RMAN backup fails with the error

Similar Questions

• Backup fails with the error code 0 x 810000005

  Original title: error codes 810000005

  Backup fails with the error code 0 x 810000005

  Hi ElaineKingsley,

  ·         What is the exact error code is 0 x 810000005 or 0 x 81000005?

  ·         To the place where you are performing the backup?

  ·         Not him enough not space is available to perform the backup?

  I suggest you do the check disk (chkdsk) to the backup location.

  Check the hard disk for errors

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  Chkdsk WARNING: CHKDSK can repair problems related to bad sectors, lost clusters, reticulate files and directory errors. I suggest you Save the data because data may be lost in repairing this sector.

  If the error code is 0 x 81000005 see link for resolution below:

  http://blogs.technet.com/b/filecab/archive/2008/03/12/common-causes-and-solutions-to-backup-system-restore-and-complete-PC-backup-problems-updated.aspx

  Hope this information helps.

• Windows 7 backup fails with the error code: 0x8078012D

  I ran several backups on my external hard drive without problem, but I am now constantly a backup failure with an error code of 0x8078012D.

  How can I fix?

  Hi Helen,

  I suggest to rerun the command chkdsk (check disk) and let us know if there are bad sectors found/fixed.

  You can also see the following article for more information about the disk check:

  Check a drive for errors

  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

   

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Also, make sure that the Volume Shadow Copy service is running.

  Follow the steps below:

  a. click Start.

  b. type Services in start search.

  (c) in the search for Services Windows shadow copy volume and the Windows backup from the list.

  d. right-click on the Service.

  e. click Properties.

  f. Select the Startup Type to Manual.

  g. click OK.

  h. now, repeat the same for the service Windows backup.

  Let us know the results.

• Windows backup fails with the error "the last backup was not entirely successful.

  Original title: baclup fails

  I've repeatedly tried to back up my Win 7 files. I turned off check virus and Internet.  The only message I get back is "the last backup haven't successfully' information plus button just translates to"try again ".

  Hey Joe,

  (a) did you get an error with this error code?

  (b) do you remember to make changes on the computer before the show?

  This could be the shadow copy Volume service, and SPP services are not started.

  To restart the Volume Shadow Copy service and the services of the SPP. You must be logged on as administrator to perform these steps.

  1 open administrative tools by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Administrative Tools.
  2. double-click on Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  3. If the SPP function is disabled, double-click it to open the service properties.
  4. If the Volume Shadow Copy service is double-click on it to open the service properties
  5. click on the startup type list, click Automatic (delayed start), and then click on apply.
  6. under the service status, click Start.

  If the problem persists, follow the steps in troubleshooting section and check if that helps:

  Windows backup or restore 0 x 80070001, 0 x 81000037 or 0 x 80070003 errors

  http://support.Microsoft.com/kb/973455

  Hope this helps, if you need help on windows let us know we will be happy to help you.

• backup fails with the error (0 x 80042318) (VSS_E_WRITER_INFRASTRUCTURE)

  -J' get the following errors when you try to back up my box.

  MsSnapShot::waitop:GatherWriterMetadata:QueryStatus2 error hr (0 x 80042318) (VSS_E_WRITER_INFRASTRUCTURE)
  MsSnapShot::do_gather_writer_metadata:waitop RC(-4)
  MsSnapShot::do_init:do_gather_writer_metadata error(-2)
  SnapCMInterface::discover_apps:list_backup_selectable (RC(-3)

  -exit "vssadmin list providers" seems correct

  -"vssadmin list writers" shows nothing

  -Volume Shadow Copy and provider of software MS Shadowcopy are disabled

  LxA10,
  One thing I suggest you start by would be to run Chkdsk /r and sfc/scannow.  See if those correct any errors and test.  Also, you should boot your system and test.

  Also, if you can let us know what version of XP and what service pack level you have.  You use the backup and Restore Wizard or another program?

  Post back with the info. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• System backup fails with the error no disk space

  I have a Dell laptop with Vista. There E. internal recovery disc I saved 1/2011, but subsequent backups fail, no disk space. The previous backup should be deleted everything first?  I'm afraid to delete all files on the recovery drive for fear of a further backup failure.  If there are files already on the drive if no changes have been made their backup just jump on them and backup new files?  I'm not a computer guru so sorry if these are questions fans.

  Hello

  When you set up your computer, you must create a backup image of the Windows computer, which is like taking a snapshot of the programs, system and files on your computer settings. You can use this backup if your computer ever stops. Although this type of backup includes your personal files, we recommend that you back up your files regularly using the back up files Wizard. You must also update the Windows complete PC backup image every six months.

  If you copied the data from drive E to another location, then it is safe to delete the content in the reader.

  See: http://windows.microsoft.com/en-US/windows-vista/Methods-for-backing-up-your-files

• WIN 7 x 64 backup fails with the error 0 x 81000019

  My backups using Windows 7 backup & restore used to work flawlessly until a few weeks back when they have started to not give the error code 0 x 81000019. I've tried everything suggested online ensuring that VSS & SPP to automatic and started. I even went a step further because I had a personal copy of all my files on my backup drive (WD My Book Studio Edition 1 TB) - I did a clean reinstall of WIN 7 thinking that would solve the problem but nothing is done - I have always the same error message "a SHADOW copy could not BE CREATED - please CHECK VSS & SPP APPLICATION of the EVENT LOGS FOR MORE information. "DETAILS: INSUFFICIENT STORAGE TO CREATE THE SHADOW COPY STORAGE FILE OR OTHER SNAPSHOT DATA.

  My backup disk has 822 931 GB free GB!

  Many others have had this same problem... Help, please!

  Mike

  Hello msab,.

  Thanks for posting on our forums.

  Please check that the hard drive is formatted in NTFS.  If you think that the updates may be the cause, unstill them one at a time to see if that solves your problem.

  I hope that this answer to your questions, if you need further assistance please come back and post, we are more than happy to help you.

  Kind regards

  Edgar
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Backup fails with the error code 0 x 80070422

  Can not execute 'change settings' in the backup.  I get a message: "service cannot be started because it is disabled or don't no enabled devices that are associated with.» 0 x 80070422 '.  I am running Windows 7 Professional on a 64-bit computer.  Anyone have the same problem or a solution?  Thank you.

  It was for me too. Brings up a few questions... The big East... Why was first it disabled?  As Carbonite backup service would do that? and how would he leave? It's a little paranoid. So I always wonder why. It is part of a windows update? But... it worked. Sure would like to know why my installation does not automatically activate a service that is supposed to work just.

  Thank you, Tom

• Backup fails with the error code 0 x 81000037

  I'm trying to run a full backup on Windows 7 Ultimate 64 bit, but I get an error message 0 x 81000037. I am backup on an external disk that was used to back up my old machine XP using the Memeo software.

  Any suggestions?

  Dave

  Failure of Windows backup while trying to read from the snapshot. Code: 0 x 81000037

  How to troubleshoot Windows backup and restore problems at one point analysis folder or its subfolder is added to a user library in Windows 7
  http://support.Microsoft.com/kb/973455

  Also Microsoft Answers post: http://social.answers.microsoft.com/Forums/en-US/w7performance/thread/ba1a7ee1-3cc0-4765-a0a8-2c4cc05caabc
  And: http://social.answers.microsoft.com/Forums/en-US/w7performance/thread/b68afbf9-ed1d-44e2-a044-63c7911b0f55

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• RMAN duplicate failed with the error of file block change track: ORA-19755

  I met following error when duplicate a source to target both 11 GR 2 on linux:
  
  RMAN-03015: an error has occurred in the script stored memory Script
  RMAN-06136: the auxiliary database ORACLE error: ORA-01507: database not mounted
  ORA-06512: at "SYS." "X$ DBMS_RCVMAN ', line 13466
  ORA-06512: at line 1
  RMAN-03015: an error has occurred in the script stored memory Script
  RMAN-10032: unhandled exception when executing job step 4:
  ORA-00283: cool cancelled due to errors
  RMAN-11003: failure in parsing / execution of the SQL statement: alter database recover logfile '+ HR_FRA/HRtst/archivelog/2012_11_27/thread_1_seq_5824.2541.800419437 '.
  RMAN-11001: Oracle error:
  ORA-00283: cool cancelled due to errors
  ORA-19755: could not open file change tracking
  ORA-19750: change the trace file: "+ HR_DAT/HRprds/changetracking/ctf.906.799250971".
  ORA-17503: ksfdopn:2 could not open the file +HR_DAT/HRprds/changetracking/ctf.906.799250971
  ORA-15012: ASM '+ HR_DAT/HRprds/changetracking/ctf.906.799250971' file does not exist
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-03002: failure of Db in dual at 11/27/2012 02:48:10
  RMAN-05501: abandonment of duplicate target database
  
  RMAN >
  
  Complete recovery manager.
  
  
  I created a file in the dummy directory of track changes but the name is different since it is OMF on target, still does not work.
  
  Please help here. Thank you.

  Hello;

  Expected error.

  Try:

  alter database open resetlogs;
  

  You probably have a good copy and RMAN might want a newspaper that does not exist.

  Check here as in step 8, I get the same thing:

  http://www.Visi.com/~mseberg/RMAN/restore_database_without_catalog.html

  Best regards

  mseberg

• All security updates fail with the error A 80071, 91 code

  Hello!

  System information: Windows 7 Ultimate 64-bit, i7-720QM, 6 GB RAM, 256 GB SSD, ATI 4670 [Dell Studio XPS 1645]

  Background:

  • UAC was arrested. Turn on UAC stop my gadgets to work [another thread on these forums...].
  • A week ago, I got speech recognition works only with a local edition. Insert this ctfmon '=' CTFMON registry entry. EXE, to HKLM\Software\Microsoft\Windows\CurrentVersion\Run, fixed the problem. However, I can't find to this registry entry.
  • Four days ago, I had slow internet speed. I did a 'Complete' Microsoft Security Essentials scan and it found many exploits (Explot: Java/CVE-2009-3867.) BX, TrojanDownloader / OpenConnection.AK, TrojranDownloader:Java / Rexec.c and a dozen others). I removed all the. The internet speed is back to normal.
  • This morning, I have updated the firmware on my SSD to activate the TRIM. I restored an image of the drive I did with Windows Backup and Restore just before updating the drive.

  Problem:

  • I tried Windows Update after update of the SSD. It downloads all updates, installs, and prompts you to restart the computer to complete the installation. During the shutdown, some files are 'configured '. Upon restart, during the boot of Windows GUI (circles of flight), there is a break-up of the code, something about the registry. On logon, it gets "35%" and says so "returning default configuration updates,' or something like that. I get a notification indicating that the updates failed.
  • On Windows Update, only Silverlight, Windows malicious software removal, MSE definition updated and updated Office Publisher are successful.
  • All other updates (security updates, cumulative updates, security updates for IE, updates for Windows) fail with the error code A 80071, 91.
  • If you are looking for updates that fail, here they are: KB2416400, KB2296199, KB2305420, KB2385678, KB2423089, KB24236673, KB2442962, KB246759 and KB2443685.

  What I tried:

  • Disk Cleanup attempt (and unfortunately removed all restore points). Did not work.
  • Attempt to sfc/scannow. He found a few files, that it could not correct; I have the CBS.log newspaper if you need. However, updates still do not work.
  • Tried to reset the resource manager to file with "fsutil resource setautotest true c:\ ». She is successful. However, after the restart, the updates still do not work.
  • Tried a Full scan with MSE. No anomaly.
  • Tried to reset components to update Windows (using the Vista Fix - It via KB971058). Updates still do not work.
  • Attempt of Microsoft Malicious Software Removal Tool (updated dec 2010) Full Scan, no malicious software was detected. Updates still do not work.
  • Attempt of Anti-Malware analysis complete Malwarebyte, no malicious software found. Updates still do not work.

  I don't think that this is malware, but a Windows problem... My internet is wobbly for these last two days, a lot of packet loss (pages only "" half load, some missing frames, etc.). Not sure if this is related, but it downloads the updates very well. It is not always the marker "35%".

  I'm out of ideas. What's next?

  Thank you

  ~ Ibrahim ~.

  1. about 1 year, I installed MSE.

  2 McAfee has been preloaded; the subscription was updated (in a 90-day trial), and I uninstalled McAfee completely (regular uninstall and Removal Tool provided by McAfee).

  3. Yes, for about 30 minutes before I uninstalled and installed MSE.

  4. Yes.

  However, with a little help seven forums, we have figured out it is the registry. I did a reinstall and then the updates installed correctly.

  Thanks for the help, if! :)

• Backup fails with an error of device 0 x 807812.

  Original title: device error 0 x 807812

  Backup fails with an error of device 0 x 807812. I tried a disk of 1 TB of my book and a Seagate 1 TB Western Digital. Both failed with the same error. The system says that I have the most recent and correct drivers. My computer is Deel Latitude 17r.

  Hi James,

  Thanks for posting your question in the Microsoft Community.

  The error would have occurred if the services associated with Windows backup may have been disabled, you can try to restart the service, follow the steps below:

  1. click on start.

  2 type Services in the start search.

  3. in the search for Windows Services of shadow copy Volume in the list.

  4. right click on the Service.

  5. click on properties.

  6. Select the Startup Type to manual.

  7. click on OK.

  8. repeat the same for the service Windows backup.

  If the problem persists, then I suggest you run the chkdsk command, which fix chkdsk errors, follow these steps:

  i. Click Start.

  II. type cmd in the start search box.

  III. right-click on cmd.exe list programs and then select the run as Administrator option.

  IV. If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  v. in the command prompt window, type the following command and press enter Chkdsk /R

  VI. o press when you are prompted to check the drive the next time the system restarts.

  VII. close all applications and restart the computer.

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

  When you restart, Windows checks the drive for errors, and then Windows starts. Now run the disk check in command prompt, follow the steps below:

  Now, when you try to perform the backup, I recommend that you can try to disable the temporary security on the computer software and perform a backup, be sure to activate security in the computer software.

  Disable the antivirus software:
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

   

  If you need further assistance on this topic, let know us and we will be happy to help you.

• OPatch failed with the error code 72

  Hello
  
  I try to apply the patches to the database, whenever I try to use opatch I get error below.
  ----------------------------------------------------------------------------------------------------------------------------------
  
  [oragold@apps OPatch] $ opatch lsinventory
  Citing O Patch 10.2 .0.2.0
  
  Interim fix installer Oracle version 10.2.0.2.0
  Copyright (c) 2005, Oracle Corporation. All rights reserved...
  
  
  Oracle home: /u02/oracle/PROD/db/tech_st/10.2.0
  Inventory Center: / home/oragold/oraInventory
  from: /etc/oraInst.loc
  OPatch version: 10.2.0.2.0
  YES version: 10.2.0.2.0
  YES location: /u02/oracle/PROD/db/tech_st/10.2.0/oui
  Location of the log file: /u02/oracle/PROD/db/tech_st/10.2.0/cfgtoollogs/opatch/opatch-2009_Mar_30_16-28-49-EST_Mon.log
  
  List of houses on this system:
  
  Name of the House = OraDb10g_home1, rental = "/ u02/oracle/PROD/db/tech_st/10.2.0/db/inventory/prereqs".
  Failure of the load of the inventory... OPatch failed to load the inventory for the given Oracle Home.
  Possible causes are:
  Oracle Home Dir. path does not exist in the Central stock
  Oracle Home is a symbolic link
  The Oracle Home inventory is corrupted
  Failure of the LsInventory Session: OracleHomeInventory::load() gets oracleHomeInfo null
  
  OPatch failed with the error code 72

  Hello

  Failure of the load of the inventory... OPatch failed to load the inventory for the given Oracle Home
  The Oracle Home inventory is corrupted

  Please, check the following:

  (1) you have the last installed opatch
  (2) orainst.loc exists and it is not corrupted
  (3) inventory_loc in orainst.loc points to the good oraInventory
  (4) oraInventory exists and it is not corrupted
  (5) the local inventory exists and it is not corrupted

  If missing oraInventory, restore it from a backup, or please refer to recreate.

  Note: 274526.1 - how to download and install opatch (generic platform).
  https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=274526.1

  Note: 295185.1 - how to recreate the Global oraInventory
  https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=295185.1

  Note: 360079.1 - Global inventory and Local explained
  https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=360079.1

  Note: 754667.1 - "Opatch Failed With Error Code 73' /var/opt/oracle/oraInst.loc pointing oraInventory bad location
  https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=754667.1

  Kind regards
  Hussein

• Home Vista premium: KB978338 fails with the error code 80004005

  Cannot install other updates windows update screws. Impossible to find answers to this specific problem, all the links seem to point to XP or windows 7

  Went to the Microsoft site and just tried to download and install just the fix KB978338, watched as she worked, system has rebooted with what looked like 266/266/registry component machine appearing on the screen just after the message of the HP bios and just before loading windows.  The PC then realized... Updates not configured correctly - returning changes.

  Seem to be stuck in this loop that KB978338 will not install and stops all other updates installation as all fails with the error code 800F0826.

  Hi gbislay,

  I think that you are able to get on the desktop after changes have been restored.

  Step 1: Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  Step 2: Download and run the system update tool. This tool runs an ad hoc analysis of inconsistencies that might prevent future maintenance operations.

  The system update tool

   

  Step 3: Clean boot the computer

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Important: n ' forget not to put the computer to follow normal start-up step 7 in the link.

  Step 4: Disconnect all external devices (printers, scanner, USB (universal serial bus) readers, etc...) Except the mouse and keyboard and then try to install the updates.

  You can see the steps outlined in the article below, which deals with a similar question

  Windows Update error 800f0826

  The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7

  Service pack Windows Vista and Windows Server 2008 install fails with error 0x80004005

   

  Note: Steps to solve the problem of Windows Update for Windows 7 is valid for Windows Vista.

  Thanks and greetings
  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************
  Visit our Microsoft answers feedback Forum and let us know what you think.

• KB2183416 Windows Update for IE8 repeatedly fails with the error code "WindowsUpdate_8007371C" "WindowsUpdate_dt000"

  KB2183416 Windows Update for IE8 repeatedly fails with the error code "WindowsUpdate_8007371C" "WindowsUpdate_dt000"

  Whenever I run this update, it seems that it installs about 90% of the way but then stops and breaks down about 20 seconds later.  If someone else sees this problem and is at - it a solution?  I'm running Vista Home Premium SP2 and KB2183461 is listed as a critical update for my system.  Help?

  Preliminary stage: If the Tea Timer of Spybot is enabled, please disabled until we finished this thread. Seehttp://aumha.net/viewtopic.php?f=26&t=32409

  Tip: If you don't fully understand what Tea Timer does and how it does, leave it disabled permanently.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  McAfee applications (and Norton) are known for not not upgrade (or uninstall) "clean". If you have McAfee Security Center installed since you bought the computer, he is been updated (automatically) several times. Try the following:

  1. run this triple McAfee fix: http://service.mcafee.com/FAQDocument.aspx?id=TS100507

  2. after reinstallation of McAfee Security Center to step #3 patch triple, manually & repeatedly updated McAfee Security Center until you get one invite "no updates more".

  3. OPTIONAL: If you have had problems with IE8, open IE8 (only) to http://support.microsoft.com/kb/923737 & run the difficulty.

  4. OPTIONAL STEP: Open IE8 (only) to http://support.microsoft.com/kb/971058 & run the difficulty by DEFAULT inside and modes and AGGRESSIVE. [1]

  5 restart and test by launching a manual check of updates & see if KB2183461 now installs. See...

  How will I know if my computer is up to date?
  http://Windows.Microsoft.com/en-us/Windows-Vista/how-can-I-tell-if-my-computer-is-up-to-date

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove Programs (Windows XP) or updates installed (Vista & Win7).

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft