ElitePad 1000 G2: 10 Pro Version 1511, threshold 2 update Windows crashes on 'features and drivers '.

Similar Questions

• seven times this failed: "upgrading to windows 10 pro version 1511 10586 failure important 17/05/2016

  Microsoft has been automatically installing windows may 10 17,2016 I got 7 times:

  Upgrade to windows 10

  version Pro 1511 10586 failure important 17/05/2016

  Review:

  • How to: 10 tips before installing Windows 10
  • How to: 10 things to do if the Windows 10 install fails.

  Retry the upgrade manually:

  Option 1:

  Download the media creation tool

  Click with the right button on the MediaCreationTool.exe file and then click on run as administrator.

  

  Note: How to check if you are downloaded or installed the update Windows 10 November

  How to create an ISO or USB drive.

  Select upgrade this PC now and then click Next

  

  Option 2:

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10

  then

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  then

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

• Uninstall Windows Pro 8.1 to reinstall original Windows 7 operating system, and then reinstall Windows Pro 8.1?

  Here's a good. I want to uninstall my Windows 8 Pro upgrade, reinstall my original Windows 7 and then reinstall my Windows 8 Pro update. My product key will still work on Windows 8 Pro upgrade? My reason for this? I want to retrieve all of my software that came with my computer, when it was new. I have the disc, but also the keys. Also, if someone could walk me through the steps I sure would appreciate it. That is to say: "where should I start and how? Please, I beg you. I don't want to not update my Windows 8 Pro that is not my goal! My goal is to put back my original software on my computer that I lost (my ignorance) during the upgrade. All the software is on the recovery disk of I purchased from Acer. All I really need to know is if my product key for Windows 8 Pro that I bought in shop Windows will be valid. If someone can just answer, I would love!
  Thank you

  Hello

  You don't need to uninstall anything... Just boot with the disk #1 you have purchased from Acer...

  You may have you press a key at startup to start the process, but probably not...

  You may also delete the partitions on the HARD disk with a bootable 3rd party program, but probably not...

  The way these types of sets of discs work normally is that they write more everything on the HARD drive and restore it to its State 'as new '...

  You should not have more problems with the upgrade process, you had the first time...

• Adobe Acrobat 9 Pro, version 9.0.0 on Windows 10 system running.

  Acrobat keeps freezing.  It comes to my work computer, it is therefore of the utmost importance that the course of things.  Keep updated, but I'm not sure that update (s) to install and in what order to do it.  Thank you.

  Hi stephaniel37465727,

  Please note that Acrobat 9 is quite an old version and has not been tested on Windows 10 platform which could be the reason why you are facing problems.

  I suggest you use compatible with Acrobat XI either DC for your operating system versions.

  Hope it will be useful.

  Kind regards

  Ana Maria

• Elitepad 1000 G2: Screen keeps dimming.

  I work with a G2 Elitepad 1000 with Win10 pro.  Screen keeps dimming, then returns to normal & ther darkens again.   anyway to stop this option to stop this.

  Hello:

  The only suggestion I can offer if you have not done already, would be to turn off the Adaptive brightness setting in the menu of the peak power.

  See this link for corresponding to this setting.

  http://Windows.WonderHowTo.com/how-to/disable-adaptive-brightness-Windows-10-for-maximum-screen-brightness-0163440/

• English Acrobat 9 pro version.

  Hi, if I buy an English version of Acrobat 9 pro, how can I change the language to German?

  second question, is the Live Cycle Manger allways included in Acrobat 9 pro versions?

  Languages are the specific serial number and installation programs. You can't buy an English version and switch to German because German localized files simply wouldn't be here. Acrobat 9 Pro included LiveCycle Designer, Yes.

  Mylenium

• First Pro CC gives an error "Could not create image buffer" and crashing after installing a videocard GeForce GTX 1070.

  Hi all

  I recently installed a GeForce GTX 1070 video card and drivers current in my bench mounted, very happy for the potential break in the rendering and playback (I was using previously a very old ASUS Radeon HD 7850). I had nothing else problems since.

  When I first tried a project of creation of opening, audio refused to play (speakers, headphones, everything...) I looked at the volume mixer while playing through the timeline and no audio only showed upward). Everything seemed fine. I closed, cleared the cache, opened the first, this time hold Alt while doing so to reset the preferences. Open very well, audio read back fine, that only now first was blocked indefinitely the generation of PEK files for a short audio clip in the project.

  After a long bit of troubleshooting in the speakers, I went ahead and did a complete uninstall of Premiere Pro and After Effects, then reinstalled both programs to their current versions (2015.4 and 2015.3, respectively). No more problems of generation PEK, but something much worse. Now, whenever I try to change the CUDA acceleration enabled, I can maybe five minutes absolute performance first until I get an error "Could not create image buffer", warning of notifications of Windows that your computer is low on memory, and finally, a complete crash where the screen goes black, flickers a couple times, then stays black for good with only the mouse cursor appears on the screen.

  The images that I'm editing is all images Go Pro, no effects applied. I am doing this for a client and need ready in a week, but the constant crashing makes them difficult to work around. I can more or less run by changing the acceleration of software only, display options but it is much slower and the memory is still eaten up like crazy (if I place the open Task Manager and start to scrub through the timeline I can watch the memory usage get up to 95% in 20 seconds approximately). Reading suffers as a result once the RAM is full until almost full.

  Technical specifications

  First Pro CC 2015.4 (latest version)

  OS: Windows 10 Pro (Version 1511)

  CPU: Intel Core i7 - 5820 K CPU @ 3.30 GHz

  RAM: 16 GB

  GPU: EVGA GTX 1070 (latest drivers)

  SSD (OS and Adobe Suite installed): SanDisk SSD internal 240 GB 2.5 inch SDSSDA - 240 G - G25

  Hard drive (where I put my multimedia files): WD Black 2 TB Performance Desktop Hard Drive: 3.5 inch, SATA 6 Gb/s, 7200 RPM, 64MB Cache

  Motherboard: ASRock X 99 Extreme4 LGA 2011-3 ATX Intel

  Film source - source footage is an hour of video of Go Pro, all arranged on the timeline, no effect applied (I'm just trying change the original film in a short video).

  Type: MPEG Movie (.mp4)

  Image size: 3840 x 2160

  Frame rate: 29.97

  Format of the pixels: 1.0

  It is worth noting that, with my old dusty Radeon GPU, I was able to edit these clips with ease. No reading, no problem of image buffer. I do not see my RAM never go above 60% usage, when I got this card is installed.

  Also worth noting, that the first, I have noticed absolutely no problems, and the video card itself seems to work very well. I can play MGSV at max settings with perfect reading, as well as other graphics intensive games.

  Any help?

  It's been almost a week and I had zero problems. First Pro CC 2015.2 works like a dream! I'll go ahead and mark this thread closed.

  For those just tuning, I was able to find a solution by uninstalling the Premiere Pro and After Effects, and then reinstall them back to last known stable on my bench (Premiere Pro 2015.2 and after 2015.2 effects). So far, running these versions has been very good, even with active CUDA acceleration.

  The only downside is that all the projects I've done in Premiere Pro version 2015.4 should be re-edited from scratch. But I've had absolutely zero problems using the program, which is a relief. Hope Adobe fixes this problem whenever 2015.5 is out!

• Satellite Pro M70 came with disks of Windows XP?

  When I got my M70 it came only with a single disc! the agifts, it came with the Windows XP Pro disc? because I have Windows Vista Beta 2 and I can't install it unless I don't I have the disc for Windows XP! becuse, I use my laptop to school and if vista do not have Word so I'll have to go back to XP!

  Thanks for your help

  James

  Hello

  The unit was delivered with the Toshiba Recovery CD because the help of Toshiba (on the desktop) contains an option to create the own Toshiba driver and Tools CD.
  This is why only a disc.

  By the way. You can create the second partition and there you can install a second OS without removing the available WinXP

• El Capital is compatible with the MacBook Pro version 10.10.5? Can anyone help answer this question before I update? Thanks in advance.

  El Capital is compatible with the MacBook Pro version 10.10.5? Can anyone help answer this question before I update? Thanks in advance.

  Why did you start a new post? Post again only after only 8 minutes accomplished nothing.

  There is no general problem going to EL Capitan on your Mac.

  Some applications may require updating.

  Some devices like printer may require the updated drivers. For some readers of devices not being updated are available.

  This is the Office Mac Pro forum. I asked that your post be moved to the El Capitanforum or another appropriate forum.

  Please move to the EL Capitan forum or another appropriate forum. Thank you

• Elitepad 1000 G2: Elitepad 1000 impossible G2 update bios or boot on USB

  My G2 Elitepad 1000 was repaired in December because he did not work with Elitepad docking station. Support has replaced the motherboard.

  Now I'm unable to upgrade BIOS or even boot from a USB device.

  BIOS upgrades fail with the following error "an error has occurred during flash EFI.

  I tried to create a recovery USB flash drive (for flashing BIOS), but am not able to boot to the USB device (according to instructions).

  I was also unable to start on another USB support such as Windows, boot CD installers, etc...

  My tablet is now out of warranty (1 July... grrrr) and I can not open a service request.

  Please help.

  Given that HP did not respond, I kept searching for answers.

  The anniversary of 10 Windows Update yesterday failed with the error:

  "We could not update system reserved partition."

  So I searched for the error and found this MS support document: https://support.microsoft.com/en-us/kb/3086249

  It seems that HP had broke the 100 MB EFI Partition (System Reserved Partition) with updates and it prevented additional updates to the partition.

  I followed the instructions for Windows 7 or 8/8.1 with GPT partition and was able to update my BIOS. I will try to update Windows 10 now.

• Satellite click 10: Impossible to apply Windows Update to version 1511

  Hey all,.

  Despite having clean temporary files, files of previous windows installation and whatever other useless, I could only about 7-8 GB of free space, which proved to be insufficient for Windows Update to version 1511.

  He suggested to use an external drive to manage the update files, so I put on a 64 GB microSD card. Despite this choice, however, it still can not be updated. He will ask for additional free space on C: ~8.9Gb / for ~8.3Gb.

  There must be a way for these 32 GB MEM manage Windows updates, surely?

  Format you the SD card? You must format it first on the machine. research, formatting of 10 SD card windows. Better to put in a spare SD card and later to keep this card since it will have a copy of your update on this for future resets. Then pop in another good SD card for storage of the future, a few apps etc. won't go into it, but you can get them to do. Search, get your applications to store and operate on external drives. Do not use another anti-virus package except the built in windows defender, it is particularly light in size and won't run out of storage space and it you will protect well enough. You can safely remove all the stuff from Toshiba that comes with it to make room. also, there so many things on windows 10 without that you can do research stuff that you really need not windows 10.

• Can I install windows 7 on early 2015 macbook pro version with El captain?

  Can I install windows 7 on early 2015 macbook pro version with El captain?

  Thank you

  Install Windows 7 and earlier Apple Support on your Mac using Boot Camp -

  Check the tables in the link I provided to see if your computer works for Windows 7.

• Windows 10, Version 1511 is not properly installed on iMac

  I installed Windows 10 Home on my iMac Retina 4K , OS El Capitan 10.11.3, using the BootCamp Assistant and a Windows 10 ISO just downloaded from the Microsoft site to my iMac hard drive. The system (Windows 10)  was installed apparently without problems and seemed to function properly, including the wireless connections. During the installation, I  saw that the Windows version installed was that of July 2015. I then restarted the computer and it automatically started installing the November Update (version 1511 of Windows 10). At the end of the process, the screen showed the following warning (I´m paraphrasing from memory):
       "AUTOMATIC REPAIR"
       "Windows did not install correctly"
       "Restoring the system may restore your computer to a point earlier in time, when it was working properly..."
  I restored it to the only restore point available (the one before I updated to the 1511 version). After it finished, the following message was shown on the screen:
       "Automatic Repair was not able to repair your PC. Click on "Advanced Options" to try other options"
  None of the options repaired the computer. The wireless controllers had disappeared. I contacted Apple Care (I have the three year extended warranty option) and they said they could not help me because this is a Microsoft Windows problem and I then contacted Microsoft support and they said they could not help me because Microsoft does not support Windows installed on Mac computers.
  Can anybody help me?
  Thank you!

  You want your post moved to the forum of Boot Camp, is where the people of MS Windows and Boot Camp hang out. Most of the people on this forum do not use Windows. You can have someone answers, but your chances are better using the right forum.

• What questions should I expect if I go my Macbook Pro version 8.1 of Snow Leopard to El captain?

  What questions should I expect if I go my MacBook Pro version 8.1 of Snow Leopard to El captain?  Apple says it is eligible.

  Start by looking at roaringapps.com.  It shows applications that do not work in the different versions of OSX.  In particular, the PowerPC applications do not work beyond SnowLeopard.

  Report of the amount of RAM you have (more useful), and you might consider upgrading to an SSD if your hard drive is 3 years old only because that for speed and because each HD eventually die even if it isn't now.

• Logon with fingerprints does not work after update of Windows 10 1511 threshold 2

  Connect to Windows with Windows 10 digital fingerprints and native integration of fingerprint worked well after a new install of Windows 10.

  However, yesterday I received the update of Windows 10 threshold 2 aka 1511 update. After this update, I can't connect with my fingerprint more. Removal of fingerprints and re-learning of the fingerprints with Windows Hello do not help. I tried different fingers and made very prudent recognition. But even when the windows screen lock and trying to connect with fingerprint reader doesn't fail. Windows says it's the footprint of evil and after 3 attempts, I need to enter the PIN to login.

  How can I reactivate fingerprint logon?

  Driver: 4.5.317.0 (PS Synaptics sensors), signed by Microsoft Windows Hardware Compatibility

  The problem was resolved when a new driver has been installed by running the tool "System Update" on my Thinkpad Lenovo. The driver is installed by the tool is "Common validity of fingerprint driver 4.5.503" (the Watch Windows Device Manager driver Synaptics FP sensors 4.5.503)