Rimozione host da cluster con not available vCenter

Similar Questions

• I get an error, "Microsoft Hosted network is not available" when I try to connect wifi for my HTC desire V through the laptop.

  I use dell xps 15 laptop in which I use Wired internet.
  I want to use my computer laptop wi - fi as a hotspot to use internet on my HTC Desire V for this I'm using connectify software but when I start HotSpot Wi - FI Access Point Encrypted (WPA2) method of sharing is for me the hosted Microsoft network is not available.

  Original title: Microsoft Hosted network is not available

  I had the same problem and that's what I did on my PC Win7:

  (Forgive me if my English is not good)

  1. verification of my network hosted in my driver. I have run the administrator command prompt and type netsh wlan start hostednetwork

  If you get this message:

  The hosted network could not be started. The group or resource is not in the correct state to perform the requested operation.

  
  

  Then you have the same problem with me. It is the next step.

  2. check my driver. Type of command line: netsh wlan show pilot

  Then I saw that my support pilot hosted network. If your driver does not support hosted network, I suggest update you your driver or reinstall it.

  How FND out your driver and update: Start - Control Panel - system and safety - device (under System) Manager - ECS

  
  

  3. If your drivers support hosted network but still will not start, then the problem could be that you do not have Microsoft Virtual WiFi Miniport Adapter (the same problem happened to me). You can search and download. I tried and installed the new card.

  Now I have Microsoft Virtual WiFi Miniport Adapter under network cards, in Device Manager.

  4. I tried step 1 and it worked! So I can run my Connectify and this error message never showed even once.

  I hope this works for you also.

  Good luck

• Not available to add to Distributed vSwitch to hosts/physical adapters

  It's probably something simple, I forgot, but have not been able to understand...

  Learning of vSphere 5.5 via Virtualization VM Workstation 9. Have many functional things already, to the point where I now both hosts ESXi, datastore iSCSI via standard vSwitches etc. No cluster, but everything works as expected.

  Currently distributed vSwitches research. I am trying to create one, but facing the question that I see not available to add to the hosts/physical adapters dvSwitch... Nothing appears in the list, nor does anything appear under "View Incompatible Hosts", so I can only continue when I choose "add hosts later." It is through vCenter Client and/or vCenter Web Client connected to the server vCenter.

  The two hosts of ESXi have 5 network cards. They have all been used in vSwitches for VMS, the iSCSI management..., so I decided to add an additional NETWORK card for each. I rebooted, ESXi, each of them guests show their new unused NIC under Configuration > network cards... This don't change nothing, always do not appear when you add hosts to the dvSwitch. I also tried to put in a standard vSwitch first on each ESXi host, with no difference. So I thought that maybe you can't see adapters hosts/physics to add to a dvSwitch after that that they have been added to a cluster, so I quickly created a cluster, added two ESXi hosts, no difference. I changed the version of the dvSwitch to 4, 5.5... I tried different settings to maximum number of physical cards by the host from 1 to 8... Nothing helps.

  I hope that I have reason to believe that you can add network individual cards of the hosts who also already have some network cards as used in standard vSwitches uplink adapters?

  Any comments appreciated,

  JH

  -

  Haha... It is even stupider than I thought.

  In order to tackle another question I got one a few days ago, I created a data center extra, with a very similar name. I moved all hosts of this new centre of data at any given time. But when I tried to create the distributed vSwitch, I accidentlly rightclicked the OLD Datacenter (empty). No host there to select a list empty... so of COURSE every time.

  Can someone slap me hard, please?

  JH

• How to remove hosts in cluster without vCenter

  Hello
  a customer has a vSphere 5.0 U1 cluster with 2 host ESXi 5.0 U1.
  
  The vCenter VM is corrupt and there is no way to restore ( )no available backup ).
  Now I installed a new vCenter, how do I remove the old cluster hosts?
  

  
  

  Thank you
  Andrea

  Hello

  If vCenter is offline, I'll try to add hosts to the new vCenter. I'm sure it will connect.

• Host is not available for verification of compliance

  Hello

  I am trying to apply profiles to host with our new vCenter environment but get the error below:

  Failure against host profile

  Host is not available for verification of compliance

  The State of the answer file also shows as being incomplete.

  Any help will be appreciated.

  Chris

  If it turns out you need to use the Web Client.

• I use a computer laptop xps 15 in which I want to use my computer laptop wi - fi as a bt hotspot it gives me error that Microsoft hosted network is not available

  Dell xps 15 laptop with windows 7 Home premium 64-bit
  processor Intel core i5 2.30 GHz

  Hello tejashande,

  Thank you for the question!

  It is disheartening to know that have problems you with the computer laptop wi - fi. As I understand it, you get an error that Microsoft hosted network is not available when you use the computer laptop wi - fi as a hotspot.

  I need to ask you some questions to help you best.

  1. What is the exact error message related to networks hosted?

  2. is it works much earlier?

  Download and install the Wireless driver from the link below and check.

  http://en.community.Dell.com/TechCenter/enterprise-client/w/wiki/3854.XPS-15-l521x-Windows-7-driver-cab.aspx

  Answer to us if you are having problems with a Wi - fi connection or any other issue of Windows, and I'd be happy to help you again and try to correct the problem as soon as possible.

  Good day!

  Hope this information helps.

• Microsoft Hosted network is not available (CF00100E)

  Whenever I try to start a network hosted, I get an error message like "Microsoft Hosted network is not available". Any problem with my network card. I am currently working on Windows 8 operating system. Is it possible to solve?

  Hi Rithu,

  Try these steps and check:

  a. press the Windows key + R , type Devmgmt.msc to open Device Manager.

  b. click view and press on ' see the hidden devices.

  c. go down the list of devices and expand the "network devices".

  d. find an adapter with the name "Microsoft Hosted virtual network card" and then right-click on it.

  e. Select activate

  f. This will allow the AdHoc created the connection, it must appear in the network connections in the network and sharing Center, if the connection to the ad hoc network does not appear then open the elevated command prompt and apply this command "netsh wlan stop hostednetwork" without the quotes.

  g. after that, the connection should be displayed.

• service on this host of hardware control is not answered or is not available

  Pessoal,

  tenho um servidor ESXi 5.0 e reiniciar o host wanted.

  ELE renew funcionandonormalmente, aba of na very esta aparecendo a mensagem, condition of the equipment:

  "Service on this host of hardware control is not answered or not available.

  O program resolution posso fazer para este problema?

  Bem Vindo,

  Chegou a testar clicando no reset e sensor to date?

  TestOU o Serviço reiniciar also host VMware?

  Para reiniciar o Serviço host vmawre host via ssh acesse o e digite services.sh reboot

  ABCs

• Since update 6.2 (from 6.0) receives not the vcenter data

  Hello

  I've recently updated our device because these articles vRealize: How to Patch or upgrade VMware VRealize Operations Manager (vROps). Settlersoman - a colon in the world SDDC. and upgrade vRealize operations - this virtual boy.

  When following the instructions that I was faced with the question of the version to download with windows based remote collectors or without. after consulting with the Forum (device update vrops - what should I do about remote collectors?) I finished the upgrade with:

  Operations Manager - Virtual Appliance Operating System upgrade - vRealize vRealize_Operations_Manager-GO-OS - 6.2.0.3542056.pak

  vRealize Operations Manager - Virtual Appliance (without Windows basic RC) update - vRealize_Operations_Manager - VA - 6.2.0.3528954.pak

  After the upgrade, we noticed that vrops has not received updates of our vcenter Server (version 6.0.0 3339083 installed on windows server), graphics, badges, and measures either are not available, with the old values or just empty

  :

  I confess that I don't understand that it's on vrops. I mainly use dashboards here and there to resolve different errors, but I started searching and received at the administration screen > management cluster and him, it seems that vrops lost the connection with our vcenter:

  

  I took a snapshot before the upgrade, but I was told it may not work because the upgrade will update the database as well.

  What should I do?

  My recommendation:

  Open a SR on VMware support. May be necessary to adjust it on the postgres database.

  Thank you

• Active EVC cluster will not allow guests to reach...

  Recently, I installed a new vCenter Server 5 (vCenter 4.x running on a 32 bit OS then upgrade was not an option-fresh install)

  I had 1 main cluster in the datacenter with HA and active CVS. All 10 guests were very well in it.

  However, when the new vCenter Server has been up - and after having removed the old vCenter data center, when I went to add the host to the cluster (same as before active EVC mode) 6 guests joined very well, while the other 4 could not.

  Everyone knows this? Just a reminder:

  new vCenter Server 5

  all 10 guests were in an EVC cluster well

  4 of 10 guests will not join the same cluster...

  Thoughts?

  Hi xxx,.

  XXX wrote:

  Another question regarding VCA - if I point the old vCenter DB, the new vCenter server will this cause problems because a new database created for the new vCenter? How should I approach the issue?

  You can't do it now, you can not connect vCenter 5 dB in the version of vCenter 4, different schema, tables etc. as I said in my previuos reviews, you must migrate to vSphere with DB 5

  1. Start vCenter old (I hope that you did not remove or disconenct any server from there, right?)

  If you do not make any changes to the OLD vCenter vCenter should be able to connect to the return ESXi hosts and apply all the settings (including the CTS)

  And Yes, I take off (unplug the old vCenter servers... so I guess that reconnect the old Server vCenter is not possible.)

  If you simply disconnected the old vcenter ESX hosts (not deleted) you should be able to connect to vCenter old with old settings, but as I said earlier, I don't know what will happed with a VCA base (because you creted clusters with different CVS on new vCenter.)

  Artur

• Networks not available in Org vDC

  Hello colleagues!

  Please help me - I have a problem with the networking in vCloud Director.

  When I try to specify grouping of network when creating organization vDC, it shows the empty box

  I created pool network before, but it is not available in this dialog box.

  Also I see some strange things: when I created provider VDC and pool network selected, it shows me all the available networks

  

  When I created the pool - he also showed me that this provider VDC has not all available networks

  So I try to create the network of the Organization, and even once it does show me all available pools

  However, when I uncheck the box, it shows me my stock of network and I managed to select. But when I go inside the Organization and try to create TIME here, I see no network available

  

  When I try to create the network here, it says me that "vDC for the VAPP doesn't have network resourses.

  And TIME does not start with error "associated with this paralytic vDC is not required network resourses.

  I have read in vCloud admin guide - "you can deselect use networks accessible only by the organization check box to display the outside networks and network pools which are not currently available from in the Organization through its organizing committees."

  But please give me any idea - why network pool cannot be available for the VCC org?

  What should I check first?

  (The connection of the VCD to vCenter and vShield manager was a success, VCD agent is properly installed on the host computer. Data store is visible).

  Thanks for any idea!

  First screenshot shows you have no network at all pool, either you have a pool of network, but it is not available for the selected provider VDC. For example, if you create a VIRTUAL LAN or network supported by VCDNI pool, then the vdSwitch for the pool of network must be accessible by the servers of the provider VDC you selected for org VDC.

  ekiselev wrote:

  Hello colleagues!

  Please help me - I have a problem with the networking in vCloud Director.

  When I try to specify grouping of network when creating organization vDC, it shows the empty box

• Update the host ESX 4.1 before upgrading vCenter 4.0 to 4.1

  Someone sees a problem updating my 4.1 ESX hosts and leaving in the former vCenter 4 Update 1 cluster?  I have rebuilt a new server vCenter 4.1 but can't stop the virtual machines and ESX hosts in maintenance until tomorrow night mode.  I want to put the ESX host in maintenance mode, both in the old server vCenter and 4.1 update and move remove/add new vCenter tomorrow night.

  You can't manage a host ESXi4.1 with nothing less than vCenter4.1.  If your plan will not work.  You must first upgrade vCenter.

  http://www.VMware.com/PDF/vSphere4/R40/vsp_compatibility_matrix.PDF

• Help - what is and what is not available in free version of ESXi 3.5 U4?  VIMA?  VI Toolkit?

  Hello

  I'll try to find a (web page perhaps) summary of what is and especially what is NOT available in free version of ESXi 3.5 Embedded U4.

  Like many people I guess, I spent hours looking for a way to perform certain operations on virtual disks, to see that these operations have been banned in the free version of ESXi 3.5 U4.  It is reasonable, after all, if someone gives you a horse, don't look in his mouth!  But while I'm happy to be an ESXi 'amateur' to a certain extent, I'm starting to feel like a pirate, and I'm doing this a bit more productive experience.  Here's what I found so far:

  -Some of the most useful features in VMware Tools (such as 'narrowing of the virtual disks') seem to have no useful effect in ESXi 3.5 U4 Embedded free version

  -L' operation-e vmkfstools.pl RCLI to rename the virtual disk (moving) and the i - operation to clone (copy / import / export) a virtual disk seem to be disabled (due to lack of return. RestrictedVersion.summary)

  -vim - cmd does not provide what be good beyond what you can do in VI Client

  In particular, can someone tell me if it is interesting to study the following, that is I'll be able to do anything discs at all useful to the virtual with them in ESXi 3.5 U4 Embedded free version:

  -VIMA

  -VI Toolkit (for Windows)

  Thanks for any help/pointers.

  Take a look at this article: http://vmetc.com/2009/03/31/esxi-u4-ends-free-version-read-and-write-access-from-the-rcli/, it should provide general information on the ESXi set and the problem of read-only.

  As ESXi never was intended to provide full access to the VI API, you get what you pay for and in this case, you use the free version so that you can accomplish all of these tasks with the VI Client, if you want more, you'll have to pay for it.

  So first off, vim-cmd is only available with the unsuppoted SSH console and you can probably do most of the basic tasks through some scripted as a shell script automation, also in the console Busybox unsupported, you have full access to the very familiar vmkfstools. Now, you mention vmkfstools.pl is the remote version of the tool, because it is not available by default with ESXi (as the console does not support is not supported by VMware). To manage and configure your remote host ESX and ESXi, vCLI was created that replicates most of the popular esxcfg-* commands that use the API of VI

  This VI API is not free, you have full read access but if you want to set up/perform all operations that aren't will not be played, then you will need to have a license appropriate and which is at the Foundation or higher. The API is exposed as WSDL/SOAP and there are various scripts/languages with links that hang in the VI API to provide a level of abstractions for programmers, administrators, some of these languages include Microsoft Powershell, Perl, c#, Java, etc.

  PowerCLI (officially VI Toolkit Windows) is such a link that uses the VI API, i.e. to use it you will need to have the appropriate permit to change the configuration of other you will have only read access, it's similar to Perl called vSphere SDK for Perl bindings. So, if you're going to explore other routes, you will always encounter the same fundamental question.

  Okay, vMA (officially VIMA) is just a VAPP VMware RHEL that provides administrators a way to centrally manage / to distance your servers ESX/ESXi and vCenter. It comes by default with the vSphere THAT SDK Perl and a few other utilities to help manage/configure your systems and once again they depend on the VI API which access set based on the licenses that you have on your hosts.

  So all the options are options, but you need to know if you are going to get a license, because without the most basic, you will not be able to use one of these toolkits. Note that the license NOT only does full read/write access to the API but other features depending on the license you buy.

  There are other tools that provides VMware which, for now, temporarily has functions of management for virtual machines ONLY, this may change in the near future but take a look at this thread for more information post: is not happy with lockdown 3.5u4 VI API/RCLI ESXi? Worry not, VMware VIX to the rescue... for now =)

  I hope that this clears up everything.

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  repository scripts vGhetto

  VMware Code Central - Scripts/code samples for developers and administrators

  http://Twitter.com/lamw

  If you find this information useful, please give points to "correct" or "useful".

• VSphere HA Cluster failure when downing VCenter Server

  Today, I took my VCenter server for maintenance. A few moments later, my node 2 VSphere HA Cluster is gone offline as well as all the guests running. When I brought the server VCenter upward, both hosts HA had to reinstall put it then HA Agent on the guest virtual machines.

  In newspapers, I saw this entry for each host. For the host XYZ.domain.com invited running example 1 and example 2:

  XYZ.domain.com host (data center) does not

  example 1 on host XYZ.domain.com (data center) is disconnected

  Example2 on host XYZ.domain.com (data center) is disconnected

  The other cluster node has a similar registry, where he himself is unresponsive and all virtual machines running on this issue say that they are disconnected.

  Any ideas why this would happen?

  Where is placed your DNS?

  ---

  VMware vExpert 2009

  http://blog.vadmin.ru

• Network accounts are not available

  Hello

  I work in a corporate environment that is mainly based on Windows, but also have a handful of Macs and a Mac server. The question I have is that the MacBook display the prompt "network accounts are not available" when connecting. This message disappears when the VLAN from requiring authentication on our firewall device, MACs are to be excluded.

  I thought my our support company firewall that Macs are a kind of test at startup. If they do not have full access to internet NETWORK card wireless goes into a State of semi functioning. It is only when they have access to the internet it goes into a fully operational.

  It makes sense when the "network accounts are unavailable" message, I can't SSH in the Mac, but can't ping the IP addresses of our DC, ping any name FULL domain or ping any device outside the VIRTUAL LAN. Does exactly the same as this -after-reboot-no-route-to-host http://apple.stackexchange.com/questions/231290/mac-unable-to-login-network-user

  Our company firewall just remember exactly what service performs this function on the Mac. Anyone know what it's called?

  Kind regards

  Peter

  Any help here...

  http://osxdaily.com/2007/01/22/what-happens-in-the-Mac-OS-x-boot-process/

  During his execution, rc.boot and the other rc source of scripts /etc/rc.common , a shellscript that contains utility functions, such as CheckForNetwork() (check if the network is in place), GetPID() , purgedir() (Directory deletes the content only, not the structure), etc.

  • rc.bootfigures on the startup type (Multi-User, Safe, CD-ROM, network etc.). In the case of a network boot (the sysctl variable kern.netboot has the value 1 in this case), it works /etc/rc.netboot with a start argument.

  /etc/rc.netbootmanages all aspects of the network boot. For example, it runs the network and (as applicable) supports the. It also calls /usr/bin/nbst to associate a file of the shadow in the image of disk used as a root device. The idea is to redirect the entries in the file of the shadow, which hopefully is local storage.

  • rc.bootnumbers if a file system consistency check is necessary. Boots single user and CD-ROM does not run fsck. SafeBoot is still running fsck. rc.bootmanages fsck and return status.
  • If rc.boot has finished successfully./etc/rc

  http://Hayne.NET/MacDev/notes/boot_sequence.html