SMC is a hardware or software problem according to the warranty?

Similar Questions

• Error: "corrupted error reports are rare. They can be caused by hardware or software problems and usually indicate a serious problem with your computer. »

  Original title: my computer was "rebuilt" with all the new parts June 2011. Logging on his shot and miss it may stay on or shut down and restart. I have this message when I turned on my pc this afternoon:

  Corrupted error report.

  Unfortunately, the error you report submitted is corrupted and cannot be analyzed. Reports "damaged errors are rare. They can be caused by hardware or software problems and usually indicate a serious problem with your computer.

  When I turned on pc today is showed a blue screen and can something on a disc because the disc did not work properly?

  I paid for all the new parts for my computer and the computer technician has assured me that all the work was completed and correct. I bought the power supply (1) mother board, cards (2) 1 TB of memory. (2) hard drives 1 TB. (1) card reader and other elements appearing on my Computer Geek Bill.

  My music files are no longer mp3 but .oma. He/the Tech added its own files and records of music of World War II. These game. The drive D drive or slave who held my music, he said he wiped clean.

  I need to know these error reports will completely close my pc and all the information will be lost?

  Hi satindoll11233,
   
  I recommend you to disable the auto reboot system error (this option prevents Windows to reboot automatically if a Windows error to fail) of the startup options safe mode to know the exact error message or error code originally this problem.
   
  For more information, see:

  A description of the options to start in Windows XP Mode

• I tried to reload XP using my drive but it failed due to a hardware or software problem, XP is stuck in a loop and does not load. How can I clean my disks and reload XP?

  I have a HP XP of 2005. After a year of use of a premium support tech, my OS must be installed.

  I used the disk and followed the installation steps. I received a message on there was a hardware or software that would effect the install and may not work properly. In any case, I continued and of course I am stuck in a loop.

  I can't go to my office.

  First of all, I get a notice on a black screen to select the operating system to start. There are 2 identical choices. Microsoft Media edition.

  Once selected, a screen appears. "We apologize for the inconvenience, but Windows did not start successfully.
  a recent hardware or software change might have caused this. "

  I have enough to make choices and none work.

  1. choose the last known good configuration to return to the most recent settings that worked. :

  2. do not apply

  3. There is a selection in the Safe Mode with command prompt and if I had used the F8 key to reinstall this option would have worked. To do this, do not hurry.

  what I get is a list of drivers that are installed.

  I'M IN A LOOP BETWEEN CHOOSE TO START WINDOWS WITH MICROSOFT XP THEN A NEW SCREEN APPEARS, WHATEVER I HAVE THAT LISTS THE CHOICES ABOVE.

  I need help reload my OS and wipe the hard drive clean. Is there a software I can download to help?

  Hi btbtms,

  You can follow this link to find out how to install Windows XP on your computer.

  How to install or upgrade to Windows XP

• In XP, error at startup 'Windows couldn't start. A recent hardware or software change might be the cause.

  Windows could not start. A recent hardware or software change might be the cause. To solve the problem:

  1. Insert your Windows installation disc and restart your computer.

  2. choose your language settings and thenk click 'next '.
  3. click on "repair your computer".

  If you do not have the disk, contact your system administrator or computer manufacturer for assistance.

  File: \Windows\system32\winload.exe

  State 0 xC0000001
  Info: The selected entry could not be loaded because the application is missing or damaged.

  But, instead of file: \Windows\system32\winload.exe I get file: \$Windows.~BT\windows\system32\winload.exe.
  

  Hi imranhussain1979,

  ·         You have made any changes recently?

  ·         When it was working fine?

  ·         You have Windows XP or a later version of Windows?

  Step 1: The error seems to refer to a later version of Windows. Restart the computer and check if the installed operating system.

  Step 2: Try to start the computer in safe mode and check the number.

  Start your computer in safe mode

  Microsoft Windows XP: start the computer in safe mode

   

  Respond with more information so we can help you best.

• Windows could not start. A recent hardware or software change might be the cause.

  I have a Toshiba M300 and it fails to start. Here's what he said.

  Windows could not start. A recent hardware or software change might be the cause.

  If the files in the window were damaged or configured incorectly, startup rapir can help diagnose and fix the problem. If the power was interrupted during startup, choose start windows normally.

  Lanch Startup Repair

  Start window normally

  Well, I had two options... and nothing works. It gets stuck just on loading thingy, where it says MICROSOFT WINDOWS and keeps loading... I leave for 2 days and he continued make it... and it also won't let me restore my computer...!

  PLEASE HELP :(

  Hi Suzanna2001,

  Were present from recent changes to the system before the show, such as adding new hardware or software (including Windows Update).  You have access to a Windows CD/DVD?  Run the startup from the CD/DVD repair.  There is also an option to perform a restore of the system on the CD/DVD.  If no option is the problem, follow the steps below:

  1 1 demarrer start from the Windows 7 DVD, select your language and keyboard options, select repair your computer, and then select command line.

  2. from the command prompt, run the following command:
  DISM image:c:------/ Get-Packages

  This will produce a list of updates installed and packets.  They will look like this:

  The package identity: Package_for_KB978262 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.1.1.0
  Status: installed
  Output type: security update
  Install time: 02-11-2010 13:01

  3. find the most recent and then make a note of the identity of the package.

  4 run:

  DISM image:c:------/ Remove-Package /PackageName:Package_for_KB978262~31bf3856ad364e35~x86~~6.1.1.0 (name of the update from the previous step)

  Until it is complete, you will get a status of the collection.

  5. restart your PC.

  You want to start with the most recent, and then remove them one at a time to find the problem update Dena
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• The following error during the installation of Windows: "cannot start Windows. A recent hardware or software change might be the cause.

  Help, please! Installing Windows Interrupted!

  Hi recently my computer was giving me a bit of concern for example (running slow, do not easily light etc...). A couple of days, my computer has decided not to put on after a glance on the net (on my other computer), I found I had a problem call KSoD or black screen of death, therefore I went on youtube and made all the different things said youtubers can fix this how ever none of these things worked, so finally I decided that I would have factory reset my computer/windows to using the system restore. However, at half way through the installation of windows after the factory reset (my computer came with no disk Windows), my computer has decided to remove what I believe to be called a blue screen of death, that this happened before and I thought it was part of the installation but when I turned my computer on he showed at the bios screen , but then it said 'unable to start Windows. A recent hardware or software change might be the cause. To solve the problem: 1. Insert your windows installation disc and restart your computer. 2. choose your language settings, and then click Next. "3 click on repair your computer ' all this is very well apart from the fact that I do not have the windows installation disc. I'm stuck at this screeni however have a disc of windows 7 and that he was going to install windows7 after I got my vista Setup! but the only I see is the bio screen so I was wondering if there was some way I could install windows 7 from the bios or simply delete the entire half installed this error files windows vista from the bios screen? Please, any help is greatly appreciated. Or get a new internal HDD would fix the problem aswell?

  Hello

  You can check out the following link and check:

  Installation and reinstallation of Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

  See also, how to start your computer from a Windows 7 installation disc or USB flash drive.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-from-a-Windows-7-installation-disc-or-USB-flash-drive

  Note:

  If the copy of Windows 7 is an upgrade, you will need to install a full version of Windows Vista and then upgrade to Windows 7

  I hope this helps!

• When you try to run a system recovery I get this error: cannot start Windows. A recent hardware or software change might be the cause. OxcOOOOOOf

  When you try to run a system recovery I get this error; OxcOOOOOOf

  Original title: error OxcOOOOOOf

  My laptop crashed. I used my initial recovery to start. I get a message from Windows Boot Manager as follows:

  Windows could not start. A recent hardware or software change might be the cause. To solve the problem:

  1. Insert Windows installation disc and restart your computer.
  2. choose your language settings, and then click "next".
  3. click on "Repair your computer."

  If you do not have this disc, contact you system administrator or computer manufacturer for assistance.

  File: \Windows\system32\winload.exe

  Status: OxcOOOOOOf

  Info: Seelected entry could not be loaded because the application is missing or damaged.

  It does not work. Suggestions and no, I have not modified before the crash.

  I loaded my recovery disk for my 32-bit home edition of vista Hp pavilion dv6700 cto entertainment lapt top and after going through the recovery process I just get this mechioned of the screen in the original question. How ever during my recovery process never got far enough to enter my product code, he asked just a two disc and disc supplamentry and then gave me a blue screen black for a minute or two then rebooted and showed the failure of start OxcOOOOOOf screen... what should I do?

  Hi Anthony206,

  Since you've already tried to use the Windows Vista recovery disc has received from the Original Equipment Manufacturer (OEM).

  From now on, you can only contact OEM for the use of the recovery feature.

  I hope this helps.

• Widows could not start. A recent hardware or software change might be the case. Pre-installed vista so NO CD.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: widows could not start.  A recent hardware or software change might be the case.  Pre-installed vista so NO CD.  SAFE MODE AND ALL THE OPTIONS (LAST KNOWN CONFIGURATION, SAFE MODE WITH COMMAND PROMPT, ETC.) ALL DO NOT WORK.  Help, please

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  You can't have a cd, but the PC manufacturer if they did not provide recovery disc, there is a hidden restore partition which should be accessed to make recovery disks.

  There the diagnostic utilities provided by the manufacturer of the PC that you can access from the start screen to test your hardware? Access your site from PC manufacturers for help on how to access these if avilable

• HP G60 laptop OEM Vista h. Prem startup failed to start Windows. A recent hardware or software change might be the Cause. ... Running in a State of Limited Diagnostic... »

  I have a 4 years old HP G60-235DX computer laptop Vista Home Premium OEM factory installed.  I had been doing the blue screen of death the last 8 months.  On Tuesday afternoon, I ran ChkDsk.  It was taking too long so I hit the power button.  now on startup, a message indicates "Windows Failed To Start."  A recent hardware or software change might be the Cause. "I tried to restore it to 4pmPST (Tuesday 7/2), but he sent the message:"your computer is running In A Limited Diagnostic State.  If you use the system restore in this Limited State, you can't undo the restore operation. "Expert Microsoft at the reception of the answer took me by (attempt), safe mode safe mode with network (failed attempt), last known good configuration (failed attempt).   He said that he needs me to order a HP recovery disk because the Vista system files are corrupted, damaged or missing.   Does this sound correct?  Try to get a good HP # order JUST a recovery disk.   I was the victim of the "have you tried to fix your own computer without HP offers you a recovery disk?   This is what happens when you try to fix it yourself without HP offers you a recovery disk. »

  Thank you.
  Skynet

  Your CV has been provided with a score of hidden restore and HP provided instructions on how to create the recovery disks

  http://h10025.www1.HP.com/ewfrf/wc/document?CC=UK&LC=en&DLC=en&docName=c00809678

  If you know the brand of the hard disk on the system, this disc has a free disk bootable verification utility, if you do not know the Player try to WD's SeaTools

  http://www.Seagate.com/GB/en/support/downloads/SeaTools/

• Error on startup: "Windows cannot start. A recent hardware or software change might be the cause.

  Original title: is that what Microsoft offers downloadable boot for Vista drive data

  I have a Windows error recovery when Windows does not start. A recent hardware or software change might be the cause.

   
  Loops in this form BACK to watch as it starts, it then restores to the error recovery screen.
  I need information from the startup disk so that I can read my Dell Inspiron 531 Windows disc and if all goes well the error; Download a Microsoft?

  Hello

  try a system restore of 1st

  If this does not download and use a startup, the ERD etc. neosmart

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

• Windows could not start. A recent hardware or software change might be the cause.__File:\Windows\System32\Drivers\shcsh.sys__Status:0xc0000225

  Whenever I try to boot my system I get the error message

  Windows could not start.  A recent hardware or software change might be the cause.
  File:\Windows\System32\Drivers\shcsh.sys
  Situation: 0xc0000225

  If I try to boot from the DVD of ROM(with Windows Visata) to reinstall the operating system to Windows Vista, it does not.

  Please I need your help

  Have you changed the boot order:

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  See you soon.

  Mick Murphy - Microsoft partner

• Speed problems according to the channel in which I connect - Possible hardware problem:

  Hello

  I bought a R8000 about 1 month, and it worked pretty well. Last week, I read a review on the router suggested what a turn on the Smart Connect. That's when the problems started.

  -Panda USB wireless that worked perfectly started to have speeds of 1.5 Mbps when my service is Comcast 150MBps explosion. Before turning on the S.C., it reaches that speed easily.

  -After the filming of Smart Connect, did not improve the performance of the USB dongle. It is remained at 1.5 Mbps to 3MBPs. I tried to fix it for a week now.

  -J' I reset the modem (button reset button for 10 seconds), configured my router again and added to my dongle is malfunctioning, the router started having trouble to detect my external WD "My passport".

  Today, troubleshooting the wireless dongle with Panda, I changed the channel 5 GHz at the elementary school and the speed is back to 170 Mbps. The router is kept at approximately 3 M from the computer without any obstacles between them.

  Finally, the streaming of my router (with cable) to my TV using DLNA sometimes stutters. yesterday, she even caused the TV to not recognize the transmitted file.

  Can you help me troubleshoot the router more far to find if it is defective?

  Thank you

  As I started the topic, I would give it a closure. My problem was that I had a USB Wireless Dongle of Panda, who performed in the secondary channel (high way) but ridiculously low in the primary (Channel Low). As I had Smart Connect lit, I couldn't control my connected computer channel and appeared the problem was with the router.

  That said, I noticed a better balance between devices when I disabled the dynamic QoS option. I don't know if the algorithm for dynamic QoS is simply wrong or its implementation by the current firmware (V1.0.3.4_1.1.2) is buggy.

  In any case, currently, everything works with me. Explosion of Comcast 150Mbps and rapid tests is between 157 to 153Mbps in tests using a channel 5 G.

• Windows could not start. A recent hardware or software change might be the cause. (vista)

  I've updated pctools free and there was a mistake by because it came when the computer restarts,

  Windows could not start. A recent Ministry of hardware or software may be the cause. To solve the problem.

  1. Insert the windows installation disc and restart your computer.
  2. choose your language settings, and then click "next".
  3. click on "repair your computer".

  File: \windows\system\drivers\PCTCore.sys

  status: 0xc0000098

  Info: windows could not load a critical system driver is missing or corrupt.

  I tried I went to my computers startup options advanced and tried to run in safe mode, but the same previous screen came. Each option in my boot options is the same screen. I realize that to solve this problem, I might have to reload my OS together.  I tried to put what I believe to be the installation disc in and restart but it starts and says the same message. I don't know how to start from the DVD.

  Someone at - it solutions?

  Change the boot order in the BIOS to boot from the CD drive first.
  How to change the boot sequence in the BIOS
  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  C:\windows\system32\drivers\pctcore.sys file information
  http://www.file.NET/process/PCTCore.sys.html

• Hardware or software problem? Freezing of Windows and 1 hard disk failed.

  My Pavilion dv7 freezes at the windows startup screen.  I can't via safe mode.  It starts and hangs at disk.sys.

  I ran a diagnostic and start-up test and hard drive tests showed 1 hard disk had a default ID: PLP773-4SX5SL-XD03GK-60V003.

  As I am able to boot and I have run diagnostic test, I would not have thought that the hard drive was not.  I thought it would be a corruption of software.  Unless the hard drive is failing.

  What do you think? Software or hard drive?

  Don't know whether to order a recovery disc or not.  If it is a hard drive, non-techie can someone order a new hard drive and install?

  Hello

  Well the error 305 definetely would indicate a hard failure.

  The link on the hard drive in the guide below is for the United Kingdom - I guess that it is where you live as suffix to your model number (ea) is the same as mine, but if this isn't the case, the HARD drive (or a very similar) is available almost everywhere.

  Replacing the hard drive.

  The player at the link below is an example of one that would be perfect for your laptop.

  500 GB hard drive for laptop.

  The procedure to replace the hard drive begins on Page 47 of your & Maintenance Guide.

  Once this is done, simply use your recovery DVD to reinstall the operating system on the new drive.

  If you do not have your recovery discs, you can order a replacement set using the link below.

  https://www.best2serve.com/page/rcd_landing?redirect_product_id=21086

  If you have a problem with this link, order them directly from HP.

  If you live in the United Kingdom, contact HP here.

  If you are in another part of the world, begin here.

  Extraction of files from the hard drive.

  The device used by PC World has been a Hard Drive caddy - an example of one of them is here.

  However another possible way to try and recover your files (and does not cost anything) a disc non-boot is to follow the process described in the link below.  The CD of the Ubuntu operating system you create can launched from the CD alone (IE it doesn't have to be installed on the hard drive) and I've often found to successfully extract data from a hard failure.  When you created the CD, follow the instructions and see if you can save your existing files. 

  http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windo...

  Kind regards

  DP - K

• The screen is unresponsive. An orange box keeps appearing on the screen. Hardware or software problems? Solution?

  Tel: Geeksphone peak. Overview of the developers.
  The screen vibrates when they are affected, but no response is received. Orange box, I suppose, a background work any appears on the screen. Any help would be appreciated. Thank you!

  Hi all

  Thanks a lot for taking the time and effort to help me. I'm very grateful for that. The thing that worked for me tried a soft reset by pressing the power button and volume buttons, and then restore to the factory settings. I hope that it works for anyone who might encounter the same problem. Thanks again!

  Dilly.