Results of the seller of the addition of RDBMS in invalid package

Similar Questions

• Remove additional results of the previous step

  Hello world

  I have a step of the 'statement' (step 1) inside a while loop that creates an additional result to the stage (using Step.AdditionalResults.CustomResults.Insert).  For each row in the While loop this 'statement' step will create a new additional result.  After step 1, I want to delete the additional result created in step 1.  If I don't delete it, after each loop my report file will include all previous results additional loop.

  Is there a way to remove the additional result created in step 1?

  Thank you very much!

  Review the attached file in sequence.  Why don't you just use the same result?  Why do you need to insert and remove every time?

  Can you send me this sequence you sent the screenshot?  This way I can get a better feel what you are doing.

• Be a mistake to create an additional result in the Table UUT_Results:

  Research site of NOR and found information on how to create additional value of loggin in the UUT_Result table.  I copied and saved the database.seq, and the standard process model.  parameter has been added to database.seq.  parameter added to the recall, then added a local variable to the model.  I did all the steps in order, then check the schema was OK and the journaling property has been added.  I always get the following error message and don't know if a step is missed.

  An error occurred calling "LogUUTResult" in "ITSDBLog" of "ZNIUGOL TestStand database logging"
  An error occurred when setting a column value.
  Statement: UUT_RESULT.
  Column: WO_NUMBER
  Property: measure. [Measure 1]
  Name of variable or unknown property 'Logging.WO_Number '.

  Source: TSDBLog

  Error code:-17306; Name of variable or an unknown property.

  Geographical area: step 'Journal USE result' sequence 'SequenceFilePostResultListEntry' in 'SequentialModel2.seq '.

  I think I had two different problems.  I was able to connect additional content under the UUT_Results, but I had to change my settings for database logging.  I disabled additional results, and everything started working.  I have always had a problem with the activation of the additional results box and never gave a reason why.  This occurs with standard features.

  If the last error noted the activation of additional results, so I disabled and was able to get my full database table.

  Thanks for the reply.

• A Message in a rectangular box "Messages Agent wants to use the 'Local products' kenchain. appearing on the screen and ask for Keychain password password.  This started after I changed the password of Apple resulting for the purchase of a new iPhone

  A Message in the box 1. "Message agent wants to use the 'Local products' kenchain. "is appearing on the screen and ask for Keychain password password.  This started after I changed the password of Apple resulting for the purchase of a new iPhone.

  My iPhone 5 has been damaged and the screen was not visible.  As a result, I couldn't open the iPhone.  I bought 5 s iPhone and when I got to connect with the iCloud

  I remember the answers to security questions.   The seller must change the password and enter new answers to security questions, I did.  This happened in Bangalore.  When I'm home in Ernakulam, Kochi (India), where I has the Air of Mac, Ipad and my wife had another iPhone and laptop computer Dell, these problems began to come up on the screen and blocks the screen.

  Four Messages are appearing: the first is on the top.

  Other messages are:

  2. ' cloudd wants to use the kenchain 'local products '. '

  appearing on the screen and ask for Keychain password password.

  3. ' com.apple.iCloudHelper.xpc wants to use the kenchain 'local products '. appearing on the screen and ask for Keychain password password.

  4. ' cloudpaired wants to use the kenchain 'local products '. ' is appearing on the screen and ask for Keychain password password.

  It of an upheaval and please suggest how to solve this problem

  Hello remy!

  I see that you are either prompted by iCloud Keychain with various alert messages.  I know it's important to have iCloud Keychain works correctly and I am pleased to offer you an article that should help you.  Please follow the instructions in the following support article:

  If your Mac keeps asking for the password in the keychain

  Thank you for using communities of Apple Support.

  See you soon!

• Satellite L655-11J - result of the memory of the Windows experience index

  The results are
  Processor: 6.9
  Memory RAM: 5.9
  Graphics: 6.7
  G game: 6.7
  Hard disk: 5.9 Toshiba mk5059GSXP

  The result of the memory is too low?

  Hey,.

  Why is the result of memory too low? The score is still good scores even other parts are better.

  In addition, the Windows experience index is not important in my opinion. You can see a few numbers at the end, but what to do with it? I don't see a reason to make such a test if I convinced and satisfied with my computer. Who care about these things other landmarks? ;)

• Number of the results in the report variable

  Hello everyone,

  I need help in TestStand reports. I use TestStand 2014 and 2014 of Labview, both 32 bits.

  The situation is like this: I am running a test with test steps 3. The first stage of the test is a step of "additional results" which records the device under test info (versions of the hardware software etc...). This information appear in the report and the result data in the database (table prop_result). The next 2 steps are the steps 'real' which measures something.

  In the report, there is a call from the variable "Number of results" (see the screen attached capture) and you see a '3 '. There are actually only 2 steps of 'real' test as I don't want to consider the first step of "additional results" as a test step. How can we affect the variable 'Number of results' so that it does not count this first step? I tried to use the properties-> Run Options-> record result of the for Option set to "Disable". It works and the number of results appeared as "2", but the device under test info do not appear in the report and not in the prop_result of the database table.

  In general, how can I get the number of results of account not a step, but continues to display the result in the database and report? Is there an API where I can access and modify its value (number of results value) such as: "Number of results" - 1?

  Hope someone can point me in the right direction. I have attached the release of the report, as well as the file in the sequence.

  Yours,

  chati

  I ment, you can change the XML seq.--> \Components\Models\TestStandModels\reportgen_xml.seq generator (Ref http://www.ni.com/white-paper/3977/en/).

  It's the AddReportHeader, you need to change. Or more specific step 9 (in teststand 2012) which is a statement-->

  Parameters.ReportHeader += "<" +="" fileglobals.reportelementname="" +="" "="" type='UUT' "="" +="" "="" title='" + ResStr("MODEL", "RPT_HEADER_TITLE") + "' "="" +="" "="" link='" + Locals.UUTItemNameForLink + "' "="" +="" "="" uutresult='" + Str(Locals.Status) + "' "="" +="" "="" stepcount='" + Str(Parameters.StepCount) + "' "="" +="" "="">\r\n".

  and then, you can modify the varabel StepCount using some filtering by using for example a subsequnce that counts only the type of measures that your customer wants to be counted.

  There might be ways esier there, but that's what I'd do.

• Comparison of the results of the performance and the sum of the sum of array elements

  I did a comparison of the performance of "Add table" with 2 other methods (an Add elements and function of ddot BLAS) to see who was the fastest and also to compare their results, given that I was watching a few slight differences.

  Conclusions
  BLAS ddot's quicker (just a little), then add items, then add it in a loop of table

  BLAS ddot and add items table give identical results almost all the time.

  I don't know why add items in a loop manually gives a slightly different result. I understand there are any rounding due to finite precision errors, but why is it different for the 2 other methods?

  This classic of digital computing: the quality of the result depends on the order of operations.

  A simple example is the calculation of a * b / c with a, b, c equal to 25, 200 and 100 respectively. The result should be 50, but if a, b and c are U8, the result depends on the order of operation, as shown in the example below. DBL and data non-entier, the difference is of course that much smaller, but still there are!

  

  

  In your case, the difference also stems from the order of operations:

  -in the table add-in, the product of all the elements is calculated first and then the elements of the array are added.

  -in the loop, the addition is performed after each multiplication.

• Hide text conditionalized causes listed above show the additional list item

  So, I have a document I want to condition some sections for. It has section A which has a list of tasks in it followed by section B which also has a list of tasks. I want just condition section B so that it is not published, as the function what it documents is not ready yet.

  I've highlighted the section I want to condition and applies the condition (which brings us to the second problem of the no defined style not to State not displaying but that doesn't matter to the main issue).

  

  Then I text show/hide conditional and set the condition to be hidden. Here is the result:

  

  I now have an additional empty list item where I don't want one. How can I get rid of him?

  It seems that you did not include the end of the last task list paragraph mark in Section B. Which will cause the condition hidden marker inserted in the last paragraph numbered step.

  

  Compared to the selection of the brand at the end of paragraph in the last step:

  

  

• The right way to store the results of the query

  Hey wizards Oracle,.
  
  I have a few questions that take a long time to run. Given that the results of these queries change only once a day, I will execute queries every morning and store their results in a table.
  
  I was going to serialize them in chains to the CSV format and then store them as CLOB. But shit, Oracle is a data table, storage system! This is reinventing the wheel within a wheel.
  Then I thought about creating one table per query would be the right way to store their results. But ordinary tables data recovery would be slow, because I would need to create an additional of ORDER_BY column to maintain the order of the results of the query.
  
  It seems that there is a way to store varrays in the LOB columns, but it does not seem to be appropriate.
  There may be a caching mechanism that could help?
  
  Does anyone know the proper way to store the result of a query?

  What you describe is a reinvention of the materialized views.
  Have you considered using them?

  ----------
  Sybrand Bakker
  Senior Oracle DBA

• Smart collection returns different results to the library filter?

  This is such a stupid thing, and I barely noticed. I have smart collections simply gather all the images with a particular star of note, very very simple! I have a 1 star, a Star 2 and one for the 3 stars and more. So far so good, use these for centuries-, but I noticed that if I go to Catalog/All photos and place a filter of the same library (this is the filter at the top of the library grid view) I get different results. Actually if I place a filter attribute that says '= 2 stars' images only I can watch the tape that works at the bottom of the screen (sorry I have no idea what it's called) and he said that "all photos / 1056 1647 photos» If I can clear this filter and scroll down to my smart collection that applies the filter even to the entire catalog (and I triple checked this, no difference at all, I don't have lower or higher than the here is the self same "=" only!) and it says "1066"! Thus, the smart collection search 10 images more than other, identical filters working on the entire catalog - I am confused? Anyone had this problem, I missed something? If it wasn't for the number of images concerned I'd them and try to find the additional files by hand!

  Popular indices, and LR3 passing on Mac.

  Tim.

  You can check if the images are stacked differently (and thus not counted) in both points of view.

• Follow-up of the results of the quiz

  Hey everybody,

  Complete newbie to Captivate, just downloaded the demo today, as my work looking at branching out in e-learning. So far I found it quite easy to grasp and I see a lot of possibilities with him for us.

  My question is, Captivate is able to monitor the results of the questionnaire, once it has gone live? Can I monitor the performance of individuals via the unique logon ID or I'll be able to see a comprehensive statistics on the performance of quiz?

  Captivate is used for the creation or another platform is needed to track these results?

  Thanks for your help and excuse my lack of knowledge I am purely from a video background.

  You are right that Captivate is just a tool, not a LMS System.  And a few LMS include limited capabilities of creation.  But this means that the content is bolted into the LMS and cannot be purchased or used elsewhere.

  The most LMS capabilities are providing links to display the PPTs, PDFs, or documents, with the additional installation of a few quiz questions simple construction. They can't compare with the kind of interactive content Captivate can create, and they may not be advanced screen capture as Captivate.

  Captivate specializes in the side creation of courses and LMS are really specialized in the delivery and monitoring of content.  Most people in the corporate or academic world found that they all end up both need.

• Install the additional content does not

  Hello!

  Again and again, I tried to install the additional content in logic, but his does not work.

  I tried to install 2-3 in time, I tried to install everything at once.

  Nothing works.

  I restarted my computer, no difference.

  I looked up to find (for example) Mellotron in logic.
  Sound still not available.

  What I am doing wrong?

  

  When you press "Select the uninstalled all button" nothing will not be selected?

  

  You show that you have installed content.

  You can find it in the higher level of the library folder.

  See below - this which should solve it for you.

  

• How can I turn off default 1 search result in the awesome bar?

  Since the release of 43, it seems that the Awesome bar fills the first result as a generic 'visit' or 'Search' for anything typed in the bar. It's very frustrating because I know where I want to go, and my search history used to fill specific sites, I went to. This new feature to the Awesome Bar takes you is a generic search engine default search, or right on the first page for a specific site.

  For example, it may be a forum page that I regularly to. and in the latest Firefox would fill this page first in my results, which allows a fast navigation. However, the most recent update makes it do that the first result is a query to perform a generic search for what I typed in, or at best to take me to the first page of the site in question, make me have to either type the URL complete, favorite every page ever, I want to navigate to and just use bookmarks now or , or cross my fingers and pray that they default 1 result in the Awesome bar accurately reflects my wishes of navigation (which he never does).

  Is it possible to either:

  1. find the process that causes this 1 default result in the Awesome bar and disable/delete, preferably with extreme prejudice.

  2 prevent the features of Firefox that interacts with a browser default search?

  In its current form, I deliberately ignore the 1st result of the Awesome Bar, because it never fulfills what I want. Specifically, it will fill never I don't want things.

  Hi Danon72.

  To disable the 'Visit' item in the list, please edit the preference browser.urlbar.unifiedcomplete in The editor of Configuration of Firefox to false.

• Click on the result of the search, window opens then immediately closed

  Firefox on my desktop with windows 8.1 recently don't right notwork. After that I did a google search and click on the found result, Firefox opens a new window (this is the option you selected), and then immediately closed. This only occurs for some of the results. Others are okay. Also, if I click with the right button on the search results and let Firefox opens a new window, it works very well. Firefox on my laptop works very well too. Not sure what had happened.
  I uninstalled Firefox and reinstalled. The result is the same. I hope someone can help.

  FredMcD said

  Disable AdBlock by using the arrow next to its icon. Load this web page.
  Click the arrow, and then select disable on... Then enable AdBlock.

  BTW, what is the web page? AB should only block ads.

  I tried your method. This works. The funny thing is that if I unlock the Google search page, it solved the problem. The page had problem was:
  https://search.Yahoo.com/YHS/search?p=Time+Warner+Cable & ei = UTF - 8 & hspart = Mozilla & hsimp = YHS-001

• I perform a search, results, find the message I was looking for. How can I find this message in my folder structure and subfolder (relatively) complex?

  Hello
  I use structured system subfolder to keep my organized emails (hundreds and hundreds of folders).
  When I do a search, get the list of results and in this list, I found the email I was after, HOW can I find the message? In other words, how can I open the folder that contains this particular email?
  Thank you in advance for your time and effort.

  Right click on a folder, search for Messages, and then click 'Search subfolders', then enter the selection criteria, search, search for a result in the lower pane, then 'open folder '. The message is opened in the Message pane and the containing folder is highlighted in the folders pane.

  It isn't a global search and location does not show the full folder path, but it is another option. Note that the location column can also be displayed in the message search window.