Results for: Microsoft product: Windows operating system; Version: 6.0.6000.16386; Event ID: 1530; Event source: Microsoft-Windows-user profiles Service

Similar Questions

• Windows operating system; Version: 6.0.6000.16386; Event ID: 200; Event source: Microsoft-Windows-Diagnostics-Performance;

  Windows operating system; Version: 6.0.6000.16386; Event ID:200; Event source: Microsoft-Windows-Diagnostics-Performance; This error arose mutiple times in the last month but has critics in the last days. How the world I remedy this? Thank you

  Hello

  Apologize for the delay in response. Please see the following link that talks about this problem:

  http://social.technet.Microsoft.com/wiki/contents/articles/3186.event-ID-200-Windows-Diagnostics-performance.aspx

  Note: The information mentioned in the link is also applicable to the Windows Vista operating system.

  Clean boot Warning: Take care to put the MSCONFIG Utility to Normal startup once you are done with the troubleshooting steps.

  Hope the information is useful. Back to us for assistance.

• Get an error "event ID: 1515"; Event source: Microsoft-Windows-user profiles Service

  * Original title: Windows operating system; Version: 6.1.7600.16385; Event ID: 1515; Event source: Microsoft-Windows-user profiles Service

  I get this error message: Windows operating system; Version: 6.1.7600.16385; Event ID: 1515; Event source: Service with event ID 1511 Microsoft-Windows-user profiles. I tried to find a solution but have not been able to find something with this specific question. I am currently connected with a temp file but will lose any information when disconnected. I am the only user on this computer. Recently, I replaced my card motherboard and CPU and reactivated windows by phone. Thanks for any help.

  Yes, Mr President, I think that's how I got the profiles of other users in my registry. I knew that when I replaced my motherboard there is a chance that I have to reinstall my operating system. I was happy when I was not at, but after trying to correct the mistakes, I bit the bullit and reinstalled.

• Cannot connect to the system Windows - user profile service failed to connect

  I can't connect my laptop for the 1st time

  I get an e-mail from the user profile failed to connect

  User profile cannot be loaded

  Ideas please

  If you have a Toshiba SSD in your laptop there is a problem in windows 7, making it impossible to connect to the system when the storage TOSHIBA utilities are installed. In this case, you will need to find a way to get the system and uninstalling.

• Spectrum 13.3 x 360: 10 Windows user profile Service service has sign-in

  Hello!

  I can't sign in my office on my laptop. I get an error "Unable to load the user profile."

  I can't get into Windows to change the registry.  The laptop goes directly from the HP logo to the Windows login screen.

  Hello

  Try the following.

  First, use another PC to create a bootable Windows 10 DVD or a USB Flash drive via the following link.  Under the section "Imperative to create a cable USB, DVD or ISO", download the media creation tool.

  http://www.Microsoft.com/en-us/software-download/Windows10

  Once you have it, run the tool, select 'Create the installation media for another PC', then select the language edition of Windows 10 and 64-bit.

  Follow the rest of the guests to create this and then click on finish when done.

  Insert the Installation of Windows 10 support and stop the laptop by pressing the power button for 10 seconds.

  Click next to the ESC key as soon as you press the power button to enter the Boot Menu, and then select the Boot Options Menu ( f9 ).

  Use the arrow keys to highlight the CDROM (uefi) or USB Flash Driver (uefi) option, according to the type of media you created, then press on enter – if you are prompted to "Press any key to continue...". "- make.

  Start on the Menu of Boot Options Advanced - see Option 5 on the link below for more information on access to this.

  http://www.tenforums.com/tutorials/2294-advanced-startup-options-boot-Windows-10-a.html#Option5

  Then try to run the Windows system restore to return the laptop to a point in time before this problem occurred - see Option 1 on the link below for more information on this procedure.

  http://www.tenforums.com/tutorials/4588-system-restore-Windows-10-a.html

  Kind regards

  DP - K

• Doesn't have to start Windows user profile Service

  Hello.. When turn on the laptop, the user profile could not connect to windows... How can I fix...

  Thank you..

  See this post - http://answers.microsoft.com/en-us/windows/forum/windows_7-system/logging-on/4c9045a4-2ca3-4384-afc2-c17b2f725f47 - if it's the same problem there are a few suggestions to try to including a restore safe mode.

  I do not know what causes this problem, but it seems quite common.

• Windows operating system; Version: 6.1.7600.16385; Event ID: 129; Event source: nvstor64

  I get many (a few seconds) the event logs and find my pc won't start, or takes a long time, I have just bought two weeks ago. I looked towards the top of the event id, says reset for device 0 raid port.

  What is the problem? His windows 7 64 bit card mother msi, 4 GB of ram. 1 gig dedicated ati radeon 4650 e pci 16 graphics card. There is no new firmware available from nvidia motherboard, I have th elatest. I restored my system, and it seems to start ok now, but I'm still getting this event, 33 000 of them, log in 5 days. It began on 4/16. Can I use the dvd system and reinstall windows 7? IM so frustrated, I have an old hp 560 w, he ran as a champion for 9 years, children use now, never had no problem I pay top dollar for agaming system, and having problems during the weeks served. I did some research before buying for several weeks. He has rave reviews, I thought I got the tone righ, I guess not. Please advise if you can.

  No it doesn't have asolution, nobody does, but, I finally solved it, I used the MSI (my manufacturer moboard) live update 4, he ran, it updated my firmware and bios, now I have nomore freezes or nvstor 64 events, thanks to God, im so happy. Try it, MSI LIVE UPDATE 4, itys on msi site. Bad sleep well that night: p lol.

• Dell inspiron E1505 with Windows Vista system restore to factory setting led by mistake. The operating system version is incompatible with Startup Repair tool

  I tried to restore my Dell Inspiron E1505 laptop to the factory setting.  I pressed F8 then selected repair and then Dell Factory Image Restore.  Used to format hard drive.  He formatted the hard drive and then he restored the system.  Suddenly, a small window pops up without any details, but saying "error".  I restarted the laptop, it entered into Startup Repair mode.  But even once showed error "operating system version is incompatible with startup repair".  I don't have my windows CD/DVD.  Although the windows sticker is still on the laptop.  Please advise me how to install the system on the laptop so I can use the same.  Please note that I am in Gurgaon (India).

  Thank you

  Hello

  Because the computer is located in a no start situation and you don't have the installation disc, it is best to contact the manufacturer for assistance.

• If I've already upgraded to 8.1, can I install my 8 on another computer for updating an older operating system Vista?

  If I've already upgraded to 8.1, can I install my 8 on another computer for updating an older operating system Vista?

  Original title: Windows 8

  The game, February 6, 2014 21:06:21 + 0000, giebeman wrote:

  If I've already upgraded to 8.1, can I install my 8 on another computer for updating an older operating system Vista?

  Lol just a license, not two.

  In addition, even if you had two licenses, you couldn't do that. You can
  not upgraded from Vista to Windows 8. You can do a cleaning
  installation.

• Update Windows guard invites me to install the update of security for Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package (KB2538242) after I have already installed.

  Update Windows guard invites me to install the update of security for Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package (KB2538242) after I have already installed.

  Hello

  Thanks for posting in answers.microsoft.com

  So that we can fix that Mr is that we do a clean boot using msconfig

  1. Click Start, click Run, and type "msconfig".
  2. In msconfig go to services and hide all microsoft services, once's done it to disable all other services
  3. in msconfig again go to the Startup tab and disable all startup programs
  4. Restart the computer anddo updates

• KB2467175 is repeatedly installed through Windows Update - update of security for Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package

  Original title: title of what I have just a question

  I have correctly installed a security update for Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package (KB2467175)

  Download size: 2.6 MB

  You may have to restart your computer for this update is taken into account.

  Update type: Important

  A security issue has been identified in leading to vulnerability MFC application into DLL planting due to not specify the full path to the location/DLL MFC system.  You can protect your computer by installing this update from Microsoft.  After you install this item, you may have to restart your computer.

  More information:
  http://go.Microsoft.com/fwlink/?LinkId=209556

  Help and Support:
  http://support.Microsoft.com

  but it keeps giving me the same update again and again... How many times this update must be installed b4, I can move the following? I should be ready for servicepack2 now

  Discover this answer for the solution to this problem:

  http://answers.Microsoft.com/en-us/IE/Forum/IE9-Windows_7/i-keep-getting-a-update-to-do-KB2467175-i-have/714d90fb-9666-E011-8dfc-68b599b31bf5?page=1&TM=1303918560113#footer

• Which phones Blackberry works for other phones and operating systems when creating themes? (Please read)

  I build themes and I want to support all devices.  I know that if I build a theme on a device and

  Operating system that will work for other devices and operating systems.

  Can someone tell me what base unit will be other devices?

  example: Bold 9700 will work with the Bold 9650, 9000 "BOLD" and so on (it was just an example and probably inaccurate)

  Thank you for your help in advance

  Hello

  Just a quick note... 9700 themes work with 5.0 screen 480 x 360 OS (89xx, 96xx) dimension and visa versa 96xx and 89xx 5.0 OS themes will work on the 9700

  85xx theme OS 5.0 works on 83xx 5.0 OS visa versa 83xx 5.0 OS themes will work on the 85xx with an OS 5.0 but remember the layout of the 83xx series is very different the 85xx, such as dialogs etc... If the theme of predict a 83xx look like funny on the 85xx, which means that the old layout

  Storm 1 themes 5.0 OS will work on the Storm 2 and visa versa as it is exported OS 5.0

  And it's just like all the other models have screen sizes different etc. such as the Pearl, the torch and the Flip

  I hope this has helped!

• Windows 7 operation system__ 'service user profile Service has no connection. User profile cannot be loaded. » __

  Windows 7 operating system
  When you turn on the computer, I get the login screen normal showing my profile name and asking my password.  When you enter the password, I get:
  "User profile Service service has no connection.  User profile cannot be loaded. »
  Then the machine disconnects me and returns to the request for the password screen.  Unable to get beyond this point.

  This error can usually be fixed by following the steps below. All this requires a certain level of computer skills. You know better and that take the machine to a competent local computer tech (not a type of BigComputerStore/GeekSquad place) is the best solution for you.

  1 log on to a different user account with administrative privileges. If you neglected to make an account additional administrative steps 2-3. Otherwise, continue to step 4. See also General information on setting up the accounts of users at the end of this post.

  2 in Mode safe boot. This, by repeatedly pressing the F8 key as the computer starts. That you will get to the menu on the right where you can use your arrow key to select Mode safe [Enter]. The built-in Administrator account is disabled by default in Windows 7. However, if no other administrative accounts exist on the system it can be activated. If this is the case, you will see an icon for the administrator on the homescreen mode without failure. Login to the administrator.

  3 If you don't see the icon for the administrator mode safe account, then the built-in Administrator account is always disabled so you will need to work more. If you have a Windows 7 DVD installation (not a recovery DVDs), you can start the system with it. Select the default language, then select "repair your computer". Then select "Command Prompt". At the command prompt, type:

  NET user administrator / Active: Yes [Enter]

  [Note: do not enter the brackets!]

  If you do not have an installation DVD (only have a recovery disk), the computer mftr. may have given you the option to repair the system Windows 7 (not a system recovery!) in the menu diagnosis. This menu of diagnosis is the same one where you can choose Safe Mode.  Or you can make a bootable DVD of Windows 7 repair of the file on this link:

  http://NeoSmart.net/blog/2009/Windows-7-system-repair-discs/

  Note: All the Neosmart recovery disk downloads are torrent files. There is a good explanation of the torrent on the site Web of Neosmart files. You will need a torrent as muTorrent client to get the files. Torrent client will download the .iso file with which to create the bootable DVD. If you create the bootable DVD in an older operating system, you need third-party burning like Nero, Roxio or free ImgBurn software to burn the .iso image image file, not in the form of data. Windows 7 can burn the .isos natively.

  Now, remove the rescue DVD you made, restart windows system and log into the built-in Administrator account, you enabled.

  4. try a system restore to when things worked. If you can log in to your user account, you are finished. Otherwise, continue to step 5.

  5. the critical files are under % systemdrive%\users\user-account\ntuser. The ntuser.dat file is actually a registry hive. Run Regedit high and select HKEY_USERS and "load hive" in the menu. Now, go to:

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList

  There is a line for each profile. If a profile is bad, check:

  (a) that the name of the key does not stop in ".bak" (remove .bak If it)
  (b) that the RefCount value is 0 (change it if it is different)
  (c) that the State value is 0 (change if different)

  Make the necessary changes, close Regedit and try to connect as this user.

  6. If that doesn't solve your profile, it is corrupt. When you do that, you should make a new Standard user account and copy your data to it. Do not delete the old account until you have recovered data you need!

  Once everything works, go to the additional administrative account you will be made by the suggestions below and disable the administrator account integrated yet for security reasons:

  Start Orb > Search box > type: cmd
  When cmd appears in the above results, right-click and choose "Run as Administrator" [OK]. Now, you will get the command prompt. At the command prompt, type:

  NET user administrator / active: No. [Enter]

  Exit the command prompt.

  General recommendations for creating users in Windows 7

  You absolutely don't want to have only one user account. Like XP, Vista and all the other modern operating systems, Windows 7 is a multi-user system with integrated system of accounts as default Administrator and comments. These accounts should be left alone because they are part of the structure of the operating system.

  In particular, you do not want account only one user with administrator privileges in Windows 7 because the administrator account integrated (normally only used in emergencies) is disabled by default. If you use as an administrator for your daily work, and this account is corrupt, things will be difficult. It is not impossible to activate the built-in administrator to rescue things, but it can be more work you want to do. Better not to put you in a bad situation at first.

  The user account that is for your daily work must be a Standard user, with the extra administrative user (call it something like 'CompAdmin' or 'Tech' or similar) only it for elevation purposes. As a user Standard is recommended for security reasons and will help protect your computer against infections. After you have created "CompAdmin", connect to it and change your normal user account Standard. Then log on to your regular account.

  If you want to go directly to the desktop and ignore the Welcome screen with the icons of the user accounts, you can do this:

  Start Orb > Search box > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null).
  MS - MVP - Elephant Boy computers - don't panic!

• A security update for Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package (KB2538242): why he moved?

  A security update for Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package (KB2538242)

  keep having this element appear in the updated list although I already installed it several times. Whenever I have install it said installed successfully but when I proceed to close the item pop up on the list has once again stated that I need to install this point before closing down. This is a problem for the last month 1, help?

  Refer to this post that addresses a similar issue and follow the suggestion given by Kosh Vorlon - a regular contributor here.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/kb2538242-this-particular-update-is-installed/794fe18f-4F65-404A-8361-68c6d6ef6a22>

  `~`

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  For enterprise customers, support for security updates is available through your usual support contacts.

  `~`

  How to hide an update in Windows 7

  A. click the Start button, click principally made programs, and then click Windows Update.

  (B) in the left pane, click check for update.

  C. after receiving the results of the analysis, please click to see the available updates under the install updates button.

  D. Please right- click the update (KB2538242), and then click hide update.

  06/21 / 1112:00:53

• Errors when trying to install KB2251481 - update of security for Microsoft Visual Studio 2005 Service Pack 1 XML Editor

  I try to install the KB2251481update:

  Update of security for Microsoft Visual Studio 2005 Service Pack 1 XML Editor

  When I run it on my computer in the Panel of control/updates section to update, it fails. I get an error from the A66 without details.

  Here's a screenshot of the error of the A66.

  I am running Vista Home Premium.

  It has been suggested for this A66 error to go to the section control/uninstall Panel, click on the "MS .net Framework 4 Client Profile" and fix it. I did it successfully. I tried to run the update again; and he failed again with the error of the A66.

  I read a post on another forum of MS who suggested downloading the patch here:

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=26383

  I downloaded and tried to run. I read the description. He said it was for VS 2005 for Vista.
  He failed. I got another error:

  "The upgrade patch cannot be installed by the Windows Installer service because the program to be upgraded is may be missing or the upgrade patch may update a different version of the program. Verify that the program to be upgraded exists on your computer and that you have the correct upgrade patch. »

  Here is a screenshot on my account Flickr of this error.

  Can anyone help with these errors so that I can install the update for Visual Studio 2005?
  Am I missing something?
  I can provide more information?

  Marz

  Solution for the problem of installation KB2251481 here:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_update/KB2251481-security-update-for-Microsoft-Visual/be3135e1-b1ed-4430-BE22-1aaf8485c249