Ripple > device is too large

Similar Questions

• scanning - too large files!

  I have a HP OfficeJet J6480 All In One - when I scan a text of the document in PDF format, the file size is huge - a single page is at least 600Kb to 150 dpi - which makes for too large files to send, if you analyze 10 more pages. Is there a setting to change in order to reduce the file size while leaving the easily readable scan? Thank you

  If you use HP's Center version 10, download a version of the photosmart c6380 12 software. Advanced installation to select custom settings. Check the box for the imagery of function of the device and the HP Solution Center, and then uncheck the rest. Select the type of USB connection. in the lower left corner, you will see a box that says "If you cannot connect the device...". Plug the device later... ', check this box.

  MOD edit: also, here is a link to another post of Nickyton81 with installation instructions:

  http://h30434.www3.HP.com/PSG/board/message?board.ID=scan&message.ID=2307#M2307

  Message edited by Wendy on 27/04/2009 12:12

• Office extended; display does not display, image too large, not centered

  Hi, I know that it is apparently a matter of stupidity, stupid with a solution obvious but wait - I'm not a

  full retard. I already did all the utilities to change screen resolution and checked the settings

  for the "Display".  I've updated all the drivers, checked the compatibility, etc. Basically, I have tried everything I can think

  and yet my desktop image lying on my 37 '' Sceptre flat screen TV is not placed correctly / size right.  I can't

  See the entire desktop (as appearson the screen of my laptop).  The whole picture is fire too far to the right (in front of the tv),

  leaving an area 3' black on the side left which is unaccessable to my cursor.  Size of the window when on the internet is too large for

  access the menu items. The window is stretched too long in width and too short in length; content is not distorted.  One

  monitor only - once identified, the 1 appears on both screens. 1 is the primary monitor. Its driving me crazy - it's

  something I should have been able to take care of myself, but I give up. Any help would be appreciated a lot.

  Hi Ankhisis,

  ·         What is the brand and model of the computer?

  ·         Did you do changes on the computer before the show?

  Check the status of the display driver in Device Manager:

  a. click on Start

  b. in the run box, type in devmgmt.msc

  (c) in the Device Manager window

  d. expand graphic cards

  e. check if an error code is listed.

  Follow the methods below:

  Method 1: You can see the below mentioned article Microsoft Knowledge Base and check if the problem persists.

  Resources for troubleshooting problems in Windows XP

  http://support.Microsoft.com/kb/307960

  Method 2: You can also try to change the manual steps of resolution screen and check the results.

  To change your screen resolution

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/display_change_screen_resolution.mspx?mfr=true

  Let us know if it helps.

• When I open a tab/icon on my computer is much too large for my screen and I can't use my computer; 3 boxes in the upper right corner.

  When I open a tab/icon on my computer is much too large for my screen and I can't use my computer; 3 boxes at the top right corner with the-, square and X are too far to the right to do anything. How can I fit on my screen, so I can use my computer?

  Hello

  Please contact Microsoft Community.

  This problem is limited to any icon or it happens with all?

  Did you change to the computer?

  I suggest to refer to the following methods and check to see if it helps:

  Method 1:

  Install the latest display driver and check

  Uninstall the driver from Device Manager display.

  a. close all programs. This will ensure that the programs do not interfere with the update of the driver.
  b. right-click on my computer, and then click Properties. This will bring you from the System Properties menu.

  c. click Device Manager
  d. expand the display column of cards by clicking on them. This will show the graphical current map that is using your computer.
  e. right click on the adapter, then select Properties.
  f. click on the driver tab. This tab displays information about the current driver, as well as options to update, delete, uninstall, and back the driver.
  g. click on uninstall
  h. restart the computer

  You can install the latest display driver for download on the site of computer manufacturing, same driver will reinstall automatically after the restart, if the computer is connected to the Internet.

  Method 2:

  I suggest you try the system restore. Restore the system to a restore point when your computer was working fine

  System restore
  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  You can also check the Device Manager to see if the video card has a yellow exclamation on it with an error any:

  http://Windows.Microsoft.com/en-us/Windows7/products/features/device-management

  I hope this helps.

  Kind regards
  Anusha

• vSphere - KS.cfg: line31: virtualdisk size is too large for vmfs volume

  Can someone tell me what the problem with my script KS.cfg? It contains the following information, but I get an error stating "...". line 31: virtualdisk size is too large for vmfs volume (needed size 27176 MB > size available 26184MB)... »

  He complains, I increase the size of what he said and then, he complained again and again and again and again each time...

  • BEGINNING of KS.cfg *.

  AcceptEULA

  keyboard us

  AUTH - enablemd5 - enableshadow

  bootloader - location = mbr

  clearpart - overwritevmfs - firstdisk

  1. Uncomment the esxlocation line and comment out the clearpart

  2. and physical partitions to do a non-destructive reinstall.

  #esxlocation - uuid = 41cff7dd-4dd9-400D-a262-9ebb06565cc9

  install the cdrom

  rootpw - iscrypted bonnefin

  time zone "America/Vancouver".

  network - addvmportgroup = true - device = vmnic0 - bootproto = dhcp

  part "/ boot" - fstype = ext3 - size = 1100 - onfirstdisk - asprimary

  the part 'none' - fstype = vmkcore - size = 110 - onfirstdisk

  part "Storage1" - fstype = vmfs3 - size = 26184 - grow - onfirstdisk

  VirtualDisk "esxconsole" - size = 26176 - onvmfs = 'Storage1.

  part 'swap' - fstype = swap - size = 1600 - onvirtualdisk = "esxconsole" - asprimary

  the part "/ var/log" - fstype = ext3 - size = 4096 - onvirtualdisk = "esxconsole".

  part ' / var' - fstype = ext3 - size = 4096 - onvirtualdisk = "esxconsole".

  a part "/ home" - fstype = ext3 - size = 2048 - onvirtualdisk = "esxconsole".

  part ' / tmp' - fstype = ext3 - size = 2048 - onvirtualdisk = "esxconsole".

  part "/ opt" - fstype = ext3 - size = 2048 - onvirtualdisk = "esxconsole".

  part ' / ' - fstype = ext3 - size = 10240 - push - onvirtualdisk = "esxconsole" - asprimary

  % post - interpreter = bash

  • END of KS.cfg *.

  VMFS needed his own space for metadata, and you have not left a lot to her (26184-26176 = 8 MB).  You need a minimum of about 500 MB - is better around a gig or 2.

  -Matt

  VCP, vExpert, Unix Geek

• The request contains a URL that is too large

  When you click on a link, a new tab opens with this message. "The request contains a URL that is too large.

  Help!

  Well, I have accidentally solved the problem. Trying to open links incriminated, things seem to work. Thanks for your replies. If problem surfaces again once, I'll be back. Happy new year!

• 413 request Entity too large (history)

  I started having a sync error that won't go away. When I watched the news I've seen a lot of mistakes in the post. So the first thing I tried was to blow everything since I've been using the synchronization of the former. Then configure the new sync but I still had an error. Only this time, it was only a post failure and history was precisely the problem:

  1412870549016 Sync.Collection DEBUGGING POST length: 2152216
  1412870551015 Sync.Collection DEBUG mesg: POST fail 413 https://sync-141-us-west-2.sync.services.mozilla.com/1.5/10221627/storage/history
  MESSAGE from DEBUG Sync.Collection 1412870551015 413 https://sync-141-us-west-2.sync.services.mozilla.com/1.5/10221627/storage/history fail
  1412870551015 Sync.Engine.History DEBUG records Uploading failed:
  413 request entity too large

  If I disable the history then everything is fine and it syncs very well. But of course, now I can't synchronize my story. Any ideas on how to solve this problem? Am I stuck having to blow my story?

  Anyway... went ahead and blew the history cache. I guess it'll just keep going because the story gets too big and there is no real solution for this.

• The image file is too large

  Hi, I am trying to download a book on Smashwords. I made the pictures so small now that I CASN barely see them (2.5 cm). Yet, this short story 1 200 words and 39 works of graphic art is still too large to download in format Doc (the one acceptable to swords)

  I don't want to download a mac epub as it blows the content too. It never works with Smashwords requirements. (I made hundreds of changes and moving images in all directions no matter what)

  I tried to compress the file and there is Mo.9 difference - not enouch.

  I'm at 17.6 MB now, and I'm afraid this file will not work.

  Is there anything I can do to make a smaller file with works of art (for small children) working here? Thanks guys and girls. Much appreciated if you go by.

  To create this in what applications do you use?

  Some applications (including MS Word, Pages, but also others) store several revisions and changes in the main document. Sometimes it's helpful (makes it easy to retrace your steps), but it leads to the bloat of the document.

  There are two ways to reduce this. In Word, try to save as... to save a clean copy of the document (without any changes). In the Pages, use file-> advanced-> reduce the size of the file to do the same. Other applications may have similar options.

• All the text displays too large, Ctrl + 0 does not

  Enabled Firefox this afternoon to find all the text made too big by about 30%. Icons in the bookmarks bar and the tabs are too big, as well. If I press on Ctrl + - twice, then it seems normal, but Ctrl + 0 returned any abnormally high. Gmail in particular seems wrong no matter what I put the zoom, as if the user interface is too large, but the text is too small.

  I don't know what is happening. Several reboots of Firefox has not helped. Disabling each addon and plugin did not help.

  Can you use Ctrl ++ (zoom full page) to increase the size on Gmail? I'm sure that at least a few sites you will need to do this, depending on the size of pixel of your screen.

• When the scaling in the layout, 1st page prints correctly, but the following pages were not properly/too large for the paper, parts of text missing scale

  When you try to print in Firefox and when the scale to the size of the page in the page layout, the first page prints correctly, but the following pages do not scale correctly and are too large for the paper, with the parts of the text are cut off at top and right. It is not fixed by checking or unchecking the scaling / shrink to fit page width "ignore" in the print window, or by changing the scale percent.

  I am running Firefox 15.0.1, on Mac OS 10.5.8.

  The same problem happens in preview print and if I save the copy in a .pdf file

  I tried all the fixes in the how to and others in various forums with no improvement.

  This happens everytime I try to print a document from scaling upwards or downwards in Firefox.

  I note the bug has been fixed and should in Firefox 21 right now, it will mean the use night http://nightly.mozilla.org/

• Options to change the display screen size are too large or too small.

  How can I change the display size to one I am comfortable with that? The options are too large or too small.

  Press the option key while you click chipped. Those are the only options available.

• in hotmail, get "message too large" error - windows says it's a matter of firefox

  Received in hotmail messages arrive with "message too large" to adapt to the screen. Hotmail is absolutely useless to solve this and says it's a Firefox issue. I get the runaround of Adobe, BTW - I have to run Windows Explorer to get good downloads - are - they it on purpose to make it more difficult to use Firefox? What can I do?

  Clear the cache and cookies from sites that cause problems.

  "Clear the Cache":

  • Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Tools > Options > privacy > Cookies: "show the Cookies".

• Apple Watch: the font is too large to unlock

  Apple Watch: the font is too large to unlock

  Hello

  Zoom (an accessibility function) has been activated on your watch.

  • To turn off the Zoom:
    • On your iPhone, in the application of the watch, go to: My Watch (tab) > general > accessibility > Zoom - put it off.
    • Or on your watch, go to: homescreen (via a simple press on the digital Crown) > (cog icon) settings > general > accessibility > Zoom - tap and enable / disable.
  • If the accessibility shortcut has been enabled and configured for the Zoom, you can also enable and disable functionality more conveniently:
    • On your watch: quickly press the digital Crown (the round button) three times.
  • To set up accessibility shortcuts:
    • On your iPhone, in the application of the watch, go to: Watch My > general > accessibility > accessibility shortcut (bottom) > select / deselect Zoom.

• The "iTunes" item cannot be copied because it is too large for the size of the volume

  I am trying to copy my iTunes of 26 GB on a disc (empty) 128 GB flash file. I get the message (above) that the file is too large. Help, please!

  A volume in FAT32 cannot store files of 4 GB or enjoyed, regardless of the amount of free space it is on the disk. Reformat it in exFAT, NTFS or Mac OS extended, as you wish.

  (139802)

• How to create an animated title that scrolls like a classic title that is too large to fit on the screen of the iPod. How can I do this?

  I would like to create an animated title that scrolls like a classic title that is too large to fit on the screen of the iPod. How can I do this?

  < scratching head > long forgotten, how that will look like...?

  like in this video, around 00:40?

  https://Vimeo.com/11838765

  apply to your text moving or two keyframes and a mask behavior, I would say...