Right aligned and then centered in the cell of the table - indesign cs 5

Hi all

Does anyone know how can I get the numbers right aligned, so the zeros are all below the other. And then the center of the table cell.

I use a paragraph style is aligned to the right. This is the paragraph defining the cell style.

Any help would be appreciated.

Thank you

Mau

InDesign CS5

You can set the position of the tab within the paragraph style, so no, you do not need to edit each cell, but you do not have to use the text aligned to the left, and if you want that all the place line numbers correctly you need to use a font with tabular, rather than numbers proportional to make them all the same width (and for tables rather than oldstyle figures is probably also a better choice).

When you look at the tabs formatting options that you have left, right, centered and aligned decimals (which can be any character of your choice, but you want the period). When you use the decimal tab aligned, everything you type will behave as if the tab is a tab that is aligned to the right - it will start at the position of the tab and move to the left with each additional character - until you type the character that you chose for the alignment. From there text will move to the right of the alignment. This aims to make things like the columns of numbers with decimals.

In a table, the tab character is implied, so if the only thing in the cell is your setting of the tab in the style number is sufficient and it will work just as soon as you start typing. If there is other text before alignment numbers that must be the left hard, however, you will need to type, then manually insert a tab in the menu Insert special characters (or create a new shortcut key to insert tabs in tables) to force the text to the left margin and keep the numbers aligned on the decimal point. You can't just hit tab within a cell to add the tab - it reports ID to pass to the next cell.

Tags: InDesign

Similar Questions

  • Menu Start menu Office made its appearance by taking the arrow of the mouse on the right corner and then click on, but I want to start menu

    In my office start menu makes its appearance using the arrow of the mouse on the right corner and then click on, but I want to start menu tile as the photo above... How to do that in my HP All in one touch pc with windows 8 loads

    * Original title: about start menu

    To get the above method, you must install the Windows 8.1 with the fall update #1.  So, it looks that you just need to open the Windows Update settings and updates.

  • How to align an image centered in the advanced table column.

    Dear friends,

    I developed a page of the OAF with an image column in the advanced table, but by default the image column is not centered,
    How to make image centered in the advanced table column, please let me know your suggestions.


    Thank you
    Keerthi.K

    HAD,

    In your column, create a tabular presentation and a rowlayout and the image, and then put in the rowlayout. Set the horizontal alignment of the rowlayout inwards.

    Kristofer Cruz

  • I imported the pic from my camera to my images. When I go into my photos and do turn and then try saving the picture, it says "you cannot rotate this image.

    original title: read only the settings on my photos

    I imported the photos from my camera to my computer and saved in a folder in my pictures.  When I go into my photos and do turn and then try saving the picture, it says "you cannot rotate this image.  The file may be used or open in another program or file or folder can be set to read only. "I have tried many and repeatedly edit the files and folders to uncheck Read-only, but it keeps changing its property back to read-only.  I also know that the file is not open or in use anywhere on my computer.  There must be something wrong with the parameters of only reading, but I have no idea how to do to figure it out, I tried several times to change.

    Any help would be great!

    Thank you!!

    Okay, it looks like that your camera records the files in write protected files.
    1. There should be settings on your cam to stop recording pictures like "non-indexed.
    2. but right now, try this:

    Right click on image > click Properties > click on advanced > check / uncheck the ' Index
    This file / folder...' option (should be the second option)
    Click OK > click on apply.
    and you'll see it disappear / appear

    You can do this for all the photos (hold down the ctrl key while selecting to choose several files at once)
    Eddie B.

  • How can I copy the folder my documents in my iCloud drive and then I sync the two after that?

    How can I copy the folder my documents in my iCloud drive and then I sync the two after that?

    You can simply drag in iCloud reader, but I pass and move documents in their files app instead. It will probably take a while to download all documents.

    It is not a way to sync without some third party software that synchronizes folders, or learn how to use rsync in the Terminal.

    Instead of synchronization, simply use the iCloud drive in the 'Documents' folder after you move the files.

  • Why my internet stops now and then not all the time trying to upload links to pdf files

    I wonder if there is a problem with my computer or if I need to install a program? My internet stops now and then not all the time trying to upload links to pdf files.

    Hello

    1. what browser do you use?

    2. have you done any hardware changes or software on your computer before this problem?

    3. you receive an error message when internet no longer works?

    4. what exactly you mean by pdf files download links?

    If you use Internet Explorer, you can follow this link:

    Tips for solving problems when Internet Explorer hangs or stops working

    Reference: Cannot display PDFS on the web

    Display PDF files in Internet Explorer, AOL | Acrobat 3D, Acrobat Reader 7 7

    Hope the helps of information.

  • I was on YouTube with my helmet and then I unplugged the and plugged them back and now I don't got no noise at all.

    I was online on you tube with my headphones and then I unplugged the and plugged them back and now I had no noise at all, what can I do? I checked the audio Manager and it seems fine.

    Hello

    (1) you use Internet Explorer or another browser to go online?

    (2) this happens on all websites and pages?

    (3) other sounds work fine on the computer?

    (4) may I know the operating system you are using?

    (5) were there any changes before the show?

    I suggest you to follow the steps mentioned below and check if it helps.

    Method 1: No sound in Windows.

    http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

    Method 2:

    Check the playback settings to see if the device is turned off / disconnected.

    Method 3: If you are using Internet Explorer, check if this option is enabled.

    a. Click Start, type "inetcpl.cpl" and press to enter.

    b. click on the Advanced tab.

    c. scroll down to see the multimedia section and make sure that "play sounds in Web pages" option is selected.

    d. click ok to apply the changes and see if the problem still occurs.

    Restart Internet Explorer and check if you can hear the noise.

    You can also try to update flash player on your computer and check if the problem is resolved.

    For more information, see the link:

    http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

    I hope the information is useful!

  • When I download a WMV file on a website and then play through the Player Windows Media, I get the audio but the video is just a green screen Uni.

    When I download a wmv on an internet site and then play through the Player Windows Media, I get the audio but the video is just a green screen Uni.  I was told that the media player can miss a card.

    Hello

    1. what operating system is installed on the computer?
    2. are you able to play videos other than video .wmv successfully?
    3. don't you make changes to the computer before the show?

    Method 1
    I suggest you to check if the hardware acceleration of the display device setting is too high.
    a. Click Start, click Run, type desk.cpl and then click OK.

    b. click on the settings tab and then click Advanced.

    c. click the Troubleshooting tab, and then move the hardware acceleration to none.

    d. click on apply and then click OK twice.

    e. If the problem is resolved after you move the slider hardware acceleration to none, contact the manufacturer of the graphics adapter driver to determine if there is an update that resolves this specific problem.

    Method 2
    The required codec is missing or damaged. If the problem occurs when you use a .wmv file, download or reinstall the latest version of Windows Media Player. If you use an earlier version of Windows Media Player, upgrade to the current version of Windows Media Player for your operating system.
    http://Windows.Microsoft.com/en-us/Windows/downloads/Windows-Media-Player

    If the problem occurs when you use a different format of video file, for example a .mpeg file or an .avi file, download or reinstall the appropriate third-party codec.

    Codecs: Frequently asked questions
    http://Windows.Microsoft.com/en-us/Windows7/codecs-frequently-asked-questions

    Note: With the help of third-party software or a link, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third party software or link can be resolved. Using third-party software or a link is at your own risk.

  • Found that this problem was due to windows being disabled "Wireless Zero Configuration" service. Found this automatic setting and then by installing the software corrected the problem.

    How to get through this process of changing windows 'Wireless Zero Configuration' service is disabled.  Found this automatic setting and then by installing the software corrected the problem.

    Hi Joseph,.

    1 are you always face the question or the issue are already fixed?

    2 Windows operating system you are using?

    If you still experience the problem, you can follow this link completely and check if the problem persists.

    In the Windows wireless network connection problems

    You can also read the following article and check.

    How can I disable wireless configuration and enable Windows XP Wireless Auto Configuration services

  • I allowed to install Shockwave Flash in my computer this morning, and then malfunction of the application.

    1. I allowed to install Shockwave Flash in my computer this morning, and then malfunction of the application.  However, I reset my computer and connected only on yahoo.com but I couldn't sign in to other sites like google, wellsfargo and.  I tried to disable this add-on 'Shockwave Flash' managing by module.  Help, please.  Thank you.
    2. Remember - this is a public forum so never post private information such as numbers of mail or telephone!

    Ideas:

    • You have problems with programs
    • Error messages
    • Recent changes to your computer
    • What you have already tried to solve the problem

    Shockwave Flash should not do that. However, if you want to delete it go to programs and features in Control Panel. Click once on Adobe Shockwave Player and click on uninstall in the menu at the top. I suggest you do a comprehensive analysis here, a free service offered by Microsoft. http://OneCare.live.com/site/en-us/Center/whatsnew.htm

  • Please tell US if there is a way I can recover a FILE that was accidentally deleted from the Recycle Bin. and then "emptied" from the bin.

    Please tell US if there is a way I can recover a file that was accidentally deleted from the Recycle Bin. and then "emptied" from the bin.

    If it was very recent, this tool would have a good shot at it.
     
     
  • Reinstall vista again HARD drive now PC don't can not boot from the DVD drive I can copy vista external hard disk drive, and then install on the laptop

    Duplicate info wire - running kill disk, vista disappeared and my laptop does not see my dvd/cd drive and I can't reinstall vista OS because of this problem

    Have to reinstall vista on a new HARD drive now PC can not boot from the DVD drive I can copy vista external hard disk drive, and then install on the laptop?

    The DVD player worked before HARD drive went bad now, it won't work.

    And I just replaced the HARD drive, but now cannot load an operating system that he...

    Help, please...

    Hi dynamitenews

     

    1. are you able to boot to the desktop?
    2. what happens when you try to start the computer?

     

    You must have the DVD drive to start the computer using the disk, you cannot use the external hard drive to do the same thing.

    Also I suggest you to make sure you have defined the start as CD/DVD-Rom as the first choice option in the BIOS. See below the help link-
    http://Windows.Microsoft.com/en-us/Windows7/BIOS-frequently-asked-questions

    If nothing is done, then you can contact the manufacturer support for assistance on setting up the correct boot sequence and check.

    BIOS WARNING-
    Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

     

    I hope this helps.

  • If I click on Favorites and then scroll through the list of favorites, it does not show the entries in each file.

    * Original title: to access Favorites

    If I click on Favorites and then scroll through the list of favorites, it does not show the entries in each file but suddenly close showing the list of favorites. . I use Chrome and it happened all of a sudden. It was functional this morning. All the advice to fix this will be greatly appreciated

    Have you tried the Chrome forum? https://productforums.google.com/forum/#! forum/chrome

  • When XP is "windows xp for first use mode setting" it loads to 99% and then I get the message "unable to complete Setup.

    I upgraded my 64 new image computer windows 7 Home premium Edition to windows 7 using the upgrade anytime professionoal.  I downloaded the fix for quad core to use virtual pc and windows xp mode.  When XP is "windows xp for first use mode setting" it loads to 99% and then I get the message "unable to complete Setup.  I service request # 1182160056 but the phone lines of microsoft do not work.  Any suggestions?

    Have its possible that this is a download corrupted Windows XP mode, you tried to download it again and see if it works? Also, make sure that you first install Windows Virtual PC.

    Click Start, type: enable or disable windows features

    Press enter on your keyboard

    Scroll down and make sure that Windows Virtual PC is checked.

    Click OK

    Restart if prompted.

    http://www.notebooks.com/2009/11/23/using-Windows-Virtual-PC-with-Windows-XP-mode/

  • I accidentally deleted all my Inbox and then deleted from the Recycle Bin. I need to see if someone can help me to restore it.

    * Original title: tjbturner/remove

    Hi,

    I accidentally deleted all my Inbox and then deleted from the Recycle Bin. I need to see if someone can help me seek and find these files so that I can restore. I looked everywhere to see if they are there, I can't find the.

    HELP PLEASE!

    tjbturner

    (Moved to repair and recovery)

    Unless you do the backup that Microsoft has offered when you have joined the electronic address data are gone because, like you, the online servers are not backed up

Maybe you are looking for

  • no caller ID on a second incoming call on IPhone 6

    If I talk to someone, and someone else tries to call, I get a sound notification of this second appeal, but NO caller ID. Sometimes I do not even an option to swtich to the second call. Or, I have to let him keep a sound signal, or cling to the origi

  • 17 Firfox off my Java and I was told to update Java 7 update 9 - now it does not ("the plugin is disabled")

    When I go to the Java test page (http://java.com/en/download/testjava.jsp), it says that the Plugin is disabled. Page manage add-ons said he was disabled after a reboot, but is now activated. Chrome and IE both agree that I have Java 7 update 9 insta

  • don't automatically load pages

    I use Chrome for 12 FF (got tired of him constantly crashing); now try 16.seems pretty stable BUT... with Chrome, I had set it up as default browser, a shortcut in the start menu and ready to open 5 tabs at startup (it loads while I go outside to hav

  • Battery not charging on Satellite Pro L300D

    I've had this laptop about four months and had just returned a repair under warranty (replacement of the motherboard). He had light use since I bought it. On his return, I ran a Windows 7 upgrade as installation clean but noticed that the battery cha

  • DVD Z1

    I recently purched a refirbished Z1 HP w/W7 work, which is a great PC.  The only problem I encountered is that the DVD drive is not recognized.  She will suck in a disc in but it's like he goes. It does not appear in the Device Manager either.  Thank