Restore to 'apply the layer mask' OPTION?

Similar Questions

• Why apply the layer mask is grayed out?

  Hello

  From time to time 'apply the layer mask' is not available.

  What I checked myself:

  -Photoshop is not in master view (abbreviation Q).

  -J' have reset all warning dialog boxes (since it is a way to get a mask by dragging it to the trash).

  Can't get to work!

  Other solutions? Thank you!

  

  I found myself - the layer was a dynamic object. Perhaps I should suggest Adobe to let Photoshop ask pixelation during application, instead of just greyin'out.

• apply the layer mask selection

  Hello

  IAM looking for a solution to apply a previeuws

  choice of a layer of an adjustment layer mask.

  The gale of my code to select the mask - but when I apply the

  selection, it creates top layer.

  I need to go into the layer mask (alt and click) and then paste it.

  Then turns off.

  Scriptlistender is not helping much.

  
  app.activeDocument.selection.selectAll(); //selects stuff on the preview layer
  app.activeDocument.selection.copy();  //copy that stuff - to paste it into the mask later
  
  var adjLayer = doc.layerSets.getByName("ao").artLayers.getByName("ao");  //searching for a group and specific layer
  var mask = ExtendedLayer.selectLayerMask(adjLayer); // extern function wich selects the mask (does not go "into" the mask - just selects it)
  
  
  pastMask = function()
  {
  
  // Selectin recorded by Script listender
  var idslct = charIDToTypeID( "slct" );
      var desc321 = new ActionDescriptor();
      var idnull = charIDToTypeID( "null" );
          var ref212 = new ActionReference();
          var idChnl = charIDToTypeID( "Chnl" );
          var idChnl = charIDToTypeID( "Chnl" );
          var idMsk = charIDToTypeID( "Msk " );
          ref212.putEnumerated( idChnl, idChnl, idMsk );
      desc321.putReference( idnull, ref212 );
      var idMkVs = charIDToTypeID( "MkVs" );
      desc321.putBoolean( idMkVs, false );
  executeAction( idslct, desc321, DialogModes.NO );
  
  // paste, recorded by script listender
  var idpast = charIDToTypeID( "past" );
      var desc322 = new ActionDescriptor();
      var idAntA = charIDToTypeID( "AntA" );
      var idAnnt = charIDToTypeID( "Annt" );
      var idAnno = charIDToTypeID( "Anno" );
      desc322.putEnumerated( idAntA, idAnnt, idAnno );
  executeAction( idpast, desc322, DialogModes.NO );
  
  
  };
  pastMask();
  
  

  Any help would be really nice. !

  Thank you very much

  Alpha

  app.activeDocument.selection.selectAll (); selects on the preview layer stuff

  app.activeDocument.selection.copy ();  copy such things - to paste it later into the mask

  var adjLayer = activeDocument.layerSets.getByName("ao").artLayers.getByName ("ao");  looking for a group and a specific layer

  activeDocument.activeLayer = adjLayer;

  pastMask = function()

  {

  Selectin registered by the listender Script

  var idslct = charIDToTypeID ("TPCV");

  var desc321 = new ActionDescriptor();

  var idnull = charIDToTypeID ("null");

  var ref212 = new ActionReference();

  var idChnl = charIDToTypeID ('channel');

  var idChnl = charIDToTypeID ('channel');

  var idMsk = charIDToTypeID ("Msk");

  ref212.putEnumerated (idChnl, idChnl, idMsk);

  desc321.putReference (idnull, ref212);

  var idMkVs = charIDToTypeID ("MKV");

  desc321.putBoolean (idMkVs, true);

  executeAction (idslct, desc321, DialogModes.NO);

  dough, recorded by the listender script

  var idpast = charIDToTypeID ("gone");

  var desc322 = new ActionDescriptor();

  var the idAntA = charIDToTypeID ("AntA");

  var idAnnt = charIDToTypeID ("Annt");

  var idAnno = charIDToTypeID ("year");

  desc322.putEnumerated (idAntA, idAnnt, idAnno);

  executeAction (idpast, desc322, DialogModes.NO);

  };

  pastMask();

• I want to see the layer mask instead of the thumbnail of the layer mask in the layers palette.

  I don't see a thumbnail of the mask layer instead of the layer mask itself when I add a layer mask to the CS6.  How can I change this so the layer mask

  appear in the layers palette?

  Thank you

  Marc

  From what I remember of the CS6, it's the same CC follow these steps: in the layers palette, click on Panel options

  

  Click on the larger thumbnail

  

  The layer mask should now be big enough to see. Otherwise, you need to display it on the screen by alt clicking on

  on a PC option by clicking on the layer mask on a Mac

  

• White color on the layer mask does not

  Well, I have a problem... Each setting is fine, but when I open the layer mask on a layer, and if I have the black brush, it works very well, BUT if I brush white, it does not work. It's like the color white is on 0% opacity. It shows me an action in "history, but it's like I'm not even brushing."
  Now, when I want white brush, I switched layer mask, brush black and then I reverse again, because as I said, the white color just doesn't work...
  -Colours btw, work not in a layer mask

  Is the Mode in the Options bar to brush on something other than normal?

• Best way to apply the Format mask for the fields in a Table of the ADF

  Hi all

  12.1.3 JDev

  I would like to introduce the price data, quantity etc. fields of the ADF Table of the user interface in a specific format.

  These formats need to be dynamic, because they change according to the locale selected and sometimes they differ in the same locale.

  I tried approach converter custom but not satisfied because it is called several times when it is used in a table of the ADF and when asked that told me that this is the behavior.

  Custom converter of an attribute in a table called several times

  So, please suggest a better way to apply the format mask (which has min & max fractions, grouping, rounding) to the fields in the Table of the ADF.

  Please let me know if you need more information.

  Thank you

  B S Bilodeau.

  The second question, which I've mentioned here is the converter is called several times for each click on the table.

  This isn't a problem, this is the expected behavior (and you can't avoid it).

  Dario

• Opacity of the layer mask Photoshop in AE

  I have a series of PSD files each with a layer mask with a default opacity of 100%. PS, I change the 'density' of the layer of about 15% in order to achieve the desired result. Either way, the layer mask is also an inactive Alpha channel.

  My question is that when I include the series of the PSD AE as-is, the layer mask is available as a black. It doesn't seem to be a way adjust the density of the mask as in Photoshop. I tried to use an alpha channel and track matte, but no luck. The main PSD file has the default active layer apparently mask with no way to change it.

  Maybe I'll have to put in place an action on PSD files?

  Thank you.

  

  AE is not layer masks as separate channels, it uses only the calculated pixel opacity. Simply, you cannot use this method. Rasterize your stuff to separate the layers.

  Mylenium

• How to resize layer with a large image of the layer mask?

  Hi all

  How to resize the image on the layer mask?

  * document - doc.width, doc.height

  * mask - activeLayer.bounds

  * and how to take the coordinates in the image with the mask, if the image is larger than the size of the document?

  

  2014, use it at your own risk.

  #target "photoshop - 70.032»

  If (app.documents.length > 0) {}

  Var ref = new ActionReference();

  ref.putEnumerated (charIDToTypeID ("Lyr"), charIDToTypeID ("Ordn"), charIDToTypeID ("Trgt"));

  var layerDesc = executeActionGet (ref);

  var layerMaskEnabled = layerDesc.getBoolean (stringIDToTypeID ("userMaskEnabled"));

  If (layerMaskEnabled == true) {}

  // =======================================================

  var idsetd = charIDToTypeID ("setd");

  var desc4 = new ActionDescriptor();

  var idnull = charIDToTypeID ("null");

  var ref1 = new ActionReference();

  var idLyr = charIDToTypeID ("Lyr");

  var idOrdn = charIDToTypeID ('Ordn');

  var idTrgt = charIDToTypeID ("Trgt");

  Ref1.putEnumerated (idLyr, idOrdn, idTrgt);

  Desc4.putReference (idnull, ref1);

  idT var = charIDToTypeID ("T");

  var desc5 = new ActionDescriptor();

  var idUsrM = charIDToTypeID ("rocket");

  Desc5.putBoolean (idUsrM, false);

  var idLyr = charIDToTypeID ("Lyr");

  Desc4.putObject (idLyr, idT, desc5);

  executeAction (idsetd, desc4, DialogModes.NO);

  };

  Alert (app.activeDocument.activeLayer.bounds)

  };

• How to paste a picture into the layer mask? (Photoshop Cs6)

  How to paste a picture into the layer mask? (Photoshop Cs6)

  Try the steps in this tip video tutorial:

  Good luck!

  See you soon,.

  Kendall

• How can I change the opacity of the layer mask?

  HI -.

  
  

  I used a layer mask to hide portions of a picture.

  Now I need to leave this hidden part of show at, say, 50% opacity (I'll have to experiment to find the optimal percentage.).

  I'd like to screw up the layer mask and start on another.  Already, I thought I could duplicate the masked layer, remove the mask on the copy and set its opacity to 50% but now I have 2 layers.  I suspect that there is a way to do without a double layer.

  Is it possible to adjust the opacity of the layer mask?

  TIA your entry

  JL

  Win7, Photoshop CS5
  

  Have you tried to use the controls in the masks palette?

  You control the opacity of the area exposed with the opacity of the layer and the density of the hidden box with the density on the masks palette slider.

• Change the layer mask: Alt + Shift + click does not work?

  I have PES 9 w/Mac OS X.  According to Adobe using for layer masks, "to display the mask in a mask color red, hold down the Alt + Shift and click on the thumbnail of the layer mask".  It is also stated by Missing Manual for elements.  I can't get this to work and can display the mask only in itself (in black and white).  I have uninstalled/reinstalled without success.  In other words, when I change the mask, I don't see where I'm editing.  Can someone help me?

  Exit the editor, then go in your username > library > Preferences and delete:

  com.adobe.PhotoshopElements.plist

  Adobe Photoshop Elements 9 paths

  Adobe Photoshop Elements 9 parameters

  Repair permissions, and then try again.

• Apply the multiple merge options to the same layer?

  How can I apply layer several options to a single layer of merger? Currently, when I select a merge option and switch to the other, it removes the previous merge option

  Thank you.

  You can duplicate the layer and the upper layer the second blending mode value. Or you can create an adjustment layer and set its blending mode for the second favorite mode (this will blend a visible merged copy of the layers under DOS in the visible stack). It depends on what you're trying to do. In general however, blending modes are a mixture of pixels in a layer in a visible merged copy of those below, to add two modes to a layer seems impossible.

• Using the layer mask in Photoshop CC 2015?

  Hello!

  I'm trying to iron out some unsightly underarm in Photoshop CC 2015.

  I duplicated the layer and applied Surface blur.

  I clicked on the layer of the dup, while pressing option (using a Mac) to create a layer mask where I could brush the blur in but nothing happens. What I'm missing here?

  Thank you!

  Confirm:

  The blurred version is on a layer above the background image

  The version hazy layer has a black mask

  You paint the mask in white with the brush opacity Normal and 100% value

  The Brush tool is not too much to feathers. (To check, use brush hard edge as a test)

• Changes to the selection without affecting the layer mask

  Hello

  I've hidden an image selection using the lasso tool. Added an adjustment layer (exhibition) and reduced the exposure. And then refined at the edge. Any fine. I add the layer to selection, and then click change the mask with the lasso to add and subtract the mask tool. I change the setting - raise or lower the exposure - but only the previous selection is affected - even if the framing box clearly shows the changes made to the selection.

  I need to create a new layer of setting each time so that it can work properly.

  Is - this usual? I thought that one could just edit the mask and then changes are applied automatically?

  Thank you

  Jez

  When you have a selection and create an adjustment layer, selection is enabled in the mask, so there is no longer a choice. By clicking on add a new selection to the selection at this point to this fact and does not add to the mask. You must use this selection and add fill it with white, black or a shade of gray that will then be used to request that the amount of the correction of the adjustment layer. If you want two different settings with different selections, then you will need to make two different adjustment layers.

• Gum changing from white to black on the layer mask, leaving the image transparent.

  I used the following method in CS5 to erase parts of a layer/bring these pieces back again if necessary. It works in the same way after that I upgraded to CS6 (not sure if the version difference plays a role or not.)

  What I'm doing here is blend two layers that overlap in one of the other

  1. create the layer to the top layer mask

  2. Select pure white in the color selection window

  3 select the Eraser tool, set the opacity to 30%, 50%, flow 100% hardness

  4. Select hide, erasing the edges of the image where there is overlap to eliminate hard edges and merge the images into another

  5. when I need to highlight an area of the image at the top (one mixed), I pass the color pure black opacity set to 100%, hardness 100% and paint over the areas that I want to "undo" my deletion.

  -Sometimes happens a lot after my initial deletion, so a simple cancellation or who goes back in history is not a possible solution at this moment here.

  -Another note: I have to move over the other layers to align as much as possible, make the story do not brush useful in this case.

  Previously, this would simply restore the image to where it was originally for this place, by removing completely all masking. Now, when I do this procedure, the area that I'm trying to "undo" is however, as if the opacity is set to a level lower than 100%. This poses problems because I want to have the completely opaque image at this stage.

  Some other notes I hope to answer some questions that may arise in advance:

  I haven't settled the opacity of one of my layer masks

  I tried to do the same operation by using the Brush tool (with 100% opacity and hardness, using the opposite colors), with the same result

  As we have earlier I don't know another effective way to achieve the same goal. I'd be happy to do it differently but if necessary.

  All the layers in these documents are dynamic objects

  Thank you!

  I'm sorry it's so confusing. I guess the only reason why I use the Eraser tool is a vestige of when I was actually erase the image - and also I get the brush and Eraser different opacity value to quickly switch between them.

  @Theresa actually, I didn't watch only the mask. Of course the mask was gray in the areas that I was talking about. But that lead me to realize that while the color picker looked purely black and white, I was working with a grayscale image, and it was in fact color and converted to looked at pure Grayscale black and white. I need to set the color of the brush at a certain point, when working in RGB (which I rarely do) and not realised.

  Sorry for posting something with such a trivial response, but you all help me to understand thank you!