 8 /» "8i/9i / 10g / 11g [ID 28814.1].

  Hemant K Collette

• How can I see the/restore the contents column table?

  I moved to the division to the left bar; the table of contents (Records menu) disappeared. I can't figure out how to restore this column that contains the table of contents. I can't see my "inbox." maybe this question is too simple to be registered as an aid. Maybe I don't know the right words for these things. Thanks for the help of someone.

  Take your mouse on the left margin and watch so he could set up a double headed arrow. When this is the case, left click, hold and drag to the right.
  Basically reverse what you did to hide.

  Which would be called the folders pane. If she does not return the above, go to the menu bar, and then select View-presentation-folder pane to turn it back on.

  No bar menu with view? Press the ALT key.

• Pagination of the table in a query with table Panel

  Hello

  I need to implement paging in a table as long as the results of a query which makes the user, the table that the query is run has several records, 40000 or more.

  I searched but I can't find a way to apply what I, some links show me how to insert the pagination on the part of the table, but if I only do when I want to see a different page, let's say 500 or 1000, it takes too long to display the data of that specific page. I'm guessing it will retrieve all the data from the query and read it all so it can show what I want.

  Another way is to control the amount of data to be returned from the view object (VO), but I am unable to perform paging efect component table in my file jspx somehow.

  I think I should change my VO both my component so I can get the effect I want, but I don't know how. Properties that I need to change to achieve this.

  THK

  If I set the af: non paginated table mode the number of pages do not appear.

  Then maybe you can use the code from this blog to do it manually:

  http://www.Ateam-Oracle.com/adventures-in-WebCenter-skinning-aftable-with-custom-pagination/

  The only optimization that I think is missing is somehow when I select the page from the list of results, will retrieve only the data on this page.

  Yes and for this you must range Paging in VO (so the result of the query may be limited by the size of the range).

  But, as I mentioned in my first reply, range of paging is bug in 12.1.3 then maybe the same applies to 11.1.1.7

  Dario

• Unit test: disassembly of the table or restore the line failed: ORA-06502: PL/SQL: digital error or value: string buffer too small ORA-06512: at line 22

  Is any idea available in the process of disassembly of the table or restore the line to line 22?

  I see a bunch of discussions on the subject, but no clear solution/answer...

  What could be the causes of this error?

  I had two process of disassembly on the level now, and one of them had failed with this error. Displacement of the failure of the process of disassembly compared to the level of the suite for the level of performance of test unit solved the error for a while, but after some more dragging the process of disassembly of the table (with about 500 cases) is permanent.

  Please advise...

  Thank you

  Val

  Well, had to create a bug officially... I hope this helps...

  Bug 19696042 : UNIT TEST: disassembly of THE TABLE or LINE RESTORE failed: ORA-06502: STRING BUFFER TOO SMA

  Thank you

  Val

• Restore the value of the selected line in the editable Table.

  Hello, I use Jdeveloper 11.1.2.1.0.
  
  My problem is:
  1. Select a line in the editable table.
  2. change the value inside elements of the af:inputText of columns.
  3. tap on restore.
  4. the values of the selected line remains the same.
  
  If I select another line, before the restore, the restore will work as expected.
  
  I want to when you press the button cancel the values of the selected row to be rollback-ed as well.

  Set the immediate on all the inputTextFields in the table and it worked.

  Thank you.

• restore the 2 tables FND_USER and FND_ORACLE_USERID

  Just practing fndcpass, took the backup of these tables, create the table in select fnd_backup * to fnd_ *, I was wondering what is the trunk command to restore these 2 tables.
  
  I just changed apps, sysadmin, & alloracle pw, I want just convenient if these are up... messed up somehow update the lines for these users only?

  Just practing fndcpass, took the backup of these tables, create the table in select fnd_backup * to fnd_ *, I was wondering what is the trunk command to restore these 2 tables.

  You need to save the two tables, FND_USER and FND_ORACLE_USERID.

  To restore, just rename tables (rename FND_USER_BACKUP in FND_USER and FND_ORACLE_USERID_BACKUP to FND_ORACLE_USERID after you rename the tables updated to FND_USER and FND_ORACLE_USERID).

  FNDCPASS. Troubleshooting Guide to connect and change the passwords of Applications [ID 1306938.1]

  I just changed apps, sysadmin, & alloracle pw, I want just convenient if these are up... messed up somehow update the lines for these users only?

  Direct update is not supported, so you'll need to restore the backup of the tables or reuse FNDCPASS to change the password back.

  Thank you
  Hussein

• Estimation of the time needed to restore a table.

  Hello
  
  We need to perform a speed test our DC responds to an urgent request to restore a table.
  Can you please provide a list of the information that we ask beb able to estimate the time to restore a for example. Table 1 GB?
  
  HW (machine band (e/s), HARD drive, etc...)
  SW (used backup S/W, S/W configuration, etc...)
  
  DBs are 9i and 10g
  
  I know it's a very general question, but I'd like a list of the key things that I should know.
  
  Thank you!

  Hi Fahd,
  I do not understand this answer coming from a DBA experienced as you. I know you know, but you should clarify for the less experienced posters. Reading your post, we might think that in a problem that is bound to a table, you are prompted to restore the only valid information about backups are:
  -J' have a dumpfile with this table? What is its size?

  through the export of a table dump file. Yes, the relevant question.
  Just the table dump file.
  If the problem involves to get a particular table as it was 15 days, 5 hours and 4 minutes ago the dumpfile is not a solution. If the table was created after the last export the dumpfile is not a solution. If the table has been deleted and you want to get in its last State before the fall of the dumpfile is not a solution.
  ARCHIVELOG or not, the version of Oracle etc. are relevant information.

  You cannot restore/retrieve a single table of hot or cold backup.
  Not directly, but you're still able to restore a set of data files to recover an auxiliary database and export the miraculous picture.

  In any case in the latest versions of Oracle he often even not necessary to "restore" what whether for a problem related to a single table. The OP may also have a database of pending that could help him etc etc.

  Best regards
  Phil

• After that I restored the backup Thunderbird using Mozilla Backup, any of my accounts table. I checked that they are in need of backup, lift the mail.

  I backed up my 24 Thunderbird using Mozilla Backup. I did what I had to change one of my accounts. After making the changes, I decided to restore the backup I took. Restore seems to work and I checked the profile is correct and e-mail accounts are in the mail folder. However, when I run Thunderbird, only the Local folder is displayed, any of my email accounts. I really need to get this working I have very important data in the email. Thanks for your help.

  Did you change the path where the mail files?

  And, you use local folders in the GUI of TB to store messages?
  Did not have that clearly in your post.

  According to what you actually did Re: evolution of the accounts, & if the backup has been restored in the way (profile) accounts (and the profiles.ini file) think they are in. if the profile is now in a different path, you will need to change the path in the file profiles.ini to reflect the correct path.

  Also, sometimes after restore or do other work, the *.msf files in e-mail files get damaged or simply confused. The .msf files are in the same folder as the Inbox, sent, etc.. They are the index files - not electronic mail storage files. (the mail storage files do not have extensions).

  Often, when the email that actually exist in the mail files does not show in the accounts, remove only files *.msf in each acct mail storage file will correct it. This is the easiest step to try, but again - it depends on actions leading to the question.

  They will be recreated when TB restarts & apparently can "fix" themselves, to redisplay stored messages. Unless something on current storage files is corrupted.

  http://KB.mozillazine.org/Disappearing_mail

• Restore the partition table data

  Hello
  
  
  DB 10.2.0.1
  
  I have a dump file in which exported the data from a table to a database. This table is based partioned. I have imported into the database B. I have truncated or tried successively to the partition of the table in database B now I want to import the data from the export dump file in the same table. I don't want to import the data again for all partitions. I want to just import only truncated how data I could do?
  
  Thank you

  Hello

  Even I did as you say, but we give below error.

  In fact, it is not an error message:

  Import completed successfully without warnings.

  You have SQL code contained in the "dump":

  CREATE TABLE 'TRADING_TEST' ("BRAND_DESCRIPTION' VARCHAR2 (120)...)

  For example, you may notice that importation will try to recreate the Table of TRADING_TEST with all its partitions. Of course, it will generate an error and you will not be able to import the data in the Partition. Unless you have just TRUNCATE and you use the parameter IGNORE = Y.

  So, if you TRUNCATE the Partition you do not have to recreate.

  If you DROP the Partition, it is best to recreate first (ALTER TABLE ADD PARTITION...).

  Then import you the datas like that (I just add IGNORE and LOG settings):

  imp system/password file=C:\exportTable32\table.dmp FROMUSER=dev touser=system tables=(TRADING_TEST:A15) ignore=y log=C:\exportTable32\table.log
  

  However, I hope that it is just for test purpose, because it is not recommended to create the user Tables in the SYSTEM.

  Hope this helps.
  Best regards
  Jean Valentine

• Filtering problem date to the table QBE filter when it is supported by the POJO data control

  @Timo Hahn ADFfan 11.1.1.4 or 11.1.1.7

  I have exactly the same problem as described in the discussion archived here unanswered

  Definiton vc_temp_1 not found error for the filter of the columns date

  I used the sample downloaded 37 here as a model

  037. how to build the pagination in the POJO ADF data control

  http://www.Oracle.com/technetwork/developer-tools/ADF/learnmore/index-101235.html

  It is easy to replicate, just to run this sample and try to filter on the date of hire.  It takes about 2 minutes to download and run.

  sample image 37 running on 11.1.1.7

  

  Here is the stacktrace.   Don't know why it's using java.sql.Timestamp.   My POJO returns a java.lang.Date

  java.lang.IllegalArgumentException: timestamp format must be yyyy-mm-dd hh: mm: [.fffffffff]

  at java.sql.Timestamp.valueOf(Timestamp.java:194)

  to oracle.jbo.common.JboTypeMapEntries$ 3.convert(JboTypeMapEntries.java:149)

  at oracle.jbo.domain.TypeFactory.get(TypeFactory.java:855)

  at oracle.jbo.domain.TypeFactory.getInstance(TypeFactory.java:102)

  at oracle.jbo.common.JboTypeMapEntries.convertValue(JboTypeMapEntries.java:382)

  at oracle.jbo.common.OracleTypeMapEntries.convertValue(OracleTypeMapEntries.java:162)

  at oracle.jbo.common.JboTypeMap.convertValue(JboTypeMap.java:869)

  at oracle.jbo.domain.TypeConvMapEntry.convert(TypeConvMapEntry.java:120)

  at oracle.jbo.domain.TypeFactory.get(TypeFactory.java:855)

  at oracle.jbo.domain.TypeFactory.getInstance(TypeFactory.java:102)

  at oracle.jbo.RowComparator.compareEquals(RowComparator.java:34)

  at oracle.jbo.RowValueSupplier.compareValues(RowValueSupplier.java:253)

  at oracle.jbo.expr.JIParserNode.evaluate(JIParserNode.java:1274)

  at oracle.jbo.ExprEval.doEvaluate(ExprEval.java:1099)

  at oracle.jbo.ExprEval.evaluateForRow(ExprEval.java:911)

  at oracle.jbo.RowMatch.rowQualifies(RowMatch.java:187)

  at oracle.jbo.server.ViewObjectImpl.rowQualifies(ViewObjectImpl.java:2811)

  at oracle.jbo.server.QueryCollection.rowQualifies(QueryCollection.java:3705)

  at oracle.jbo.server.QueryCollection.populateRow(QueryCollection.java:3590)

  at oracle.jbo.server.QueryCollection.fetch(QueryCollection.java:3387)

  at oracle.jbo.server.QueryCollection.sortRows(QueryCollection.java:994)

  at oracle.jbo.server.ViewRowSetImpl.execute(ViewRowSetImpl.java:1184)

  at oracle.jbo.server.ViewRowSetImpl.executeQueryForMasters(ViewRowSetImpl.java:1338)

  at oracle.jbo.server.ViewRowSetImpl.executeQueryForMode(ViewRowSetImpl.java:1256)

  at oracle.jbo.server.ViewRowSetImpl.executeQuery(ViewRowSetImpl.java:1250)

  at oracle.jbo.server.ViewObjectImpl.executeQuery(ViewObjectImpl.java:6809)

  at oracle.adf.model.bean.DCBeanDataControl.executeIteratorBinding(DCBeanDataControl.java:948)

  at oracle.adf.model.binding.DCIteratorBinding.doExecuteQuery(DCIteratorBinding.java:2177)

  at oracle.jbo.uicli.binding.MyIteratorBinding.executeQuery(JUAccessorIteratorDef.java:721)

  at oracle.jbo.uicli.binding.JUSearchBindingCustomizer.applyAndExecuteViewCriteria(JUSearchBindingCustomizer.java:607)

  at oracle.adfinternal.view.faces.model.binding.FacesCtrlSearchBinding.processQuery(FacesCtrlSearchBinding.java:442)

  application example will reproduce the problem with no changes

  Post edited by: Don Kleppinger confirmed it happens on 11.1.1.7 as well (see image)

  Frank Nimphius-Oracle

  I have a work around for this bug to Oracle.  I have a version in 037 sample that actually works and that will sort the field date.  I'm ready to download a copy to replace the download version that is there if Oracle is listening.  The sample was there 5 years ago so it is regrettable that this bug still exists.

  That's what I did

  create beans with custom queryListener

  On the table

  change

  queryListener = "#{bindings.allEmployeesQuery.processQuery} '"

  TO

  queryListener = "#{queryListenerBean.processQuery} '"

  Add an additional field to the line which is a long value of the Date column.   In the queryListener I change the input filter on the value of long type instead of the date value.

  I do not display the column containing the value of long (time) in the table, but she must appear in the binding of the tree. (shuttles to the right)

  In the listener query

  • Read the filter value Date and read the value of time full, clear the value of the filter date
  • long time set in the filter
  • Run the query by call of the listener of the original request #{bindings.allEmployeesQuery.processQuery}
  • Set the date value to the value entered by the user
  • erase the value of long type

  Here is the code

  {} private void processQuery (QueryEvent queryEvent)

  Table richeTableau = (RichTable) queryEvent.getComponent ();

  FilterableQueryDescriptor filterQD = (FilterableQueryDescriptor) table.getFilterModel ();

  Card filterCriteria = filterQD.getFilterCriteria ();

  Date dt = (Date) filterCriteria.get ("hireDate");

  time of to of subject Date and filter on hireDateLong instead of column hireDate column

  containing the value of long type of date instead of the Date

  If (dt! = null) {}

  TM long = dt.getTime ();

  filterCriteria.put ("hireDateLong", tm);

  filterCriteria.put ("hireDate", null); This must be null or will not work

  }

  DCBindingContainer bc = (DCBindingContainer) BindingContext.getCurrent () .getCurrentBindingsEntry ();

  Object execBinding = bc.findExecutableBinding ("allEmployeesQuery");

  does not perform a cast of the class internal oracle but another technique guided under

  does not work with POJO data control

  run the filter

  (ExecBinding) .processQuery (queryEvent) (FacesCtrlSearchBinding);

  This will fail

  invokeQueryEventMethodExpression ("#{bindings.allEmployeeesQuery.processQuery}",)

  restore the value of the filter if he continues to display in the QBE bar

  filterCriteria.put ("hireDate", dt);

  filterCriteria.put ("hireDateLong", null);

  }