Restrict the user to connect to essbase

Similar Questions

• Vault to Oracle set up rules to restrict the user and the type of application that can connect

  Oracle 11 g 2 (11.2.0.4.3)

  RHEL 6

  Hi all

  We are experiencing a few problems to configure the following condition:

  Users A, B, and C will not be able to connect via SQLPLUS.

  So I took note of the political examples on how to Set Up database Vault (Doc ID 972477.1() -section restrict access to the database (sqlplus) unwanted tools:

  However, it doesn't evaluate the rule in the rule set correctly. The rule set is as follows:

  DVF. F$ MODULE! = ' SQL * MORE AND DVF. F$ SESSION_USER NOT IN ("USERA", "USERB", "USERC")

  This rule allows all users to connect except those defined in the rule. And it applies also to the developer SQL (and all other connections). If I change to be 'IN' he also allows users in the list, but no one else. In addition, somewhere I think it evaluates it as "OR" rather than "AND". What I want to do is:

  IF user IN ("USERA", "USERB", "USERC") AND SYS_CONTEXT ('USERENV', 'MODULE') = ' SQL * MORE

  SO, do not allow the user to connect.

  Note: The factor (MODULE) has been created by me and her expression is SYS_CONTEXT('USERENV','MODULE')

  Any help on this would be greatly appreciated.

  I tested these rules and they work:

  (1) ((upper (sys_context ('userenv', 'module')) like '%%') and (not in sys_context ('userenv', 'session_user') ('A', 'B'))) or ((upper (sys_context ('userenv', 'module')) like ' % %') and DEVELOPER (not in sys_context ('userenv', 'session_user') ('A', 'B'))))

  (2) ((upper (sys_context ('userenv', 'module')) not like ' %PLUS%')) or ((upper (sys_context ('userenv', 'module')) not like ' % DEVELOPER %'))))))

  I'm blocking users A and B to connect from SQL * more and SQL Developer

  -set the rule defined for all THE TRUE evaluation

• I want to restrict the user manual release of the HOLD in the sales order

  Hello

  I want to restrict the user manual release of the HOLD in the sales order

  Hello

  Please use below the installation program

  1. go in responsibility: responsibility of the order management Super user.

  2. go to the Set up > order > holds > define.

  3 ask the wedge which has already been set.

  Assign at least a responsibility to a particular action as shims to apply or release, and then only hold permissions will take into account.

  4. after installation above this shim is not in the LOV when connecting other

  responsibility

  Thank you

• Determine if the user is connected to Wifi or not...

  I am trying to create a form that will send me through my application, however, I only want to show if the user is connected to the wifi...

  That's what I have right now.

  This is my XML:

  
  http://www.w3.org/ns/widgets"
  xmlns:rim="http://www.blackberry.com/ns/widgets"
  version="999.999.999">
  Test
  bbthemelab
  bbthemelab
  false
  
  
  
  
  
  

  Thus, applications works slightly. When I load on my playbook, it reads YOU ARE ON WIFI. However, when I press the switch on my wifi, it continues to read YOU ARE ON WIFI. I also tried to close the application and reload, and it will continue reading YOU ARE ON WIFI.

  Any help would be greatly appreciated!

  I should learn to keep trying and try before you go ahead and come here...

  
  
  
  Click here to refresh the page
  

  I got it to work...

• WIN8 cannot select the user when connecting more

  I used to have the option to select the user to connect as but now I have a screen that says:

  Press Ctrl + Alt + Delete or use the Windows Security button to unlock

  When I hit Ctrl + Alt + Delete I get only the most recent user login.  If I hit the left arrow right top left of the image, I must return to the Ctrl + Alt + Delete screen.  There is no way I can see to select another user.

  If the current user remembers actually disconnect from the screen Ctrl + Alt + Delete I am taken to a login with a choice of the users screen.

  This used to work and I don't know if my 5 yo changed something or if a updated Windows did something.  But my wife and son both need to use this notebook so I really need separate accounts.

  I found a few long really complex stuff on the ' net on the definition of the strategy group and fiddle with the registry but I know my 5 yo did nothing like that.

  How do I change back?

  Dennis

  PS what is the "Windows Security button" anyway?

  I realized that I had recently installed Cisco AnyConnect VPN software to connect to the work.  Which of - installed and now life is still happy.  I will contact Cisco.

  Sorry for the short reply above.  Validation has been broken here earlier today and several machines at the same time making a response and a new post, I didn't type a bunch just to get the "Oops, something went wrong" again.

  Dennis

• Agent using which the user will connect to the file server?

  Hello

  We have installed odi stanalone agent on the file server. This autonomous agent using which the user will connect to the file server?

  Thank you

  Kondo.

  The user who started the agent in this server.

  Thank you

  Chantal

• How to hide a menu option unless the user is connected to a specific area of Secure

  Is it possible to hide a menu option and it display only if a user is logged into a secure area?

  I know that I can add pages to secure areas so that no one can navigate to this page unless the information is recorded in the secure area, but I also want to show a menu in the main menu option, if the user is connected to a secure area.

  Perhaps I could address the issue with CSS to hide the menu option and show only if {module_isloggedin} but it would mean that any user who is connected to any secure area would then see this menu option.

  Is it possible to do?

  Hi David,

  The traditional way was to use JS and CSS in combination with the module_subscriptions module which is a bit tricky, more information on the module here:

  {module_subscriptions} | Developers of business catalyst

  However, now with the liquid that is much easier and safer (as is the side Server). Using the same output of module in liquid form in the collection:

  {module_subscriptions} | Developers of business catalyst

• How to get the IP or hostname of the computer that the user is connected to his office with view 4.5

  How to get the IP or hostname of the computer that the user is connected to his office with view 4.5

  Is this even possible and server display does not store this information?

  Best regards, Najtssob

  This information is stored in the registry of the virtual office. For more information, see this page: use the VMware View Client information.

• How to restrict the user to enter not same value in a table

  Greetings!
  
  I m asking a second time the upfront because I did not answer preivously, so please don't mind if it's a double.
  
  It was: I have created a table, as shown in the example.
  
  I want to validate the user name that you see in my example to restrict the user to enter the same value in the user name field before submitting page.
  
  for example when the user enters data as u see test in user name in the first row, when it goes to the second row and type same username as test "message will appear or restrict the user who has already typed or in use"...
  
  http://Apex.Oracle.com/pls/Apex/f?p=45296:1:22797340776918:
  
  It's all done on typing submit prior to registration.
  
  Please drivers

  Hello

  I m asking a second time the upfront because I did not answer preivously, so please don't mind if it's a double.

  It was: I have created a table, as shown in the example.

  I want to validate the user name that you see in my example to restrict the user to enter the same value in the user name field before submitting page.

  for example when the user enters data as u see test in user name in the first row, when it goes to the second row and type same username as test "message will appear or restrict the user who has already typed or in use"...

  http://Apex.Oracle.com/pls/Apex/f?p=45296:1:22797340776918:

  It's all done on typing submit prior to registration. >

  Stick the code below into the Page header > Javascript > run when loading the Page field.

  $('[input[name="f03"]').blur(function(){
    if ($('input[name="f03"][id!="'+$(this).attr('id')+'"]').val() == $(this).val()) {
       alert('Duplicate Entry.');
       var x = $(this).attr('id');
       setTimeout("(function(p){$('#'+p).focus();})('"+x+"')",100);
    }
  })
  

  Note:
  a.F03 is the 'name' of your column of username in the form of tables.
  b. This only valid values. If your tabular presentation has multiple pages then all of the rows are not currently displayed will be ignored.

  See you soon,.

• How to restrict the user to enter data into the PLUGS DO

  Hello
  
  I textinput in my page, I have to restrict the user to enter the data covers only.
  
  can someone help me on this.
  
  Knockaert

  Please go through this site.

  http://oracleanil.blogspot.com/2010/10/restrict-user-to-enter-data-in-caps.html

  Concerning
  Meher Irk

• Draw the users currently connected to the Application

  Hello
  I want to see the list of users currently connected to the Application.
  
  I had put the Option 'Sign-On Audit' profile to the level of "Mule".
  
  Now I am tracking in the database using option "security: users-> monitor ' and yet the below sql query. I get a different output of two channels.
  
  Select distinct fu.user_name User_Name, fr. RESPONSIBILITY_KEY responsibility
  of fnd_user fu, fnd_responsibility en, icx_sessions ic
  where fu.user_id = ic.user_id AND
  Fr.responsibility_id = ic.responsibility_id AND
  IC.disabled_flag =' no AND
  IC.responsibility_id is not null AND
  IC.last_connect such as sysdate;
  
  Please let me know how to check the users currently connected to the application and their connected at the time.
  
  Thanks and greetings
  Amith

  After successfully completing the 'Purge Signon Audit' request I tried to track users, it shows all users connected to the Application today. He does ' t display the users who are currently connected to the application server.

  This is expected behavior since you have "ic.last_connect such as sysdate;" in your query. If you want to check the users that are connect in the latter in the past (15/30 minutes or 1 hour), please refer to:

  Note: How 295206.1 - Total number of users connected to ORACLE Application
  https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=295206.1

• Two of our accounts of Firefox will not allow the user to connect to gmail.

  I just upgraded my desktop computer for Windows 10. We have several user accounts on this computer. We all use Firefox as a browser. When one user other than me opens Firefox in their account, they can go without a problem, but cannot connect to gmail. They receive the following message: "secure connection failed. An error occurred during a connection to accounts.google.com. The peer certificate has an invalid signature. (Error code: sec_error_bad_signature). The page you are trying to view cannot be shown because the authenticity of the received data could not be verified. Contact the Web site owners to inform them of this problem. »

  If they disconnect from their user account on the computer and connect in mine, then start Firefox, they are able to access gmail and have all the features. Any suggestions? Thank you.

  Hi DShef, in case you are an avast user, please try to disable https scanning in avast:

  1. Open the Avast dashboard on an affected system.
  2. Select settings in the left side menu.
  3. Adopt a Protection Active.
  4. Click on customize next to the Web Shield.
  5. Uncheck the option "Enable HTTPS analysis", and then click ok.

  http://www.gHacks.NET/2014/10/31/avasts-HTTPS-scanning-interferes-with-Firefox-and-other-programs/

• The user cannot connect to a Windows 7 PC unless you are an administrator

  I'm deployment Windows 7 SP1 x 64 bit computers throughout my business.  Only, it was brought to my attention that impossible to connect a user trying to connect to a PC that is part of the field unless they are configured as a local administrator on that computer.  When they try to log on, they get the message: "service Servicethe profile of the user didn't login.  Could not load user profile. »

  In each case where it happened, a user tries to connect to a PC for the first time with their powers AD and get the above error.  If I add the user to the Administrators group, they can connect with no problem.  The other answers, I found have dealt with a bad profile, but in this case they user has never been on the PC so there is no profile for this user.

  Does anyone have any suggestions?

  Hello

  Please contact the Microsoft Community.

  I would have you post your query in the TechNet forums because it caters to an audience of it professionals.

  Check out the link-
  http://social.technet.Microsoft.com/forums/en-us/w7itprosecurity/threads

  Back to us for any issues related to Windows in the future. We will be happy to help you.

• Possible way is to restrict the user to the planning an application

  Hello Experts,

  I have a requirement as I want to restrict bit user related to the demand for labour in the planning depends on business unit and product.

  that is... The test user could not access of the user to the company as an employee depends on some operational units and related products. So is it possible to do outside the [Chronicle] manual process.

  Thanks in advance...

  Are you just wanting to restrict access to specific members to enter data to or it also includes being able to 'see' only the data based on some examples.  For example, in the type of financing plan, I have write access to the Dept 123 for all accounts of actual Net profit, I want they have read access to this Department?  In this case, I would make sure that specific effective accounts, that I make sure that the user/group has only read access.

  Thank you

  Mark

• Restrict the user to repeat a course after 24 hours

  Once the user does not have a class, then I would block during 24 hours, and after that this user restrictions can re-attempt of course failed. As I understand it, that is, there should be a user variable that would communicate with the LMS and tool Publisher SCORM. This variable must control the State of restriction. By any chance someone can give an overview of the generic user variable required. Or I'm all ears if there are other ways easy to address this scenario. Currently we use so that internal editor SCORM LMS, but the variable required should be generic in nature, right?

  You have to watch the LMS, I don't see an easy way to do it within Captivate at all. Perhaps with JS, but not sure