Resurrect the closed work space

Similar Questions

• I have a problem with the closing work is not on the computer.

  Original title: Shutdown does not work completely

  I notice that my laptop was not actually shut down properly and my slow laptop. For me, I always leave my laptop sleep after that I go to bed or put me to sleep... and I realize that my laptop is slow... So I'll check what's happening... and I think my top time is 8 days so this means that my laptop was running 8 days non-stop... so I stop my laptop and check again and what happen it didn't reset high time and my laptop was totally slow... so I try to restart and the time taken has been reset. and my computer laptop back to normal, it runs smooth...

  The point is that we don't know what the judgment in fact do not? Shut down your laptop computer or PC will reset all default function, which means that all of your running application will be nearby. In this case the stop not reset all my app running at default.

  You can check by yourself:
  Select TASK MANAGER > PERFORMANCE and find the TIME 'UP', it appears like this "0:00:00:0" and the equivalent of days: hours: Minutes: second

  Hello

  It's because of the economy of functionality in Windows 8. By default, the computer is made to start or stop faster, which is not supported by most motherboards. Follow these steps and the PC starts normally.

  Windows 8 is a new feature called quick start. It can sometimes cause problems as you mentioned as well as others. The best way to know if the problem is to disable and see what happens.

  This feature works only when you make a STOP and then start. It does not affect a RESTART.

  To turn it off, follow these steps:

  1. press Windows key + X, go to the control panel > Power Options and select choose what the power buttons on the left.

  2. Select change settings that are currently unavailable, near the top center of the screen.

  3. lower in the window, uncheck the quick start.

  Hope this helps, keep us updated on the status of the issue.

• Form opens in Smart View through the planning work space

  Hi gurus,

  I have a 11.1.2.3 environment and I try to open a form of planning within the workspace by using the following steps: file-> open in SmartView.

  Just after that Excel will appear, I have the following error message:

  «The exchange rate of/Forms/00 taxes on income/MPP1001.00 - shape is not valid.» Check the log for details. »

  However, I have to open the form directly in SmartView without error.

  SmartView my version is 11.1.2.3.300 (build 157)

  Also, I already reset all aliases of location for the application of planning as follows:

  1. log in to the console Essbase Administration Services (EAS).

  2 right-click right the planning application database.

  3. Select Edition-> location alias.

  4. re-enter the password.

  5. Select TEST and make sure it is checked.

  6. Select Save.

  But the problem persists.

  Does anyone have this problem before? Do I have to apply a Patch SmartView?

  Thanks in advance.

  Concerning

  Hi Jasmine,.

  I have the solution, there's a blank space at the end of the name of the form. When I got out I open to SmartView.

  Thanks for your time.

  concerning

• lack of working space

  I loaded by Premiere Pro today and my workspace is not where. I get the Menu bar at the top, but the actual application window never appears (I always get the welcome box). I tried every shortcut I found on the forum to reset, Hung extra monitors to see if it was off the screen, but it isn't. I tried to create new projects, loading of the old projects, but it seems to never, new sequences, reset in the menu work space, but still no work space. Reinstall did nothing, the installation of cleaning did nothing.

  MacbookPro Oct 14

  10.10.5 OSX

  GeforceGT 750M

  Hi Susan,.

  Have you tried to update the graphics drivers again?

  CUDA for MAC drivers Archive | NVIDIA

  Once done go in the folder Documents and file rename Adobe at Old_Adobe.

  Go to the user library (hidden by default, so click on the menu in finder go hold opt key to make it visible.) and library > Application Support > Adobe, rename this folder as well

  Vinay

• Cannot connect two work spaces in the same browser window

  Hello
  Happy holidays to all. I have problem to identify two workspaces (associated with two diagrams) in a browser with two tabs in the browser. The situation as the following:
  
  -Using Internet Explorer 7.0 or Firefox
  -Login in A work space, associated with the AA scheme. (connect successfully)
  -Then, click New tab in the same browser window, log in the workspace B, associated with the schema BB. (connect successfully)
  - The tab of connection of space one was closed (kicks) automatically.
  
  If I open two separate browsers, I can connect a work space in the window of a browser and connect another workspace in a separate window, not tab.
  
  Why? Is somewhere, I missed setting or configuration for APEX? All advice is greatly appreciated.
  
  Candice

  You're right, you can't do that.

  Try using Firefox chrome and one for the other.

  Tyler Muth
  http://tylermuth.WordPress.com
  [Oracle security application: development of secure database and Middleware environments | http://sn.im/aos.book]

• The closed display mode is no longer works after update of the Sierra on my MBPro. Known bug?

  I use a vertical dock for awhile, so my MBPro retina works in closed with external display, KB and mouse display mode.

  But since I installed the update of the Sierra, the external display not Mac OS desktop.

  It only works when I open the built-in screen...

  The bug is known? Or y at - it a setting to adjust on the Sierra?

  Thank you in advance

  Hi darklemon,

  I understand that, since the update to Mac OS Sierra, you've been unable to use your MacBook Pro in closed view. I know it's important to use your computer in a way that suits you, then I'm happy to help you.

  Let's start by resetting your memory NVRAM and SMC which can often help with system display and related issues:

  How to reset the NVRAM on your Mac - Apple Support
  Reset the management system (SCM) controller on your Mac - Apple Support

  Once you have done this, follow the steps here to set up the closed display mode:

  Use your Mac laptop to view closed with an external display - Apple Support

  Thank you for using communities Support from Apple. See you soon!

• Hello, I have a big problem with Firefox: Session Manager & Undo Closed Tab addons don't work, synchronization is not working do not. The story works. How to solve this problem?

  Firefox remembers the story, but doesn't remember the closed tabs, sessions.
  It happened after the Fox update to v. 19.0.2 on a single computer.

  In Options of Firefox is set to use Custom Settings For History, everything is checked except always use Private Browsing Mode. So I'm not in private browsing.

  When I press to Undo Closed button nothing happens, & in the Manager session Save Session button is grayed. I tried to install other add-ons that remembers the tabs. tried to reinstall/disable these 2 modules. Did ' t help. On my 2nd computer I have same modules, same settings and they work normally. the 3rd closed computer undo works tabs also. How to solve this problem? I decided to ask before Firefox Reset...

  ----------------------------------------------------------------------------------------------------------------------------------------------------------------------
  

  Sync is a separate issue. It works, but quite often it connects me sync account. Then I can connect only using the recovery key password and long (option choice I have no device with me because he does not accept the key to pairing device).

  Thanks for reading.

  In case you use "clear history of Firefox closing:

  • do not erase browsing history
  • Tools > Options > privacy > Firefox will be: "Use the custom settings for history": [X] clear history of Firefox closing > settings
  • https://support.Mozilla.org/KB/clear+recent+history

  Note that compensation "Preferences of Site" clears all exceptions for cookies, images, windows pop up, installation of software and passwords.

• Get a spinning loading icon after I closed my iphone5, no reason for this? It lasts about 5 seconds. Other than the phone works normally.

  Whenever I closed my phone after about 3 seconds, I get a spinning loading icon on black background before his disappearance. Apart from that, the phone works fine. In my settings, it shows that a new software update is available, but since my connection is slow I decided to not updated for a while. Is something worrying?

  This spinning wheel on black background off is normal. Will occur if there is a software update.

• Secure the workspace / personal work space issue

  Hello

  http://docs.BlackBerry.com/en/smartphone_users/deliverables/47561/als1342454475197.jsp

  Based on the secure and personal workspace.

  I have an application that works perfectly well in the 'personal workspace". It can access PIN, etc email account, and there is no problem.

  Worksapce Secure: the app works that for secure electronic (BES 10 account). In this workspace, it cannot send PIN messages. I tried the code hard pine account information based on the personal workspace , but in the workspace secure but he simple does not work.

  (1) is this a feature where the secure workspace is only for secure electronic and not Message of pine?

  (2) in the personal account PIN of the workspace is visible in different types of Type::Messages account but in Secure, it shows only 2 accounts of secure e-mail and text Message account. No account of the Pine Message.

  Is this feature or bug in BlackBerry?

  (3) blackberry Hub in the secure workspace and the personal workspace , it shows the same content. Based on the docs Blackberry Hub for two workspaces must be different from the other.

  Can someone BlackBerry shed more light on this. I'd put logs with more information later with App running in secure work space and personal work space.

  Hello

  I received a reply from Blackberry on this issue. It all depends on how you define the work and personal work space. The setting is based on Blackberry Enterprise Server 10. Here is the pdf file

  http://Br.BlackBerry.com/content/dam/BlackBerry/PDF/BB10-regulated-EMM-datasheet.PDF

  Balance: Personal and work

  Regulated balance: personal and work but work has access to the PIN, sms etc.

  Direction: Work only. Work has access to everything.

  Under regulated enterprise-level mobility Blackberry 10 management control and setting , you will see different options for allows PIN SMS work or space. And then I guess her you should be able to have access to the PINS as well as SMS messages.

  I can confirm this once I have test the build that I have developed.

• Working space and the planning of the URL does not not after change of IP address

  Hi all

  I use 11.1.2.1 and recently the IP addresses of the servers have changed. Because of this schedule and the workspace URL does not work, although EE and shared services work. If I run the URL of space working everything freezes (EAS and shared services) and I have to stop/start services.

  Please suggest how to solve this problem.

  Thank you

  MK

  Well there is your problem then

• That's happened.  I allowed my PSCC update last night.  I opened the program this morning to make a few changes and my work space is gone.  My preferences are gone.  Instead to start my work, I need to spend time reorganizing.  A PAIN!

  That's happened.  I allowed my PSCC update last night.  I opened the program this morning to make a few changes and my work space is gone.  My preferences are gone.  Instead to start my work, I need to spend time reorganizing.  A PAIN!

  It's always a good idea to save and provide for system backups. All you have to do is pick up your Photoshop preferences. Don't copy a folder no big deal.

• Built-in color profile is not current RGB working space... someone knows why this appears when I try to open the picture?

  Built-in color profile is not current RGB working space... someone knows why this appears when I try to open the picture?

  He does not appear for all the photos; However, I use two photos of the same photo shoot and it will show the error message, we won't.

  It has nothing to do with the shooting or shooting is not in raw?

  Or opening in the bridge?

  I need someone to break the basics of what I am under the age of two years, if you please.

  Greatly appreciated!

  Thank you!

  It will happen when your Photoshop color settings (image 1) does not match your files.  The first thing to do is to check your color settings (Edit > parameters of color or shift-command-K).  You will see that mine is set to ProPhoto RGB.  When you use RAW files, you can set the desired picture profile by clicking on the link at the bottom of the window of Camera RAW, which will bring up the workflow Options (image 2).  Here, you can see that mine is set to ProPhoto RGB, which means I'm not all conflicts.  You will have the profile matches no window, when these are different.

  Most cameras have the possibility of sRGB and Adobe RGB for RAW files no, and when the RAW capture ignores this parameter allows to set in the workflow window.  I hope this helps.

  

  

• New to the Photoshop CC application. Want to set up my work space and can not find a way to do it. Suggestions/advice?

  How can I set up my work space?

  How can I create to-DOS? (just like previous versions of the PS?)

  I assume that you want to place some signs along the right edge. If this is the case choose window and check the panels you want to display. You can adjust their width and position. Most useful: when you are satisfied with the arrangement of the Panel, choose window > workspace > new workspace and save it. If, at any time, things move around you can set things right by choosing window > workspace > Reset [workspace name]

• Hello! I have CS5.5 Production Premium installed and now downloaded and installed CS6 PP Upg. Problem is the lack of space on the disk. What I can uninstall 5.5 or the Upg 6 should it work? I can move the 6 if necessary.

  Hello! I have CS5.5 Production Premium installed and now downloaded and installed CS6 PP Upg. Problem is the lack of space on the disk. What I can uninstall 5.5 or the Upg 6 should it work? I can move the 6 if necessary.

  Upgrades need not have the old version installed in order to work properly.  You can remove the old version if you wish.

• The fan works like a crazy and super fast drain battery after installation of Sierra

  I installed Sierra on my MacBook Pro, the fan works like crazy and the battery is empty after about 1.5 hours. Which never happened before. I'm only using Safari and Mail in the moment. I talked to Apple Support and they suggested to reset the SMC, but this brought no improvements. What can I do else? Again, I plan to install the El captain...

  I had this problem just after I installed Sierra on my MacBook Air.  First I tried to reset the SMC and the LANDAU.  This does not prevent fans constantly in the course of execution.  I then used the activity monitor to see what was possibly strain my system.  I noticed the "DCs" process was always sucking up to more than 90% of my CPU usage.  However, others said that it is normal after an upgrade of the OS and it should fall back down once the computer finishes its initial picture and analysis of the files.  So I run my MBA plugged nonstop for 36 hours in a row and the fans just kept running so that the process of "DCs" continued to drain at > 90% of CPU usage.  I also looked carefully at the activity monitor and saw that tasks such as analysis of photos had their own separate process "DCs".  So I dug further into what the devil "DCs" was really do with a lot of CPU resources.  Long story short, I found that there is some glitch in Sierra which causes the macOS stuck on a process involving the keychain and iCloud.

  That's what I did to fix this keychain/iCloud which led to "DCs" fans of triggering and overloading the CPU to be always on:

  -In the activity monitor, I used Force Quit to kill the process that involved the keychain

  -In the activity monitor, I then Force Quit the process that involved icloud

  -In activity monitor, I finally Force closed the process "DCs". (I found that I could not simply force quit 'DCs' without first allowing the keychain & iCloud first)

  -After all, I restarted the computer and fans were finally off the coast!  I open the activity monitor and saw that 'DCs' has is no longer hogging up the CPU usage.  Photoanalysis process were still running in the background at 40-50% CPU use with no trigger unwanted system fans.  the iCloud synchronization and my keychain also worked very well.

  I'm finally able to use Sierra without my fans blazing out of control.  It took me a while to get this sorted out.  Hope this helps to save you a few headaches and time until Apple can get counts that there is this Sierra software glitch they need to address.