Return "n" for the box unchecked

Similar Questions

• Ran Malwarebytes & two threats were each one with the same name: PUM. Disabled.SecurityCenter. fact that associated with MSSE PUM & the boxes unchecked in MS security Center.

  Original title: PUM. Disabled.SecurityCenter

  I recently removed "patch system" of my Dell computer XP. Malwarebyte s was the only software to do. MSSE caught, but couldn't fix it. I then updated & ran MSSE on my Toshiba - no threats not found. I then ran Malwarebytes & two threats were each one with the same name: PUM. Disabled.SecurityCenter both at the Date of the registry in HKLM\SOFTE\Microsfot\SecurityCenter\AntiVirusDisableNotify & HKLM\SOFTWARE\Microsfot\securityCenterFirewallDisableNotify.  These two have been listed bad: Good (0) (1).  In the Malwarebytes wesite, I read that this has something to do with MSSE. In a commentary, he says it occurs if, in the MS Security Center, the notification "Notify me if my computer might be at risk because of my virus protection software settings" is unchecked.  I then went ahead & check all 3, firewalls, viruses & automatic updates. My computer seems to work well, except that the fan runs all the time (there are a lot of processes running & the CPU usage is very--often 100%, but the computer works fast).

  My questions are: 1) the PUM associated MSSE & the boxes unchecked in MS security Center; (2) should I click on "ignore" in the Malwarebytes scan? 3) was right to check all the boxes in the center of security - "altert me if my computer may be at rist b/c of my xxx software settings?  Thanks in advance for your help.

  PC fan2

  Hello

  (1) is associated with MSSE PUM & the boxes unchecked in MS security Center;

  The following thread might answer this question: http://forums.malwarebytes.org/index.php?showtopic=69859

  (2) should I click on "ignore" in the Malwarebytes scan?

  Yes

  3) was right to check all the boxes in the center of security - "altert me if my computer may be at rist b/c of my xxx software settings?

  Only, run antivirus software at the same time. Firewall must be performed, evil-ware bytes can be run at your pleasure.

• APEX 4.0.1: $v () function returns multiple values for the box?

  Hello
  
  I have a report that uses apex_item.checkbox (...) to generate the check box. This report correctly displays a check box for each line. The source code that is generated in the html page is:
  < input type = "checkbox" name = "f01" value = "202" id = "P1_CHECKBOX" / >
  ...
  ...
  < input type = "checkbox" name = "f01" value = "220" id = "P1_CHECKBOX" / >
  ...
  ...
  < input type = "checkbox" name = "f01" value = "210" id = "P1_CHECKBOX" / >
  ...
  ...
  
  I want to use the javascript function $v () to get the values of the enabled check box. I thought that the return of this function all the checked values separated by ':' but I noticed that my code alert ($v ('P1_CHECKBOX')); return whenever the value of the first checkbox if it is checked.
  It returns '202' if the first box is checked, but nothing, if only the second checkbox is checked and '202' if the box of the first and the second is checked.

  Hello

  first of all, $v, $x and $s are supposed to not work for items on the page, not the columns in a table or manually generated HTML elements.

  Secondly, I think that your HTML code is not correct, because each of your boxes has the same ID. But the ID must be unique in the DOM of the browser tree. Thus the different box should actually named P1_CHECKBOX_1... P1_CHECKBOX_3. Just look at what is actually generated for a page element real checkbox. BTW, I think that you should not name the checkbox as part of page elements, because they are not actually page elements. I think that this could be confusing for other developers.

  Hope that helps
  Patrick
  -----------
  My Blog: http://www.inside-oracle-apex.com
  APEX 4.0 Plug-Ins: http://apex.oracle.com/plugins
  Twitter: http://www.twitter.com/patrickwolf

• Return policy for the laptop. 2 questions please.

  Hello world!

  I bought some computers laptops and desktops from HP over the years but never had back none of them until my recent order.  I recently placed an order on the laptop but I found a better computer hp laptop at bestbuy, so I called and cancelled the order (only after 15 hours of the order) but HP CS rep would not let me Cancel.  She told me to just leave it delivered and return it once I received the laptop.  HP will pay for return shipping charges and give me a FULL REFUND; which means that they don't give me the refund less shipping fees.  I asked to confirm what she has told me that I will receive my full refund for my order and HP will send me a return shipping label at their cost.  If this is true what she told me, then HP has the best customer service out there.

  My question to anyone who has purchased and returned HP stuff is it is true about what the CS rep tells me?  Moreover, I get free shipping on my order if it makes a difference.  I pray for your opinion on this please.

  Thank you all for your time and happy thanksgiving to all!

  Micca1234

  See the following page HP Shopping "Returns and exchanges" on their return policy / exchange:

  Return exchange

  Exchange & return policy

  Return period

  We encourage you to try your products immediately so that if there is a problem, you can return them before the return deadline. We accept returns and exchanges up to 21 days after childbirth, except on open software box, printers Designjet Z2100 series, HP Color LaserJet CP6015dn printer, and gift cards (except where required by law). After the period of 21 days, you can get support for questions of HP customer service product.
  
  Credits

  Credit for Returns or exchanges is given when confirm us the receipt of the goods. Please be aware that your financial institution may take 5 to 7 business days to process your credit and let the account in your account.
  
  Refunds

  Tax (if any) is refunded with returns.

  Original shipping and handling are not refundable.

  When you return the items in a group of items purchased, the remaining amount spent maybe is more eligible for a discount, you may have received (for example, for gifts with purchase, free gift, purchase in quantity). If this is the case, the discount is subtracted the price paid for the returned item. To receive a full refund, all items in the original purchase must be returned.

• When "allow pages to choose their own colors, instead of my selections above" is not checked in the menu options, I can't see images on Web sites. How can I maintain with the box unchecked and always display images?

  I recently decided to spend autour colours in Firefox. I work in a fairly dark environment and have the dark color on white or light background text is quite difficult on my eyes in the dark.

  I changed the background to a dark gray, light gray text and visited the two and links not visited in a blue light. With these changes, I unchecked the "allow pages to choose their own colors, instead of my selections above" box.

  After unchecking the box, I'm more able to display images on many sites. Turn all grey images - as if Firefox has changed their image in part of the background. When I check the box, I am able to see fine pictures, however, Web sites typically return to their light background with dark text.

  Any help and assistance with this is greatly appreciated!
  Thank you!

  You can use the NoSquint extension to define the font size (zoom text/page) and colors of text on web pages.

  • NoSquint - https://addons.mozilla.org/firefox/addon/2592

• For the boxed version of Lightroom 6 run on Windows 10?

  I just purchased Lightroom 6 at Staples thinking he'd go on Windows 10. However, after getting home and you're looking at the back of the box, it doesn't say Windows 10. It is said that it works on Windows 7, 8 and 8.1. I don't want to open the box until I don't know that it is Compatible Windows 10 in case I need to return it. Also, is there a CD or DVD in the box? What is a download key in the box?

  Employees of Staples could not answer these questions for me.

  Hello

  Please see Re: Lightroom 6 / 10 Windows

  Lightroom 6 and Windows 10

  Lightroom 6 & Windows 10

  Lightroom on Windows 10 6

  I hope this helps!

• How to change the return service for the configuration of pair of Eve Active

  I created the pair of Eve Active (no Clusterware) with service return TWOSAFE RETURNS the value.
  

  create active standby pair
   dbactive on "server1",
   dbstandby on "server2"
    return twosafe ;

  How can I change of RETURN TWOSAFE changed to RETURN RECEIPT?
  
  Thanks in advance for the help.
  
  Kind regards
  Gary

  You must configure the return Service to manage failures of network/timeouts. See 'Establishment' will return failure political failure/recovery service here (http://docs.oracle.com/cd/E21901_01/doc/timesten.1122/e21635/design.htm#TTREP342)

  The Return Service clause allows you to set up when the transaction must be validated locally where the replication agent does not receive any acknowledgment of the intelligence officer.

  -DISABLE the RETURN sets the number of timeouts before it stops waiting for the Subscriber to answer.
  -You can set attribute SUSTAINABLE COMMIT to commit the transaction with Commit sustainable is set on the current database, after RETURN of SERVICE is disabled.

  At the application level, you can also control what you want to do if there is a timeout, you can set the LOCAL ACTION of COMMETTRE to VALIDATE or NO ACTION. If you want the agent of rep to commit the transaction locally, it is transparent to the application code. If you set NO ACTION, the application
  may decide whether to re - issue the call validation or roll back the transaction.

  The link to the above documentation has more details.

  Susan

• air.swf getStatus() returns 'available' for the installation of side car

  I hope someone from Adobe can help with this one.  We have received the license from Adobe to redistribute the Adobe AIR runtime and we use the method of side car.  Installation of AIR and our application works correctly, you can launch our app as well and rolls.

  The problem is that, sometimes, we are launching our AIR application using a Web site and the air.swf (for lack of a better word) component to determine if AIR is installed and proper version of our application.

  Under Windows, it seems that our silent installation does not have files that are accessible by the air.swf in the right place - so he reports 'available' instead of 'installed', even if AIR and our app are actually installed and works perfectly.

  During our silent installation of AIR, it appears the Adobe AIR installer puts a file (airappinstaller) that contains 2 files (the airappinstaller.exe and a digest.s) - the folder is installed here:

  \Adobe\Flash Player\AddIns\airappinstaller {program Files}

  However, the utility of the air.swf is looking for them to be installed here:

  {UserFolder} \AppData\Roaming\Macromedia\Flash Player\ \bin\airappinstaller www.macromedia.com

  It seems the first time everything is installed, two folders will be created correctly.  But if the user has subsequently uninstalls AIR, when they use our Installer to re - install AIR (and our application) "Macromedia" folder is not created.  If manually copy us the files in the folder in the box "ProgramFiles\Adobe" in the Macromedia air.swf file then starts the correct status of statement again.

  How we overcome this problem to avoid calls to technical support on this?  Is there a flag that we can move the installer?

  We get the same result using Windows 2008, XP and 7

  It is a little unhappy quirk of the installer of the AIR. When you perform a silent installation as an administrator like you do, it is generally not possible to write to the location of each user that the badge again. To counter that almost any when you do anything as a user in the AIR we will copy the files airappinstaller and other things by user to their correct if necessary locations. There is also a specific flag, you can switch to the Installer application for this

  / Applications/utilities/Adobe\ AIR\ Application\ Installer.app/Contents/MacOS/Adobe\ AIR\ Application\ Installer - updateUserState

  If you run that, as a user, it should fix everything up

• Add value (0 or 1) for the boxes and adding them

  Is it possible to automatically add the number of boxes that are enabled? For example, if there are 20 check boxes, is there a way to create a script that counts the number of boxes checked? So if 13 boxes are ticked, he say 13, if 17 is checked, it will say 17, etc...? If you could answer, I would be very grateful. Thank you.

  Also, I found how to make of the text box in the "Total Points" be the product of 'Total' and 'Points by article' elements, so to make the slot fully automatic form, I just need "Total posts" box to add each checkbox in the column.

  

  Yes, it can be done. This function returns the number of boxes checked based on the array of names that you provide to it:

  function countCheckBoxes(fields) {
      var total = 0;
      for (var i in fields) {
          var f = this.getField(fields[i]);
          if (f==null) {
              console.println("Can't find: " + fields[i]);
              continue;
          }
          if (f.value!="Off")
              total++;
      }
      return total;
  }
  

  So you can call it that since the custom calculation of a text field script to fill in with the number of boxes checked:

  event.value = countCheckBoxes(["Box1", "Box2", "Box3", "Box4"]);
  

• stuck in the selection box sent-no available for the box of reception, et al.

  The selection box disappeared, so who can be in shipping mode. Even if I stop and restart the emails sent with no possible output mode developed. I can go to the Explorer & log on Comcast & find my incoming emails in this way but I would go back to your system.

  Maybe your 'selection box' is the folders pane which is normally on the left side of the window with all your records of account registered.

  You have a Menu bar with file-Edit-View etc. showing?
  If this is not the case, press the alt key to bring up.

  In the Menu bar select view-presentation-folder pane

  If the folders pane is checked and it still doesn't show?

  If so, make sure that your Thunderbird window is maximized. Then move your mouse on the left side of the window and look for it to turn into a double-headed arrow. When he, left click, hold down and drag to the right to find the folders pane.

• 5 true or false of entry for the box Structure

  Hello!! I have 5 switches requiring toggles (one at a time). It does not work when it is connected to the DAQ Assistant and able to check which one is which without problem... Is it possible to apply in the structure of the case? In the structure of the case, I have a sub vi than speed of reading and I want only that it is active when there is a switch turned on, so it will read 0 (zero) when the switch is CLOSED.

  I just answered this Q for Boolean values (3) yesterday in this thread.

  Ben

• Return summary for the masters of query classes

  Hi all

  I use oracle database 11g r2.

  I have 2 tables,

  create tabel expenses_heads (exp_head_id number primary key,
                                               Main_exp_name varchar2(100) not null,
                                               refer_exp_head_id number);
  alter table expenses_heads add constraint fk_refer_head_id foreign key(refer_exp_id) references expenses_heads(exp_head_id);
  create table expenses (exp_id number primary key,
                                     exp_head_id number references  expenses_heads(exp_head_id) not null,
                                     exp_name varchar2(100) not null,
                                     exp_date date not null,
                                     exp_amount number not null,
                                     receipt varchar2(20),
                                     remarks varchar2(4000));
  i have the following data,
  insert into expenses_heads values(1,'School',null);
     insert into expenses_heads values(2,'College',null);
  insert into expenses_heads values(3,'Bills',1);
  insert into expenses_heads values(4,'Hardware',1);
    insert into expenses_heads values(5,'Food',1);
  insert into expenses_heads values(6,'Dress',1);
  insert into expenses_heads values(7,'Hardware',1);
    insert into expenses_heads values(8,'Admission',2);
     insert into expenses_heads values(9,'Office',2);
  insert into expenses values(1,3,'Electricity Bill',sysdate,1000,null,null);
  insert into expenses values(2,3,'Water Bill',sysdate,100,null,null);
  insert into expenses values(3,4,'Chair',sysdate,1000,null,null);
    insert into expenses values(4,4,'Tables',sysdate,200,null,null);
    insert into expenses values(5,8,'Admin Ceremony',sysdate,3000,null,null);
      insert into expenses values(6,9,'Stationary',sysdate,2000,null,null);
  commit;
  

  now, I want to write a query relating analytical columns, Main_exp_name(from expenses_heads) and Total_amount (from expenses)

  result should look as below

  Main_exp_name                         Total_Amount
  College                                        2300
  university                                     5000
  

  I think it could be written using the Group of and rollup, cube or grouping sets, but confused.

  kindly help.

  Hierarchical query using:

  select h.main_exp_name, sum (exp_amount) exp_amount
  from expenses e
  join
    (
      select refer_exp_id,
        exp_head_id,
        prior main_exp_name main_exp_name
      from expenses_heads
        connect by refer_exp_id = prior exp_head_id
    )
    h
  on
    (
      e.exp_head_id = h.exp_head_id
    )
   where main_exp_name is not null
   group by h.main_exp_name;
  
  MAIN_EXP_NAME                                                                                        EXP_AMOUNT
  ---------------------------------------------------------------------------------------------------- ----------------------
  School                                                                                               2300
  College                                                                                              5000
  

• Return of records only for the current month

  Hello
  
  I have a query that returns records for the current week and I want to extend it for return records for the current month.
  
  When TRUNC (start_date) < NEXT_DAY (TRUNC (CURRENT_TIMESTAMP) - 1, "Sat") + 1
  AND TRUNC (end_date) > NEXT_DAY (TRUNC (CURRENT_TIMESTAMP) - 1, 'Sam')-7
  
  I have two date fields, the first is called 'Start_Date', the second is called 'End_Date '. I want the query to return all the records for the current month including those who may start before or end post the month as events can start in a month and end with another. Does anyone know how this is done in a "Clause where?
  
  
  
  Kind regards
  
  Steve Welch

  You probably want to

  where TRUNC (START_DATE) <= LAST_DAY(TRUNC(sysdate, 'MONTH'))
  AND TRUNC (END_DATE) >= TRUNC(sysdate, 'MONTH')
  

• Return of the records for the current month, previous and next

  Hello.
  
  Robert Charlton contributed to my last question on this topic and thank him once more for this.
  
  When you filter the results of the report by using the following database returns records for the current week:
  
  
  WHERE 'SS_LEAVE '. "" LEAVE_TYPE "="SS_LEAVE_TYPE. " "" IDENTITY CARD ".
  
  AND)
  InStr (superior ("EMPLOYEE"), upper (nvl (: P2001_SEARCH, 'EMPLOYEE'))) > 0 or
  InStr (upper ("SUPERVISOR"), upper (nvl (: P2001_SEARCH, 'SUPERVISOR'))) > 0
  )
  AND TRUNC (end_date) < NEXT_DAY (TRUNC (CURRENT_TIMESTAMP) - 1, 'Sam') + 1
  AND TRUNC (end_date) > NEXT_DAY (TRUNC (CURRENT_TIMESTAMP) - 1, "Sat")-7
  
  
  My question is this time is:
  
  How to make a filter for the current month, the 'previous month', and 'next month '?
  
  
  Kind regards
  
  Steve Welch

  Steve,

  Current month:

  and trunc(end_date) >= trunc(current_timestamp,'MM') and trunc(end_date) < add_months(trunc(current_timestamp,'MM'),1)
  

  Previous month:

  and trunc(end_date) >= add_months(trunc(current_timestamp,'MM'),-1) and trunc(end_date) < trunc(current_timestamp,'MM')
  

  Next month:

  and trunc(end_date) >= add_months(trunc(current_timestamp,'MM'),1) and trunc(end_date) < add_months(trunc(current_timestamp,'MM'),2)
  

  -David

• Access the values of the checkboxes unchecked in a report.

  Hi all

  I have a report to track the attendance of students in classes.

  The report has values from several tables, including students, class, object, class_meeting etc.

  The report includes all students enrolled in the class and it has a check box field that is used to determine whether or not they were present at the meeting of specific class.

  The box is the student_id column and it is checked when the 'present' field is 1 and unchecked when the 'present' field is 0, it is implemented like this:

  apex_item.checkbox2(1, student_id, DECODE(present, 1, 'CHECKED', null))
  

  According to the documentation of the api.

  I also created a submit to the process that looks something like

  FOR I in 1..APEX_APPLICATION.G_F01.COUNT LOOP
    UPDATE class_meeting SET present = 1 WHERE student_id = APEX_APPLICATION.G_F01(i);
  END LOOP;
  

  So far so good. What I want to do is, say that the Professor opens the new report and uncheck one of the students, and submits the page, how can I set up "presents" to 0 for the uncontrolled student?

  The main issue which I suppose is, how to access values of the boxes unchecked, with one subject to the process.

  It will fail. Unchecked the boxes DO NOT send a value in session state. For example 10 students-> 10 records in table f01. Checked the file 3-> 1 plug in f02 array with the value 1. Pretty useless.

  Keep the boxes to tick with the PK as a value AND add an element hidden with the student ID. In this way, you can associate the boxes up to the correct record.

  A way to deal with the other, now unchecked, check boxes, would probably be to update records for current is set to 0 and then update the records for which the boxes have been checked.

  BEGIN
    -- set all students as not present before setting those who were
    update class_meeting
       set present = 0
     where meeting_id = PX_MEETING_ID;  -- The meeting has a PK of its own I suppose.
  
    -- Array F01 = checkbox, student IDs
    FOR i in APEX_APPLICATION.G_F01.COUNT LOOP
      update class_meeting
         set present = 1
       where student_id = APEX_APPLICATION.G_F01(i);
    END LOOP;
  END;
  

  Moreover, the student ID, then in this loop loop see if you can match the ID with a record in the table of the checkbox. If you can: submit, if you can't find any: absent.

  DECLARE
    l_found BOOLEAN;
  BEGIN
    -- Array F01 = student IDs
    -- Array F02 = checkbox, student IDs
    FOR i in APEX_APPLICATION.G_F01.COUNT LOOP
      l_found := FALSE;
      FOR j IN APEX_APPLICATION.G_F02.COUNT LOOP
        IF APEX_APPLICATION.G_F02 = APEX_APPLICATION.G_F01(i) THEN
          l_found := TRUE;
          EXIT;
        END IF;
      END LOOP;
  
      IF v_found THEN
        update class_meeting
           set present = 1
         where student_id = APEX_APPLICATION.G_F01(i);
      ELSE
        update class_meeting
           set present = 0
         where student_id = APEX_APPLICATION.G_F01(i);
      END IF;
    END LOOP;
  END;