Returns the name of the Group window

Similar Questions

• After this evaluation period how can I return the original windows

  After this evaluation period how can I return the original windows

  By reinstalling the Moose of operating system or factory reset (if your computer supports)

  You will need to re - install all the applications you added since as well.

• Server domain membership in the group Windows 2003 functional level - windows API

  Hello

  I'm a programmer trying to get the members of a group of global domain by using windows server 2008 enterprise edition

  in the past it was not a windows server 2003 functional level, but when the 2003 functional level appeared a new features have been added such as the addition of

  a global group as a member of another global group in the domain,

  in the past, the written API could obtain the Member if the Member is a user, but you cannot find a member if it is a global group.

  I use this "NetGroupGetUsers" API to get a members of a domain global group and he gets the users but it does not get the

  Members if they were global groups...

  I tried an other API "NetLocalGroupGetMembers" it becomes a global group as a member but it only works if the owner was a local group on the server
  or on another machine which is added to the server, but this API does not work if the owner of the Group was a domain global group.

  My question is how to get the members of a global group whose members who are global groups too?

  Thank you

  -Shomaf

  Try asking in the Windows Server forum:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• ProBook G1 430: Encrypted hard drive and the corrupt Windows Installation

  My laptop has an encrypted disc using HP drive encryption.  Recently, the Windows installation has become corrupted and I could not repair the installation using floppy disks to install Windows because they cannot access the encrypted drive, nor can they be accessed by other facilities of Windows if I plug in the external drive.  The two methods see the Windows partition as a RAW format.  I guess it's only because the partition is encrypted and has no way to determine the actual format type.

  I searched around to find clues as to how I could get past the encryption, but without success.  The computer is no longer under warranty, so I'm looking for options that will allow me to have access to the data.  The methods I've read all required the computer under warranty.

  I can still go through the encryption after the computer starts, but Windows Setup gives an error and tells me that I must use an installation disk to fix.  I have attached a picture of the screen of the error.

  I'd appreciate any help anyone could provide to solve this problem.

  After much patience and time on the phone with HP, I finally able to return the encrypted Windows installation.  They gave me a copy of the WinPE environment was a software that allows you to decrypt a partition which was encrypted with their software and execute commands Windows on it.  I then ran the repair bootbcd order and I was able to get Windows to start.  To obtain this software, my case should be escalated to tier 2 support.

• How to select the photos I want to import in the import Windows 7 Wizard, and how to change their name to a group of the name custom when importing?

  Has features missing from Windows XP in Windows 7?

  I'm doing a simple import of photos using the option 'Import pictures and videos using Windows' native Autoplay.

  In Windows XP, I could choose what images to import and give them all the basic name custom during the import process, with each photo added later with a "001", "002" etc using the scanner and Camera Wizard.  It is very convenient because it could have been hundreds of photos on some of my cards from a long period of shots, I could run the tool more than once for different groups of photos that I would choose Import, and the pictures would be get named sequentially and stored in their files you want immediately.  I imported thousands of photos in this way.

  This new tool for Windows 7 allows me to add tags to all of the photos on the cards and devices and name photos after their date, or on the label, or other combinations of that... but why doesn't this new tool in Windows 7 suppose I want to import every single photo on the card device / I just connect and more that I want them all to have the same tag assigned to them?  It's stupid and useless - there, makes only has pictures of a theme on their card at any time that they connect to import their photos and always wants to import everything each time?

  To illustrate this point, let's look at my current situation.  I'm just on vacation in Europe and took pictures to more than one place, I visited, of course and now I would like to mark photos with the location of the names individually... or even more, I would like to actually name photos when importing with the name of the place in the picture.  Scanner and digital camera Assistant & would do that, no problem - you just had to run the tool once for each different group name, then select the appropriate images to import with the same group name.  It has been easy.  This type of naming is far superior to the addition of tags to images named simple-list or date-wise because you can tell what the image file in your library that you want to open just by going to (or get) the group name.  Want to see pictures of St. Peter's Basilica?  If you named the photos with that (added with 001, 002 etc), then simply browse to that name in your folder of photos «The Italy, holiday 2010»  Without trying to find photos Tags into the sea by the name of "IMG20100324005" - soup and no program Photo Gallery Windows Live Photos or necessary Picasa.

  This new program in Windows 7 for the import of images does not appear to be able to handle the very handy feature of its predecessor Windows XP.  It's very frustrating to have opted for the version of Windows newer and supposed to be 'better' but find several programs that have been very useful for XP have valuable features removed or are no longer present at all (like how Windows 7 is no longer a Clipboard Viewer - that has great idea that is?).

  So is it possible to recover the image import feature I apparently lost by 'redevelopment' of Windows Windows 7?  I could of course go and buy an image import and edition program (Smart Photo Import very nice for the price, a quick search I just do), but as this feature was native in Windows XP it is still stupid to have to buy a 3rd party simply program now because Microsoft does not understand the idea of keeping popular features in their software and seems rather "he dumb down.

  Any help to select the pictures I want to import and naming them when importing with a custom group name using the import wizard would be greatly appreciated... + 10 GB of photos and videos of this trip is sitting & waiting for a solution!

  Has features missing from Windows XP in Windows 7?

  I'm doing a simple import of photos using the option 'Import pictures and videos using Windows' native Autoplay.

  In Windows XP, I could choose what images to import and give them all the basic name custom during the import process, with each photo added later with a "001", "002" etc using the scanner and Camera Wizard.  It is very convenient because it could have been hundreds of photos on some of my cards from a long period of shots, I could run the tool more than once for different groups of photos that I would choose Import, and the pictures would be get named sequentially and stored in their files you want immediately.  I imported thousands of photos in this way.

  This new tool for Windows 7 allows me to add tags to all of the photos on the cards and devices and name photos after their date, or on the label, or other combinations of that... but why doesn't this new tool in Windows 7 suppose I want to import every single photo on the card device / I just connect and more that I want them all to have the same tag assigned to them?  It's stupid and useless - there, makes only has pictures of a theme on their card at any time that they connect to import their photos and always wants to import everything each time?

  To illustrate this point, let's look at my current situation.  I'm just on vacation in Europe and took pictures to more than one place, I visited, of course and now I would like to mark photos with the location of the names individually... or even more, I would like to actually name photos when importing with the name of the place in the picture.  Scanner and digital camera Assistant & would do that, no problem - you just had to run the tool once for each different group name, then select the appropriate images to import with the same group name.  It has been easy.  This type of naming is far superior to the addition of tags to images named simple-list or date-wise because you can tell what the image file in your library that you want to open just by going to (or get) the group name.  Want to see pictures of St. Peter's Basilica?  If you named the photos with that (added with 001, 002 etc), then simply browse to that name in your folder of photos «The Italy, holiday 2010»  Without trying to find photos Tags into the sea by the name of "IMG20100324005" - soup and no program Photo Gallery Windows Live Photos or necessary Picasa.

  This new program in Windows 7 for the import of images does not appear to be able to handle the very handy feature of its predecessor Windows XP.  It's very frustrating to have opted for the version of Windows newer and supposed to be 'better' but find several programs that have been very useful for XP have valuable features removed or are no longer present at all (like how Windows 7 is no longer a Clipboard Viewer - that has great idea that is?).

  So is it possible to recover the image import feature I apparently lost by 'redevelopment' of Windows Windows 7?  I could of course go and buy an image import and edition program (Smart Photo Import very nice for the price, a quick search I just do), but as this feature was native in Windows XP it is still stupid to have to buy a 3rd party simply program now because Microsoft does not understand the idea of keeping popular features in their software and seems rather "he dumb down.

  Any help to select the pictures I want to import and naming them when importing with a custom group name using the import wizard would be greatly appreciated... + 10 GB of photos and videos of this trip is sitting & waiting for a solution!

  ===========================================
  Perhaps the following links will propose a few ideas:

  Windows 7 - change settings for importing pictures and videos
  http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-importing-pictures-and-videos
  (don't forget to extend "Import in the view settings" at the bottom of the page)

  Windows 7 - How to make photos from my camera to my computer?
  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-get-pictures-from-my-camera-to-my-computer

  You might find the free Picasa software or Windows Live Photo Gallery
  to be useful:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Download Windows live Photo Gallery
  http://explore.live.com/Windows-Live-Photo-Gallery
  (There are other applications included in the download...
  Uncheck the ones you don't want)

  Picasa
  http://Picasa.Google.com/

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• How should I name the groups on the start page of windows 8

  How should I name a group like "music" on my Windows start page 8

  There should be a small symbol 'less' on the bottom of the screen. Click it and the groups will zoom out. Then you can select them and rename them with the options on the bar that appears at the bottom of the screen.

  Otherwise I think you can press ctrl and scroll the mouse wheel to zoom out and have access to the groups.

• getUserRoles() in SecurityContext returns the names of LDAP groups

  Hello

  getUserRoles() in SecurityContext returns the names of LDAP groups as well as the role of the user's request. Should it? If not, what could be the possible problem.

  I have OVDLDAP configured on the weblogic server.

  Thank you.

  Hello

  Yes, what is expected. OPSS API expose application roles and user roles. For the distinction between the two, I would recommend a names like app-role naming convention to identify application roles

  Frank

• in Outlook Express, how can I send the same message to a group important (in the address book already), but have to each recipient can only see his name (not the Group)

  In Outlook Express, how can I send the same message to the large group (already in the address book), but have to each recipient can only see his name (not the Group)?

  To use the functionality of the BCC (Blind Carbon Copy), in a new message window, click View | All headers and type the addresses separated by a; Or: Click the button to. You will see your list of contacts and the choice to put them in the To, CC, or BCC field. Click on an address, and then click BCC to add it. Repeat for all of the contacts you want. (Note: most of the providers have limits as to how many messages you can send both a. 25 is common, but it varies).

  Put your own address in the box to. That's the only name/address that any recipient will see. If you leave the field empty, some people may not receive e-mail because of message rules they put in place, or restrictions imposed by their ISP.

  You can also make an entry in the address book using your e-mail address, but put something like the mailing list in the area of the display.

  *********************

  You can also create groups if you send e-mail to the same people often.

  To create a group of contacts:

  You can create a single group name (or alias) to use when sending a message to several contacts at the same time. Just create a group name and add individual contacts to the group. Then just type the name of the group in the box for when you send mail.

  1. in the address book, select the folder in which you want to create a group. Click New in the toolbar, and then click New Group.
  2. the Properties dialog box opens. In the group name box, type the name of the group.
  3. There are several ways to add people to the Group:
  a. to add a person from your address book list, click Select members, and then click a name in the address book list.
  (b) to add a person directly to the group without adding the name to your address book, type the person's name and e-mail address at the bottom of the Properties dialog box and then click Add.
  to add a person to both the Group and your address book, click New Contact and enter the appropriate information.
  (d) to use a directory service, click Select members, and then click search. Select a directory service in the drop-down list at the end of the text box. After finding and selecting an address, it is automatically added to your address book.
  4. Repeat for each addition until your group is defined.

  Note

  a. to view a list of your groups separately from the list of address book in the address book on the view menu, make sure that folders and groups is selected.
   
  b. you can create multiple groups, and contacts can belong to several groups.

  If you want to send to a group without addresses are displayed for each recipient, open the address book and make a new entry. Enter the name of the group in the area of the display, but use your address. (Some Internet service providers require a legitimate address in the line to and recipients will know it's from the Group).

  Click on the button to. Enter the name of the group using your address. Enter the group in the BCC field.

• Columns of folder: by default, how can return the first column 'Name' without having to move it manually every time?

  Something's happened awhile and when I create a folder which appears the first column is the column 'Date modified '. By default, how can return the first column 'Name' without having to move it manually every time?

  Hello

  I suggest you to visit these links and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/working-with-files-and-folders#section_4

  http://Windows.Microsoft.com/en-us/Windows-Vista/folders-frequently-asked-questions

  It will be useful.

• Effects of the change of name of ESX host windows vcenter server sits

  I made a change to an ESX host name and now I can not connect to the windows server vcenter is sitting on.   The vcenter sitting Windows VM on the ESX.  Now, I can not ping or you connect to the windows server.   I tried to change the hostname to return but still cannot ping the virtual Windows machine, impossible to connect with the client of the infrastructure, cannot RDP to windows VM, etc..   Is there a way to fix what broke?   Thanks for the help.

  Have you tried to connect directly to the host ESX (with the vSphere Client) and change the configuration of the virtual machine and the host vCenter? How about using worms forward in DNS to get the new name to resolve the old names of servers? In this way, either name can be used to communicate with the same boxes/VM... I've done it before to other servers (not the virtual computer at the time) when we installed a new server to replace an older and got a name change (to follow the company standards). We had agents in place who wanted the old name of the server, in order to make adjustments in the system DNS has allowed these agents to connect to the new server and facilitated by the migration.

  In general, I leave the host names and only once built server names vCenter. The best time to change is when you install the fresh software/OS, not at a time later than in fact. It is a good policy to have all areas...

  VMware VCP4

  Review the allocation of points for "useful" or "right" answers.

• return the hostname vmhost FULL domain name only

  I try to only get the part only my list of VC esx server host name

   
  $vmhosts =  get-vmhost -Location (get-cluster -name "TestCluster") | Select-Object Name
  

  And which returns:

  Name
  ----
  server1.mydomain.com
  server2.mydomain.com
  server3.mydomain.com
  

  What I would like returned is only the host name of the name part.

  I am still not entirely object pipeline and manipulation to get the correct correct syntax. I have a few think different, usually ending up with the method call failed... and Expressions are allowed as the first element...

  I can get the host name part in doing something like this:

  $myvar="server1.mydomain.com"
  Write-host $myvar.substring(0,($myvar.indexof(".")))
  

  How do I, or y at - it a way to incorporate the foregoing (something better) in the original that I am only a list of host names of the pipeline?

  You can use the ForeEach-object cmdlet and a regular expression to extract the host names.

  $vmhosts =  get-vmhost -Location (get-cluster -name "TestCluster") | %{([regex]"(\w+)").Match($_.Name).Groups[1].Value}
  

• Display full name slice in the property window?

  

  Hello

  Normally when I select a slice, the Properties window displays the name of each additional including the name of the page. However, for some unknown reason, he has now changed by showing only the _r? _C? only the suffix.

  Is it possible to return it back then complete name appears?

  Bob

  Also, try this: open a new document and create a slice. The same behavior occurs?

• Show the name of the group in the query when you delete the resource

  I IOM installation so that users and their managers can ask for ad groups and only managers can revoke this resource.
  But when I remove only to see the instance instead of the group key real name because of that it is difficult to determine what resource to revoke
  I see only the name of the resource (which is the same for all) and key
  
  How can I view group instead of the key name.
  
  Please tell me how, I need it urgent
  Thanks in advance
  
  Published by: user11758334 on August 3, 2009 14:48

  Try changing tjspRequestShowResolutionTiles.jsp

  You can follow these steps to achieve
  1. get the resource instance (it is available on the jsp page, check the page to see how it is used)
  2 get the shape of process data using the method of tcFormInstanceOperationsIntf getProcessFormData (id from step 1)
  3. get name the tcResultSet returned in step 2 by using method getStringValue ("UD_NAME") where UD_NAME is the name in the form
  4. on the page, find where targetResourceInstanceKey is printed and replace with the value found in step 3

  Let me know if it works
  Sam

• After you have reinstalled Th 38 (due to a problem of XPCOM), it now opens, but the large windows is stuck to one that opens with the name of the account.

  I think that Th 38 was the reason why my computer did not open at the total. Once that has been fixed, Thunderbird does not open more (error: XPCOM). After you have reinstalled Th 38 now I can open it and it looks good with the left pane, but the large window on the right is glued to that shows when you click on the name of the account (top folder in the left pane). None of the folders work, and none of the tabs on top of the page or the other. The only things that work are the links in the large window. I can see and open your messages by searching in the Inbox, for example. Would be grateful for any help!

  Looks like the problem is solved! I was appalled when I saw how many emails I had stored and deleted a large number of them. Then after restarting the computer, everything seems to be back to normal! Praise be to God! Too, Firefox seems to be back to normal after that I did a cleaning.

  Thanks anyway!
  Greetings from AngieP

• Need to display the name of the tab group, while the group is open

  I have a lot of groups. When a group is opened, I would like to see the name of this group without clicking on the icons in groups

  Hello, you could try an addon like this:
  https://addons.Mozilla.org/firefox/addon/tab-groups-button/