Return to the last code position

Similar Questions

• Cursor Oracle return only the last record

  I am a newbie in oracle stored proc. I tried to select data using the slider, but it only return last record. The recording must be greater than 1.
  
  CREATE or REPLACE procedure MySchema.Test (myrefcur on sys_refcursor)
  Is
  
  Begin
  declare
  
  Cursor C1 IS
  
  Select mySerialNum from TableA;
  MyRecord C1% rowtype;
  
  Begin
  Open C1;
  Loop
  Fetch C1 into myrecord;
  When the output C1% NotFound;
  
  Open for Myrefcur
  Select SerialNumB from TableB where SerialNumB = myrecord.mySerialNum;
  
  End loop;
  Close C1;
  End;
  end;
  
  However, it only returns the last record in the list.
  
  Original case *.
  The original code is as below:
  
  1st, I'll need to select a list of ImageSerialNum of ImageSerial
  
  * 1 query:
  Select A.ImageSerialNum from ImageSerial A, ProductionOrder B, Bom C
  Where A.ProductionOrderID = B.ProductionOrderID And B.Assembly_Num = C.Model_Num and
  B.Revision = C.Revision And B.EngRevision = C.EngRevision and
  C.Bom_ID = passInVariable* and C.FactoryID = "7"
  
  2nd, I'll need to check the process of EACH series with the code below:
  
  * Low code a return process for 1 series only.
  
  Select t.processid, t.processname, t.assembly_num, t.revision, t.engrevision of
  (Select p.ProcessID, p.ProcessName, in. Assembly_Num, in. review, in. EngRevision, im.imageserialnum
  Process p, Routesequence rs, Imageserial im, ProductionOrder in.
  Where im. ImageserialNum = SerialNum* and p.ProcessID = rs. ProcessID
  And rs. RouteID = in. RouteID and rs. SequenceID = im. NextRouteSequence
  And in. ProductionOrderID = im. ProductionOrderID AND IM. STATUS OF '0'
  UNION
  SELECT A.REWORKROUTEID AS PROCESSID PROCESSNAME AS B.ROUTENAME, C.ASSEMBLY_NUM, C.REVISION, C.ENGREVISION, a.imageserialnum
  OF IMAGESERIAL A, B OF ROAD, PRODUCTIONORDER C
  WHERE A.REWORKROUTEID = B.ROUTEID AND A.IMAGESERIALNUM = SerialNum*.
  AND A.PRODUCTIONORDERID = C.PRODUCTIONORDERID and a.status = '0') t
  
  After that, I would like to combine the two in 1 stored proc code.

  in this case, you just want to join the two applications to use in the FROM clause
  As I don't have your tables, I created two tables, each representing the results of your queries. Substitute the names of table with your queries

  SQL> drop table master
    2  /
  
  Table dropped.
  
  SQL> drop table details
    2  /
  
  Table dropped.
  
  SQL>
  SQL> create table master
    2  (ImageSerialNum varchar2(25));
  
  Table created.
  
  SQL>
  SQL>
  SQL> insert into master values ('Serial1');
  
  1 row created.
  
  SQL> insert into master values ('Serial2');
  
  1 row created.
  
  SQL> insert into master values ('Serial3');
  
  1 row created.
  
  SQL> insert into master values ('Serial4');
  
  1 row created.
  
  SQL> insert into master values ('Serial5');
  
  1 row created.
  
  SQL>
  SQL> create table details
    2  (ImageSerialNum  varchar2(25)
    3  ,ProcessID  number
    4  ,ProcessName varchar2(25)
    5  );
  
  Table created.
  
  SQL>
  SQL> insert into details values ('Serial1',  1, 'Process1');
  
  1 row created.
  
  SQL> insert into details values ('Serial3',  3, 'Process3');
  
  1 row created.
  
  SQL> insert into details values ('Serial5',  5, 'Process5');
  
  1 row created.
  
  SQL>
  SQL> select m.imageserialnum
    2       , d.processid
    3       , d.processname
    4    from master m
    5    left outer
    6    join details d
    7      on (m.imageSerialnum = d.imageserialnum)
    8   order by m.imageserialnum
    9  /
  
  IMAGESERIALNUM             PROCESSID PROCESSNAME
  ------------------------- ---------- -------------------------
  Serial1                            1 Process1
  Serial2
  Serial3                            3 Process3
  Serial4
  Serial5                            5 Process5
  

  your query will be something like

  select m.imageserialnum
       , d.processid
       , d.processname
    from () m
    left outer
    join (
  

• No sound output to Avi return after the last update CC

  Hi there everyone,

  Am that I the only female victim out silent on each rendered AVI I do since the update to the latest version of AE CC? QuickTime works fine, so I returned to QT in my workflow again (a few CC versions earlier it was QT makes that came out with "drop-outs" and all other types of problems, so at this point I went to AVI) to work around this problem, but it is an obvious bug since the last update. I simply add a comp to the render queue, no matter if I choose Audio 'Auto' or 'On', all AVI's going out with no noise at all. Copies the render queue item, leaving each parameter, as is, but QT to select as output will make it very well with the sound. That's happened? Why even the simplest, most basic things that have worked very well since AE version 0.0 suddenly break when an update is launched? Updating becomes more risky as never before, it seems. Adobe please listen to this...

  See the last item on this page:

  known issues in after effects CC 2015 (13.5)

• Carriage returns in the HTML Code, creating additional spaces between elements

  I looked everywhere online and cannot find the solution to my problem. I found several pages explaining a similar event, but no solution.

  When you put several divs side by side, I would like to visually display the code as a div by line: (see image) to do this, I have to use returns in my code (this method makes editing much easier visually). But doing so adds an extra space between the divs that turns a game of 3 columns of thumbnails to 2 columns. I can fix it if I adjust the physical margins between the divs, but this isn't the only solution.

  

  The other difficulty is that if I put the code back to back to back (see picture): what makes the div behave and appear as they should, but now the code is a Visual disorder because it is very crowded.

  

  What I want is to be able to use as many carriage returns in my code and for browsers to ignore these types of line breaks in the code. So, basically, how can I get away from these extra spaces when you use returns in the code?

  I think that your two pages have a missing at the end somewhere.

  OPPS... it happened when I was stripping down the page to create a working example of my question. I set the div missing and re-uploaded both pages. The problem is still there.

  Change display: inline; float: left; and add margin: 0 0 4px 4px; (as shown below)

  I had already tried to use floats, but something else in the code forced the columns to 2 instead of 3.

  'Apply Source Formatting' did you use?

  I use that religiously. I'm quite anal about visually clean code.

  Well, I just fixed the problem while responding... funny... I removed the margins of the element img real (.imageThumb img) and placed on the div that surrounds the img (.imageThumb). I also reapply the float. Thank you all for the help - it helped me rethink. But I could have sworn I had once placed the margins on .imageThumb before and it didn't work.

  {.imageThumb}

  Width: 100px;

  height: 75px;

  display: inline;

  float: left;

  margin: 0px 10px 10px 0px;

  cursor: pointer;

  }

  .imageThumb img {}

  / * margin: 0px 10px 10px 0px; * /

  }

• Return to the last slide

  Hi guys. My project has 2 blades help and we can navigate between them, (they are 2 and 3 of the slides). Slide 3 is accessible from any of the other blades, and from there, the user can decide what kind of assistance they need. My problem is I want the user to be able to return to the slide, where they accessed assistance. Of course, a simple button with a "return to the next slide" action is useless, as if they access the two slides help and then try to return that they are in the loop 'help '. So my question is "How do I do that?

  As always, any help greatly appreciated.

  Robbie

  Here is the link: Navigation help glide - Captivate blog

• "I lost the top of my Web page that has"File"Edit etc and the toolbar with the House for 'House' and the arrow of" return to the last page. Does anyone know how to reinstall these? I'm obviously not computer savy.

  Missing once more, the blue band at the top of my Web page that has the file ',' Edit etc and the toolbar with the House for 'Home' and the arrow «back to last page»

  == My grandchildren's play about that.

  Press the Alt key to display the Menu bar, then open view > toolbars and select menu bar and the bar of Navigation, so that they have a check mark.

• How to get the status returned by the last process

  I use LaunchExecutableEx to start the Java executable. Once this process ended it returns a value. How can I get this value? GetLastError () does not work.

  Hello

  I call my CVI programs also sometimes other executables.

  Best method to get data out of them is to direct the output to a file, and then read and parse the file.

  "myOtherExe.exe > out.txt" ordered an executable output to the output window of file and no standard.

  Once the executable has ended, you can read the file to get information about its status.

  Kind regards

• updated configuration failure Vista - updates not configured correctly. returning from the changes - code Error 80070020

  Updates installation but to the message indicating a configuration step 2 bed 'updates not configured correctly. reverting changes"error code is 80070020.

  http://support.Microsoft.com/kb/883825>

  08/10 / 1106:12:26

• Return to the last page on a single page web site

  I have one site of Muse page which has links to the same image gallery. How can I get this back to where it was made? Currently, I have a copy of the gallery and the "fence" this gallery to return to this part of the embedded page. I have an idea that there is a simple answer that I think just not.

  You can add another anchor point on the same location of the gallery where users can click that anchor for example 'Return' to get back to the same location of the page.

  Thank you

  Sanjit

• Adobe Reader 11 will not return to the last page you read, but because of version 10

  Hello

  I just installed Adobe Reader version 11. When I start to read a pdf file, it will not start on the page where I left off last.

  I had version 10, and he would start on the page where I finally left (at the previous session).

  Is there a way to get version 11 to do what would make my version 10?

  For example, if I studied my Excel book and left to page 70, closed Adobe Reader, then recovery thereafter, Adobe Reader automatically start on page 70 (for the Excel book that I study since).

  However, now with Adobe Reader version 11, it does begin at the front of the book pdf.

  Is there a way to get version 11 to remember the page whatsoever when I close the book pdf?

  Thank you very much

  Edit > Preferences > Documents > open settings, select 'Restore last view settings... ". »

• When I close the tab it does not return the last active tab

  My English is not very good, so I'm sorry about that. I want to return last active tab when I close a tab.
  Example; I use 2. tab, then I spend 4. tab, then close it. Firefox goes to 5. tab, not 2. I did a google search, but I can't find anything useful.

  OK, I tried the ' tab mix more ', it has the option "return selected the last tab" when closing tab, it works, but he also broke something. When I open a link in a new tab by currently tab, it opens right into the stack tab. I checked if "browser.tabs.selectOwnerOnClose" is changed to about: config, but it is not changed, its value is true (the default). The addon made it's ineffective, I think.
  So I'll try to find another addon. (open to suggestions)

• Word and the calculator do not remember last window position when opening

  I have a problem with the position of the window for Word and calculator.  They don't remember the last position when open.  I tried numerous strategies online such a ctr + close, etc..  What happens is that they will remember the position of the next 2 times they open and then, when opened for the third time, they pass to the left corner of the upper screen.  Excel, Explorer, etc., seem to remember the last screen position and size.  Why not the word and the calculator?  Running Windows 7, 64 bit, Dell 24 inch monitor.  I would like to than the calculator to always open in the lower right corner.  All the patches?

  Thanks for these suggestions.  The problem occurred at any time in the past.  Surprisingly, before me, start to implement your suggestions, there was a series of 15 + / Windows updates.  After these updates, problem solved.

  Don't know why it happened to Word and Excel or Outlook, as they are all of the same suite of Office 2010.  Before post me my question, I did re install Office, and he did control the problem, but only briefly.  I'll see if these new Windows Update solves the problem for a longer period of time.  Hope so.

• How can I get the read head to return to the location, it's immediately before starting playback. This used to be a preference but I don't find it in the latest version of logic.

  How can I get the read head to return to the location, it's immediately before starting playback. This used to be a preference but I don't find it in the latest version of logic. What I want to do is; Once playback is stopped the playhead returns to the previous starting position. Where is the setting for this? Is it still an option that I can find nothing in the online help.

  Hi there, don't you mean this one?

  

  Good day!

• What happens when two computers call the same code stored in networked storage?

  We have our code on the network storage and have worked on a single computer code.  We have now replicated our configuration and want to use the same code to run the new installation to another computer.  We want to run simultaneously both configurations (both using the same storage networking code).  Will there be conflicts here, or both computers load their own copy of the vi to run from?  I must say that we do not have global variables.

  I am interested in the answer to this question anyway, but I'd be happy to hear any suggestions (or even critical) on how to do what we do.

  You should seriously consider a source control system, which is the best solution here. This gives you an original copy of the code on the network. Each computer retrieves the latest revision of the source control, make a copy on the local disk. Source control keeps a good backup and allows you to track and compare the versions or to return to the old code, when something breaks.

  I'm fairly certain that you can open the same screw that is stored on a network drive on multiple computers simultaneously. Global variables are not relevant here. Each computer is independently responsible for the screw in memory. The problem is if edit you and save the VI on a computer while it is open on another, and if you make changes on both at the same time, will certainly lose you some of her edits and could possibly corrupt your VI and lose all, that's why you should use a source code control system.

  If you have the request of the manufacturer, I recommend your building code in an application. You can store the network application if you want and run it on multiple computers.

• No update of the 80070bc9 Code error

  Windows Update is updated automatically and constantly update of an important update - update for Windows 7 for systems x 64 (KB976098) fails (details below)

  He returned with the error code 80070bc9

  
  

  Download size: 482 KB

  
  

  You may have to restart your computer for this update is taken into account.

  
  

  Update type: Important

  
  

  Install this update to resolve the problems caused by the laws revised in several countries time and time zone. This update enables your computer automatically adjust the clock of the computer on the correct date in 2009. After you install this item, you may have to restart your computer.

  
  

  More information:

  http://support.Microsoft.com/kb/976098

  
  

  Help and Support:

  http://support.Microsoft.com

  Hello
   
  I suggest that you follow the steps below:
   
  1. disable the firewall, Antivirus.
  2 manually install the security update go to Microsoft Download Center and then click ignore when the error message appears.
  Download the stand-alone packages of these updates and install.
  Download the update for Windows 7 for x 64-based systems (KB976098) package now.
  3.Re - turn on the firewall, Antivirus, once the update is installed.

  Alternatively, you can try to reset the Windows Update components.
  To do this:
  1. click on the following link: http://support.microsoft.com/kb/971058
  2. click on run in the file download dialog box and follow the steps described in the fix it Wizard.
   
  Thank you, and in what concerns:
  Swati K - Microsoft support technician