Restore window 10 questions

Similar Questions

• Satellite A200-17O - how to restore Windows to the factory settings?

  Hello

  I have a Satellite A200-17O. I want to restore Windows Vista to factory settings, I did not need to backup all the files. I don't have the product recovery CD. When I press F8 and click on the "Repair" option, it will give me all the options, but when I click on the option to completely recover the system (the one on the bottom), it will simply open a window telling me to back up my data, then theres a button 'OK', and when I click that, the window will simply close and return to the menu options. All I want is to return Vista to factory settings.

  Thank you for your help.

  Hello

  Yes, normally you can restore your computer laptop initial configuration using disk HARD recovery option. Therefore, you must follow the instructions here:
  http://APS2.toshiba-tro.de/KB0/HTD1303440001R01.htm

  If it doesn't work, you need to use the Toshiba recovery disc. If your computer laptop didn t come with such a recovery disk you create yourself using recovery preinstalled creator tool. This is mentioned in your user manual, have you checked it?

  Therefore, you need a few blank DVDs. I recommend the DVD-R from Verbatim or TDK. Many users here have a good experience with these brands.

  If you have any other questions, just after again! ;)

• Error 1706 and restore Windows to previous state

  I have a 1706 error regarding a photo program pre-installed on my computer Dell in 2006.

  Search on the site Web of the seller said to find a particular .msi file and run the installation program that him, but a search of my computer files shows that I do not have this file.

  I searched the Internet and somewhere it was proposed to restore Windows to a previous state.  But when I do that, I get a message that the restore has not been made, and no changes have been made to my computer.

  I ran a registry repair, but that did not help.

  I have 2 separate problems here?  A Setup error AND a computer restore the question?  Or are they related in some way?

  You won't get any early responses constantly asking the same question (4 times in 4 minutes).

  I suggested that as a first step, you use the function "UNDO" - if available - in the program that you used to do the repair 'Register' and then uninstall and throw this program.  See http://chris.pirillo.com/are-registry-cleaners-safe-to-use/ , http://www.edbott.com/weblog/2005/04/why-i-don ' t-use - Registry cleaners / and http://support.microsoft.com/kb/2563254

  It seems that if you attempt to uninstall (or perhaps fix) an application program.  The MSI file is the Microsoft Installer file used to install the application in the first place.  The same file is also used to uninstall or repair the installation.  If this file was deleted a long time ago (or maybe even never present in the disk image of Dell that was used for the manufacture of your computer), System Restore won't help (don't).  System Restore is not a panacea.

  The usual method to solve problems in uninstalling applications is to install the application (which is to replace the missing msi file) again and then uninstall it.  Unfortunately, this does not work in all situations because some applications refuse to install if the old version is still present.  There are alternative methods - if uninstalling the app, that's what you try to do.

  It is possible that if you explain what you are trying to accomplish, someone may be able to provide a suggestion.

  To increase the probability of getting help, please provide the full text of the error message, and the name and version of the photo program.  Also, please provide the version of Windows you have, including the service pack (click right my computer and select properties for this info).  Because you have a Dell, provide your Number of Service Dell could also help.

• Restore Windows XP problems

  I'm having problems to restore Windows XP with service 3, whenever I go to the station Windows, Windows tells me that nothing has changed. Can someone help me with this problem

  Unfortunately, the implementation of MS Answers forums does not prompt for any information system when a new question is asked, so we don't know anything on your system.

  Not knowing the basic informations of a problem prolongs the frustration and the agony of these issues, but that's the way they choose to turn things around here.

  Thank you owners MS Answers, continue to make solving simple problems as frustrating and a lot of time as possible.

  What is your system brand and model?

  Describe your current antivirus and software anti malware situation: Microsoft Security Essentials (MSE), McAfee, Symantec, Norton, Spybot, AVG, Avira!, Panda, Trend Micro, CA, Defender, ZoneAlarm, Comodo, PC Tools, etc.

  What is the issue that you are experiencing that you think that the system restore will be remedied (or you are just convenient)?  Remember that the system restore is not a time machine.

  Have you ever used the system restore to restore your system in the past?

  Describe exactly what happens when you try to perform a system restore and the error messages you see which indicates that it does not work (some thing besides 'it does not work").

  Some tools Anti Virus 'protect' your system so that they will not allow a restore of the system work properly.

  For example, if you use Norton/Symantec products, you will see a message like this:

  Restoration incomplete. Your computer cannot be restored...

  It is also a popular Symantec problem (well, I'll be polite and call an "undocumented feature"...), they wrote an article about it:

  https://support.Norton.com/SP/en/us/home/current/solutions/v51118464_EndUserProfile_en_us?product=home&version=1

  According to what you use for malware protection, you may need to disable the product temporarily, do the system restore and then turn the products light up again when the system restore is complete.

  Sometimes you need start your system in Mode safe and so that your protection programs are not running, and then do the system restore.  Tips from Microsoft in some of their articles that if the system restore does not restore your computer, start in Safe Mode, and then run the system restore.  It works for some configurations.

  Note that if you do a Safe Mode system restore, you will not be able to cancel it and there is no option on the System Restore screen for "Undo my last restoration" as you would if you were to restore your system from a normal startup.

  Give these ideas some consideration if they apply to you.

  Sometimes malicious will afflict your system restore to prevent you to find and remove malware.  It would much rather you trick into thinking that you need to repair or reinstall your XP when it is not necessary.

  No matter what you use for protection against malware, I do so and then only begin to solve any problems:

  Download, install, update, and make at least a full scan with these free malware detection programs can solve any problems:

  Malwarebytes (MMFA): http://www.malwarebytes.org/products/malwarebytes_free
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  It can be uninstalled later if you wish.

  The scans by operating clean, reboot, test and we can fix any other issues.

  System Restore is sometimes so afflicted or Restore Points are suspicious, the best solution is to reinstall your system restore.  This will remove the old Restore Points, but sometimes it's the only way to fix a broken system restore.  You don't have to reinstall XP, only the part of system restore.

  That can leave you with your problem of unspecified origin that you hope the system restore will fix (using a system restore is usually not equivalent to fixing the problem though).

• How to restore Windows Vista backup on Windows XP computer?

  I was about to lose my hard drive on a computer with Vista Home Premium. Stored on an external hard drive. Not able to find my Vista rescue cd, I so installed XP Professional I've had. Attached to transfer backup files, but will not transfer.

  Original title: Save transfer problemsproblems

  Hi Marty,

  Windows Vista backup files are in. Disc format hard virtual which is only supported in Vista. You would have to restore them on a computer that is running Windows Vista and then copy the contents of the Windows XP computer.

  See also: back up and restore: frequently asked questions

  How Windows Vista backup uses zip files to store backups (and how to extract the zip files)

• Could not restore Windows 7 after Windows 8 Preview - TM2 version have restore DVD, always fails.

  Hello!  I'm about out of ideas on how to resolve this, so I'll do a summary of what I changed with the machine and then further troubleshooting details on.  The hp touchsmart PC portable individual I is a TM2-1079 cl, product number: WA812UA #ABA.  I got it for the length of 2012, I bought it used another person about 1 year ago now specifically to play with Windows 8, before his release.  Regarding materials real age, I can tell from the warranty information that it was made at the end of 2009, he stated the warranty period was from January 2010 to January 2011.

  Okay, so my story with the OS change goes:
  -> Bought this TM2 in early 2012, ran the recovery partition to wipe it clean from the previous use of owners and he went perfectly well, then a Windows 7 clean installation as if it were new.  I had also made use of an Acronis True Image 2010 boot disk to a hard disk image of the three than other recovery partitions (although I do not understand the freshly installed windows partition 7, thought it wouldn't matter if the recovery could do it's thing right?)
  -> A few days later, I loaded the second of the three Preview versions for Windows 8 above (Customer Preview build I think).   Everything worked well and it doubles starting between the two without problem, as far as I know, the only real made amounted to convert the main partition that Windows 7 was installed on an extended partition and splitting of existing Windows 7 partition everything also 50-50 indoor and extended partition.  She had also replaced the Boot Manager / bootloader which was there before, but once again not surprised.
  -> When the build of the Preview version was released over the summer I did an update from inside windows 8 and all seemed well again.  Change between builds two preview has developed a problem where I could not stop windows 8 without a handful of error boxes poping up to the top, but I'm pretty sure that was unrelated.
  --> More recently about time thanksgiving, I decided to give the laptop to a family member with an archiac office who has had problems and updated factor of old general who in fact does not.   This person is quite unfavorable for change so that everything "Win8-vs-what people are used" comes into play.   I decided to erase the TM2 clean to the BONE it comes with.    Here's where I'm stuck now:

  => Before doing anything I did a just incase, glad I did another true picture of the HARD drive.
  => I have tried F11 to load the recovery partition to see that, because of the bootloader be tampered with by Windows 8 it is really not to the HP recovery partition more while it is still on the hard drive.
  => Captures the image of hard drive since the beginning of the year with the partition recovery on it until windows 8 hit the machine, cleaned the hard drive completely, restored the disk image.   I could now enter HP recovery fine but...
  => I got a dialogue mistake right off the bat, saying that the recovery partition could not install and insert me CD 1 of recovery of education software.  Well I never did the dvd myself with the single use burning star when it worked so that is out and I did not buy the disks on the HP support site.   At this point I'm stumped, but why the recovery partition cannot install despite the computer load up in recovering very well.  For example, command prompt in the Windows PE environment is functional and all files seem to be present.   Maybe some checks as the recovery partition is not pirated could have been triggered by hard drive imaging, I'm really not sure?
  => I did then used the image of HARD drive, I had just created before trying it and restored the other copy of the reader (bootloader altered Win8, Win8 version preview, win7, the inaccessible and all recovery partition).   Windows 7 and 8 - RP can still start.   Google a bit on the recovery partition key (F11) is dirtied by Windows 8 and came to find that I had to only salvage value as the partition "Active" so he can start.  Sure, I have to start but I'm running into the same issue, where the real recovery partition loads but now refuses to start the process of restoring without HP dvd.  Because I know that for some it worked months ago I guess that once more, because I ended up restoring this version of the recovery partition it may also declared himself tampered with... great.
  -Online planned what to do a little and then finally just ordered the DVD from HP in December, I had specifically recovery DVD for my model and they weren't from HP directly, not second hand on ebay or another person.  Wasn't really that bad, $16, very reasonable price.  Should be just, legit OEM DVD to use?  Nope...
  => Came the DVD.  Two main recovery disks and a third for applications and drivers.   Start with disk one and he says is formatting the drive how he wants (good, I love it so far), copy all the content of the three disks on the hard drive and starts his reboot and install cycle.    Restarts a handful of times, you can tell that well after the copy of the content of the any disk and installing windows.  You see the logo Windows 7 boot a few times and even the standard background 'prepare your things' which is similar to the Windows 7 login screen.  The screen becomes certainly as far as the driver proper (and others I guess at that time here) such as changes in native resolution for LCD of the TM2 towards the end.
  -Online all of a sudden on the 3rd or 4th (I think) reboot of windows setup begins for a while then said stop, it restarts and it is back in Windows PE installation of recovery again (this time from the hard drive, not the DVD) and says that it has failed to restore and offers to start over from the beginning.

  This is where I am stuck.  The recovery Partition died on me post-Windows 8 and the official HP recovery DVD fail to me (and curiously they you apparently miss you in all stages of restoration windows 7, well after the DVD themselves are are most read from).

  > Question 1: is the "self-destruct" HP recovery partition if he gets imaged hard drive imaging software and restored?  I can confirm mine worked fine and then died after after crossing Acronis True Image.  Another possibility is that perhaps there is a certain ID or the tattoo of the hard disk or specific partitions that was lost when Windows 8 put his recent bootloader into the machine or lost of Acronis?  It's always the hdd oem supplied with the computer, it has not been turned out.
  > Question 2: are there known issues with the official recovery of Windows 7 DVD s for an end TM2 2009 1079 cl?  I also know the recovery of Cyberlink software fix / preinstall disc and tried this with results that were not different in without it.  That said, my machine has the version of the recovery software Cyberlink, I read something as software from 3 different companies for recovery depending on the period of time the laptop was manufactured and sold.
  Reference: [ http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&softwareitem=pv-80183-1 ]
  > Question 3: clearly asked, what now?  Another thing to try or I have to go find a disc of windows 7 RTM and snatch all the zippers of all pilot?  (Quite hoping to avoid this, I'm actually curious enough to really understand what happened here and that will work he answered nothing.)  hehe).

  Perhaps of things this way: some research led me to believe have the WLAN switch off at the beginning of the recovery causes the driver to flip out (and win7 seems indeed dropping dead during the last steps of the installation of the driver) however it is not possible it seems to activate the wireless card 'on' before that point.  Switch do even when active state.   As I have already mentioned the recovery of Cyberlink software patch has no effect on things.   No parts have never been amended in this machine, the original hard drive, the wireless network card, modules, ram ect.   I doubt that the motherboard bios / firmware has never been States machinery, update is revision F.02.

  I have at my disposal:
  Much time, in fact, hense why I really want to know what has happened and do not use the disc of Win7 RTM.
  * disk hard recovery HP before addressed Win8 image machine.

  * disk hard recovery image after Win8 and a little bug, but still bootable Win8-RP.
  * The correct recovery DVD for my laptop HP-directed, ordered recently (December 2012).
  * Enough confidence to play with score editing tools would it be a suggestion, never really used much outside of gparted on discs live linux however.  In view of the current state of the machine there is nothing to lose much more than to risk.

  Sorry for the wall of text!  I love being very detailed!

  I actually had, pretty much on a whim of 'eh, might as well try it' too!

  So I told him earlier that it seemed obvious that most of the recovery completed well, something just kept arye until reset all cycles of the overall configuration process.   Seemed as if drivers were causing a problem because the display driver had obviously just finished installing a few moments before the final restart dead-end.  There was a lot of forum discussions there on different models of HP laptops, who need the wireless card to be placed in 'market' or restore might fail completely, I tried but the TM2 does not really allow you to change the WLAN State of 'off' when the operating system has already recognized (as in bios menus and windows install ", it stays just off even if you hit the switch).

  I decided to try pulling the mini-pcie card out of the machine completely and from configuration on and... It worked!  I had throughout a fresh Windows 7 and he even recreated my recovery partition correctly!

  Check in the C:\SwSetup\ directory after the installation was made, I found all the other drivers and a folder called 'WLAN', which was empty.   I guess that means if recovery is not material, then they choose even not copy the data to a certain device driver.   Because it was not present, everything that's wrong with installing drivers during recovery wireless cards never crashed the recovery all!

  I wonder if there isn't something wrong with the wireless card in my TM2 in all honesty.  I had a problem with it along since I got a year ago in this radius of reception was terrible and if I went that areas of the room of the wifi point he was likely to win.   Having said that it worked then I ignored it before.   Maybe the card is gone belly up and install recovery is not just installation to recognize errors in nonlethal pilot since the WIFI network?  He would fit with other peoples problems when WLAN is turned off as well at least.

  ---

  As a separate note, since the new year I've updated my personal machine (a HP DV6T) for one SSD and (without erasing my old HDD), I decided to try acronis imagery on this cover of machines and other partitions under Windows 7 itself for the SSD.   Of course, the same question appeared, recovery would not launch without the DVD.   Apparently Acronis True Image just cannot successfully restore HP to an image of partition recovery.   I don't pretend to know why but while the real partiton returns through restoration and environmental WinPE is running the effective recovery certainly does not aftering through an image .tib in the case of two separate HP machines.

  ---

  (For googlers who think so), these are two of the three questions, which I came across while doing this resolved and everything that I'm going to worry.

  > Windows 8 Preview mess with bootloaders, breaks recovery, I didn't figure out how to restore it.
  > Do not rely on an image of hard disk from the recovery partition, even if you can restore the partition and it opens to black recovery menu window it can still fail and ask the recovery dvd.  The recovery partition disk imaging is risky!

  > If your HP recovery (partition or dvd, or another) dies near the end of all this and turning on/off WLAN is not helping, try ripping off the mini-pcie for the restore time card and then reinsert once you return to an operating system clean, everything worked for me!  For reference, I don't know what model of wlan card that is exactly, but it's a Broadcom 802.11n adapter (HP alternative number? Not sure) SPS: 593837-001.  The driver will not be C:\SwSetup\ after the installation as the dvd won't copy out but plug in ethernet, windows update finds it easy.

• Backup and restore - Windows 7

  Apology, long story - cannot shorten it, otherwise I'll think I forgot something.

  I just rebuilt my PC, reinstalled Win 7 on a SSD and restored everything (or so I thought) all my data on a separate HARD disk.

  When I look at the data I find loads of it is missing. I'm afraid I don't know the reason but want someone more competent than me confirm my fears, or better yet, tell me differently!

  Before getting the SSD, I got a 1 TB disk partitioned in C: for windows and programs, as well as the d: for data. The data were vast dating back to the years whose number of Paperport files.  There's always a curiosity, perhaps caused by transfer of data between several computers and HARD drives older over the years, I could never "see" all of my My Documents Paperport files, but only by going to desktop (or Windows Explorer) and open D: > users and then my user name. will in this case showed my a whole much fuller of the files and folders to go through My Documents. I don't think it was to do with me do not include them in the library because I believe that I had added things to the library as he was transferred, but I could be wrong.

  I think that it is possible that I had managed to create two sets of users, possibly by copying my Windows XP user account and the game 'full' of files (including all my Paperport documents) was not really visible to my 'real' user account in Windows 7.

  I always kept backups (including Images of the system) using Windows backup on the external (USB) 1 TB HARD drive. (G)

  I created originally the SSD by cloning my C: partition to the new SSD. (I've always built my own PC and Windows 7 on the HARD drive was an OEM installation and I had no right, then disks). It worked well, but I've always had a message on startup asking to choose the "Recovered" version I wanted to start. (It is possible that during cloning, I managed to install windows twice).

  I finally decided to put things away to the top (and I had gotten my Win 7 discs at hand). I did a complete (so I thought) backup of my C: and D: drives on a brand new 1 TB HDD internal (e) I had installed as the old USB has been slow (and complete) in case anything went wrong. I had installed a new, pure on the SSD and then (stupidly in retrospect) re-partitioned disk HARD original 1 TB in a single partition D: and "restored" the data from the new E: drive on the re-partitioned D: drive and put all Windows sites to point to the drive D: for My Documents etc. That's when I found that all the stuff that I previously had access via the workstation > users > Stuart was missing. (Why oh why didn't I just use the new E:drive as the data Windows drive and copy the stuff up drive D: when I saw all this and work!)

  OK I though all is not lost - I have the original backup to disk USB g: so I restored from there. Same no result - no files Paperport, nothing of what I used to have access via my computer > users > Stuart.

  So no data only backup Windows 'official' user account backup and ignore anything else on the D: drive? Was I wrong my backups? Are my data hidden somewhere that maybe a full restore of the system of the E:drive be recovered? I don't think, but I hope.

  Advice, suggestions, commiserations welcome.

  Hi Stuart,

  Thank you for visiting Microsoft Community and we provide a detailed description of the issue.

  As I understand it, the problem with the backup of the data on the system.

  Of course, I understand the concern.

  I suggest refer you to the articles below and check if that helps.

  Backup and restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows/back-up-restore-FAQ#1TC=Windows-7

  Restore files from a backup

  http://Windows.Microsoft.com/en-us/Windows/restore-files-backup#1TC=Windows-7

  Note: The article above will help you restore backed up version of the files that are lost, damaged, or changed accidentally. You can also restore files individual, groups of files, or all files that you have saved.

  Recovery and data backup

  https://msdn.Microsoft.com/en-us/library/bb727010.aspx?f=255&MSPPError=-2147217396

  I hope this information is useful.

  Please let us know if you need more help, we will be happy to help you.

  Thank you.

• How to restore Windows 7 default services

  Original title: how to restore Windows 7 default services

  Help me!!!

  Hello

  2 methods to reset Services - 1. 2 check them manually. Reinstall Windows (or go back to get out of)
  the State of the check box).

  1 reset Services to default values

  Windows 7
  http://www.blackviper.com/2009/01/13/black-vipers-Windows-7-service-configurations/#more-2989

  Windows 7 Service Pack 1
  http://www.blackviper.com/2010/12/17/black-vipers-Windows-7-Service-Pack-1-service-configurations/

  ================================================================

  2. replace or go back to out of box state.

  You mean reinstall the OS completely? If you have the Windows 7 DVD you can do however
  don't forget to completely backup your data off the drive, and you need to reinstall your programs. If you
  don't have Windows 7 disks, you can buy them in your machine to cheap system. If you don't like
  on existing programs then you can do a complete new installation - just select the format options
  which erases the entire disc (This erases all data as well).

  Some system manufacturers use Partitions of recovery as well as other methods to allow you to return
  Back to a completely new installation. So check with your system manufacturer to see what options
  you need to do - and certainly do - just a question of the process of the
  Manufacturer of the system put in place for you.

  How can I perform a clean Installation of Windows?
  http://pcsupport.about.com/od/OperatingSystems/f/clean-install-Windows.htm

  How to do a clean install with Windows 7, this wipes ALL programs and data on
  http://www.SevenForums.com/tutorials/1649-clean-install-Windows-7-a.html

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to do a Custom Installation of Windows 7
  http://www.SevenForums.com/tutorials/20146-custom-install-Windows-7-a.html

  How to do a clean install with a Windows 7 upgrade Version
  http://www.SevenForums.com/tutorials/31402-clean-install-upgrade-Windows-7-version.html

  How to do a upgrade install Inplace of Vista to Windows 7
  http://www.SevenForums.com/tutorials/1818-upgrade-install-Windows-7-a.html

  Installation and reinstallation of Windows 7 (upgrade - store programs and data or New Installation)
  which removes the)
  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  ========================================

  If you do a repair disk - this helps to repair Windows not re-install.

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  ======================================

  If necessary:

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Why do I get restore window when opening firefox since the update

  Why do I get restore window when opening firefox since the update. I don't want to restore but it appears every time instead of my homepage as shown

  A likely cause is that you first close all Firefox Windows and then close the Firefox application.

  Some noted that closing of Firefox (Firefox > Quit) while the browser window is always open works for them.

  • Bug 845681 - close all windows and abandonment of Firefox eventually led to about: sessionrestore to appear the next time you start

  (please, do not comment in the bug reports: https://bugzilla.mozilla.org/page.cgi?id=etiquette.html)

• Reinstalling Windows XP question

  I have a Dell Inspiron 5100, I need to reinstall Windows XP Home Edition, but I do not have a Dell Windows XP disk, however I use a gateway Windows XP Home Edition disk instead?

  PS: I have all the divers for the Dell just need to Windows.

  None does not Bridge disc to restore the dell however the dell should have built in option resrore, which uses a partition on your hard drive to restore windows:

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?c=us&CS=19&l=en&s=DHS&docid=DSN_181316&isLegacy=true

  Good luck

• Restore Windows XP to factory settings

  I have a HP Compaq d220 and I want to restore Windows XP to its factory setting, the problem is I can't find the CD anywhere, but I still have the license number. What I still have to buy windows again or can I download it? I tried the site HP and Windows, and I can't find anything.

  Some Compaq computers have a restore partition hidden on the hard disk that you can use.  Restart the computer and as soon as something appears on the screen, press the F10 on the keyboard.

  Another possibility is to wait until Windows XP is running and click Start > all programs > Tools HP > HP PC System Recovery .

  Back up your important data on an external first files!

• How to run system restore windows xp

  trying find out how to run the system on my desktop dell restore...

  trying find out how to run the system on my desktop dell restore...

  =============================================
  See the following article:

  (306084) how to restore Windows XP to a previous state
  http://support.Microsoft.com/?kbid=306084

• After got rid of the virus Fake system restore Windows, how can I restore my hidden files, folders and shortcuts?

  original title: restore the false system Windows Virus

  After got rid of the virus Fake system restore Windows, how can I restore my hidden files, folders and shortcuts?

  It is always sensible in this situation to achieve a malware check

  Start the computer in safe mode with network and download and install Malwarebytes (free version for individuals only), updated definitions and run in safe mode. Disable other security software while you do the analyses.

  http://www.Malwarebytes.org/

  Download and run SuperAntiSpyware (Free Edition)

  http://www.SUPERAntiSpyware.com/download.html

  Some malware is installing the entries of proxy server redirecting internet connections. If you encounter this problem step 2 see in the following link:

  http://www.myantispyware.com/2011/02/21/how-to-remove-Internet-Security-Essentials-virus/

• After backup files and restoring Windows XP, I can't open the files backed up.

  After backup files and restoring Windows XP, I can't open the files backed up. The files are password on a user account. I know the password. But the message received when you try to open them is: access is denied. Drag / drop the files in 'Shared files' result in the same message. I know that the files exist, because when I open backup and browse for them, they are displayed. Is there a method to open? I have Windows XP Media Center Edition, Version 2002, Service Pack 3 update. I tried to back up the files with backup of backup, but it does not work.

  Hi error,.

  I suggest you follow the article in the Microsoft Knowledge Base and check.

  How to capture a file or a folder in Windows XP

  http://support.Microsoft.com/kb/308421

  I hope this helps.

• Computer crash xp pro have attempted to use the console to restore windows, but im not a good enough geek to type orders correctly is a more automated way to boot from the CD to reinstall the CD?

  Computer crash xp pro have attempted to use the console to restore windows, but im not a good enough geek to type orders correctly is a more automated way to boot from the CD to reinstall the CD?  There is a lot of argument about deplacerb help pages the correct process and commands to use I don't want to do more damage.

  Thank you

  Hello

  I suggest you to visit these links and check if it helps:

  How to install and use the Recovery Console in Windows XP:
  http://support.Microsoft.com/kb/307654

  Description of the Windows XP Recovery Console for advanced users:
  http://support.Microsoft.com/kb/314058

  How to perform an upgrade on the spot (reinstallation) of Windows XP:
  http://support.Microsoft.com/kb/978788

  Check if that helps.