retrieve the sshd_config configuration

Similar Questions

• Retrieve the current configuration of RV082 without username or password?

  I just started a job in a factory of critical infrastructure in which the previous person in my position has several things to put up with almost no documentation. Given that this plant is critical infrastructure, I need to be careful in what I have mud around with. At present, the plant has no internet access (it is not necessary for the functioning of the plant) because the gentleman, I replaced a RV082 has implemented and used for VPN tunnel to the network. He is now on disciplinary leave, probably never to return, and we make sure that it cannot gain access to the factory. I don't know if we need to have access to the plant while off site, but just in case we do, is possible to get the Setup running off this device while not knowing the user name and/or password? I really do not wipe out, but I guess I can, if there is no other way.

  Thank you for your time.

  Tim Bennett

  Hi Timothy, unfortunately without username/password the device will have to be reset.

  -Tom
  Please mark replied messages useful

• Failed to retrieve the configuration of database file when installing EBS on 2 nodes

  I try to install EBS 12.1.1 on two different nodes on Redhat Linux 5. After properly installing the database on node1 (ebsdb), I started rapidwiz on node2 (ebsapps) to install the application technology. When I get to the screen where it asks "Do you want to create a new configuration or load a saved?", I chose to load a saved configuration, typied in the database connection information (ebsdb.sparkdb.com:PROD:1521) and get the following error. Anyone know what I am doing wrong? I am able to ssh to ebsdb to ebsapps and vice versa, and the database and listener is in place.
  
  Failed to retrieve the database configuration file.

  user564785 wrote:
  What file must be copied from DB node to the node of Apps and what place?

  conf_.txt - http://docs.oracle.com/cd/E18727_01/doc.121/e12842/T422699g54568.htm

  You can copy the file to any place on the application-level nodes.

  Thank you
  Hussein

• Error running code system. Failed to retrieve the configuration information

  I get this error:
  
  Error running code system. Failed to retrieve the configuration information for the content Terminal item. Unable to load locale 'American English '.
  
  Details:
  
  An error has occurred. The stack trace below shows more information.
  
  ! csSystemCodeExecutionError! csUnableToGetConfigInfoForCheckIn! csLocaleNotFound, English-US
  intradoc.common.ServiceException:! csUnableToGetConfigInfoForCheckIn! csLocaleNotFound, English-US
  at intradoc.server.ServiceRequestImplementor.buildServiceException(ServiceRequestImplementor.java:1760)
  at intradoc.server.Service.buildServiceException(Service.java:1997)
  at intradoc.server.Service.createServiceExceptionEx(Service.java:1991)
  at intradoc.server.Service.createServiceException(Service.java:1986)
  at intradoc.server.ServiceHttpImplementor.determineParameterizedLocale(ServiceHttpImplementor.java:609)
  at intradoc.server.ServiceHttpImplementor.initLocale(ServiceHttpImplementor.java:408)
  at intradoc.server.Service.initLocale(Service.java:333)
  at intradoc.server.Service.initDelegatedObjects(Service.java:201)
  at intradoc.server.ServiceManager.processCommand(ServiceManager.java:358)
  at intradoc.server.IdcServerThread.run(IdcServerThread.java:197)
  
  Anebody has an idea
  
  
  Thank you
  REDA

  Hello

  Add the SystemLocale = American English variable in your config.cfg, restarting the CS and then see if the same problem persists.

  Srinath

• Retrieves the VC objects stored in the configuration item sometimes as "notfound".

  Hello everyone, I'm storing various items of vCenter configuration (warehouses of data, networks, data centers, etc.), some stored as single values and others as a table in a configuration item.  I'm having a strange problem where sometimes the value of the object returns a string "notfound".  All extracted values of several references in the same action/workflow all work (VC returned object) or all the return "notfound".  Other value types no VC (String, number, etc.) are taken from the same configuration without problem.  There is no external event I am aware of which triggers the failures of research.

  The behavior is not entered in the log file, so I may need to raise the level of logging to see what is happening.  All objects belong to a single instance of vCenter and the vCenter service has increased in all series of workflow runtime.  I am running vCO 4.2.1 Windows version with the patch applied KB 2015178 and 5.0 U1 vSphere vCenter/hosts.

  Someone at - he seen this before?

  David Coulter | VCDX #72 | http://www.sovsystems.com | Twitter: @dcoulter_

  Yes, it is a known issues. A new version of the plugin vCenter update be would provide around mid-June. You can open a Support request if you want to get the version earlier.

  Thank you.

• Try to download the latest Firefox on Windows 7 laptop, but the Firefox configuration page says he is the download for an hour now and shows no signs of finishing.

  My laptop is protected with the free AVG AntiVirus package. The Windows Firewall is enabled.

  No need to go to ftp to retrieve the configuration complete when there is https://www.mozilla.org/firefox/all/

  To find this link, go to mozilla.org -> green box and systems & languages below the download link.

• Unable to retrieve the price of digital goods

  I use this code to retrieve the price for an item

  paymentservice_get_price (NULL, ITEM_SKU, getWindowGroupId(), & request_id);

  I get an error saying

  This app is not allowed to access the items you're looking for

  What could be any issues that caused this to happen?

  Previously I was testing this on the local mode but I realized any SKU I went to, it will only return me with a single price for all SKUS (although each of them should have different prices)

  So currently I'm testing it on end of maximum production mode, I get an error.

  I would like to ask what is the right now to recover all of my items to price?

  PS: I develop in native code (C++)

  You need to test while the production of your sandbox mode, to do this download the .bar to Blackberry world and then you can download on your device through the section developers from the world Blackberry in an hour or 2 after configure it app world.

  You will need to assign your e-mail bbid to the application sandbox, leave no space behind her obvious then that the implementation because it does not recognize the email.

• Dell v715w - cannot retrieve the application list from your computer

  I have a new desktop WIN7 64 bit Voastro (replaced a dimension on XP) I can't use the printer control panel to scan.  I get is unable to retrieve the list of applications on your computer on the screen of the printer.

  Have reinstalled the printer at least 3 times now with different downloaded drivers from the original printer disk

  I've seen a lot of posts on here for similar problems, but none seems to have a definitive solutiuon for this problem.

  Any help much appreciated!

  Thank you - sdgconc

  Hello

  Thanks for the reply.

  Please disable the firewall on the computer and check if the printer works fine.

  If parsing is successful after you turn off the firewall, please add printer Dell as an exception to the firewall.

  If the search was unsuccessful, please follow the steps below:

  Click Start > Control Panel > devices and printer > printer right click and select Properties.

  

  Select the Ports tab in the printer properties window, and then configure the Port.

  Printer IP appears in the Port configuration window.

  

  Enter the printer's IP address in the browser to log on to the website of the printer.
   
  Click on Configuration and management of home network analysis.

  Then click on start > all programs > Dell printers > the home printer settings tab > network computer name.

  

  

  Remove the scan to PC host.

  

  Please let me know if you use printer wireless or USB cable.

  In case you use wireless printer, try it please I scan a document with the printer connected via USB cable.

  Thank you & best regards
  Mustapha S
  #iworkfordell

• How to retrieve the RADIUS shared secret key on the WLC 5508

  Hi all

  The wirelss privious admin left our company and did not let the other know the shared secret key on the WLC 5508 Radius.

  The 5508 WLC runs on the 7.0.98.0 code. I can access the viao WLC CLI and GUI. I can also access the Win2003 Radius Server, but the button displays an asterisk for me. I have listed partial RADIUS config of the WLC below. How can I get the RADIUS shared secret key? Thanks in advance.

  (Cisco Controller) > show RADIUS summary

  Vendor Id backward compatibility... People with disabilities
  Call Station Id... lower case
  Dial the Station Id Type... IP address
  Aggressive failover... Activated
  Keywrap.......................................... People with disabilities
  Rescue test:
  Test Mode.................................... Off
  Probe of username... cisco-probe
  Interval (in seconds)... 300
  MAC for authentication Messages... hyphen delimiter
  MAC for Accounting Messages... hyphen delimiter

  Authentication servers

  The State of the Port Address Type server all RFC3576 IPSec - AuthMode idx / phase 1/group/life/Auth/BA
  ---  ----  ----------------  ------  --------  ----  -------  ------------------------------------------------
  1 NM 10.xx.18.48 1645 on 2 off off - no/unknown/group-0/0 None/None

  Accounting servers

  The State of the Port Address Type server all RFC3576 IPSec - AuthMode idx / phase 1/group/life/Auth/BA

  -Other - or ITU (q)
  ---  ----  ----------------  ------  --------  ----  -------  ------------------------------------------------
  1 N 10.xx.18.48 1646 enabled 2 N/A disabled - no/unknown/group-0/0 None/None

  Kind regards

  Robert

  You can retrieve the RADIUS shared secret key as other passwords that are stored on the WLC by using the procedure at the following link:

  https://supportforums.Cisco.com/community/NetPro/wireless-mobility/begin-wireless/blog/2011/11/04/recover-wepadminguest-account-password-from-WLC

  NOTE: WPA keys are not available through these methods.

  Basically, you can enable password in clear text on the wlc with 'config passwd-cleartext enable' and then issue a "view orders of the running-config' - your RADIUS configuration command should now display the shared secret.

  -Pat

• Unable to retrieve the password on PIX 501 - TFTP failed (return: arg:0 x 0-1)

  In the course of a merger of office, we got a PIX 501. It is obviously been configured but nobody is anywhere knows anything and there is no documentation regarding the config not found. As a result, I tried to retrieve the password so that we can reconfigure and reuse it for our purposes. I followed the instructions on the cisco.com web site but get the error message:

  TFTP failed (return: arg:0 x 0-1)

  I tested the connectivity between the PIX and TFTP server and it works. I can post a txt file that is captured is of no help.

  Any ideas as to what I am doing wrong or, more importantly, how the address so that I can recover the password. Certainly, it is the first time that I have worked on a PIX.

  Thanks in advance for any help.

  Sergio

  Sergio,

  Depends on when you received the pix. I'll try with the code 6.1 and 6.2. Thank you

  Renault

• [ADF, JDev12.1.3] SelectOneChoiche created from VO instance with 3 fields: how to retrieve the value of all the fields of the selected element?

  Hallo,

  I defined a VO with 3 fields (A, B and C) and I would like to create a SelectOneChoiche that shows only the field as options from this instance of VO.

  In a managed bean, I need to retrieve the values for all areas (A, B and C) of the item selected by the user.

  I started dragging the entire VO instance to UI to create a SelectOneChoiche (in which I have chosen to show only the to field).

  Then, I created a for the SOC ValueChangeListener read the values A, B and C of the selected element, but the only thing I've done is to get the displayed value:

  System.out.println((String) ((RichSelectOneChoice) FacesUtils.findComponent("MySoc")).getValue());
  

  You kindly help me?

  Thank you

  Federico

  Federico, sorry I didn't see your answer.

  As you use 12.1.3 you can do this more easily than the code that I posted before. You can use

  {} public void onCountrySelection (ValueChangeEvent valueChangeEvent)

  FacesContext will involve = FacesContext.getCurrentInstance ();

  Make sure that the selection change is processed and the current link lov line has the new selected line

  valueChangeEvent.getComponent () .processUpdates (contxt);

  BindingContext lBindingContext = BindingContext.getCurrent ();

  BindingContainer lBindingContainer = lBindingContext.getCurrentBindingsEntry ();

  List JUCtrlListBinding = lBindingContainer.get ("CountryId") (JUCtrlListBinding);

  the newindex in not necessary, but ok let's get it (must be equal to the CountryId, the pharmacokinetics of the binding of the lov

  String newindex = (String) valueChangeEvent.getNewValue ();

  get the selected value in the list that is the selected line of the binding of the lov

  Line lFromList = list.getSelectedValue () (line);

  now, we can get the attributes of the line of lov

  String s = (String) lFromList.getAttribute ("CountryId");

  System.out.println ("CountryId:" + s);

  String s2 = (String) lFromList.getAttribute ("CountryName");

  System.out.println ("CountryName:" + s2);

  BigDecimal s3 = lFromList.getAttribute("RegionId") (BigDecimal);

  System.out.println ("RegionId:" + s3.toString ());

  }

  The form that I use is based on the location of the HR DB schema table. The CountryId is configured in the view object to display a lov based on the campagneVoir. This view contains thre CountryId, CountryName and RegionId attributes.

  If you want to get to the attributes of an action listener you can use this code

  {} public void onGetSelectedCountryLov (ActionEvent actionEvent)

  BindingContext lBindingContext = BindingContext.getCurrent ();

  BindingContainer lBindingContainer = lBindingContext.getCurrentBindingsEntry ();

  List JUCtrlListBinding = lBindingContainer.get ("CountryId") (JUCtrlListBinding);

  get the selected value in the list that is the selected line of the binding of the lov

  Line lFromList = list.getSelectedValue () (line);

  now, we can get the attributes of the line of lov

  String s = (String) lFromList.getAttribute ("CountryId");

  System.out.println ("CountryId:" + s);

  String s2 = (String) lFromList.getAttribute ("CountryName");

  System.out.println ("CountryName:" + s2);

  BigDecimal s3 = lFromList.getAttribute("RegionId") (BigDecimal);

  System.out.println ("RegionId:" + s3.toString ());

  }

  You must add the valueChangeListener and at least add the lines

  FacesContext will involve = FacesContext.getCurrentInstance ();

  Make sure that the selection change is processed and the current link lov line has the new selected line

  valueChangeEvent.getComponent () .processUpdates (contxt);

  to ensure that the selected line is available when you click the button.

  And set autosubmit'= true for the field in the UI that displays the LOV.

  Timo

• Failed to retrieve the site definition for the ATG 11.1 site id

  Hello

  I'm trying to access a page /browse created under the site of siteStoreUs in the experience Manager. If I try to access the page of the application, observe the error with the blank page below.

  We work with ATG 11.1

  Please help me to solve this error.

  18:08:32, 401 SEVERE [atg.endeca.assembler.multisite.ExtendedSiteManager] (http-/0.0.0.0:8080-6) unable to retrieve the site for the site id of the site definition: /siteStoreUS: com.endeca.store.exceptions.

  PathNotFoundException: No node found at path: [pages].

  at com.endeca.store.configuration.InternalNode.getNode(InternalNode.java:153) [_DAF. [Endeca.Assembler_slib_sendeca__assembler__core - 11.1.0.jar:11.1.0]

  at com.endeca.store.configuration.InternalNode.getNodeInfo(InternalNode.java:221) [_DAF. [Endeca.Assembler_slib_sendeca__assembler__core - 11.1.0.jar:11.1.0]

  Thanks in advance,

  Ravinder Pogulakonda

  The resolution is here;

  Set storeFactory = / atg/short/assembler/cartridge/manager/DefaultFileStoreFactory in /atg/endeca/assembler/cartridge/manager/DefaultWorkbenchContentSource.properties

  Make sure of course below are configured correctly

  -Site of short Id to the element of site must correspond with the name of the site in the Manager(Ex: If the site name in XM is "homeSite", then Endeca site id in the site item should be "/homeSite") experience

  -Set configurationPath=C:/Endeca/ToolsAndFrameworks/11.1.0/server/workspace/state/repository/ /atg/endeca/assembler/cartridge/manager/DefaultFileStoreFactory.properties

  -Create the user segment in XM to /homeSite as site.homeSite.

  I hope this helps

  Thank you

  Ravinder

• Hello. I need help developing a PowerCli script that will show me the current configuration of the video Ram of each individual virtual machine on a host\cluster or a vcenter. Can you help me?

  I have a script that will allow me to change the configurations of VRAM, but I need a script that retrieves the configuration of all virtual machines VRAM in my infrastructure.
  I need to get out information to a csv file and run this report on a monthly basis... can you help me?

  Right now my environment is mixed. I have Windows XP virtual machines set to 4 MB, Windows 7 virtual computers set to 8 MB and a subset of sall of virtual machines set to automatic detection of settings.

  I need to be able to recover these settings in a CSV file in order to use this information for comparisons of trdouble-shot performance issues...

  Thank you.

  

  Try something like this

  Get - VM |

  Select Name,

  @{N = "OS"; E={$_. ExtensionData.Config.GuestFullName}},

  @{N = "VideoRamMB"; E = {}

  [math]: Round (($_.)) ExtensionData.Config.Hardware.Device |

  where {$_-is [VMware.Vim.VirtualMachineVideoCard]} |

  (Select VideoRamSizeInKB - ExpandProperty) / 1 Ko, 1).

  }} |

  Export-Csv vm - videoram.csv - NoTypeInformation - UseCulture

• Error occurred in retrieving the provided user bindDN.The user must have attribute/s firstName, lastName, email BindDN.

  When I go through the wizard and setting to the top of my base and bind DN, I get the following error. What Miss me? Error saving configuration of the directory. Error occurred in retrieving the provided user bindDN.The user must have attribute/s firstName, lastName, email BindDN.

  The usename you use AD administrator (IE CN = admin) must have the required attributes with non-empty values - firstName, lastName, email.

  When HW connect to AD with bindDN he added that makes the system user who applies the required properties.

  These properties are required for each user that needs to be added/synchronized to the workspace of horizon.

  To correct this error, you must go to AD and adds these admin user attributes.

• Unable to connect through wireless F4580: "unable to retrieve the IP.

  Hello

  I live in France, where the F4580 and trying to connect wireless.  The printer works fine when connected via USB, but I can't make it work wireless, HP installation wizard gives me:

  IP address: impossible to retrieve the IP

  Subnet mask: Impossible to retrieve the IP

  Default gateway: failed to retrieve the IP

  Preferred DNS server: unable to retrieve the IP

  Auxiliary DNS server: unable to retrieve the IP

  I use a MacBook Pro with Snow Leopard on an ISP Internet Orange Livebox. I saw some issues autour, but none exactly what I have with the same configuration.

  Filtering of Mac addresses: a possibility, but other laptops are able to connect to this wireless with key security without problem. similar here: http://h30434.www3.hp.com/t5/Printer-networking-and-wireless/Wireless-set-up-HP-F4580-vs-Orange-Live... but also seems to be PC

  Orange Livebox problem: question mentioned here: http://livebox.tomhallam.co.uk/tutorials/how-to-install-a-printer-to-your-livebox-liveprinter.html but that seems to be for a PC

  Question in Snow Leopard: is not compatible software for SL? I see this: http://h30434.www3.hp.com/t5/Printer-networking-and-wireless/C4780-Snow-Leopard-Airport/m-p/174198/h... but that's a different printer model

  Issues related to the:

  How to find the IP address of my printer?

  How to find the MAC address of my printer?

  How can I print my network Config page?

  Of the ideas there?  Any help is very appreciated.

  Many routers-wireless Orange Livebox require that press you a button to add a new device to the network.  The button is probably located at the back of the router.

  I think we should start over.  Try the installation process of the printer F4580 using the driver from www.hp.com located here.  Once it scans and detects the printer, press the Connect button on the back of the Livebox wireless router.