Similar Questions

• lost all my sounds ringtones and notifications stocks on xperia z2

  How can I get my stock sounds ringtones and notifications of back? Because I lost them that I can't change my sound notification, it's really bugging me now and I don't want to factory reset my z2! Can someone help pleas?

  Settings-apps-all-tap reset app preferences and settings (3 points). This will allow you to choose other ringtones.

  But how have you lost them?

• How can I make audio files on my SD card appear on the list of ringtones and notifications?

  Hi all

  I've had my Moto Droid for a few weeks now and am loving every minute!  It's a little heavy, but the thing is as strong as a brick with the right case and screen protector.

  My problem is that I read a previous posting on this forum that says to create folders on the SD card that is called:

  sounds

  Media

  ringtonesnotificationsalarms

  It was supposed to go to the Android OS to recognize some sound files that I put in the files and let me use them as ringtones, notifications, and alarms.  Once I disassembled the Droid to my computer and removed it once again on the phone, I checked the list of ringtones and none of them were there (which had no alarms or notifications).  I even rebooted the unit and that they were not yet available from the SD card.

  Any suggestions?  Note that I missed?

  I just wanted to be clear.  The DCIM folder is located in the root directory and you want the media to be in the directory folder root and not in the DCIM folder.

• Cannot turn off the vibration on the ringtone and Notifications

  Hello!

  I have search on all the menus that has XT1542 and I found no article that I can change something to completely disable the vibrations of the smartphone.

  Why do I need it? Because:

  A-I have the phone to view and I want a low buzzing sound rather a table vibrant and made big noise on a silent office.

  B when I leave the phone, I'd rather listen to ringtone rather trying to hear the hum in clothes. It is almost impossible to detect if the softer clothes have my phone.

  Completely disable the notifications and ringtones is not an option. I want to hear notifications but not 'feel' them.

  Thanks for any response.

  It's there, it's just hard to find. Settings-> account settings (press the name)-> notifications - his choice and toggle the vibrate

• Ringtones and Notification sounds how do I grow GB 2.3.4 as a Blackberry smart phone?

  I have a 8 GB SD card that was in my Blackberry 9700 and was loaded with ringtones, all kinds of Notification sounds and special EFX sounds. Of course, I used the same SD card when I bought the Atrix. After the Gingerbread update, while I was exploring Google Talk + Video, I discovered that all the sounds and ringtones are available and working in this program.

  I guess the question is why are they available and not only this way in Google Talk + Video programs, email, text, Applications in a similar way. Is it a process of gingerbread, or the individual application.

  What should I do to be able to choose tones or special alerts for different emails, text ect and ensure their proper functioning in the same way as on a Blackberry smartphone? Is it possible at this time? any recommendations?

  My guess is that some applications index all the media themselves, while the Basic apps that are part of the operating system, that are looking only in specific places.

  Each application (email, messages, contacts) has a menu of... separate notifications so if you are in text messages, you go to the menu button, settings and you can find the options there to change the sounds.

• BlackBerry Smartphones Ringtones and the Notification Options for SMS text phone

  I can't locate the profile of notification area (by following the instructions in the guide) on my "BOLD" to change the ringtone for phone and notification options for calls and texts in and out of the Holster.  I go to application Options, but there is no section for phone or SMS texts and not even in the Advanced Options section.  I remember correctly, I was able to make these changes in the application of profiles under subsection advanced... but not on the "BOLD". In addition, I somehow deleted my phone icon application when I hide and rearrange my icons.  Any advice would be greatly appreciated.

  Go to the menu, profiles, scroll to the tip, press on in normal conditions (or which one is active), and you have the chance to change ringtones for phone, sms text, email and more.

  For the phone icon, switch between topics (menu, options, themes and switch to another and do the same to the ones you use) and check if you have the item on the screen, (you don't need the phone icon, press the green button and is exactly the same function)

• Lost Pack of ringtones and alarms Experia

  Once upon a time, my Z3 was a strong pack with a selection of ringtones and alarms to the choice. Now, it is no more and I don't know how to get it back.
  Uncle google is not useful...

  Hello and welcome to the community!

  If you do not see the ringtones pre-installed, it might be that you have selected the wrong app to choose the ringtone with.

  Go to settings--> Apps--> [menu]-> preferences app Reset and then go to settings-> Sound & notification-> phone ringtone and select the "sound selector" app and see if that helps.

• Is it possible to use other ringtones for notification?

  I was able to download ringtones and they work on the phone, but is anyway to do this with notification ringtones?  Basically, I despise the ringtones of notification which came with the phone and want to use others.

  Yes, there is.  Just enter the keywords "notification ringtones" in the area of research at the top of the forum page and you will get a list of threads that were previously discussed.

• having an iphone 6.  The ringtone does not make a noise.   I tested the ringtone and it sounds however when I receive a call or text or email, the Bell is silent

  I have an iphone 6.  The ringtone does not make a noise.   I tested the ringtone and it sounds however when I receive a call or text or email, the Bell is silent

  Hello Jimmy10 66,

  Thank you for reaching out to the Community Support from Apple. I know how it is important to follow your alerts, and I want to help you get your work again.

  Before we get too far, it's always a good idea to check that your 'secret' button just above your volume controls is not engaged. If you see that the yellow indicator go ahead and switch to the other position to turn it off.

  Alternatively, you can drag up from the bottom of the screen and make sure that the control of "do not disturb" is disabled.

  If those who are for the time off, go ahead and restart your phone and retest alerts. If the behaviour continues or if you encounter any problems, please reach out again and let the community know what other steps you have tried. The entire community is here to help.

  Best regards

• Can't click submenus and notification calls in Exchange for Mircosoft while using Firefox.

  When I access Microsoft Exchange web app of Firefox I have is no longer click pop up secondary menus and notifications I could prior use.

  For example, when I go to empty my deleted items folder and select empty file, I get this notification (menu 1) that I can't do now, click. All I can do is simply press 'enter' to close menus without actually doing a yes/no entry.

  Similarly, when I go to move folders and get the context menu (menu 2), I can't make any selection, and the 'enter' to close the method does not work. All I can do is then close the page.

  I tried to disable the blocker for firefox but that did not fix the problem. I can still use the submenus in other web browsers, so it is a problem that is specific to firefox.

  Any help to identify the cause and remedy this would be greatly appreciated.

  OdysseyHome said

  I tried using SafeMode first, and the feature completely restored

  It could be the work of one of your modules.
  Type of topic: addons< enter > in the address bar to open your add-ons Manager.
  Access key; < Control >(Mac: < command >)< shift > has)

  In the Manager of Add-ons, on the left, select Extensions.
  Disable some add-ons, then restart Firefox.

  Some added addons toolbar and anti-virus are known to cause
  Firefox issues. Disable all of them.

  If the problem persists, disable some more (restarting FF). Continue until the
  the problem disappeared. After, you know which group is the origin of the problem.
  Reactivate the last group ONE AT A TIME (reboot FF) until the problem reports.

  Once you think you have found the issue, that disable and reactivate all the
  others, then restart. Let us know who the suspect is detective.

• Ringtone and gamemusic only on the blutooth/headphones-device

  Hi you all out there.

  My iPhone 5 (most recent iOS) is not connected to any external device via bluetooth, etc., no headphones plugged.

  So there is no ring tone for incoming calls (vibrant works), game-apps have no sound. Dictation voice-messages does not work, the curve which shows the recognition of the frequencies is flat. But the music from the music app is normally played on the loudspreaker!

  But when I connect it to a speaker of the blutooth with a microphone, I hear the ringtone and game-music and saving messages of speech also works via the blutooth device. The same thing when the headphones are connected.

  Mode normal iPhone always think, it is connected to another Bluetooth device or something else and it's use for some acoustic out - and input - if it is not connected.

  I rebooted several times, flightmode turned on and off, ignored or deleted all bluetooth devices, he has experienced so far (only 2), opened the only application, which allows to redirect the output to devices outside and clicked on "iPhone" or "speaker" as the device to use - nothing helped so far...

  Any other ideas?

  Thanks in advance!

  Michael

  Look at the switch at the top left of the phone. Make sure you stop sounds. If you see orange in this turnout, reverse the reverse effect.

• Xperia compact Z5 - app, welcome and Notification bar buttons awol.

  Title pretty much everything said.
  The phone ran out of power a few hours earlier, put it on the change and when she came back (there is nothing unusual about any of this), for some reason, a number of parameters has changed a bit and I'm now no longer able to use the button of my house, the square button app, or swipe my notification bar down.
  -No recent updates
  -Certainly not a hardware problem (the buttons make the click and vibrate when you press on)
  -No access to a pc
  -Prefer not not factory reset

  In addition several system processes do not work. For example when I try to back up the phone, I get an error message saying that the backup has stopped.

  Cheers in advance,
  Hunter

  Sorry, you feel like that.
  I come to this conclusion after reading about the issue and found that a bug in update ota on all Android phones will be once every now and then, eventually throwing up this bug.
  The real solution is to open ADB and enter the following code:

  ADB shell am start com.google.android.setupwizard/ - n. SetupWizardTestActivity

  This will cause the phone go into Google setting mode that will bring back first of all the bar of tasks, and on reboot, the buttons.
  However, the buttons can disappear again if everything that caused corruption in the OSD user interface, happens again.
  This led me, as well as the did you have confirmed that it also happens in safe mode, to recommend without going through this solution and just rewriting software, eradicate the damaged file and its replacement by a new version through the repair installation.
  As you do not have access to a pc, you can copy an important files you need an SD card and then perform a factory reset, I know this isn't what you prefer, but long term will be the best solution for your problem.

  http://www.androidjunkies.com/how-to-fix-missing-soft-keys-and-notification-bar-after-Android-update...

  http://www.androidpolice.com/2014/08/07/how-to-fix-missing-home-and-recents-buttons-and-notification...

• my toolbar icon and notification of beginning has found its place on the right side. How do I move to the bottom of my screen?

  My husband touched something and my usual position for the start icon and notification bar went to another location.  I want to the bottom of the screen where it has always been.  I tried all the 'tools' that I could find, and the suggestion was to drag.  It does not work.  Help!

  Hello kenpam,

  You can 'unlock' before you drag.

  http://Windows.Microsoft.com/en-us/Windows-Vista/unlock-and-move-the-taskbar

  Unlock and move the taskbar

  Once you unlock the taskbar, it is ready to move to any horizontal or vertical office edge.

  Taskbar

  View all

  To unlock the taskbar

  • Right click on a space empty in the taskbar. If a check mark next to him doesn't lock the taskbar , the taskbar is locked. You can unlock it by clicking lock the taskbar, which removes the check mark.

    

    Note

    To lock the taskbar into place, right-click an empty space in the taskbar and then click lock the taskbar , so that the box is displayed.

  To move the taskbar

  • Click on an empty space on the taskbar, and then hold down the mouse button, dragging the taskbar to one of the four sides of the office. Once the taskbar where you want, release the mouse button.

• tuning rules and Notifications foglight 5.5.8

  Hello
  I'm new to Foglight. Currently, I have included in databases Oracle Foglight 5 of which 4 are in cars and a single stand alone on other instances of SQL Server side 8. Every day I get more than 10,000 alarms of critical alarms and warnings. I would like to make a paragraph tunning rules and Notifications only displayed important alerts. Is there any document for this?

  Report of the Assistant of alarms per day

  Thank you very much. Greetings

  David Sujar

  While some rules indicate bigger problems than others, all out-of-the-box rules have value. There is no list of rules which is recommended to be disabled or changed to make more effective warning system.

  If your environment is triggering alerts more you can process at the present time, the best advice I can offer is to turn off all rules that are not associated with alerts that you feel 'important '. Once you have addressed important issues, you can reactivate other rules so that you can improve the health of your databases. Please report if you have any questions about the specific alerts or rules.

  I also recommend that you post the Foglight communityfollow-up messages, as this vFoglight forum focuses on control of virtualization.

  Kind regards

  Brian Wheeldon

• notification area icons change to "Show icon and notification. »

  For some reason, the "Windows Task Manager" notification icon continues to change its behavior.  I had put the behavior "Show icon and notification" to the Manager of the tasks, but when I right click on the taskbar and select "Start Task Manager", I get the up arrow icon icon rather than the Task Manager.  I go to the arrow and click on customize and change the behavior to return to "Show icon and notification.

  Is there a reason why it keeps changing to "display only notifications?

  Hi Artoo,

  Thanks for posting your query in Microsoft Community.

  I understand from the description of the issue, your computer task manager notification icon continues to change.

  I appreciate if you could answer a few questions:

  1. What is the brand and model of your computer?

  2 have the Windows Task Manager before notification work?

  3. the question has started recently?

  The task manager has two different views. For the display that includes menus and tabs, double-click the border of the Task Manager window. To return to the view without menus and tabs, double-click anywhere in the border around the tabs.

  I suggest you follow this Microsoft article below which will help you to solve the problems of Task Manager, under article is also applicable to Windows 7:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Task-Manager-problems

  You can also see this Microsoft article for more information:

  http://Windows.Microsoft.com/en-in/Windows7/change-how-icons-appear-in-the-notification-area

  Let us know the status of the issue.