RMAN-06094: datafile 344 must be restored: in duplicate of active db db

Similar Questions

• DataFile 1 must be restored

  Hello
  in 10g R2, Win 2008 during recovery from backup by RMAN database, I get successively:
  

   
  rman>recover database; 
  
  RMAN-06094:datafile 1 must be restored 
  
  rman>restore datafile  'D:\BASES\mydb\DATA\SYSTEM01.DBF' 
  
  restore finished 
  rman>recover database; 
  
  RMAN-06094:datafile 1 must be restored 

  You have a solution?
  
  Thank you.

  6094, 1, "datafile %s must be restored"
  // *Cause: A RECOVER command was issued, and the recovery catalog indicates
  //         the specified datafile should be part of the recovery, but
  //         this datafile is not listed in the control file, and cannot be
  //         found on disk.
  // *Action: Issue a RESTORE command for this datafile, using the same
  //          UNTIL clause specified to the RECOVER command (if any), then
  //          reissue the RECOVER.
  

  RECOVER & RESTORE are different operations

• RMAN-06023: no backup or copy of datafile 3 found to restore

  Hello
  
  I searched the whole forum, but I have nothing.
  
  I rman backupset (x 64) and I'm trying to restore it to another machine, (same characteristic), but I got the error below.
  
  help please... :(
  
  
  
  RMAN > run
  2 > {}
  3 > ALLOCATE CHANNEL C1 DEVICE TYPE DISK;
  4 > RESTORE database;
  {5 >}
  
  using the control file of the target instead of recovery catalog database
  allocated channel: C1
  channel C1: SID = 170 type device = DISK
  
  From restoration to May 3, 10
  
  output channel: C1
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-03002: failure of the command restore at 2010-05-03 11:16
  RMAN-06026: some targets not found - abandonment of restoration
  RMAN-06023: no backup or copy of datafile 5 found to restore
  RMAN-06023: no backup or copy of the file 4 found to restore
  RMAN-06023: no backup or copy of datafile 3 found to restore
  RMAN-06023: no backup or copy of datafile 2 found to restore
  RMAN-06023: no backup or copy of datafile 1 found to restore
  
  RMAN >

  But mark correct/good

• RMAN-06023: no backup or copy of datafile 407 found to restore

  Hi all
  
  Database 11.1.0.7 on OUL5x64
  just did a full backup and check the log file, the backup was good, he saved on a NFS mount.
  
  
  It is the error in the log file
  
  # Release target DB info, catalog DB, catalog schema & RMAN executable: #.
  11.1.0.7
  Winding began in the log file: /tmp/rman_gold.log
  
  Recovery Manager11.1.0.7.0
  
  RMAN > run {}
  2 > set up what SNA 5976539071832.
  3 > restore database;
  4 > restore database;
  {5 >}
  executing command: SET until clause
  using the control file of the target instead of recovery catalog database
  
  From restoration to 1 April 10
  allocated channel: ORA_DISK_1
  channel ORA_DISK_1: SID = 1632 type device = DISK
  allocated channel: ORA_DISK_2
  channel ORA_DISK_2: SID = 1655 type device = DISK
  
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  
  RMAN-03002: failure of the restore command at 01/04/2010 11:11:12
  RMAN-06026: some targets not found - abandonment of restoration
  RMAN-06023: no backup or copy of datafile 407 found to restore
  RMAN-06023: no backup or copy of datafile 406 found to restore
  RMAN-06023: no backup or copy of datafile 405 found to restore
  RMAN-06023: no backup or copy of file 404 found to restore
  RMAN-06023: no backup or copy of datafile 403 found to restore
  RMAN-06023: no backup or copy of datafile 402 found to restore
  RMAN-06023: no backup or copy of datafile 401 found to restore
  RMAN-06023: no backup or copy of datafile 400 found to restore
  RMAN-06023: no backup or copy of datafile 399 found to restore
  RMAN-06023: no backup or copy of datafile 398 found to restore
  RMAN-06023: no backup or copy of datafile 397 found to restore
  RMAN-06023: no backup or copy of datafile 396 found to restore
  RMAN-06023: no backup or copy of datafile 395 found to restore
  RMAN-06023: no backup or copy of datafile 394 found to restore
  RMAN-06023: no backup or copy of datafile 393 found to restore
  RMAN-06023: no backup or copy of datafile 392 found to restore
  RMAN-06023: no backup or copy of datafile 354 found to restore
  RMAN-06023: no backup or copy of datafile 353 found to restore
  # Specific details of the problem encountered during the RMAN session: #.
  the database backup point also complete a NFS mount. then delete the database, startup nomount database and restore the controlfile then stop and start frame.
  connecting to rman as
  RMAN target /.
  run
  backup from the list; and the backup from the list of the archivelog all;
  get the number of SCN and restore in the above script.
  If failed the first time with message
  
  RMAN-06026: some targets not found - abandonment of restoration
  RMAN-06023: no backup or copy of datafile 407 found to restore
  RMAN-06023: no backup or copy of datafile 406 found to restore
  RMAN-06023: no backup or copy of datafile 405 found to restore
  RMAN-06023: no backup or copy of file 404 found to restore
  .........................
  
  After that he failed
  Then I added everything backup as
  RMAN >
  Catalogue backuppiece ' / rman/backup/ph2/xxxxxxxxxx.dbf';
  .......................
  ......................
  
  Then, run the restore again.
  It fails with the above error.
  
  I check, all backup elements are there.
  Why the rman could not locate the backup pieces.
  
  Can someone please have a suggestion.
  
  Thanks in advance!

  PLS, try this command without SNA 5976539071832 such as

  Run {}
  restore the database;
  recover the database;
  }

• RMAN-06023: no backup or copy of datafile 40 found to restore

  I'm using Oracle 10.2.0.3on Linux.
  
  I have a full backup taken a few months back.
  
  Database changes are quite small, so I was asked to do a recovery until the time.
  
  After the last database backup a few spaces have been created, and I do not have a backup of them.
  
  Now, when I tried to restore from old backup I hit this error
  
  RMAN > restore database from tag = "TAG20080819T104511";
  
  From restoration to 17 December 08
  using channel ORA_DISK_1
  
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-03002: failure of the restore command at 2008-12-17 14:52:39
  RMAN-06026: some targets not found - abandonment of restoration
  RMAN-06023: no backup or copy of datafile 40 found to restore
  RMAN-06023: no backup or copy of datafile 39 found to restore
  RMAN-06023: no backup or copy of datafile 38 found to restore
  
  Is it possible to ignore these storage spaces and to make a point in time recovery?

  Hi Ben!

  To exclude a tablespace in backup/restore do the following:

  Find the name of the repository where 40 datafile belongs to 1.).
  

  
  
  SELECT tablespace_name
  
  FROM dba_tablespaces t, dba_data_files d
  
  WHERE t.tablespace_name = d.tablespace_name
  
  AND d.file_id = 40;
  
  

  2.) configure an exclusion for this tablespace (allows to name TS1) in rman
  

  
  
  CONFIGURE EXCLUDE FOR TABLESPACE TS1;
  
  3.) Repeat steps 1 and 2 for datafiles 38 and 39.
  4.) Restore the database
  RESTORE DATABASE;
  5.) Actually you can't recovery your database because of the missing datafiles. Try to recreate them. This will only work, if you've all the archivelogs since your last backup. Do this within SQL*Plus
  
  
  
  startup mount
  
  ALTER DATABASE
  
  CREATE DATAFILE 40
  
  AS 'path/filename of file number 40';
  
  
  6.) repeat step 5 for 38 and 39 data files
  I don't exactly know if it works or not but I hope!
  concerning
  		   

• Defective single file restore: "datafile... already restored to the file.

  Hi all
  
  I ' am doing some tests with RMAN restore and restore a single file in a new directory.
  
  First execution of the restore script (run {restore datafile 14-'... » ;}) has been a success, but in the case where I deleted the restored file and restart the script, RMAN complains with:
  
  "datafile 14 is already restored to the file...". ».
  
  This means that RMAN keeps track of and refers to the previous actions of restoration?
  
  I find this rather strange RMAN behavior because I want RMAN just to use to deal with some files (should not make assumptions that the DBA can do or what he or anyone else has done it before...).
  
  Y at - it an option to 'force' RMAN to restore files, regardless of what happened before?
  
  
  Thank you,
  
  Heiko
  
  Edited by: user7368717 the 15.09.2009 07:54

  What the o/s if you are at and is the database always opens when you delete the file?

  There is an option of FORCE with RESTORATION.

• Office key code lost but he must run restore

  2008 HP G60 - 120US 32-bit Vista laptop

  Need to run in full restoration, but did not have the code key/drive for Microsof Office 2007 I got Office Depot

  install at time of purchase. It is located? What is possible, don't want to lose him.

  Thank you

  Welcome to Corey.

  If you can still start your system test it?

  http://www.NirSoft.NET/utils/product_cd_key_viewer.html

  Download links are at the bottom of this page.

  Let us know how things are going.

• BlackBerry Z10 must help restore data backed up again Z10 but did not have my old Z10

  Will be transfer of link blackberry an old back-up for a new Z10 Z10 when I don't have the old phone to connect.

  Maybe Ive missed something but I'm unable to make this project a reality.

  It would seem that the idea to save the phone would be somehow backup access at any given time.

  Any direction would be appreciated.

  Thanks for your input John. It seems that I tried to restore it with the wrong file.

  The restoration has worked a bit, but some contacts are missing. Better than nothing, I suppose.

• I have an old MacBook Pro that must be restored to factory settings to make it work again, but I want to assure you that I do not lose my products on creative (I can't afford to buy again now!) if I still have my numbers of series from 2012.

  I want to just make sure I don't lose my products when I get my MacBook Pro erased, but they are of 2012 so I'm afraid I won't be able to DL them again!

  Serial number are a permanent feature except under certain conditions.  Use of the cabin serve you when wish you them, always check the compatibility of the operating system.

  Concerning

  Stéphane

• the backup database must be restored after failover and flashback 11

  I tried a failover with 11g r2 and RAC. Failover worked. I have flashed then return of the database (old primary) according to this http://docs.oracle.com/cd/E11882_01/server.112/e17022/scenarios.htm#i1049997, and now is the archiveurs application again.
  
  The problem is in the broker, it says this
  
  

  DGMGRL> show configuration;
  
  Configuration - DG_Config
  
    Protection Mode: MaxPerformance
    Databases:
      DB11G_STBY - Primary database
      DB11G      - Physical standby database (disabled)
        ORA-16661: the standby database needs to be reinstated
  
  Fast-Start Failover: DISABLED
  
  Configuration Status:
  SUCCESS

  I tried deactivating and reactivating the configuration, but still the same. Any other ideas?

  Here's a link [url http://nikolayivankin.wordpress.com/2012/02/14/dgmgrl-reinstating-ex-primary-to-standby-by-flashback-database-feature/] a demo, your theme

• No - asm asm restore using duplicate

  version Oracle 11.2.0.2.0

  Hello a question guys, I'm trying to restore a non - asm asm database. I want to know if the following will work with the duplicate database.

  SET NEWNAME for DATAFILE ' / clu15/oracle/database/PROD/dbf/NDX_PROD.dbf' to '+ DGDEV1DBDATA03/database/DEV/dbf/NDX_PROD.dbf;

  SET NEWNAME for DATAFILE ' / clu15/oracle/database/PROD/dbf/NDX_PROD_01.dbf' to '+ DGDEV1DBDATA03/database/DEV/dbf/NDX_PROD_01.dbf;

  SET NEWNAME for DATAFILE ' / clu15/oracle/database/PROD/dbf/NDX_PROD_02.dbf' to '+ DGDEV1DBDATA03/database/DEV/dbf/NDX_PROD_02.dbf;

  SET NEWNAME for DATAFILE ' / clu15/oracle/database/PROD/dbf/NDX_PROD_03.dbf' to '+ DGDEV1DBDATA03/database/DEV/dbf/NDX_PROD_03.dbf;

  Thank you

  This above will work.

  If you want to use the architecture of DAO, you can simply give

  SET NEWNAME for DATAFILE ' / clu15/oracle/database/PROD/dbf/NDX_PROD.dbf' to '+ DGDEV1DBDATA03;

  You can also set the db_file_name_convert and log_file_name_convert.

• I turned off my phone to do a restore and now lock activation said that it belongs to someone else, to find HOW?

  I disabled find my phone to restore, do a restore itunes trying to get a SIM to activate and now the phone activation said lock that it belongs to someone else, HOW?

  It already belonged to someone else?

• Is it possible to restore the documents if the system restore has not been activated previously?

  is it possible to restore the documents because I turned off then turned on the system restore and lost all my documents. help please an old lady of 61, who needs these documents for school

  E-mail address is removed from the privacy *.

  * original title - documents can be restored from HDD after system restore has been turned off the on *.

  Hi jacqulinekleiss,

  If the system restore is off turn on the computer of all available restore points will be deleted and you will no be able to return to the previous state.

  System Restore "restore points" are missing or deleted

  http://support.Microsoft.com/kb/301224

• BES API must be used for Blackberry Enterprise Activation with?

  Which BES API method should be used to do Blackberry Enterprise Activation with?  On this, I found an example of code.

  Thank you.

  Hello

  Enterprise activation can be done through the BAA, it must take over the device. If you are looking for a code to set the EA password then please refer to the Interface of BAADispatcher the reference documents API BAA for the code examples:

  http://www.BlackBerry.com/developers/docs/BAA/5.0.0/

• Purchased a product key for Windows 7 Professional, but you must enter a different product key activation

  My laptop came with a Windows 7 Basic program trial and the trial ended so I bought a product key for Windows 7 Professional, because I got a discount on that student. When I try to activate it, it says I need to enter the product key for what I already use but I don't know the key to it. What am I doing here? Do I have to buy a product key for my Windows 7 original also?

  Windows 7 Home Basic Edition is not a trial.

  Is the Windows 7 Professional a full, level or Express upgrade?

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.