restrict the user to commit when scrolling to record

Similar Questions

• I want to restrict the user manual release of the HOLD in the sales order

  Hello

  I want to restrict the user manual release of the HOLD in the sales order

  Hello

  Please use below the installation program

  1. go in responsibility: responsibility of the order management Super user.

  2. go to the Set up > order > holds > define.

  3 ask the wedge which has already been set.

  Assign at least a responsibility to a particular action as shims to apply or release, and then only hold permissions will take into account.

  4. after installation above this shim is not in the LOV when connecting other

  responsibility

  Thank you

• How to restrict the user to enter not same value in a table

  Greetings!
  
  I m asking a second time the upfront because I did not answer preivously, so please don't mind if it's a double.
  
  It was: I have created a table, as shown in the example.
  
  I want to validate the user name that you see in my example to restrict the user to enter the same value in the user name field before submitting page.
  
  for example when the user enters data as u see test in user name in the first row, when it goes to the second row and type same username as test "message will appear or restrict the user who has already typed or in use"...
  
  http://Apex.Oracle.com/pls/Apex/f?p=45296:1:22797340776918:
  
  It's all done on typing submit prior to registration.
  
  Please drivers

  Hello

  I m asking a second time the upfront because I did not answer preivously, so please don't mind if it's a double.

  It was: I have created a table, as shown in the example.

  I want to validate the user name that you see in my example to restrict the user to enter the same value in the user name field before submitting page.

  for example when the user enters data as u see test in user name in the first row, when it goes to the second row and type same username as test "message will appear or restrict the user who has already typed or in use"...

  http://Apex.Oracle.com/pls/Apex/f?p=45296:1:22797340776918:

  It's all done on typing submit prior to registration. >

  Stick the code below into the Page header > Javascript > run when loading the Page field.

  $('[input[name="f03"]').blur(function(){
    if ($('input[name="f03"][id!="'+$(this).attr('id')+'"]').val() == $(this).val()) {
       alert('Duplicate Entry.');
       var x = $(this).attr('id');
       setTimeout("(function(p){$('#'+p).focus();})('"+x+"')",100);
    }
  })
  

  Note:
  a.F03 is the 'name' of your column of username in the form of tables.
  b. This only valid values. If your tabular presentation has multiple pages then all of the rows are not currently displayed will be ignored.

  See you soon,.

• How to restrict the user to enter data into the PLUGS DO

  Hello
  
  I textinput in my page, I have to restrict the user to enter the data covers only.
  
  can someone help me on this.
  
  Knockaert

  Please go through this site.

  http://oracleanil.blogspot.com/2010/10/restrict-user-to-enter-data-in-caps.html

  Concerning
  Meher Irk

• Vault to Oracle set up rules to restrict the user and the type of application that can connect

  Oracle 11 g 2 (11.2.0.4.3)

  RHEL 6

  Hi all

  We are experiencing a few problems to configure the following condition:

  Users A, B, and C will not be able to connect via SQLPLUS.

  So I took note of the political examples on how to Set Up database Vault (Doc ID 972477.1() -section restrict access to the database (sqlplus) unwanted tools:

  However, it doesn't evaluate the rule in the rule set correctly. The rule set is as follows:

  DVF. F$ MODULE! = ' SQL * MORE AND DVF. F$ SESSION_USER NOT IN ("USERA", "USERB", "USERC")

  This rule allows all users to connect except those defined in the rule. And it applies also to the developer SQL (and all other connections). If I change to be 'IN' he also allows users in the list, but no one else. In addition, somewhere I think it evaluates it as "OR" rather than "AND". What I want to do is:

  IF user IN ("USERA", "USERB", "USERC") AND SYS_CONTEXT ('USERENV', 'MODULE') = ' SQL * MORE

  SO, do not allow the user to connect.

  Note: The factor (MODULE) has been created by me and her expression is SYS_CONTEXT('USERENV','MODULE')

  Any help on this would be greatly appreciated.

  I tested these rules and they work:

  (1) ((upper (sys_context ('userenv', 'module')) like '%%') and (not in sys_context ('userenv', 'session_user') ('A', 'B'))) or ((upper (sys_context ('userenv', 'module')) like ' % %') and DEVELOPER (not in sys_context ('userenv', 'session_user') ('A', 'B'))))

  (2) ((upper (sys_context ('userenv', 'module')) not like ' %PLUS%')) or ((upper (sys_context ('userenv', 'module')) not like ' % DEVELOPER %'))))))

  I'm blocking users A and B to connect from SQL * more and SQL Developer

  -set the rule defined for all THE TRUE evaluation

• Restrict the user to select a fixed number of values only to the SelectManyShuttle component

  Hello

  I'm working on JDeveloper 11.1.1.7.

  My requirement is to allow the user to select a fixed number of values using the SelectManyShuttle component only.

  Suppose if I have 10 available values in the left part of the element of the shuttle, I should allow the user to shuttle only three values on the right.

  In the image below, I already have 3 employees. Now the user should not be able to select employees more.

  < af:selectManyShuttle label = "Label 1" id = 'sms1.

  value = "#{pageFlowScope.shuttleBean.selectedEmpNames} '"

  leadingHeader = "all employees".

  trailingHeader = "selected employees.

  simple = "true" >

  < f: selectItems value = "#{pageFlowScope.shuttleBean.allEmpNames} '"

  ID = "si1" / >

  < / af:selectManyShuttle >

  

  Can you please share your ideas to achieve this?

  Respect,

  Vinod

  There are different strategies how to implement this. The easiest will be to check the size of the selected list when the user cklicks the button finished. If the number is larger that the size limit display you an error message.

  Another way would be to use a valueChangeListener and the listener, check the size of the new value and add the tonthe size from the size of the already selected list. Then display an error message.

  Timo

• How do you know that a spesific procedure or function has been run by the user who and when?

  
  Hi all

  Suppose I have a procedure or a function whose name is MY_PROC. Is it possible to learn that the user who has been running this procedure and when?

  Thank you

  Hi NightWing,

  You need VERIFICATION for operations.

  11.2 docs: AUDIT

  For example:

  SQL> show parameter audit_trail;
  NAME                                 TYPE        VALUE
  ------------------------------------ ----------- ------------------------------
  audit_trail                          string      DB
  SQL>
  
  SQL> conn iarsov/iarsov
  Connected.
  SQL> create or replace function test_audit
    2  return date
    3  is
    4  begin
    5  return sysdate;
    6  end;
    7  /
  
  Function created.
  
  SQL> conn system
  Enter password:
  Connected.
  
  SQL> audit execute on iarsov.test_audit by access;
  Audit succeeded.
  
  SQL> select os_username,username,obj_name,owner from dba_audit_trail where obj_name = 'TEST_AUDIT';
  no rows selected
  
  SQL> conn iarsov/iarsov
  Connected.
  
  --call the function and trigger audit operation
  SQL> select test_audit from dual;
  TEST_AUDI
  ---------
  04-AUG-14
  
  SQL> conn system
  Enter password:
  Connected.
  
  SQL> select os_username,username,obj_name,owner,timestamp from dba_audit_trail where obj_name = 'TEST_AUDIT';
  
  OS_USERNAME          USERNAME                       OBJ_NAME             OWNER                TIMESTAMP
  -------------------- ------------------------------ -------------------- -------------------- ---------
  oracle               IARSOV                         TEST_AUDIT           IARSOV               04-AUG-14
  

  Kind regards

  Ivica

• Possible way is to restrict the user to the planning an application

  Hello Experts,

  I have a requirement as I want to restrict bit user related to the demand for labour in the planning depends on business unit and product.

  that is... The test user could not access of the user to the company as an employee depends on some operational units and related products. So is it possible to do outside the [Chronicle] manual process.

  Thanks in advance...

  Are you just wanting to restrict access to specific members to enter data to or it also includes being able to 'see' only the data based on some examples.  For example, in the type of financing plan, I have write access to the Dept 123 for all accounts of actual Net profit, I want they have read access to this Department?  In this case, I would make sure that specific effective accounts, that I make sure that the user/group has only read access.

  Thank you

  Mark

• Restrict the user to repeat a course after 24 hours

  Once the user does not have a class, then I would block during 24 hours, and after that this user restrictions can re-attempt of course failed. As I understand it, that is, there should be a user variable that would communicate with the LMS and tool Publisher SCORM. This variable must control the State of restriction. By any chance someone can give an overview of the generic user variable required. Or I'm all ears if there are other ways easy to address this scenario. Currently we use so that internal editor SCORM LMS, but the variable required should be generic in nature, right?

  You have to watch the LMS, I don't see an easy way to do it within Captivate at all. Perhaps with JS, but not sure

• Restrict the user admin reserveing VM the processor and memory on VM

  
  Hi team,

  Need your help. We have the cluster on which vm admin a permisstion to create the virtual machine. We limit so that they cannot create CPU & memory, booking on VMs.We have permisstion created at the level of the cluster. Please advice

  See the Documentation for virtual vSphere on Computer Configuration here: Library of vSphere 5.5 - Virtual Machine Configuration

  According to the document, the name of privilege 'virtual machine. Configuration.Change resources' allows you to change the configuration of a set of nodes of virtual machine resources in a given resource pool.

  You can edit or create a new role that disable this privilege.

  Clone the existing role assigned to the administrator of the virtual machine, and then change the cloned role.

  On the privilege, go to the virtual machine > Configuration > uncheck the resource of change

  

  Go to host & clusters, change the role of admin of vm of existing role to the new (cloned role) who does not have access to the resources for change.

  Now the vm admin not able to set up reserves, limit or actions on both the CPU and memory - but the user should always be able to change the number of vCPU or the size of the memory.

  

• Unity 4.0.3 sr 1-users get error when trying to record greetings by phone

  Hello

  the components are:

  Unity 4.0.3 sr1

  CCM 4.0.2.sr2

  If connection of users to http://server/web/aa - and try to record a new greeting by phone - the GET the following error:

  Reading and recording of phone:

  Unknown problems are Preventng the call.

  It is no problem to record a greeting with the pc, I can also initialize record greetings in web/South Africa for the user - it works too. so only if the user tries to record greetings by phone get this error.

  in settings - the right user ID and the ip address of the unit is entered.

  I have luckily able to find something which helped me to solve this problem.

  You have any ideas?

  Best regards

  Markus

  Hi Markus -.

  Check out this post - other people have problems with SP2 and Media Master - http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40%5E1%40%40.1dd68f83/6#selected_message

  One more thing - 4.0 release notes (4) HOV - http://www.cisco.com/en/US/customer/products/sw/voicesw/ps2237/prod_release_note09186a008022dffa.html#wp1097906

  ViewMail customer requires 4.0 (4) to fix the errors of trap when the clients are running WinXP SP2.

  Ginger

• Difficulties in the identification of duplicates when inserting new records

  I am inserting new contacts through Web Services... Use: Fname Lname, as WorkPhone, HomePhone, ExternalId and IntegrationId.
  
  Everything looks ok... contact is created.
  
  The problem is that if I submit the same soap, the same rendering message again (with a different rowid is created). And once again... a 3rd.one.
  I checked the documentation for the main user definitions, and I think I properly but OD does not identify the double insert.
  
  Pls. no clue on how to fix this?
  TXS.
  Antonio

  Hello Antonio,.

  There is no check duplicate for either through the UI or through WS Contact records. CRM On Demand imposes no constraints of uniqueness on any of the fields individually or in combination, you indicated in your message. There are constraints of oneness through import (for online help):

  Contact
       
  * Surname, name, work phone # and Email

  OR
  * External ID (created by another software system)

  OR
  * Online ID (Oracle CRM On demand ID)

  NOTE: Oracle CRM On Demand does not check for duplicate records when the contacts are created through the user interface.

  Thank you
  Sean

• Not be able to restrict the user Bind DN using OUD11g Proxy

  Hello

  We have large topology of x 6 ODSEE and plan to put restrictions IP/UserBindDN using Proxy OUD11g.

  Add an IP address to "Authorized" list criteria of the OUD to the Proxy network-group via the DOHAD configuration page allows access to dorsal directories that intellectual property only while denying the rest of the IPs, no problem here.

  But when adding a user Bind DN to allowed list link "DN" on the same page of configuration of Proxy OUD11g, adding user Bind DN operation fails since the same IP in the "authorized" Client as giving following error.

  # ldapsearch h < HOME > Pei < PROXY PORT > b < BASE DN > d < USER "DN" > w < USER PW > uid = < USER2 > cn

  ldap_simple_bind: unknown error

  ldap_simple_bind: more info: Worker Thread 77 has encountered an exception uncaught during the processing of operation BindOperation (connID = 91, opID = 0, Protocol = "LDAP 3, dn = < USER DN >, authType = Simple"): NullPointerException)

  Also, I tried removing the IP address from the list of "Authorized" to allow access to all IP addresses, but I get the same error above.

  Is there anything else to configure user Bind DN OUD11g Proxy?

  Thanks in advance,

  -Bora

  Hi Bora,

  workaround should work if you remove your backup network group allowed-auth-method criteria. Note that there is no security risk as this group of network does not allow access to any workflow.

  HTH,

  Flo.

• Restrict the user behavior does not

  I have a folder with several subfolders inside admin. Access to the administration area requires a user name and password stored in the Access database. Login on the min page works very well; However, when I add a behavior to restrict access to an inside page in the admin section, it does not seem to work, I can type the URL of the page and still get the information without restriction. Am I doing this wrong?
  
  Thank you.

  "Make sure you use restrict based on: username, password and access level when you use the ' restrict access to the behavior of the page" you may need to make another column in your db to store the name of the access level (set in the "restrict access to the behavior of the page'") you name anything make sure you just you misspell not them identical (to define and db). Also change your login user behavior to get the value of the appropriate column, you can create as many levels as you need. Admin, Director, employee, asked some.

• Laptop was only gave me my uncle. How do I change to say my name on the user login screen, when I start the computer instead of 'Bob '.

  So I just got this laptop from my uncle, and his name is Bob.  When I turn on the computer and need to type in a password to sign in to get to my desk, he says "Bob."  How do I change to say my name... and when I do this it will automatically change my main folder with all my downloads and documents for say my name or if he insists Bob?

  I have not thinl there is no procedure for this, the only solution I know is to create a new account with your desired name, copy all the files and the settings for the new user account if you want, and then delete the original account when you are sure that you don't need more.
   
  Use the procedure on the article if you want to copy files and settings for the new user account.
  Difficulty of a corrupted user profile
  http://Windows.Microsoft.com/is-is/Windows-Vista/fix-a-corrupted-user-profile