Restrict the user behavior does not

I have a folder with several subfolders inside admin. Access to the administration area requires a user name and password stored in the Access database. Login on the min page works very well; However, when I add a behavior to restrict access to an inside page in the admin section, it does not seem to work, I can type the URL of the page and still get the information without restriction. Am I doing this wrong?

Thank you.

"Make sure you use restrict based on: username, password and access level when you use the ' restrict access to the behavior of the page" you may need to make another column in your db to store the name of the access level (set in the "restrict access to the behavior of the page'") you name anything make sure you just you misspell not them identical (to define and db). Also change your login user behavior to get the value of the appropriate column, you can create as many levels as you need. Admin, Director, employee, asked some.

Tags: Dreamweaver

Similar Questions

The user profile does not

Windows vista user account does not

· Restore point:

Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

Try a restore of the system once, to choose a Restore Point prior to your problem...

Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

If the above does not work:

http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

Difficulty of a corrupted user profile

After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

http://support.Microsoft.com/kb/947242

A temporary profile is loaded after you connect to a Windows Vista-based system

See you soon.

Mick Murphy - Microsoft partner

How to restrict the user to enter not same value in a table
Greetings!

I m asking a second time the upfront because I did not answer preivously, so please don't mind if it's a double.

It was: I have created a table, as shown in the example.

I want to validate the user name that you see in my example to restrict the user to enter the same value in the user name field before submitting page.

for example when the user enters data as u see test in user name in the first row, when it goes to the second row and type same username as test "message will appear or restrict the user who has already typed or in use"...

http://Apex.Oracle.com/pls/Apex/f?p=45296:1:22797340776918:

It's all done on typing submit prior to registration.

Please drivers
Hello

I m asking a second time the upfront because I did not answer preivously, so please don't mind if it's a double.

It was: I have created a table, as shown in the example.

I want to validate the user name that you see in my example to restrict the user to enter the same value in the user name field before submitting page.

for example when the user enters data as u see test in user name in the first row, when it goes to the second row and type same username as test "message will appear or restrict the user who has already typed or in use"...

http://Apex.Oracle.com/pls/Apex/f?p=45296:1:22797340776918:

It's all done on typing submit prior to registration. >

Stick the code below into the Page header > Javascript > run when loading the Page field.
```
$('[input[name="f03"]').blur(function(){
  if ($('input[name="f03"][id!="'+$(this).attr('id')+'"]').val() == $(this).val()) {
     alert('Duplicate Entry.');
     var x = $(this).attr('id');
     setTimeout("(function(p){$('#'+p).focus();})('"+x+"')",100);
  }
})
```
Note:
a.F03 is the 'name' of your column of username in the form of tables.
b. This only valid values. If your tabular presentation has multiple pages then all of the rows are not currently displayed will be ignored.

See you soon,.

Ping the computer of the user but does not '\\user\d$ '.

Hello friends,

I have a problem according to the files and folders in my network.

A Client PC using windows xp. Ping PC correctly but the '\\user-PC\c$' does not. Also not connect to vnc viewer.

Hi David,

Thanks for posting your query in Microsoft Community.

From your problem description, I understand that you have problems to access the XP client computer.

The question you have posted is related to networking, it would be better suited to the TechNet community.

Please visit the link below to find a community that will provide the support you want.

http://social.technet.Microsoft.com/forums/en/category/windowsxpitpro

I hope this helps. If the problem persists or all linked windows queries or issues related to the Windows operating system, please get back to us. We are here to help you.

The user profile does not load

I received the message, the service user profile Service does not logon, user profile cannot be loaded. How can I fix?

I received the message, the service user profile Service does not logon, user profile cannot be loaded. How can I fix?

You have another admin account, you can connect?
If so, please do it and then run the Microsoft Support tutorial below.

If you don't have another admin account, go into safe mode.
Here's how to get safe mode:
Shut down your computer > turn it back on and immediately and repeatedly tab key F8 until you see a black and white screen. The top/down arrow and select Safe Mode with network.

In the window to logon safemode, you see another admin next to your account? If you do, that one is the built-in Administrator account. By default, there is no password. Opening of session and run the tutorial from Microsoft Support below.

Tutorial from Microsoft support :
There are several methods, go through one by one.
Method 3 has a "fix it for me" application
http://support.Microsoft.com/kb/947215

For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

The user profile does not load at startup - vista help

When I turn on my computer and choose me as the user (which is the only user he is listed on the computer), I get an error messgae saying: unable to load the user profile...

How can I fix it?

Thanks much for the ideas! really enjoyed

Restore point:

Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

Try a restore of the system once, to choose a Restore Point prior to your problem...

Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

If the above does not work:

http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

Difficulty of a corrupted user profile

After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

See you soon.

Mick Murphy - Microsoft partner

The user profile does not load correctly

Running Vista Ultimate. I have 2 user accounts, the two administrators. If a user remains logged on for any period of time (more than 10 minutes), disconnects, and then another user logs on, they will get the dreaded "your user account is not load correctly."

A reboot always restores the afflicted user account. Web an extensive search doesn't have all the solutions near mine.

Examined the msgs of following error in the application event log: 1511 1515 WARNING WARNING 1502 1508 error. This just started recently.

Appreciate your help.

Have installed kaspersky AV and media center tv pack units.

Hello

You can try to fix it with Safe Mode - repeatedly press F8 as you bootup.

Some programs such as the updated Google (if you've added the Google toolbar, Chrome or the z
Google Earth) has been known to cause this problem.

How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

How to fix error "your user profile was not loaded correctly! You have been logged on with
a temporary profile. "in Vista
http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

BE VERY CAREFUL IF YOU USE THIS ONE:

DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrrups you are TOAST.

How to enable or disable the real built-in Administrator account in Vista
http://www.Vistax64.com/tutorials/67567-administrator-account.html

Use the Admin account hidden to lower your user account APPLY / OK then wear again to
ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
above message.

You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
password (or two with the same password) use a test or difficulty to another.

You can run the command Admin account hidden from the prompt here if
necessary.

This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

If you can't access your old account you can still use an Admin to migrate to a new
(remember to always leave an Admin who is not used except for testing and difficulty account).

Difficulty of a corrupted user profile
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

I hope this helps.
Rob - bicycle - Mark Twain said it is good.

The user profile does not properly

Turning on my computer these days, I get a message that says:

Your user profile was not loaded correctly: you have been logged on with a temporary profile, the changes you make to this profile will be lost when disconnected. Please see the the event log for more information or contact your administrator.

I have Windows vista, SP2 on my toshiba computer

I'm not the most computer intelligent person, but in this case everything that has been saved on my computer such as photos, music, etc. is not on the computer. Anyone have suggestions on what to do or try on this message.

Thank you

Toshibasheila

Hello

You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
Mode has no default password (unless someone has changed the password so it should be available).

These problems and similar bugs can help:

A temporary profile is loaded after you connect to a Windows Vista-based system
http://support.Microsoft.com/kb/947242

How to fix error "your user profile was not loaded correctly! You have been connected with a
temporary profile. "in Vista
http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
has been known to cause this problem.

How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

-----------------------------------------------

Try these to erase corruption in the case where it plays a role.

1. run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

2. start - type in the search - box COMMAND find top - RIGHT CLICK – RUN AS ADMIN

sfc/scannow

How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228

3. then run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

-----------------------------------------------

Other methods:

Use the hidden administrator account to lower your user account (to the lowest level) APPLY/OK then go back
and reset it to the Admin APPLY/OK - this clearly allows corruption. Do this several times. Do the same for others
accounts that may be difficult. If necessary you can also reset your password in the accounts.
Do not forget to leave your Admin account and the other to the desired level.

Make another Admin account with your password and use it to fix the others if necessary. (just for
repair, don't use regular account, not a safety valve) always keep a spare ADMIN account.

DO NOT LEAVE THE ENABLED LSA OR USE DAILY. If it corrupts you are toast!

How to enable or disable the real built-in Administrator account in Vista
http://www.Vistax64.com/tutorials/67567-administrator-account.html

You can run the Admin account hidden from the prompt by if necessary.

This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

If you cannot access your old account, you can still use an Admin to migrate to another (do not forget to always
not that an Admin account that is not used except for testing and difficulty).

Difficulty of a corrupted user profile
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

I hope this helps.

Rob Brown - Microsoft MVP - Windows Expert - consumer: bike - Mark Twain said it right.

running, but won't let me log on... said something like service of the user program does not log on and wont let me here at my stuff! Help, please

When I log in as my son and go to other accounts he then askin 4 staff or password and I don't know it

Hello

You can try to fix it with Safe Mode - repeatedly press F8 as you bootup.

Some programs such as the Google Updater (if you added the toolbar Google, Chrome or Google Earth) has been
known to cause this problem.

How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

How to fix error "your user profile was not loaded correctly! You have been logged on with a temporary
Profile. "in Vista
http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

BE VERY CAREFUL IF YOU USE THIS ONE:

DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrrups you are TOAST.

How to enable or disable the real built-in Administrator account in Vista
http://www.Vistax64.com/tutorials/67567-administrator-account.html

Use the hidden administrator account to lower your user account APPLY / OK and then lift it to ADMIN.
This allows clear of corruption. Do the same for other accounts if necessary after following the above message.

You can use the hidden - administrator account to make another account as an ADMINISTRATOR with the same password (or
two with the same password) use to test or difficulty of the other.

You can run the Admin account hidden from the prompt by if necessary.

This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

If you cannot access your old account, you can still use an Admin to migrate to another (do not forget to always
not that an Admin account that is not used except for testing and difficulty).

Difficulty of a corrupted user profile
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

I hope this helps.

Rob - bicycle - Mark Twain said it is good.

Dynamic stamps with the user input does not work in Acrobat DC

After the update to Acrobat DC our dynamic personalized stamps no longer work. Pop ups to enter the data of the user are not more. When you open the PDF stamp if they work, but on the stamping stamp is affixed just without asking for user input via javascript.
Any ideas on how to solve this problem? Is this a bug? Disabled Adobe functionality?
K

You should place as the custom calculation of one of the fields script and modify the code to check the stampName property.

Search for information on dynamic PDF badges. There are many examples and code snippets out there in how to do it properly.

There is even a whole book dedicated to this topic by Thom Parker.

Subject: view_source.editor.path game the user config does not work.

Until recently, I had the object of work, but recently firefox option
apparently changed something for the desired function no longer works.
What should I do to make it work again?
Comments: config I changed view_source.editor.path so that
He has "the user's game" and "string" to/usr/bin/kwrite
who is the editor that I always used to modify the source code
for my websites and then refresh to display the results.

Now, however, you have changed something so that I
Works of Set and specified is no longer. Why? And what I have to do
to get this working again?

Hello, check to see if for some reason any view_source.editor.external is the default false, it must be true to the view_source.editor.path to work.

Thank you

Images of the user interface does not?

I have this problem that just started to happen. I don't have to open my project within a certain time and now all of a sudden every time that I run through flash builder my entire user interface (all images) load with question marks and I get access denied error when you create a folder in a shared directory. I need to desperately remedy as soon as possible because I need to get an update for my application tomorrow. If this can help I worked in flashbuilder on a different project for some time, but I got my cert backup files. Has anyone seen this happen before?

Thanks for the replies. I had all the necessary permits and all files were in place. It turns out that there may have been a corrupted project file. Everything has started a new project and copied on all my code and active, linked up all my library references and voila.

Waterfalls of the user interface does not support win 8

Hello I have a problem, I tried to install my stunts BETA 2 in my computer with Win8 but it's install finishing show me an error message "_ - nterface not support."

Is there any way to solve this problem or I have to redo a downgrade to Win7?

Hello

I use stunts and earn 8 a few months now, no problems.

Bring up a menu contextual (right-click) on the Setup file, select Properties, then the Compatibility tab and set the compatibility for Win 7, it will then install without problem.

I am the administrator on my pc. and my user profile does not load.

recently, when I connect I get a message saying that the user profile does not, or will not, support. How can I fix it? Be admin, I can't make all the changes that my profile does not load. I can connect with my husband and children, as their loading user profiles, but, when I try to make changes and type my password properly, it won't connect so I can't do anything! Help! Thank you!

Yes, you will lose everything when you re-install.

If you are able to logon to an account that can back up personal files as much as you want to keep on an external hard drive, or Flash drives or DVDs.

You will need to re - install all the programs you already have installed.

I work to integrate AD with ADC, but there are a few users that does not appear on the ADC. Someone knows why?

I have an ASA 5515 with module CX and I m trying to configure rules based on users of the AD. I have instaled CDA (context Directory Agent) and is integrated with AD and module CX and ASA and I have also set up rules on the ASA and module CX and works well. The problem I have is with users who does not appear on the ADC. When the user is on CDA is OK. But I should have more less 250 users on CDA and I only 171. I restart PC users doesn´t appear and after reboot, some users appear and others do not. Anyone know why this behavior?

rgoncalves

You can check a few things? Software version CX and your version of the ADC? Also do you have more than one domain controller in your environment? Also what version is DC?

Restrict the user behavior does not

Similar Questions

Maybe you are looking for