Restricting access on Unix

Similar Questions

• Restrict access works sometimes

  With DW CS3 on Mac 10.4.11 & PHP 4.4.7 & MySQL 4.1.21 - standard on Apache 1.3.37 on a UNIX server.
  
  I've implemented "Log In User" SB. Works fine.
  I've set up "Restricting access" SB on PHP pages dummy (based on the model, but with little content, no other PHP or SBs on the page) and "restricting access" works very well.
  Then, I put "Restricting access" with pages PHP contain RecordSets and other PHP code (using the standard DW SB). When I try to access the page, it just crashes if I am connected.
  
  An orientation or direction will be GREATLY appreciated!
  
  Thank you
  
  Here is the code for a page that does NOT work:
  
  

  Found the answer to my own question. I changed the line 1 of the 'virtual' to 'require_once' and everything works fine!

• Restricted access has changed

  I'm getting frequent notice about "Changed to restricted access, emergency Service is blocked. I don't know why it is so frequently. It is related to which of the functions? Can someone tell me please how to disable it?

  
  

• How to restrict access to the drive of Wndows xp sp3?

  I have 3 user account on my computer, it is has the administrator rights and the other is a standard user account.

  I want to restrict access to all readers for the standard player.
  I used gpedit.msc to enable the administrative model, but it also limits the account admin and me to access the road
  OS: windows XP SP3
  Please advice
  Hi Utkarsh.Ranjan,
   
  If you want to restrict access to a drive by using the Group Policy Editor, you can not apply for a particular user account. This will change for the user accounts.
   
  You can't restrict access to the complete transmission. However, you can resrtict access to folders and files inside a car to a particular user.
   
  Refer to the section "set, view, change, or remove special permissions for files and folders" in the following article and follow the steps to remove the authorization of the user access to the file/folder.
  How to set, view, change, or remove special permissions for files and folders in Windows XP

• BEFSX41 - Blocked Services in restrict access tab is grayed out

  Blocked Services restrict access tab is grayed out, so I've updated to the current version of the firmware:
  Release date: 14/08/2009
  Current firmware: Version 1.52.16.4
  Product part No.: BEFSX41 v1/v2/v2.1

  Hung services is always grayed out.

  I have tried Linksys chat, but they do not help this serial number is "out of warranty". So I'm looking a way enable the blocked Services feature. .  Does anyone know how to activate it?  Thank you.

  Are you sure that you create an authorization rule and not a deny rule. Hung services are available that allow for rules, i.e. you want to allow internet traffic except some blocked services. A deny rule will block all internet. In the demo UI I choose blocked services if I select "allow".

• Restricting access to Internet WRT160N problem

  I use router WRT160n.

  I used the access restriction to restrict internet access for 12-05:30 every day.

  during 12-05:30 every day, when I use my laptop to access the internet by wifi, the site is blocked, and internet access is limited. This works correctly.

  However, when I connect the lan from my laptop to the router and try to access the internet, I can browse the site normally. I can browse google, yahoo and all Web sites. in this case, the access restriction cannot funciton properly.

  My question is:

  Why restricting access can work when I use the lan cable to connect to the router?

  How do I fix this so that the router can block all access to the internet, even when I use the lan cable to connect to the router?

  Thanks for your help!

  If you are using an ethernet cable, your computer uses a different MAC address and a different IP address on your local network. Basically, for the router, it looks like a completely different computer. You need to add the IP address or a MAC address restriction policy.

• my wireless connection says "restricted access" no network connection. I used the same key code to get my other computer online

  my wireless connection says "restricted access" no network connection, I used the same key code to get my other computer I can have up to 5 computers online at the same time online.

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello

  This means that the computer cannot connect to the router.

  Try this process.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  Make sure that if there is Wireless Utility a utility vendor is not running with the native Windows wireless utility.

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Stack TCP/IP work should look like.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.

  The physical address is MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.

  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

  ---------------------------------------------------

  Above everything is OK, you must be able to connect to the router.  A window that says connected does not mean that you are really connected. Connection to the router means that you can enter the IP of the router base in an address bar in one go, being able to connect and configure the router menus see. If it is not connected in the log to router from any computer that can connect to the router wirelessly with a wire, disable wireless security, (make sure that the wireless SSID broadcast) is on and try to connect with no. wireless security.

  --------------------------------------------------

  I really checked and configured every thing and it doesn't work.

  Software firewall application that is not configured to allow local traffic (between the computer and the router is also a possible problem.
  some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Restrict access to the administration to WLC5500

  Hi all
  We have configured all our devices in WLC5500 with a service port interface, which helps us to management and monitoring. Given that in our situation, the management interface is accessible from enterprise networks, this means that desktop clients have the ability to achieve the WLC logon screens.

  Is the only way to restrict access to ports to place an on the management interface access ports, or am I missing a GUI/SSH secret command / button that will allow me to disable or limit the management of devices through the management interface?

  In which case I'll have to use an ACL on the WLC management interface, are there any known issues with denying them access to the ports http, https, telnet, ssh and LWAPs trying to connect?

  Thank you
  Leon

  You have hit it on the nose.  You must have an ACL that blocks the terminals "non-admin" to http/https/telnet/ssh/snmp on the device.  as long as you have the permit ip any at the end of the ACL, you should have no problems, or explicitly allow udp 5246/5247

• How to restrict access to users?

  Original title: ask the community

  Hello

  Operating system is Windows 7 Pro 64 bit.

  Scenario:

  Drive C is about 200 GB

  D drive is 500 GB.

  Want to keep the drive clutter free C, so I created folders for music, videos, etc. on my drive D. I downloads I need to restrict access to all users except those with administrator privileges. How can I do this?

  Vijay.

  I'm sorry that I didn't have this update. At the end of the day, it is quite simple.

  Right-click on the folder, go to "share with"select"Nobody" selected "change sharing permissions."

  Adds the user in the drop-down list just to be sure.

  Tried to access the folder since the account other users & got an access denied message. If I clicked on continue after he asked my administrator/user password. It was good enough for me.

  Vijay.

• Restrict access VPN client on IOS 12.4

  I'm trying to restrict access to the client VPN ports for the specific customer VPN leading to a router in 1841 running IOS 12.4 (9).

  With versions of IOS of pre-12, 4 that this could be done by using the ACL on the outside, but with version 12.4, it seems that VPN connections are allowed even without a declaration of "permitted" in the external ACL (similar to "sysopt connection permit-ipsec" on the PIX).

  Is it possible to limit the VPN traffic on the external interface of the client?

  See you soon,.

  Christoph.

  Hello

  The feature you're looking for is called:

  Access check crypto on plaintext packets

  Check it out in the Configuration Guide for Cisco IOS, version 12.4 security

  In sort, set the encryption to your ACL post, go into your crypto-map and apply it with:

  set ip access-group {access-list-number | access-list-name} {in | out}

• IPSEC RA - activate crossed but restrict access to the web

  ASA5520 8.2 (5) 30

  Greetings,

  I have an IPSEC RA strategy that has implemented to tunnel all traffic (no split tunnel) by the ASA (which ends on the external interface).  I need to be able to allow VPN users to access a web page (crossed) thesesame on the external interface.

  ++++++++++++++++++++++++++++++

  Here are the current settings:

  Group Policy Admins L internal

  attributes of Group Policy L_Admins

  value of server WINS 172.16.0.33 172.16.0.9

  value of 172.16.0.33 DNS server 172.16.0.9

  VPN-idle-timeout 60

  VPN-session-timeout 480

  VPN-value filter-admin-l

  IP 172.30.4.0 allow Access-list l-admin-test-filter extended 255.255.255.252 host 172.16.0.33

  IP 172.30.4.0 allow Access-list l-admin-test-filter extended 255.255.255.252 host 172.16.0.9

  IP 172.30.4.0 allow Access-list l-admin-test-filter extended 255.255.252.252 172.16.1.4 host

  IP 172.30.4.0 allow Access-list l-admin-test-filter extended 255.255.252.252 welcome 172.16.1.2

  access-list extended l-admin-test-filter permit ip 172.30.4.0 255.255.252.252 10.24.0.0 255.252.0.0

  IP 172.30.4.0 allow Access-list l-admin-test-filter extended 255.255.252.252 the host 172.16.0.233

  Protocol-tunnel-VPN IPSec

  Split-tunnel-policy tunnelall

  value by default-field IHI.local

  type tunnel-group L_Admins remote access

  attributes global-tunnel-group L_Admins

  address ili_global pool

  PhoneFactor authentication-server-group

  Group Policy - by default-L_Admins

  IPSec-attributes tunnel-group L_Admins

  pre-shared-key *.

  ++++++++++++++++++++++

  Crossed is not currently enabled, so I guess I have to add:

  permit same-security-traffic inter-interface

  and (I guess)

  mask IP local pool l_admins 172.30.4.1 - 172.30.4.2 255.255.255.252

  Global (outside) 1 interface * PAT IP

  NAT (outside) 1 mask 172.30.4.1 - 172.30.4.2 255.255.255.252

  But from there I don't know how to restrict access to a single external IP on the web on port 80.

  Hello

  Enter the correct command to permit traffic and the same interface of leave is

  permit same-security-traffic intra-interface

  The command you posted allow traffic between 2 different interfaces that have the same value of 'security level'

  permit same-security-traffic inter-interface

  What about PAT Dynamics for Internet traffic

  If you have already

  Global 1 interface (outside)

  Then you will need the command "nat" for the VPN pool

  NAT (outside) 1 172.30.4.0 255.255.255.252

  In what concerns the control of Internet traffic, should not be able to simply add this destination IP address to the VPN filter ACL you have ever used? I mean the ACL named "l-admin-test-filter".

  For example

  L-admin-test-filter access list note allow the external server connection

  access-list l-admin-filter-test permit tcp 172.30.4.0 255.255.255.252 host eq 80

  access-list l-admin-filter-test permit tcp 172.30.4.0 255.255.255.252 host eq 443

  access-list l-admin-filter-test permit tcp 172.30.4.0 255.255.255.252 host eq 8080

  -Jouni

• Using filters Essbase to restrict access to OBIEE dashboards for multiple users

  Hello

  You can use Essbase filters to restrict access to the data in OBIEE dashboards so that users with no access to specific members are not able to see all data for multiple users.

  Any suggestions on how to go about it.

  Thank you!

  Hello

  Like any data source as an essbase.

  

  You can filter the data by the user, use a NQSESSION. to get the session the correct access.

  

  Kind regards

• is it possible to restrict access to a particular application for the particular user?

  is it possible to restrict access to a particular application for the particular user

  for example, if an application will not be editable for user mode

  or it will be only editable for a user

  We gave access as a developer of a workspace to a single user

  but we don't want him to change a single application.

  Oracle Application Express 5.0

  Your terminology is mixed - looks like you're talking about limiting applications, a developer can edit in the application builder in a workspace.

  No, you can't.

• How to restrict access to certain pages of a user group

  I want to restrict access to certain pages in my application to a set of users only. How can I achieve this.

  use the authorization scheme for permission to the users group"

  See also follows her

  Schema authorization using the APEX authentication scheme

  security - authorization roles and user in Oracle Apex? -Stack overflow

  How to create the schema for permission for the users group.

  Leave.

• How to restrict access to the service web application deployed on weblogic for user group only

  I built the web service application in jdevelopler 11.1.1.7. Their security policy applied in the web service of the default Oracle policy which is (policy: Wssp1.2 - 2007-Https-UsernameToken - Plain.xml)

  Now all want to access the web service application must provide the name of user and password in the header section of the SOAP request to meet the requirement of the policy.

  the following steps I'm trying to restrict access to the application of web service with a specific group of users among users of weblogic:

  Connect to the weblogic administration console

  Create user or group of users

  Click on the links of deployments

  Select your web service

  Click the Security tab

  Click the sub-tab political

  Choose your authorization provider in the menu drop-down (looks like by default)

  Choose Add Conditions-> Group-> Type in the name of the Group

  Finishing

  But access is always available for all weblogic users (IE users not in the group specified in the above security configuration). How can I restrict access to only authorized group? Any thing lacking in my approach?

  There is nothing wrong with the steps mentioned in the question. In addition, you must do the following

  At the time of the application deployment with regard to the security part, there is a list in the title of the question (which security template you want to use with this application?)

  You must select (Advanced: use a custom template that you have configured on the page of configuration of the Kingdom) a configuration mentioned in the question will be work