Retrieve the Message selected Application messages

Similar Questions

• How do to retrieve the message not sent wrong email address

  I need to change the address of electronic mail for a message not sent - how can I retrieve the original e-mail so I can change the bad e e-mail address and or copy the letter sent

  It is impossible not to have an Outbox.

  

• When you type an e-mail, I think I hit the 'Save as draft' button by mistake. Now I can't find how to retrieve the message. Any suggestions?

  I was typing an email and press the 'Save as draft' button by mistake. Now I don't know how to recover the message. Any suggestions for anyone?

  Or in the menu button, there should be an option "folders." Look for the drafts folder.

• Could not retrieve the message date

  I tried to show the date of receipt of a message in two ways, first with Message.getReceivedDate () and on the other hand with Message.getHeader ("DATE"). When I try and view the dates with one of these methods, my program stops and nothing is displayed. There are other elements that must be displayed on the screen, but are not. Here is the code I tried:

                                      try {
                                          message1 = currStore.list()[i].getMessages()[0];
                                      } catch (Exception e) {
                                      }
                                      for (int j=0; j < message1.getHeader("DATE").length; j++) {
                                          folderScreen.add(new LabelField(message1.getHeader("DATE")[j]));
                                      }
  

          SimpleDateFormat sdFormat2 = new SimpleDateFormat("h:mma");
          DateField dateField=null;
          try {
              messages = folder.getMessages();
          } catch (Exception e) {
          }
  
          if (messages.length >0) {
              dateField = new DateField ("", messages[messages.length-1].getReceivedDate().getTime(), sdFormat2);
          }
          Dialog.alert(dateField.toString());
  

  What I find really puzzled, it's that when I commented the line of folderScreen.add () in the first piece of code, the rest of the items on the screen appear as expected. In the second piece of code, the screen appears as expected when the Dialog.alert line is commented out. The debugger does not all exceptions or other errors.

  I use JDE 6.0.0 with the Simulator v6.0.0.396 9800, 9800 v6.0.0.246 peripheral.

  Getting the date of the message is crucial to my project. I'm trying to recover the incorrect date? Is there another way to extract the date?

  Thank you

  Scott

  Crisis averted. I've never understood why the first block of code has failed (I suspect because 'DATE' is not a valid header field), but the problem in the second block was that I was using Dialog.alert. I have it displayed via LabelField and it worked. Still confused, but I'm able to go forward now.

  Thanks anyway,

  Scott

• Failed to retrieve the multi selection of values using the child form

  Hi all
  
  I'm a newbie on OIM 11 g. Need a small suggestion.
  
  I have a requirement that I need to display a list of all services and the user can select more than one Department. Based on the need of some departments to pick up employees of the departments.
  
  I created the child form and added an attribute to retrieve the departments of Looups.
  Added the child form to your Parent process.
  
  
  Can someone help me by providing the next steps to achieve this functionality.
  
  
  Thank you
  SG

  Do not know if I understood your request correctly or not, but here are my understanding:

  You have users associated with different users. You want to set up users in some RO and why you created a few model numbers for select users.

  I hope that you have some kind of relationship between departments and users
  Have a single Dataset Parent
  Create a child Dataset and have two search boxes - a Department and second for the user
  Use search queries to select user based on the selected service in Field1
  Field2 be required i.e. user

  In the same way, create two processes form Parent and child. Child form will have two fields. You can create text fields.
  After approval, the data selected on dataset will come to your child process
  Create corresponding task of the trigger for INSERTION in the definition of the process that will read data from child to process the form and arrangement of these users. (Research Forum or go through Oracle Docs to learn more about these triggers to child form)

• Sign of # Smartphone blackBerry works not in retrieving the messages voice home

  I tried the ALT key and the SHIFT key with the Q key / # and my voicemail telling me that it doesn't recognize the number I dialed.  Help, please

  just press the Q key # without ALT or Shift.

• GetWindowLongPtr function to retrieve the handle to application

  Hello world

  I used the following line to get the handle to the window of my windProc application

  HINSTANCE appHandle = GetWindowLongPtr (hWnd, GWLP_HINSTANCE);

  promptly, which returned an error saying that "a long value cannot be used to initialize an entity of type HINSTANCE. But when I used the word HINSTANCE as return type, it ends up being fine.

  HINSTANCE appHandle = (HINSTANCE) GetWindowLongPtr (hWnd, GWLP_HINSTANCE);

  I know that the return value is changed when I do this. But I'm curious to know why I have to do exclusively. HINSTANCE is not a long_ptr type? In fact the same thing happened earlier when I tried to assign the function of GetStockBrush to app.hbrBackground. He obliged to specify the return type as HBRUSH.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Uninstall the CS6 selected Applications

  CS6 Production Premium Suite

  Win7x64

  I want to uninstall some of the CS6 applications, but not all.

  Average verified fact remove or not remove application?

  Thanks in advance.

  

  Audited elements must indicate to uninstall.

• Dell v715w - cannot retrieve the application list from your computer

  I have a new desktop WIN7 64 bit Voastro (replaced a dimension on XP) I can't use the printer control panel to scan.  I get is unable to retrieve the list of applications on your computer on the screen of the printer.

  Have reinstalled the printer at least 3 times now with different downloaded drivers from the original printer disk

  I've seen a lot of posts on here for similar problems, but none seems to have a definitive solutiuon for this problem.

  Any help much appreciated!

  Thank you - sdgconc

  Hello

  Thanks for the reply.

  Please disable the firewall on the computer and check if the printer works fine.

  If parsing is successful after you turn off the firewall, please add printer Dell as an exception to the firewall.

  If the search was unsuccessful, please follow the steps below:

  Click Start > Control Panel > devices and printer > printer right click and select Properties.

  

  Select the Ports tab in the printer properties window, and then configure the Port.

  Printer IP appears in the Port configuration window.

  

  Enter the printer's IP address in the browser to log on to the website of the printer.
   
  Click on Configuration and management of home network analysis.

  Then click on start > all programs > Dell printers > the home printer settings tab > network computer name.

  

  

  Remove the scan to PC host.

  

  Please let me know if you use printer wireless or USB cable.

  In case you use wireless printer, try it please I scan a document with the printer connected via USB cable.

  Thank you & best regards
  Mustapha S
  #iworkfordell

• AMQP: Messages blocked because of the message of unack'ed

  Hello

  We took the library/AMQP samples/waiting for a message - changed, that it runs inside a loop, as we wish permanently if subscribe to messages in a queue of RabbitMQ. This is the behavior that we noticed:

  1 works very well for a long time without any problems for the following sequence of events:

  -publish the message to the queue (a customer outside)

  -vCO retrieves the message above

  -publish the message to the queue (a customer outside)

  -vCO retrieves the message above

  ...

  2 problem when there are multiple messages publishes both from outside:

  -publish say 10 messages in queue (a customer outside) - while the Subscriber is running inside vCO

  -vCO resumes the first message

  -vCO is blocked pending (although there are nine several messages waiting to be picked up)

  When I try to debug it via console RabbitMQ, I see that there is a message unack'ed that blocks all messages to be treated. Now when I do a "Force close connection" rabbitmq console, it moves more with maybe one or two messages more and then meet again with the same question.

  This isn't a problem when I run a publishing server and the Subscriber of the external vCO. I'm guessing that there is a problem with the part of the automatic acknowledgement in the AMQP plugin.

  Appreciate if you could look at what is the question. It is always reproducible at my end.

  See you soon,.

  Shashi

  Hello

  There was a problem with the plugin AMQP with receiving messages using a trigger. You happen to know the exact version of the plugin are you using?

  I can try to send you a version that contains the fix.

  Kind regards

  Julian

• Retrieve the selected text

  Hello

  I just know how I can retrieve the text selected via the Menu:

  I add a MenuItem to the category system so that it is available everywhere:

  ... ApplicationMenuItemRepository.getInstance().addMenuItem(ApplicationMenuItemRepository.MENUITEM_SYSTEM,this);...
  

  Then after that I selected the text in the browser for example, I click on the Menu button:

  public Object run(Object context) {
    if ( context instanceof ) {
      //do something with the selected Text    ...
    }
  }
  

  It should allow me to do something with the text I've selected. What instance is that the text of selected?

  Can someone help me here?

  Thank you in advance!

          if (fld.isSelectionCopyable()){
              Clipboard cd = Clipboard.getClipboard();
              fld.selectionCopy(cd);
              Object s3 = cd.get();
          //(....)
  

  On the second reading of your code, you do not use the Clipboard correctly. Try the above.

• When you try to install my new Embird program I get the message "this link must be opened with an application, select application. What does that mean?

  Help, I hope that I've not messed up, too bad!

  Help, I have a small embroidery business and have used a program called Embird.  Yesterday, I downloaded an upgrade for this program. It said to uninstall the old program before installing the new, so I did.  Now when I try to install the new one it says this link must be opened with an application, select application.  I have no idea what it means that someone can help me?  I tried to restore the computer to a date prior to just start all over hoping he would restore the old Embird, it says that the file may be damaged and will not work.

  If you were able to 'merge', you have unzipped the file somehow.  What was all the messages when you did the merger?

  Follow these steps:

  1 information about the particular file in question

  Right-click on the downloaded file, and select Properties.  What does say for 'File Type' and what is the 3-letter file extension (after the point)?

  If there is no file extension, find the file using Windows Explorer, and then click Tools > Folder Options > view.  Uncheck "Hide extensions for known file types" and click OK.  Now, look at the file again for the file extension.

  2. test of exe files

  Click Start > run, then type notepad in the "open" box, then click OK
  Didn't open a Notepad window?  If not, what error message do you have?

  Click Start > run, and then type the following in the "Open" box and click OK
  %SystemRoot%\system32\
  Find notepad.exe (or just Notepad if file extensions are not displayed), and then double-click it.  What is going on?

• How to select multiple messages in the messaging application in Windows RT?

  How to select multiple messages in the messaging application in Windows RT?

  For contact:

  1) press the first mail

  (2) then drag the 2nd mail left or right a little bit.

  Repeat 2) for all other mails you want to select. You can use the same way to deselect.

  For the mouse:

  Use the ctrl and shift keys, like the Windows desktop version

  I don't know if there is a way to make the selection of the beach of 'shift' by touch only.

• How to select a part of the message under macOS Sierra?

  In previous versions of Mac OS x, I was able to select a part of the message (text / iMessage) in the Messages application. Now, if I try to do the same, Tapback is enabled. It's really annoying, as I often have to copy the entire message body, paste into an editor and then to do the editing.

  Which should not happen if you simply select the text of the message by double-clicking or click-and - drag. That action works the same way it always has.

  Tapback happen if you press and hold - in other words, if do not quickly move the cursor.

  If you are still unable to work, please review your Trackpad preferences. Maybe change a setting arbitrary will correct what you are experiencing. Check accessibility > mouse and Trackpad in the same way: change a setting to determine if what it fixes.

• I can't delete a game called Float that gives the message waiting. The cross and the oscillation with delete option appear, but it won't when I select Remove. Any ideas please?

  I have a new mini iPad 4. I can't delete a game called Float that gives the message waiting. The cross and the oscillation with delete option appear, but it won't when I select Remove. I don't know how it came to be. Any ideas please? Thank you.

  First try a reset to see if it finishes downloading. Press and hold the home and power buttons until the Apple logo appears. Release the two buttons. Wait until the iPad tour starts on its own.

  Check if you can remove the application. If not go into settings > general > use iCloud and storage > storage > storage management. Wait for the list of apps to open. See if the float is on the list. If it is delete it from there.