Restrict access to forms or areas?

Similar Questions

• restricting access a page...

  I followed a tutorial for Dreamweaver restrict access to a page on my site that will contain sensitive data. I have a login form using the login server behavior. It works very well - to direct me to the page appropriate for successful and failed logons. I have the connected mySql database and uses php.

  The next step, limiting access to a page does not work. I select the html page, add the server behavior in DW, select username password. He created the php page. Update is made to the login page for now toward the restricted php page, but even on a successful login, I am sent to the login page failed. I looked on several published Adobe articles on this and I am confident, that I followed the steps.

  Is there a php configuration setting required on my server? or is there a step I'm missing in dreamweaver? anyone with some insight on where to seek a solution, your help is greatly apprecaited.

  soulfunkifiedjazz wrote:

  even on a successful login, I am sent to the login page failed.

  Read what you just wrote. It is not sensible. If the connection is successful, you will be sent to the page successfully. The fact that you are sent to the page failure means that the connection has failed.

  What you need to do is to find out why the connection fails. No doubt you are convinced that the username and password are correct, that's why you think that the connection was successful. Because it worked without limiting access to Page Server behavior, it sounds as if there is no problem with the database connection or the login user server behavior.

  The most likely cause is that the session variables are not stored. Check your PHP configuration by viewing the output of the phpinfo() function. Scroll the page to the session section near the bottom. Make sure that the session support is enabled. Also, check the value of the session.save_path. The record that there are listed there?

  Another thing to check is the display_errors value in the central section of the configuration of PHP page. Make sure that it is. There could be a problem with the headers have already been sent (see http://kb2.adobe.com/community/publishing/505/cpsid_50572.html for an explanation).

• BEFSX41 - Blocked Services in restrict access tab is grayed out

  Blocked Services restrict access tab is grayed out, so I've updated to the current version of the firmware:
  Release date: 14/08/2009
  Current firmware: Version 1.52.16.4
  Product part No.: BEFSX41 v1/v2/v2.1

  Hung services is always grayed out.

  I have tried Linksys chat, but they do not help this serial number is "out of warranty". So I'm looking a way enable the blocked Services feature. .  Does anyone know how to activate it?  Thank you.

  Are you sure that you create an authorization rule and not a deny rule. Hung services are available that allow for rules, i.e. you want to allow internet traffic except some blocked services. A deny rule will block all internet. In the demo UI I choose blocked services if I select "allow".

• Restricting access to Internet WRT160N problem

  I use router WRT160n.

  I used the access restriction to restrict internet access for 12-05:30 every day.

  during 12-05:30 every day, when I use my laptop to access the internet by wifi, the site is blocked, and internet access is limited. This works correctly.

  However, when I connect the lan from my laptop to the router and try to access the internet, I can browse the site normally. I can browse google, yahoo and all Web sites. in this case, the access restriction cannot funciton properly.

  My question is:

  Why restricting access can work when I use the lan cable to connect to the router?

  How do I fix this so that the router can block all access to the internet, even when I use the lan cable to connect to the router?

  Thanks for your help!

  If you are using an ethernet cable, your computer uses a different MAC address and a different IP address on your local network. Basically, for the router, it looks like a completely different computer. You need to add the IP address or a MAC address restriction policy.

• my wireless connection says "restricted access" no network connection. I used the same key code to get my other computer online

  my wireless connection says "restricted access" no network connection, I used the same key code to get my other computer I can have up to 5 computers online at the same time online.

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello

  This means that the computer cannot connect to the router.

  Try this process.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  Make sure that if there is Wireless Utility a utility vendor is not running with the native Windows wireless utility.

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Stack TCP/IP work should look like.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.

  The physical address is MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.

  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

  ---------------------------------------------------

  Above everything is OK, you must be able to connect to the router.  A window that says connected does not mean that you are really connected. Connection to the router means that you can enter the IP of the router base in an address bar in one go, being able to connect and configure the router menus see. If it is not connected in the log to router from any computer that can connect to the router wirelessly with a wire, disable wireless security, (make sure that the wireless SSID broadcast) is on and try to connect with no. wireless security.

  --------------------------------------------------

  I really checked and configured every thing and it doesn't work.

  Software firewall application that is not configured to allow local traffic (between the computer and the router is also a possible problem.
  some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Restrict access to the administration to WLC5500

  Hi all
  We have configured all our devices in WLC5500 with a service port interface, which helps us to management and monitoring. Given that in our situation, the management interface is accessible from enterprise networks, this means that desktop clients have the ability to achieve the WLC logon screens.

  Is the only way to restrict access to ports to place an on the management interface access ports, or am I missing a GUI/SSH secret command / button that will allow me to disable or limit the management of devices through the management interface?

  In which case I'll have to use an ACL on the WLC management interface, are there any known issues with denying them access to the ports http, https, telnet, ssh and LWAPs trying to connect?

  Thank you
  Leon

  You have hit it on the nose.  You must have an ACL that blocks the terminals "non-admin" to http/https/telnet/ssh/snmp on the device.  as long as you have the permit ip any at the end of the ACL, you should have no problems, or explicitly allow udp 5246/5247

• Restrict access VPN client on IOS 12.4

  I'm trying to restrict access to the client VPN ports for the specific customer VPN leading to a router in 1841 running IOS 12.4 (9).

  With versions of IOS of pre-12, 4 that this could be done by using the ACL on the outside, but with version 12.4, it seems that VPN connections are allowed even without a declaration of "permitted" in the external ACL (similar to "sysopt connection permit-ipsec" on the PIX).

  Is it possible to limit the VPN traffic on the external interface of the client?

  See you soon,.

  Christoph.

  Hello

  The feature you're looking for is called:

  Access check crypto on plaintext packets

  Check it out in the Configuration Guide for Cisco IOS, version 12.4 security

  In sort, set the encryption to your ACL post, go into your crypto-map and apply it with:

  set ip access-group {access-list-number | access-list-name} {in | out}

• IPSEC RA - activate crossed but restrict access to the web

  ASA5520 8.2 (5) 30

  Greetings,

  I have an IPSEC RA strategy that has implemented to tunnel all traffic (no split tunnel) by the ASA (which ends on the external interface).  I need to be able to allow VPN users to access a web page (crossed) thesesame on the external interface.

  ++++++++++++++++++++++++++++++

  Here are the current settings:

  Group Policy Admins L internal

  attributes of Group Policy L_Admins

  value of server WINS 172.16.0.33 172.16.0.9

  value of 172.16.0.33 DNS server 172.16.0.9

  VPN-idle-timeout 60

  VPN-session-timeout 480

  VPN-value filter-admin-l

  IP 172.30.4.0 allow Access-list l-admin-test-filter extended 255.255.255.252 host 172.16.0.33

  IP 172.30.4.0 allow Access-list l-admin-test-filter extended 255.255.255.252 host 172.16.0.9

  IP 172.30.4.0 allow Access-list l-admin-test-filter extended 255.255.252.252 172.16.1.4 host

  IP 172.30.4.0 allow Access-list l-admin-test-filter extended 255.255.252.252 welcome 172.16.1.2

  access-list extended l-admin-test-filter permit ip 172.30.4.0 255.255.252.252 10.24.0.0 255.252.0.0

  IP 172.30.4.0 allow Access-list l-admin-test-filter extended 255.255.252.252 the host 172.16.0.233

  Protocol-tunnel-VPN IPSec

  Split-tunnel-policy tunnelall

  value by default-field IHI.local

  type tunnel-group L_Admins remote access

  attributes global-tunnel-group L_Admins

  address ili_global pool

  PhoneFactor authentication-server-group

  Group Policy - by default-L_Admins

  IPSec-attributes tunnel-group L_Admins

  pre-shared-key *.

  ++++++++++++++++++++++

  Crossed is not currently enabled, so I guess I have to add:

  permit same-security-traffic inter-interface

  and (I guess)

  mask IP local pool l_admins 172.30.4.1 - 172.30.4.2 255.255.255.252

  Global (outside) 1 interface * PAT IP

  NAT (outside) 1 mask 172.30.4.1 - 172.30.4.2 255.255.255.252

  But from there I don't know how to restrict access to a single external IP on the web on port 80.

  Hello

  Enter the correct command to permit traffic and the same interface of leave is

  permit same-security-traffic intra-interface

  The command you posted allow traffic between 2 different interfaces that have the same value of 'security level'

  permit same-security-traffic inter-interface

  What about PAT Dynamics for Internet traffic

  If you have already

  Global 1 interface (outside)

  Then you will need the command "nat" for the VPN pool

  NAT (outside) 1 172.30.4.0 255.255.255.252

  In what concerns the control of Internet traffic, should not be able to simply add this destination IP address to the VPN filter ACL you have ever used? I mean the ACL named "l-admin-test-filter".

  For example

  L-admin-test-filter access list note allow the external server connection

  access-list l-admin-filter-test permit tcp 172.30.4.0 255.255.255.252 host eq 80

  access-list l-admin-filter-test permit tcp 172.30.4.0 255.255.255.252 host eq 443

  access-list l-admin-filter-test permit tcp 172.30.4.0 255.255.255.252 host eq 8080

  -Jouni

• Using filters Essbase to restrict access to OBIEE dashboards for multiple users

  Hello

  You can use Essbase filters to restrict access to the data in OBIEE dashboards so that users with no access to specific members are not able to see all data for multiple users.

  Any suggestions on how to go about it.

  Thank you!

  Hello

  Like any data source as an essbase.

  

  You can filter the data by the user, use a NQSESSION. to get the session the correct access.

  

  Kind regards

• Restrict access to the page

  Hello

  Appreciate if some web developers who are more experienced can help a beginner like me:

  I already used the Dreamweaver Server behavior to restrict access to a page... for example, localhost/xxx/xxx.php

  However, when I have a link that has a php echo as localhost/xxx/xxx.php?id= <? PHP echo $row_rsListing ["ListingID'];? ">" > < button type = "button" class = "btn, btn - sm btn - default" style = "background-color: #add8e6" > change list < / button > < / has > and I click on the link and it goes to a URL that says localhost/xxx/xxx.php?id=1, I can then go to the URL line and changed manually to localhost/xxx/xxx.php?id=5 which is under a different user and page restrict access doesn't stop me access to this page.

  What should I do to prevent this?

  Thanks in advance.

  Peter

  The best advice you can get as a beginner is to stop using Dreamweaver server behaviors. They have been deprecated by Adobe many years ago and have been removed from Dreamweaver, because PHP code they use is not reliable. All the database-driven server behaviors rely on what is called the original MySQL extension in PHP, which has been removed from PHP 7. Even if your site currently still support the original MySQL extension, you will be forced to redo all your code when it is upgraded to PHP 7.

  Adobe has not created versions updates to server behaviors. You must either learn how to manually code PHP yourself (not particularly difficult) or buy third-party extensions created by DMXZone or WebAssist.

• Restrict access to the PROD, but not DR.

  I use version 11.2.0.3.0 Production. I have questions.

  1 Prod DB is frequently asked by developers and QA guy with intensive queries of resources resulting in production down? So we intend to restrict access to these users of prod and don't give access to functional users. And for the developer/qa guys, give them access to Dr. (stand-by). So, how do I restrict user to prod but not the doctor (copy of Prod), how can this be achieved? Or any other way to do this?

  2. our production DBAs, complain that they are facing a problem (mighyt be performance related) because of sessions connected for long hours with the inactive state of developer/qa people. But my understanding was, he simply eats low memory (much lower), but will not set any CPU load, so need advice of experts, how session idle could cause problem?

  Use of theSERVER_HOST environment variable.

  See SYS_CONTEXT in the doc of the SQL language.

  http://docs.Oracle.com/CD/E11882_01/server.112/e26088/functions184.htm

  The host name of the computer on which the instance is running.

  SELECT SYS_CONTEXT (' USERENV', 'SERVER_HOST' ') FROM DUAL;

• How can I give any who access a form via my site, ask them to sign it and have it sent to me, without me having to ask their signature by e-mail?

  As a doctor, I would like that one to be able to access this form and make them sign before they come and see me in my practice. The form is a release of information request form so that I can get their files from another installation, have examined the and saved us twice before meet us for our new first patient visit.

  Ideally, there will be a link on my Web site where they are able to access this form, sign it and then it is sent by email to me, signed. This way I can quickly get the pdf file and fax it to the previous provider and ask for their records.

  Thanks for the help and suggestions.

  Hey rustonasfar,

  You can do the same by creating a widget via a paid account of eSign Adobe.

  To learn more about creating a widget, please visit:

  Document help Cloud | Create Widgets | eSign services

  Hope that helps.

  Kind regards

  Ana Maria

• Access to the secure area does not work with user registration registered user name and password

  I have a problem giving access to users who register for the video service I provide. The form that they fill out includes it a chosen user name and the password, which should give them access to the secure area, but is not currently. I'm puzzled.

  In the CRM, the recording of the customer in question has a user name and current password? and on the "Subscriptions" tab, they are subscribed to the appropriate secure area?

  Your form online, under the 'Edit properties' button, "Safe Zone" is set to the appropriate secure area?

• Restricting access on Unix

  Hello

  I would like to how we restrict access on unix. We can the way we read-only apps schema, have read-only unix users.

  The user must have read-only access and access of reading-writing/ftp only on the $APPL_TOP elsewhere.

  Thank you

  Abhishek

  Hello

  test: x: 507:507: / home/test:/ sbin/nologin

  does not even ftp. Infact the account is not accessible even from root

  The user or the user root itself won't be able to connect to the level of the BONE, but the FTP connections are allowed. Let me illustrate:

  User or root cant login for the respective user to the BONE

  [root@dev oracle] # cat/etc/passwd | grep ftp_user

  FTP_USER:x:501:502: / home/ftp_user: / sbin/nologin

  [root@dev oracle] #.

  [root@dev oracle] # su ftp_user

  This account is currently not available.

  But FTP is possible:

  C:\Users\Asif>FTP 192.168.1.2

  Connected to 192.168.1.2.

  220 (vsFTPd 2.0.5)

  User (192.168.120.129:(none)): ftp_user)

  331 please specify the password.

  Password:

  230 login successful.

  FTP >.

  FTP > bye

  Hope that clarifies.

  Thank you &

  Best regards

• Anyone had problems, in the new BC Beta feature, add a web form to a page as a module?  I am able to access the form as normal, just can't seem to add to a page.

  Anyone had problems, in the new BC Beta feature, add a web form to a page as a module?  I am able to access the form as normal, just can't seem to add to a page.

  Is apparently is a problem of Google Chrome browser.  There is no problem in Firefox.  BC said they are working on a solution.