restore windows 8 for the original settings

Similar Questions

• Cannot reset windows 8 for the factory settings and get an error 0xc000000f, after system startup.

  * Original title: I can't seem to be able to refresh, reset or reinstall my windows 8

  I have a laptop Asus s200e

  I would I have tried to reset my windows 8 to the factory settings and the thing is he always tells me that I have missing files and I need the installation disc. That is, that I don't have an installation disc because it is preinstalled and I tried to start up and I got an error 0xc000000f.

  Please help me

  Hello

  Thanks for posting the query on Microsoft Community.

  Am sorry to know that you are unable to boot the system, and you get an error: 0xc000000f.

  This error can occur if some files are corrupted, or if you have made changes to your computer.

  Did you change to your system, the hardware and/or software, before this problem?

  You can try to restore the computer configuration by clicking on the link below.

  Windows 8-How do I restore the system to the factory default settings, if I can't get into the system?
  http://www.ASUS.com/support/FAQ/1008226/

  Note: If you reset the computer to factory settings, it will remove all applications, programs and drivers that you have installed. If you need to reinstall all applications and programs, once you reboot the system.

  If you still have the same problem, you must contact the Asus technical support. Here is the link: http://support.asus.com/ContactUs.aspx?SLanguage=en

  I hope this helps. If you still have problems with windows know please let us.

• How to restore windows ME for the first day that I pay for it.

  1. I try to restore windows, but it will do. I have a saying massage low disk he had to have some SPACS and won't do a thing.

  Make sure that you have backed up everything you want to record.  When installing, it gives you the option to format the drive?  If so, select this option and it clears the record of everything and give you plenty of space to install.

  If you have already saved the data you want to save, and then delete the data.  Do a full of all disk cleanup.  Uninstall 3rd third-party programs that you had added to the system - as much as necessary.  It, until you create enough space for the installation works.

  I don't know if you can boot from a Windows ME disk to access the recovery options (I never really used this version).  If so, try to do this, and then select command prompt in service options (if it offers this option) and use to format the hard drive completely. That erases everything and you should have enough space to re - install.  If this is not the case, the method above should work later depending on the amount of space is required.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Had to restore my PC to the original settings and now I am unable to install additional MS updates.

  ORIGINAL TITLE: Service pack edition

  Had to restore my PC to original - XP Pro version 2002, SP2 settings - and now I am unable to install additional MS updates.  Mr. Fix - it will not work with SP2, windows update is turned on but does not work. What can I do to install the latest service packs?

  Steps to take before you install Windows XP Service Pack 3

  http://support.Microsoft.com/kb/950717>

  For Windows XP Service Pack 2 installation procedure

  http://support.Microsoft.com/kb/875364>

  UTC/GMT is 12:17 Friday, June 29, 2012

• in windows 7 How to restore the security settings for the default settings? __

  in windows 7 How to restore the security settings the default settings?

  Hello

  This will reset all security settings in Windows 7 by default.

  Start Menu - type in the search box-> find CMD in top - click right on - RUN AS ADMIN

  Type or copy and paste it at the command prompt:

  secedit/configure /cfg %windir%\inf\defltbase.inf/db defltbase.sdb / verbose

  Press enter

  -------------------

  Other methods:

  Restore Windows 7 to default security settings
  http://www.AddictiveTips.com/Windows-tips/restore-Windows-7-to-default-security-settings/

  Restore the security settings to default Windows with Rizone security restore
  http://www.thewindowsplanet.com/305/restore-Windows-security-settings-to-default-with-Rizone-security-restore.htm

  Check this free utility:

  Ultimate Windows Tweaker, a Tweak UI for Windows 7 & Vista
  http://www.thewindowsclub.com/ultimate-Windows-Tweaker-v2-a-Tweak-UI-for-Windows-7-Vista

  -----------------------------------------------------------------------

  More information:

  Windows 7 security enhancements
  http://TechNet.Microsoft.com/en-us/library/dd548337 (WS.10) .aspx

  Windows 7 security enhancements
  http://TechNet.Microsoft.com/en-us/library/dd560691.aspx

  Steve Riley discusses the security features of Windows 7 to the RSA
  http://www.Microsoft.com/video/en/us/details/3bce5c98-CE93-46b5-9a1a-3a2914059ad1

  Windows 7: explore new and improved security features
  http://www.Microsoft.com/security/products/Windows7.aspx

  Windows 7: security and Protection
  http://TechNet.Microsoft.com/en-us/library/dd571075 (WS.10) .aspx

  A Guide to Windows 7 security
  http://www.PCWorld.com/businesscenter/article/171979/a_guide_to_windows_7_security.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• WARNING: Your DNS settings have been changed. Accept changes or restore the original settings?

  WARNING: Your DNS settings have been changed.  Accept changes or restore the original settings?

  This is the error message that appears every 3 minutes.  If I click on accept and then I can't get back on the internet unless I reboot.  If I accept the restoration, so I'm OK for the other 3 minutes.  Why is that happening and how can I solve the problem?  (The computer has always been setup for obtain an IP and DNS address automatically.  I have checked the properties and that has not changed).

  Try this:

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  See you soon.

  Mick Murphy - Microsoft partner

• Restore the system to the original settings

  I'm trying to restore my computer to original settings to overcome a Trojan horse that has hijacked my Internet browser. When I use the restore option, it only allows me to come back in 3 months and then tells me that the parameters are then the same as today. How to restore original system checkpoint system - for when I bought the computer in March 2003? Thank you much for the help.

  Hello

  If your dining options offers more restore points, then there is no chance of working with this function.

  So if you want to retrieve the original settings, you must recover your system with the supplied restore CD.

  Good bye

• Error - because of unidentified problem, Windows cannot display the firewall settings

  Original title: Firewall Windows are not accessible to stop?

  Recently installed MSE.  Now, I can't launch Samsung Allshare to view files on the Samsung TV.  Firewall Windows is not accessible to stop temporarily so that Allshare can run.  All that is shown is "Because of problem not identified, Windows cannot display the firewall settings."  It seems that MSE has hidden and I can't determine how to communicate with them without going through the process of uninstalling and re-installing.

  Hello

  1 Windows operating system you are using?

  2. when exactly you get the error message?

  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up the registry, see the link:

  Back up the registry

  http://support.Microsoft.com/kb/322756

  See the article and check if that helps:

  You cannot start the Windows Firewall service in Windows XP SP2

  http://support.Microsoft.com/kb/920074

  If the problem is not resolved, please provide more information to help you best.

• "An undentified problem, windows cannot display the firewall settings" during a turn on the firewall.

  Original title:

  Windows firewall error desabaled

  I have windows xp - help mechanic iolo - my firewall is deactivated automatically - when I click on activate up to a mistake pop [there was a firewall of windows activation error] and then I click on the top of the pop - windows firewall - Open button error [due to an undentified problem, windows cannot display the firewall settings].

  my firewall won't come to help me.

  Hello
  1. You did changes to the computer before the show?
  2. What service pack is installed on the computer?
  Method 1:
  You can run the fixit from following link and check the issue:
  Diagnose and automatically fix problems of Windows Firewall service
  http://support.Microsoft.com/mats/windows_firewall_diagnostic/en-us
  Method 2:
  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up the registry, see the link:

  Back up the registry

  http://support.Microsoft.com/kb/322756

  See the article and check if that helps:

  You cannot start the Windows Firewall service in Windows XP SP2

  http://support.Microsoft.com/kb/920074
  
  

  Let us know if it helps!

• A virus wiped my computer needs now Windows reactivated while the original key does not work!

  One of the worst virus I've never erased from my computer and caused a huge problem.

  After restoring the computer to the original settings window asked to be activated.

  After the product key that is on my computer, he said it was not valid and I might be at risk of fraud. The problem is that it is this computer that previously used!

  What should I do?

  To analyze and solve problems for Activation and Validation, we need to see a full copy of the report produced by the MGADiag (download and save to the desktop - http://go.microsoft.com/fwlink/?linkid=52012 ) tool
  Once saved, run the tool.
  Click on the button continue, which will produce the report.
  To copy the report in your response, click the button copy in the tool (ignore the error at this stage), and then paste (using r-click and paste or Ctrl + V) in your response.
  -* in your own thread *, please

  Please also state the Version and edition of Windows cited on your COA sticker (if you have one) on the case with your machine, but do NOT quote the key on the sticker!
   http://www.Microsoft.com/howtotell/content.aspx?PG=COA

• Clueless users accidentally restore their machines to the factory settings. How is that possible?

  I had one up to four cases where users have restored their machines to the factory settings. These users know nothing about computers and appear to be shocked as much as me on the fact that it has been restored. By default, all windows restore features are disabled by group policy which covers everyone. This means that they are using the Dell restore feature on their machines and unknowingly restore their systems. It only happens on newer Dell computers that we began to receive that comes with Windows 7.

  The last of them was the straw that broke the camels back. She said she kept tripping his power strip that caused here system constantly crash. I don't know who got the windows of catering for here to push blindly. She does not deny that she does nothing wrong and now trying to blame us (IT Dept) for the system being reset.

  Is it possible that the System Restore automatically after constant incidents or the user must press a button to get there? Questions that you need to restore, I see that there may be a restoration to a simple pressure to default settings. Or am I wrong?

  I found as follows to disable the system restore feature Dell and will apply to all new machines. I searched for examples of what happens to others but have not turned to the top of any "accidental restores.

  wesodo,

  System Restore should not be the problem, something has caused the shutdown of the system. Try to run full diagnostics, press F12 on startup and report to the back of any error message.

  Since you are the it Department, maybe delete the original image, given that you should have drives for the operating system for each system. If no disk were made, the attempt to read...

  Windows 7 - IMPORTANT Windows 7 to create backup discs

  I guess that when the system crashed, he triggered the problem with starting the system. The person should have come to you at this moment there, but didn't. Then they tried to startup repair, when they were invited, then it did not work, then, you are prompted to restore the original image system. If the original image is deleted, then they will have to come to you for help.

  Rick

• Turning or turn off the features on my HP computer that has Vista Premium 64-bit; you need the original settings?

  I need the original settings for the correct positions of what blanks or who checked;  I tried to solve a problem with the installation of turbo tax and had problem with .net 3.5? -made some changes and now my printer is not working and so on!  I just want to put them back where they should be;  I bought the Windows 7 upgrade, but I'm afraid to try to install it before you can resolve this problem.  Help?

  This is a general guide to the features of the program & http://www.vistax64.com/tutorials/181884-programs-features-disable-enable.html

  If you have a real cd MS Vista you can allways repair your installation.

• Recently changed the screen resolution. Said Yes when asked if I wanted larger icons on the new resolution. You want to return to the original settings.

  Sytem restore tells me that no changes.  Which is bullshit as when I went back to smaller resolution icons have been spaced more far and the gray area at the top of the screen did not return to small.  This means that I have to use the first symbol to minimize, and then right-click to get on the net.  The square and the cross are off the screen.

  Hello Elenoe,

  Thank you for visiting the Microsoft answers community.

  Not positive I understand exactly what you are trying to accomplish, however for the two questions you have with the larger icons and minimizing Internet Explorer I'll give you some steps to resolve.

  Large icons
  
  -Right-click Law Office > click Properties > click on settings tab > click on advanced > click on the general tab (if we by default)
  -Under view > compensates for the ppp settings.

  Internet Explorer minimizing
  
  From your description, it sounds like your Internet Explorer is beyond the edge of the screen.

  -Right click on the icon to the taskbar for Internet Explorer > click enlarge

  Maximize your screen to the right size?

  If the minimal State, you can't get the edges in order to size the window try:
    
  -Right click on the icon to the taskbar for Internet Explorer > click size > press your up, down, left, or right arrow key to select which edge you need to move.

  For example, if you move the right edge: press your right arrow button > by using the left and right arrow keys move the right edge of the window, and when finished press on enter

  Hope this helps

  Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Is there a way to re set Lightroom to the original settings, I've been playing with it and got somewhere that I don't know how to get out of... not particularly computer savvu

  Is there a way to re set Lightroom to the original settings, I was playing with it and has gotten, somewhere, I don't know how to get out of. Not very computer savvy

  For starters, stop Lightroom

  On Windows, do the following

  Click the Windows Start button and in the search box type: -.

  %AppData%\adobe\lightroom

  Then press Return\Enter

  This will take you to the folder Lightroom (see image below)

  Select the Preferences folder and click on delete to send it to the Recycle Bin.

  Close the Lightroom folder, and re-start the Lightroom program.

  

• How to reinstall Windows XP without the original diskettes

  Anyway is to reinstall windows xp without the original installation CD that is lost?

  Hi bob e_771,.

  ·         Why you want to reinstall Windows XP?

  ·         What question are you faced with Windows?

  No, it's not possible reinstall Windows XP without the installation CD original. You must have the CD for reinstallation.