Retrieve message to ESXi host Summary tab "Configuration issues."

Similar Questions

• PowerCLI messages question a high Summary tab

  Hello

  Is it possible to pull up messages on the top of the tab summary to a host computer via PowerCLI?

  Thank you

  Of course, try this

  foreach ($esx in (Get-VMHost | where {$_.})) {Extensiondata.ConfigIssue}))
  foreach ($issue in $esx. Extensiondata.ConfigIssue) {}
  Select - InputObject $issue @{N = "Name"; E = {$esx. Name}}, FullFormattedMessage
  }
  }

• 5.5 ESXi host adapter / card configuration

  I've been jumping for about half of the day now discussion, but have not found an answer that worked for me. I must again be seen on something. Here's my situation:

  ESXi 5.5 on a Dell server that has two physical network adapters. The management network was first configuration and all communications (pings, etc.) runs very well on it. [Standard vSwitch0 with 192.168.1x VMKernel Port vmk0 by vmnic0]

  Now that I've added [vSwitch1 with 192.168.3x vmk1 VMKernel Port via vmnic1] I can't communications to work.

  I'm sure I just address everything correctly, any public static IP, two lan affects two VM (Windows) and I even tried the 'promiscuous' mode Maybe it's something simple, but I can't get a grip on it. Anyone have any ideas on what I need to do to get my VM s able to communicate between two different networks through the ESxi server that is physically connected to two networks through its hardware NIC?

  Don't know how to explain that it worked, but it did. Once I converted a machine once again, with the version of VM to 8; I have had no problem Ping on both networks. I'll go forward with the second machine and try to confirm this today.

• Assess the VC with ESXi hosts

  Hello

  I have a number of ESXi hosts and want to evaluate VC and all the features of business with our existing ESXi hosts.

  In the documentation for the assessment of the VC2.5, it states that once installed VC and ESX3.5 no license requirements for the first 60 days and that all VI3 functions will be available during this period.

  It does not refer to ESXi and how these hosts must be configured (license config) for use with VC and all features, Vmotion, HA, DRS etc.

  My understanding is that ESXi hosts should be configured with the database server licenses to allow them to participate in the assessment, as features such as vmotion, etc. require VC/license server bases. Obviously if I was evaluating ESX3.5 then no config would be necessary because it also allows all the features for the first 60 days. ESXi is however not evaluated and thus does not give access to the full functionality for 60 days.

  How should the environment be configured to allow the use of CR 60 days eval with ESXi hosts using all the features - vmotion, HA and DRS.

  Please can someone explain this for me?

  Even when assessing the VC, you need to install a license server is placed just in evaluation mode - this is the server licenses as dolse on DBS licenses, HA and vMotion.

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• Configure the firewall on the esxi host 4

  Team Kia Ora

  I built an esxi host 4 on a piece of the material I had to hang around, as you do!

  I'm eager to open ports in firewall on the host.  I can't tick all the ports incoming and outgoing, I need tab of safety profile VC client (configuration of the host), and then select Properties.  Also the esxcfg-firewall command is missing, even when I use a UMA VMware to place orders RCI to the host, there doesn't seem to be available.   ?:|

  See attachment "... - nzwlg - stack - 1.png".

  On esx 3.5 or esx 4, I use the host configuration SecurityProfile tab, select Properties, click on the appropriate ports and in and facts. This feature seems to have moved/missing?

  Also, strangeness, is that I have another esxi installation 4 which has the parameters display correctly under the Securityh profile | Properties tab. ?  (attachment "... - nzwlg - pile2.png")

  Any help greatly appreciated and have a great week! =)

  ESXi have exhibited extensively in terms of services. All software tools to use must specifically support ESXi.

• Update VSAN task configuration failed for ALL 3 ESXI hosts

  I enabled VSANS on the cluster, but the task of updating VSAN configuration failed with the below error

  Operation failed, the diagnostic report: not associate the host to the cluster VSAN (Exec command "/etc/init.d/vsanvpd restart" succeeded, but came back with zero State: 1).

  On all esxi hosts 3, I can see a warning

  Host is in an active VSAN cluster but doesn't have a Service of active VSAN

  Please help me fix this isseu... I need all the VSAN here experts... I do not find a troubleshooting for this issue.

  This information was supposed to do in the VSAN Release Notes, although I must admit that I don't check that they exist.

  Here's a post I made on the memory requirements which came into force for GA

  Part 14 & #8211 VSAN. Memory of the host requirements. CormacHogan.com

• Backup of ESXi host configurations

  When you use the host profiles, what is the best way to save specific ESXi hosts?  Your host profile standardizes the host configuration, but if you need to restore your ESXi host for a reason, even after the application of the host profile must be configured to the specific IP, hostname, etc of the host.

  Assume that you have an installation of VMware enterprise with 50 + guests.  Is there a good way to automate the backup and restoration of specific configurations of different ESXi hosts?  RCLI scripts? VMware Assistant management scripts? Some 3rd party management software tools?  Your ideas / popular experiences. (In this environment Auto-déployer has been dismissed as a management option)

  Thank you

  Yep, answer files are a feature of the host profile and do not depend on deploy Auto.

  Automatic deployment takes just left this feature also.

• Configure Passthrough in ESXi host for USB Dongle?

  Hello

  You have to connect a USB dongle to a virtual machine specific.

  On the web, we find that we can plug the dongle to 5 ESXi host.  For this particular virtual machine, add USB controller and then add the USB device.

  We wonder if we were to "Configure Passthrough" in "Advanced settings" of the ESXi host?  If so, is there an easy way for us to identify the particular USB port used?

  Thank you

  Post edited by: TonyJK

  Hello

  If you want to only connect the USB dongle to a virtual machine, add a USB controller to the virtual computer is simpler. Once you have added a USB controller, turn on the virtual machine. Plug the dongle on the ESXi host. Open the page change the setting of this virtual machine, add a USB device and you should be able to find the dongle in the list. Save the settings and your virtual machine can now access the dongle.

  Martin

• script to find configuration of esxi host problems.

  Need a script to find if all configuration host on all issues the esxi host in the vCenter...

  example: alert, warning.

  Hello, nareshunik-

  You can consult the properties TriggeredAlarmState and ConfigIssue to display HostSystem for the VMHost objects, such as:

  Get-View -ViewType HostSystem -Property Name,TriggeredAlarmState,ConfigIssue | ?{$_.TriggeredAlarmState -or $_.ConfigIssue} | `    select name,         @{n="NumConfigIssues"; e={($_.ConfigIssue | Measure-Object).Count}},        @{n="NumAlarms"; e={($_.TriggeredAlarmState | Measure-Object).Count}}
  

  This will return just all hosts with a triggered alarm, a configuration problem or two (and the course of each):

  Name       NumConfigIssues  NumAlarms
  ----       ---------------  ---------
  myHost001                1          0
  myHost122                2          0
  myHost212                1          1
  

  How does do for you?

• ESXI hosts 5-2 and the best way to configure vSwitch and Nic redundancy

  Hi all

  Could someone help me find the best way to configure the vNetwork on 2 5 ESXI host for redundancy.  Once I managed to correctly configure the 2 hosts I will seek to use the same installation process for 6 guests.  3 sites with 2 hosts on each site managed all of vCentre Server

  I have 2 DL380 G7 servers 5 ESXI installed on a class 10, 8 GB SD card, I'm looking to install VSA on the 2 hosts on each server with 4 TB of internal storage (8 * 600 GB 10 k SAS).  Each server has a gigabit integrated 4-port NIC and I installed a 2nd NIC gigabit PCIe 4 ports, I also x 2 16 switches of port with Layer 3 routing.  I use vSphere 5 Standard acceleration Kit I am looking to use vCentre server for managing, vMotion for maintenance, HA for the failover and VM 10/15 (vCentre Server Std, DB SQL to vCentre Server, Exchange 2010, SQL Server 2008 R2, IIS Intranet, Helpdesk, 1 DC, 2 Domain Controller, AV Server, WSUS, SCCM Server, and Terminal Server server).

  What would be the best way to install and configure the network for performance and redundancy and am I missing something?

  My thoughts are, Teaming: -.

  vCenter - vswitch0 - port1 on NIC1 and port1 on NIC 2 - port1 on NIC1 to physical switch 1 - port1 on NIC2 to physical switch 2

  vMotion - vswitch1 - port2 on NIC1 and port2on NIC 2 - port2 on NIC1 to physical switch 1 - port2 on NIC2 to physical switch 2

  HA - vswitch3 - port3 on NIC1 and port3on NIC 2 - port3 on NIC1 physics 1 - port3 on NIC2 to physical switch 2 switch

  VM - vswitch4 - port4 on NIC1 and port4on NIC 2 - port4 on NIC1 to physical switch 1 - port4 on NIC2 to physical switch 2

  or do I need an additional NIC on each server to hit the VM 12-6 VM for 2 ports on 2 NETWORK interface card, or maybe something else I missed?

  Thank you

  In your case, to keep it simple and what I can say here is what would be my recommendation:

  3 standard vSwitches

  vSwitch0:

  • Management - vmnic0, vmnic2

  vSwitch1:

  • vMotion - vmnic1, vmnic3

  vSwitch2:

  • VM network - vmnic4, vmnic5, vmnic6, vmnic7

  The only reason why that I didn't split the VM in other network adapters shipped is because the difference in the types of the DL380 adapter shipped and the PCIe quad.

• ESXi host change IP back to the old Configuration in vCenter

  Hi all! I'm having a problem with a host computer in my vCenter. I had 2 guests and both were in the same network. I moved to a remote site and change its IP from 10.10.2.253 to 10.10.3.250.

  While I'm trying to connect it to the vCenter, he connects well then (in vCenter) he's trying to connect to his old address IP 10.10.2.253.

  I have reset the vCenter, database, but it still does not work. When I move first the host at the remote site, I did not disconnect. I deleted it just (may be the source of this problem).

  Can someone help me on this one? A big thank you.

  Hi Alex,

  is it possible for you to create a record of host DNS (A) for this remote ESXi host name and then add to vCenter using its FULL domain name rather than IP address?

• Attempt vSwitch configuration change and now the ESXi host and virtual machines offline

  So I have no doubt, I have myself to blame for this one. I was trying to change my vSwitch from 100 Mbps to 1000 Mbps when an 'operation timed' error out jumps-to the top and my vCenter Server lost connection with my ESXi host. I tried to restart the host manually, but that did not help. The host is not the ping requests and all the virtual machines on that host are offline; None of them vMotion off to my other ESX Server.

  I tried to reconnect the host computer in vCenter, but it is obviously does not connect because it can't ping it. I logged the ESXi console and all the network settings appear to be correct. I'm used to connect to the ESX console where you can execute commands, but it's my first ESXi host, so I don't know what I can do.

  Any help is greatly appreciated!

  -D.

  If you had your management port and VMs on different vSwitches / NIC leave on framework would eliminate a false positive. As in your case the management port reportedly follows the cable / about speed, but the virtual machine network would be intact (and I'm assuming that your storage space as well).  In this case the VMs system would have worked very well even if the management port did not work.

  Dave

  VMware communities user moderator

  Now available - vSphere Quick Start Guide

  You have a system or a PCI with VMDirectPath?  Submit your specifications to Officieux VMDirectPath HCL.

• 8.3 OMSA @ ESXi 6.0 U2 @ R515-> cannot log into the website OMSA to ESXi HOST.--

  Hello guys.

  I've updated my ESXi of U3 5.0 to 6.0 U2 and I lost my OMSA. I can not connect from the web page.

  For the update of the host, I used this ISO file:
  . VMware-VMvisor-Installer-6.0.0.update02-3620759.x86_64-Dell_Customized-A00.iso

  After that, I installed OM-SrvAdmin-Dell-Web-WINX64-8.3.0-1908_A00. EXE to a VM W2012S to this host. I can open the web site to connect, but when I try to connect to my ESXi HOST, I received this message: failed to connect... connection error.

  When I saw that I began to check a few things, I ran: 'list of vib software esxcli' and I saw:
  Name Version Date seller installation acceptance level
  ----------------------------- ----------------------------------- ------ ---------------- ------------
  ...
  OpenManage 8.3.0.ESXi600-0000 Dell PartnerSupported 2016-07-29
  Reference Dell-configuration-vib 6.0 - 2A 00 Dell PartnerSupported 2016-07-29
  iSM 2.3.0.ESXi600 - 0000 Dell PartnerSupported 2016-07-29
  ...

  Another very strange for me, is that I can't see any reading of the sensors to Interface web server: HOST /... / or Vsphere Client.
  But I can read a large number of web page Idrac and ESXi SSH data using ' esxcli ipmi sdr list material.
  Node-sensor Description-reading raw reading of raw Timestamp/comment base calculated entity Instance
  ----------- --------------------------------- --------------- ---------------- ----------- ----------- ------------------- ---
  0.1 1 Temp 3.1 processor 38 degrees C 166 2016-08 - 01 T 14: 18:32
  0.2 2 Temp 3.2 processor 34 degrees C 162 2016-08 - 01 T 14: 18:32
  0.5 power 1 10.1 Temp 40 degrees C 168 2016-08 - 01 T 14: 18:32
  0.6 power 2 Temp 10.2 37 degrees C 165 2016-08 - 01 T 14: 18:32
  0.7 power Supply 2 Temp ambient 10.2 26 degrees C 154 2016-08 - 01 T 14: 18:32
  0.8 power Supply 2 Temp ambient 10.2 28 degrees C 156 2016-08 - 01 T 14: 18:32
  0.12 system Board 1 BIO Temp 7.1 44 degrees C 172 2016 - 08-01 T 14: 18:32
  0.14 front Panel Board 1 Temp ambient 12.1 16 degrees C 144 2016-08 - 01 T 14: 18:32
  0.13 system Board 1 Temp Planar 7.1 28 degrees C 156 2016-08 - 01 T 14: 18:32
  0.10 memory Module 1 Temp 8.1 24 degrees C 152 2016-08 - 01 T 14: 18:32
  0.11 memory Module 2 Temp 8.2 36 degrees C 164 2016-08 - 01 T 14: 18:32
  System of 0.48 to edge 1 FAN MOD 1A RPM 7.1 2760 RPM 23 2016-08 - 01 T 14: 18:32
  System to 0.49 to edge 1 FAN 1 b MOD RPM 7.1 0 RPM 0-2016 - 08-01 T 14: 18:32
  System of 0.50 to edge 1 FAN 2 a MOD RPM 7.1 2760 RPM 23 2016-08 - 01 T 14: 18:32
  System of 0.51 to edge 1 FAN 2 b MOD RPM 7.1 0 RPM 0-2016 - 08-01 T 14: 18:32
  System of 0.52 to edge 1 FAN MOD 3A RPM 7.1 2760 RPM 23 2016-08 - 01 T 14: 18:32
  System of 0.53 to edge 1 FAN 3 b MOD RPM 7.1 0 RPM 0-2016 - 08-01 T 14: 18:32
  System of 0.54 to edge 1 FAN MOD 4A RPM 7.1 2760 RPM 23 2016-08 - 01 T 14: 18:32
  System of 0.55 to edge 1 FAN MOD 4 b RPM 7.1 0 RPM 0-2016 - 08-01 T 14: 18:32
  System of 0.56 to edge 1 FAN MOD 5A RPM 7.1 2760 RPM 23 2016-08 - 01 T 14: 18:32
  System of 0.57 to edge 1 FAN MOD 5 b RPM 7.1 0 RPM 0-2016 - 08-01 T 14: 18:32
  Power supply 0.148 1 1 current 10.1 0.6 amps 15 2016-08 - 01 T 14: 18:32
  Power 0,149 2 current 10.2 2 0.48 amps 12 2016-08 - 01 T 14: 18:32
  0.150 1 power supply 1 10.1 206 Volts 103 2016-08 - 01 T 14: 18:32
  0.151 power 2 2 10.2 206 Volts 103 2016-08 - 01 T 14: 18:32
  System of 0,152 onboard System 7.1 220 Watts 22 2016-08 - 01 T 14-1 level: 18:32

  The details of the server are:
  BIOS 2.3.0
  IDRAC 2.85 (Build 04)
  Lifecycle controller 1.7.5.4

  Any kind of help to connect to the host ESXi OMSA is welcome!

  This is the correct service.

• 6u2 ESXi host nested on VMware Workstation for Linux referee v12

  Hello all, I have

  I have a lab environment virtual running in VMware Workstation for Linux v12, and my ESXi hosts do not work correctly on one of the virtual networks. All my troubleshooting suggests a problem with nested ESXi hosts that may be a bug, but I want to assure you that I did everything properly first. That's why I post here with the hope that if I made a mistake that maybe someone else can point out he me.

  Physical system

  8 core Intel Xeon 2.1 GHz CPU

  128 GB of RAM

  OS - kernel Linux 64 - bit w/3.19.0-32-generic Linux Mint 17.3 (fully updated from this announcement)

  VMware Workstation 12 Pro - 12.1.1. Build-3770994 (fully updated from this announcement)

  Nested ESXi host VM

  ESXi v6.0.0 (Build 3825889, completely updated from this announcement)

  4 cards 'physical' (only 3 used for now)

  -all use the e1000 NIC hardware virtual, but also tried vmxnet3 NIC with no difference

  -vSwitch0 use vmnic0 & 1 vmnet16 of virtual network in a pair of active / standby

  -vSwitch1 uses vmnic2 on network virtual vmnet18

  -vmk0 used for management on vSwitch0 and vmk1 for iSCSI on vSwitch1

  -"Promiscuous" mode and forged passes enabled on all Port vSwitch groups (activating or turning off these features makes no difference)

  Test performed until now

  I checked that all the IP addresses and network masks used are correct.

  With the help of vmkping I ping other nodes on the network vmnet16 with success.

  With the help of vmkping I tried to ping the other nodes in the network vmnet18, but that has failed.

  I have depolyed other non - ESXi VMs on the vmnet18 network, and they are able to ping each other, but are unable to ping or ping by the ESXI host.

  I tried various material virtual NIC as mentioned before, but without changes in the results.

  I tried to use only local network instead of the vmnet18 guest network segments with no change in results.

  When I find out the status of the network adapters on the ESXi host through vCenter or host incorporated client vmnic0 & 1 time display network information, but vmnic2 shows no networks. Yet, I know that there is a network with different VM communicate on it. Moreover, I was able to get all of this work on a Windows system running 10 Workstation (this is the laptop that my employer gives me with).

  Having built nested ESXi labs on different platforms as well as physical environments in the past, I'm very confused as to why I can't get this special configuration to work. At this point my gut tells me that this is probably a bug any with the nested themselves ESXi hosts. Since I can get all this work on vmnet16 including the management of ESXi hosts and the VCSA that I use, I am sure that my vSwitch configuration is correct (other than the IP address space and vmnic configurations is bascially the same). Because I can get other virtual machines to communicate over the network vmnet18 I don't see how can be a VMware Workstation for the issue physical Linux host. Is there something obvious I'm missing here? I read on the ESXi hosts nested under VMware Workstation after having known problems and bugs with networking. If anyone else has experienced this?

  Thanks for any help others can provide!

  Kind regards

  Patrick

  Well, the problem is now resolved. The problem was what covelli was trying to explain, but I couldn't because the physical host network adapters being mentioned.

  The problem on the Linux host, but it was a problem of permissions with the virtual Ethernet adapters. The following article has the fix:
  With the help of Ethernet virtual cards in Promiscuous Mode on a Linux host (287) | VMware KB

  Even if I launched the workstation under the root user I have yet met this problem and which still makes no sense to me, but change the permissions solve the problem. I was not getting an error message on my Linux Mint and Ubuntu system, but when I tried on a second box of Linux Mint that I just got the error has been generated, and the error message was the above link it contains.

  So, here's what I learned:

  (1) the question has nothing to with a VMware Workstation definition that you can configure.

  (2) the question has nothing to do with a physical network card.
  (3) the question has nothing to do with any vmnic on the nested ESXi host.

  (4) apparently virtual Ethernet adapters are not the correct permissions when created.

  All you have to do to fix this is:

  (1) open a terminal.

  (2) run the command ' sudo chmod a + rw/dev/vmnet * "(don't forget to run this each time that you create a new virtual network).

  You can also create a group, as shown in the link above and simply give this group the correct permissions. Personally, I think it's easier to just give everyone the rw permission.

  I appreciate the help that others have offered. I did not understand what was asked for in previous answers because of the terms that have been used.

• 6.0 ESXi hosts are no longer

  Hello world!

  I have a problem with VMware ESXi 6.0.

  I have a VMware Cluster with 3 6.0 ESXi host. Last night 2 ESXi host has become unresponsive. ESXi hosts concerned, responds to the ping, but unplug vCenter, unable to connect directly to the client host with vSphere and unresponsive on DCUI. The VMs - running concerned guests - became unresponsive (VMware HA cannot restart VMs, because the host has locked the VMs file). Only solution: reset the hosts. After hard reset hosts, HA restart VM on another host and host affected normal work. The problem occurd when high e / s (backup, at the level of the files inside the virtual machine) on HBA.

  In the /var/log/vmkernel.log , I see a lot of messages both "crash":

  WARNING: lpfc: lpfc_sli_issue_abort:9956: 1:3169 Abort failed: Abort INP: data: x 0 xcd0 x 8 x 98

  ScsiPath: 7133: Set retry timeout for demolition of TaskMgmt failed for CmdSN 0x0, State failure, path vmhba5:C0:T0:L0

  The configuration of the hosts:

  Host type: IBM x 3850 X 5

  VMware version: Lenovo ESXi 6.0 custom + VMware ESXi 6.0 Express Patch 2

  CF: 2 * Emulex LightPulse FC SCSI 10.4.236.0 IBM 0494 42 8 GB 2-port PCIe FC HBA for System x Emulex firmware version: 2.02X11 version of the Emulex driver: 10.4.236.0 - 1OEM.600.0.0.2159203

  The host firmware versions are later.

  VMware installed on a USB stick (clean install, not upgraded), LOG dir on the CF data store.

  The storage and the side FC switches have no error/warning message.

  I see the VMware KB 2086025 and 2125904. In this KB article the symptoms are very similar to our situation, but our guests have the most recent version of the Emulex driver (KB articles: version prior to 10.2.340.18, our 10.4.236.0 version)

  I tried the latest Emulex firmware (version: 10.6.126.0, install and reboot host) but the host crash again and the same newspaper as above.

  Today a new problem, when I collect information on diagnosis (registers of export) of the host:

  • first of all welcome: unplug vCenter for seconds 3 times (State of heartbeat), and download of the newspaper failed, when the host disconnect, virtual machines (which run on this host) does not not on LAN
  • second host: connect download start, after the 10-minute purple screen:

  

  I have found no solution.

  Any ideas?

  Thanks for your help!

  Have you seen the question of host unresponse before 6.0 updated. If not, I suspect strongly this is due to "VMware KB: ESXi 6.0 the network connectivity is lost with the NETDEV WATCHDOG timeouts in the vmkernel.log". Try upgrading to the latest version 6.0 that contains the fix for this.

  The purple screen could be a different product bug and I doubt that it does not always happen. Based on the screenshot, it looks like collection Journal (vm-support) was going through some of the nodes of the VSI and failed at this point. So this issue could happen specifically only during some invocation of vm-support. Good to raise a complaint with the help of VMware.