Retro pay according to the status of evidence for clone. Erroneous for employees.

Similar Questions

• How can I check the status of activation for CS4

  I would like to check the status of activation for CS4, S/N < mod redacted >

  Click Help and, if enable is dimmed and disable is clickable, your program is currently active.  If disable is dimmed and to activate is clickable, your program is currently disabled.

• How to check the status of battery for Cyber-shot?

  How to check the status of battery for Cyber-shot?

  Depends on what Cyber-shot you have - in General, there should be a DISP button, or menu on site that display. The State of the battery is usually at the top right.

  The DISP button is usually the UP button.

  In addition, depending on the type of use of the Cyber-shot battery, it can never just to display the bars, or it can show a percentage.

• I have encrypted files on my backup drive. Install the user on the status of CA for access? How?

  How should I keep my new user well that store the same name and all that stuff? If I can access encrypted files?

  If you do not back up your certificate, then you must connect to your machine using the original profile/user who created the encrypted files.  Then, you should back up your encryption certificate.  Then, log in as a new user and import that certificate into the backup that you created.  It is covered in the following Microsoft KB article.  Pay attention to the paragraphs "Why you should back up your certificates" and "how to back up your certificates.  If you cannot connect as the creator of the encrypted files and/or do not have a backup of the certificate, probably you have lost access to these files permanently.

  "Best practices for EFS file system.
    <>http://support.Microsoft.com/kb/223316 >

  HTH,
  JW

• can the status of service for network monitor or run tnsping?

  Hello
  
  I do not see any out-of-box metric to perform database services tnsping, I have obligation to execute tnsping and check the status of the services database for the two cars and dbs stand alone to ensure that services are available and accessible. is there an out parameter of the box for this?
  
  Thank you

  The response metric is enabled out-of-box for the databases of discoveries.

  For 12 c: see Oracle Enterprise Manager Oracle Database and the database-based metric reference: 5.56 response Metrics

  http://docs.Oracle.com/CD/E24628_01/EM.121/e25160.PDF

• Windows Easy Transfer transfers the status of activation for programs like Outlook?

  I have an active version of Outlook 2010 is installed and the new laptop does not. Can I transfer it without having to purchase a new license? Of course, I don't know where I left the CD and the necessary key to re - activate.

  The WET tool does not transfer programs, the only data & settings.

  You need the installation media to install a program.

  Belarc Advisor or MagicJellyBean can reveal the key on a PC equipped with Office or Office installed work component.

  You have purchased a commercial version of Microsoft Outlook provided and recovered the key as per above, download from here and this time save the file installation and the key to external media

  http://Office.Microsoft.com/en-us/products/Microsoft-Office-2010-backup-FX101853122.aspx

• How to get the status of data for each virtual [identify overprovisioning] computer store?

  Hi people,

  Could help me is it you please in the generation of report of VM and its data store location (data stocker store free space, size set up and operation). ?

  Ideally, it should be like this:

  The virtual computer name. Name of the data store. Size of the data store. Total configured data store size

  Thank you

  The following script adds the ProvisionedSpaceGB property to the output of the script of Luke:

  Get-VM | ForEach-Object {
    if ($_)
    {
      $vm = $_
      $vm | Get-Datastore | ForEach-Object {
        if ($_)
        {
          $Datastore = $_
          "" | Select-Object -Property @{N="VM name";E={$vm.Name}},
          @{N="ProvisionedSpaceGB";E={$vm.ProvisionedSpaceGB}},
          @{N="Datastore Name";E={$Datastore.Name}},
          @{N="Datastore Size (GB)";E={[Math]::Round($Datastore.CapacityMB/1KB,0)}},
          @{N="Datastore Total Provisioned size (GB)";E={[Math]::Round(($Datastore.CapacityMB-$Datastore.FreeSpaceMB)/1KB+$Datastore.ExtensionData.Summary.Uncommitted/1GB,0)}},
          @{N="Datastore Used Space (GB)";E={[Math]::Round(($Datastore.CapacityMB-$Datastore.FreeSpaceMB)/1KB,0)}}
        }
      }
    }
  }
  

• Nvy HP 4500: check the status of printing etc.

  How can I check the status of print, for example what are print jobs in the queue?

  Thanks for letting me know who helped @hbf1842.

  Have a wonderful day!

  Think about scoring the Message post that solved the problem like "Accept as Solution" so that someone else in the community of HP who can meet the same or similar problem will know what to do.

  Thank you.

• Add or change the status of subject?

  Hello

  I am fairly new to this community and may also not yet that familiar with RoboHelp 9, I used recently. I have notices that there is the possibility of changing the status of subject for example on loan for the examination etc. in RoboHelp.

  We work in a small team of 3, often on the same project using RoboSource. I would use the status of subject in order to follow if the author or the translator has completed all its work to ensure that follow-up author is aware that he can basically start with its tasks. I know there is the to do list, but I did not find as tools of reporting practices on the status of subject.

  My question is now, is there an option to increase the status of additional subject or any chance to add the to-do List example to the pod list items as column title? Perhaps there is a more practical way to achieve the same result.

  Thanks for your help!

  Kind regards

  Christian

  Welcome to our community

  See if the video below helps you sort.

  Click here to see

  See you soon... Rick

  Useful and practical links Wish to RoboHelp form/Bug report form Begin to learn RoboHelp HTML 7, 8 or 9 in the day! Adobe Certified RoboHelp HTML Training SorcerStone blog RoboHelp EBooks

• Confusion in the Docs of Oracle for oracle 11G Release 2

  According to the Oracle Docs Library for Oracle 11 g Release 2 (11.2), in http://docs.oracle.com/cd/E11882_01/server.112/e25494/tspaces005.htm#ADMIN11375, "* when you specify NORMAL in offline mode, the database takes a control point for all data storage files, since need them offline." I tested it in my Studio to Test as shown below:--
  < > > > > > >
  
  SQL > select checkpoint_change # database v$.
  
  CHECKPOINT_CHANGE #.
  ------------------
  12915076
  
  SQL > ALTER TABLESPACE TEST_1 normal offline;
  
  SQL > select checkpoint_change # database v$.
  
  CHECKPOINT_CHANGE #.
  ------------------
  12915076
  SQL > alter tablespace TEST_1 online;
  
  Tablespace altered.
  
  
  SQL > select State from dba_tablespaces where nom_tablespace = 'TEST_1 ';
  
  STATUS
  ---------
  ONLINE
  
  SQL > select checkpoint_change # database v$.
  
  CHECKPOINT_CHANGE #.
  ------------------
  12915076
  
  
  In short, I took the 'TEST_1' tablespace offline normal mode and back again online, but the number unchanged checkpoint remains that violates the Oracle documentation. Posted below in my versions of Oracle database installed: -.
  
  SQL > select * from v version $;
  
  BANNER
  --------------------------------------------------------------------------------
  Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - Production
  PL/SQL Release 11.2.0.2.0 - Production
  CORE Production 11.2.0.2.0
  AMT for Linux: Version 11.2.0.2.0 - Production
  NLSRTL Version 11.2.0.2.0 - Production
  
  
  Any comments / entries from anyone here is going to be great!
  
  Published by: 918868 on July 27, 2012 03:22

  When a data file/tablespace is offline, begin to put in backup mode, only playback mode.

  Aman...

• Excite the situation of update for the AT10LE - A-&gt; Pro

  Hello

  I was wondering about the status of update for the Toshiba excited Pro.

  _Specifically: _

  -It's going to be an Android 4.3 or 4.4 update? After all, it's a tablet of the premium segment, and I expect the usual level of support. Another manufacturer usually release one or two updates.

  -is yet to come miracast? He promised during the liberation, but then he got the silent about it.

  -the problem of thermal regulation has finally been resolved? Again, this is not rocket science, other manufacturers seem to be able to produce pills that work without overheating.

  -It will never be a way to root it or unlock the bootloader?

  I'm sorry if this seems critical, but given the reviews I had read, I think that these issues are very relevant.

  Updates for both devices excite Pro 3 G and WiFi were released last week.

  Excite Pro AT10LE - A WiFi-> update V4.3.001120220.05
  Excite Pro 3G AT10LE - A-> update V4.3.201121220.35

• CD in the status bar is not recognized - why?

  Hello

  Sometimes, my Mac Pro won't recognize a CD loading.   It is very intermittent.  When this happens, the drive icon does not appear on the desktop and the status bar does not eject with any normal methods.   In addition to the CD does not appear in the disk utility, and frequently disk utility does not open.

  Based on other posts, this seems to be an unusual problem.  I've seen a lot of posts on how to get the tray open.

  What I've not seen, that is WHY this problem occurs and that will set to put in place to prevent it from happening again.

  Any help in identifying a cure is greatly appreciated.

  Don't know... all I can do is to suggest a few things and hope that works... Try first, is a cleaning disc with brushes integrated in the drive or a good breath of air. If you have a Mac Pro Tower, you can remove the optical drive and open it, the laser inside lens may be dirty, if it does not, a Q-Tip and windex could. I don't know how old is your drive, but if it is one of the original Optiarc ones, they do and can go wrong sometimes, but are easy to replace. According to the age/model of your Mac pro, you can use virtually any SATA optical drive or a SATA optical drive with an ATAPI/IDE bridge Board connected to the rear. Make sure the jumpers on the back (if there are any) are set to CSEL, expected your drive must be replaced, too, zap the pram (well, it's worth a try, anyway) I... .is the commercial cd or it is home made?

  Let us know how that turns out

  Good luck

  John B

• SMC is a hardware or software problem according to the warranty?

  Hello!

  Two months ago I bought a Mac book air (11 '') and now has problems. I give it to technical support and they tell me that they made a reset for SCM (System Management Controller). SMC is a software or hardware problem? According to the guarantee, do I have to pay something? Thank you!

  The management system (SCM) controller is on your card mother Mac Book Air. Thus, it is considered a hardware component and falls under your initial 12 months, new Mac and 3 years warranty if you have Apple Care protection.

  It can be reset with measures as simple as documented by Apple in this articleand external. Yes, you can do it yourself now.

  If someone dares to charge you to reset your SMC, then you look a thief seeking to you charge for a 1 minute plan.

• What is the status of your order?

  Ordered my pure Moto X yesterday, about an hour after that pre-orders have started. Today, I went into my email and checked the status of my order. According to the bike order status tracking site, my bike was done and my 'order is finished. If this is true, I guess to be shipped quickly.

  Excellent work, Motorola.

  Hate to be depressing, but your best advice is the shipping date that you were provided when you placed your order.

• According to the set printer wizard, my new printer software has been installed, but the printer will not appear on the section 'printers and faxes '.

  You have a printer again, with installation CD. According to the set printer wizard, my new printer software has been installed, but the printer will not appear on the "printers and faxes" section in Control Panel. Model of printer - Epson XP-200.  Have a Dell, Windows XP.  Help!  Not even sure who to ask...

  What version of XP (Home, Pro, Media Center) and service pack (none, 1, 2, 3)?

  Printers and faxes is totally blank?

  Open a command prompt window (start > run > cmd > OK)
  Type the following in the black command prompt window and press enter
  spooler request SC

  You should see something like this:
  Service_Name: Spooler
  TYPE: 110 WIN32_OWN_PROCESS (interactive)
  STATE: 4 RUNNING
  (STOPPABLE, NOT_PAUSABLE, IGNORES_SHUTDOWN
  WIN32_EXIT_CODE: 0 (0X0)
  SERVICE_EXIT_CODE: 0 (0X0)
  CHECKPOINT: 0X0
  WAIT_HINT: 0X0

  What is the 'State' displayed for you?

  Open the Services applet (start > run > services.msc > OK) and scroll down to "print spooler".  The status should be started and the Startup Type should be automatic.  What are the parameters of your correspondents?  If your print spooler is stopped, you can try to launch it by clicking on the link, but I suspect that it stops again.  Please report the results of your efforts.