Tecra R10 - 14 c, model PTRB3E - start of SSD express card

Similar Questions

• Tecra R10 - 14 c - very slow start

  Hi all

  I have Tecra R10 - 14 c and with software recover Windows Vista Business 32-bit all the time when I turn on the laptop, it takes a long time (from 15 to 25 m) to start Windows, comes in turn on laptop. But when I restart Windows Notepad is normal startup.

  I try to install Windows Vista via the HD in Toshiba recovery software and the same problem. The problem when put after stopping, but reboot is normal startup and very quickly.

  Please help me

  Hey Buddy,

  If you start the computer after turning off your laptop hangs on a certain point? What is exactly different for restart?

  For Windows it's not important if you stop or restart the computer that of the same. I can only imagine the laptop hangs on the Toshiba BIOS screen, is this correct?

• Upgrade CPU on Tecra R10

  I wonder if someone might be able to answer a question for me.

  I have a beautiful Tecra R10-11 b and he's been very good for quite a few years. It works under Win XP and did everything he asked without problem.

  I want to know, however, is if it is possible to mount a faster processor. I have a suspicion that the installed processor can be fixed permanently and is not replaceable, but I'd like to know.

  I had played with the idea of replacing the P9400 Intel Core Duo with something a bit new, so maybe install Win 7 and more memory. There are 3 GB of ram installed.

  Any suggestion would be appreciated.

  Parkman

  The CPU is bad, which means that the processor is removable.
  But important fact is that the manufacturers of portable don t CPU upgrade support.
  One of the main reasons is the BIOS which is especially modified by the manufacturers of cell phones.

  But let's start with a few basics:
  The CPU must be supported by the BIOS and chipset.

  So let's ' s check what CPU would be taken in charge by Mobile Intel GS45 Express Chipset, which is part of the Tecra R10 - 11 b
  Here on this page of the Ark from Intel, you can find compatible processors
  http://Ark.Intel.com/products/35505/Intel-82GS45-graphics-and-memory-controller-hub#@compatibility

  But even if the chipset would support new CPUS, some compatibility issues may appear because of the BIOS.
  However, the Intel Core 2 Duo CPU (Penryn Montevina) processor have been equipped in different models of R10, so probably other Intel Core 2 Duo processors are supported.

  By the way: the RAM can be upgraded up to 4 GB of RAM

• TECRA R10 - how to make an image of NORTON GHOST 15 to the network

  Hello

  Here are the steps to enable NORTON GHOST 15 bootable CD make a TOSHIBA TECRA R10 image to a shared network folder. I guess that this same procedure also works on many other TOSHIBA models, but it of the model I and could test.

  (A) download the site WEB of Toshiba drivers following for TECRA R10, Windows XP, LAN drivers (Version INMA20W32W9C)
  File: lan-20081015154144. ZIP
  Link: Link: [http://support1.toshiba-tro.de/tedd-files2/0/lan-20081015154144.ZIP]

  (B) insert a pen drive and create a folder named example * X:\NIC*, where X: is your pen drive letter.

  (C) unzip * lan-20081015154144. ZIP * and a copy of this file on a pen drive only the following files:

  -e1y6032.inf
  -e1y6032.sys
  -e1y6032.cat
  -e1y6032.din
  -NicCo26.dll
  -NicInstQ.dll
  -e1000msg.dll

  (D) not to remove the disk from the pen and insert the CD bootable Norton GHOST 15 on the CD player. If it starts, click option * output *.

  (E) stop your laptop.

  (F) power and on the first moments, press * F12 * display boot source options. Select * CD * icon using the left and right keys and press on * ENTRY *.

  (G) confirm that you want to boot from the CD by pressing any key

  (H) to accept the Symantec License Agreement

  (I) tab left * utilities * and click on entry * load a driver *.

  (J) use the mouse to select * computer * and open your USB (e :))

  (K) navigate to the folder * F:\NIC* and open the file * e1y6032.inf*. You should receive message * the selected driver has been loaded correctly *.

  (L) tab left * network *, click on * start my Networking Services *. You should not receive any error message.

  (M) on the same tab, select * Ping address *. Insert the IP address of your computer and it should ping.

  (N) tab left * House *, click on * Back Up My Computer *, * following * and insert the Norton (e.g. 99-9999-9999-999999) license key.

  (O) to select the disks that you want to backup, then click on * following *.

  (P) click on * Browse Network Neighborhood * select computer and the shared target folder. If necessary, you can create your own folder.
  (NOTE: shared folder must have write permissions.) On my QNAP NAS system, I need add the everyone permission in the target folder.

  (Q) click on * following * and I suggest selecting * check the recovery point after creating * and type a brief description of the State of your system

  (R) click on * following * and * finished *.

  (S) backup starts and ends with the message: * full backup: XX:XX:XX *.

  (T) remove the CD disk and a pen. Click on * output * and confirm that the computer may restart.

  (U) you have now a complete picture of you system, without installing any software. It woks with all versions of Windows including Windows 7 Ultimate 64 bit.

  I hope that this text could be useful to your work.

  Good luck.

  Antonio Nuno

  Very well!!!

  Thanks for sharing your experience with us!

  Could be useful to others!

• Tecra R10 - Summers - you happy?

  Hello

  I think buying a Tecra R10 with integrated graphics. I read a few reviews on the net, and they look quite good. However, I want the user experience of the users of the real world.

  Are you satisfied with your Tecra R10?
  It runs too hot?
  The build quality is as good as Toshiba sells?
  How about the screen?
  No other complaints?

  Finally, it is easy to open for cleaning?

  Thanks for your help!

  I set a place for a friend and had a play with it for a few days, and I am very impressed with the R10.

  Are you satisfied with your Tecra R10? Yes, the performance and the quality is amazing (this is the SSD model so the start time are blistering fast :))
  It runs too hot? No, the CPU base and effective magnesium keeps cool.
  The build quality is as good as Toshiba sells? The build quality is similar to my Tecra A9, which feels solid and well designed, quality of the materials.
  How about the screen? The screen is a new type of LED, which has the better contrast than normal FL Tube screens. I am satisfied with the picture quality.
  No other complaints? Honestly I can't think of a thing wrong with it. I think to buy one myself.
  Finally, it is easy to open for cleaning? There is a door on the base of the laptop where you can access and clean the radiator. I wish my Tecra A9 had this feature.

• Tecra R10 - 10W - CMOS battery error and the next mistake of bios password

  I have some old Tecra R10 - 10W

  Aftert long in the cupboard, it says CMOS battery error and after charging I can't start on the old password (bios) system.

  How to reset the password of the bios and is also required for cmos battery and I can do it myself?

  I thank...

  You can change battery cmos your np for bios pasword use google auto, I hand a mini hp with the same problem and initiated a program that has been reset using error code when it is inserted the wrong password 3 times into the line, then I used the error code in the program and got the password restarted hp and password inserted now is job bp. Do I have also an old tecra and difrend problem with it, everything in good standing sims but used laptop start first ferry, after several restarsts shovs splash screen, then runing bp, restarted again, same story, it restarts several and then is runing again, leading with outside the same monitor thing, ideas?
  Here is the link for your problem and sulution: http://dogber1.blogspot.com/2009/05/table-of-reverse-engineered-bios.html

• Tecra R10 - TrueSuite Access Manager doesn't work with IE8

  Fingerprint software does not start after you install Internet Explorer 8 in my Tecra R10 TrueSuite Access Manager stops working that is when I open a site that requires the login/password.

  I've updated the TrueSuite Access Manager to the latest version 2.5.28.0 but the problem remains. From the console to access the password Bank Manager the program stops responding.

  Operating system: Vista Bussiness 32 bit
  Internet Explorer: 8.0.6001.18702
  TrueSuite Access Manager: 2.5.28.0

  Does anyone have an idea of the problem?

  Thank you.

  Hello

  Have you tested with IE7?
  Did this happen using the preinstalled Toshiba OS and Windows with IE7?

  If this n t happens using the IE7 while there may be a compatibility issue between the two parties; IE8 and TrueSuite Access Manager.

• Tecra R10 - 14 d - 3 G Internet no longer works after update drivers

  I have a Tecra R10 - 14 d with 3G modem PTRB3E internal Ericson F3507g and I did an upgrade to 3G and Wireless Manager 5.6 modem drivers at 6, and after that I upgraded loss of internet access.

  The upgrade was without any error. The Wireless Manager connects successfully to the internet, but internet provider does not work.

  I tried to find previous versions of Wireless Manager and drivers to downgrade Toshiba without success. Just found the latest version that causes this problem.

  What is there? The new version may not be compatible with my computer?

  Thank you best regards &,.
  Rui

  Hello Rui

  You have downloaded this driver from toshiba support page?
  Have you tried to roll back OS to an earlier time using System Restore tool?

• Tecra R10 - how to remove the memory module?

  Hello!

  How to remove the memory module?

  Get the following message and for me, it means that one of the modules is broken:

  Out of memory error
  Address = H 00034000
  Read Date = H 28034000
  Write data = H 00034000

  For my opinion, the computer should start up again when I remove the memory broken slice?

  The Australia has soon

  Hello

  You can easily remove the memory modules.
  I think that the Bay is placed at the bottom of the unit.
  Remove the screw that is blocking the Bay, and you will have access to the module.

  Here is a video of how do this on another Satellite L500 laptop. But the procedure is not very different on Tecra R10
  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=81

  I hope this helps a little

• Need a specification complete for Tecra R10 - 147

  Hello!
  Can someone give me please the specifications (especially for the 3G chip embedded) for my Tecra R10-147.
  I need some specific technical information that I can't find anywhere on the net. Tecra model doesn't even exist on the Toshiba site. I'm french, and perhaps that is an exclusive model for the France or Europe.
  Thank you

  Matt

  It is not easy to find the complete specification.
  I'm sure you know what components are inside.

  About 3G I just make it is - 3 G HSPA FOR EU - 7.2/2.0MBPS DIVERSITY and supports the European region.

  What do you want exactly?

• Broadband Tecra R10 - 10J 3G problem

  I have a new Toshiba Tecra R10 - 10J

  I can't operate the 3G.
  I put my 3 G SIM card in the slot (behind the battery)

  High-speed 3G Toshiba F3507G appears three times in the device (network card, modem and com port) Manager

  However, when I start the Wireless Manager, the 3G device is not recognized!

  Thanks for your help

  Concerning

  Thanks for this second info
  In many cases the computer reboot laptop new solves many strange problems ;)

• Tecra R10-111: cannot install the Wireless Manager

  Hey guys,.

  don't know why, but when I install the Manager wireless on my Tecra R10-111 Wireless Manager can be started, but not a second later, the program ends. The only option I have is to accept and put an end to the program press OK.

  I have two versions of win7 on my laptop.

  1 is the original version of Toshiba Win7 OEM, who has been on the laptop.
  --> Here, it works without probs
  --> All updated etc.

  2. is it a full Version of Win7 bought and downloaded in a microsoft store.
  --> Here it doesn't work anymore!
  --> All updated etc.

  Earlier Versions of the Wireless Manager has worked in two partitions with Win Vista and for some time, I remember that he has worked with both versions of Win7.

  What is the problem with that? Toshiba has to provide updates and drivers that work with any version of Win7 and not only with the OEM Toshiba.

  Any suggestions?

  See you soon
  Australia

  > What is it with this? Toshiba has to provide updates and drivers that work with any version of Win7 and not only with the OEM Toshiba.

  Do you think that it is a problem of the tool?
  This seems to work on Toshiba pre-installed OS, so it cannot be a question of tool!

  Maybe a part of the software is missing on the MS Win 7 own

  Have you installed the update of Firmware for 3 G Module?
  This Firmware update is necessary to obtain more stability in your 3 G connection with your Ericsson 3 G module.

  Have you installed the registry patches that are available on the page of the Toshiba driver?
  Do this!

  Good luck

• Tecra R10 and Windows 7

  Tomorrow, I'll get a Tecra with the following specifications:

  Tecra R10 - 14 d
  Type: Processador Intel® Core 2 com tecnologia vPro AP9400, ligacao of rede e Intel® GS45 Express Intel® WiFi Link 5100
  Watch speed: 2.40 GHz
  FSB: 1066 MHz
  level 2: 6 MB cache
  OS: Windows Vista® Business 32 - bit Edition Genuino (pre-wont, recovering HARD disk Toshiba)

  http://PT.computers.Toshiba-Europe.com/innovation/product/Tecra-R10-14d/1071135/toshibaShop/false

  Thus, it comes with W_Vista. Can I just update it W_7 or not? Do I need a driver or something to do the update?

  Very appreciated for any response.

  Best
  Naim

  When you receive your laptop, as a first step please installation of recovery discs using the preinstalled Toshiba Recovery Disk Creator.
  With other words: start preinstalled Vista and DO NOT install Win7 version clean or something because you lose the ability to create recovery discs. These discs you can use in the future if you want to have once again the factory settings.

  Back to your question:
  Tecra R10 is fully supported for Win7 and you have two options. You can do Win7 upgrade using the Toshiba upgrade kit, or you can install install Win7 clean and clean using the facilities of Microsoft disc. If you take decision clean OS install all drivers, tools and utilities that you can find on Toshiba page under http://eu.computers.toshiba-europe.com for assistance

  To be honest I prefer the new installation of the OS.

• User manual to fix Tecra A50-A-151, model No. PT644E

  Hello
  When you try to download the user manual for a Tecra A50-A-151, model No. PT644E, I offer three choices.

  How can there be three?

  Although they have posting dates different all three appear to be the same and labelled 'first edition August 2013', even if they have different file names.

  Who is the right one and how do I know which figure in the 'Grand Tour' is supposed to be an A50 - A and nothing else? (I do not have an A50 - in front of me.)

  Thank you.

  I'm also a little confused about this but I checked two of them and I think they are the same, so I think you can make a big mistake if you download a first or second.

  Great ride is the same.

  You have questions on this model Tecra? Maybe someone of us can help you.

• Windows 8 on the TECRA M11 - necessary review models

  I want to Bay upgrade of Windows 8 pre-control for Windows 7 or XP computers and install it on my Tecra M11 - 13 X model. I was wondering if it will work properly - of course, I think especially on drivers?

  Maybe someone has tested Windows 8 on Tecra M11 in windows program to participate and can help me?

  I'll be very grateful for any answer!

  I put t see serious reasons why win 8 should not work on the Tecra M11

  But since Win 8 is not officially on the market (it takes a few days), you will have to wait for some customers and drivers of Toshiba