Windows 7 backup fails with the error code: 0x8078012D

Similar Questions

• Backup fails with the error code 0 x 810000005

  Original title: error codes 810000005

  Backup fails with the error code 0 x 810000005

  Hi ElaineKingsley,

  ·         What is the exact error code is 0 x 810000005 or 0 x 81000005?

  ·         To the place where you are performing the backup?

  ·         Not him enough not space is available to perform the backup?

  I suggest you do the check disk (chkdsk) to the backup location.

  Check the hard disk for errors

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  Chkdsk WARNING: CHKDSK can repair problems related to bad sectors, lost clusters, reticulate files and directory errors. I suggest you Save the data because data may be lost in repairing this sector.

  If the error code is 0 x 81000005 see link for resolution below:

  http://blogs.technet.com/b/filecab/archive/2008/03/12/common-causes-and-solutions-to-backup-system-restore-and-complete-PC-backup-problems-updated.aspx

  Hope this information helps.

• Error code 464: I'm trying to update my windows but I failed with the error code associated with 464

  IAM trying to update Microsoft Office Service Pack 2

  ·                         http://www.Microsoft.com/downloads/en/default.aspx

  Put the KB numbers in the search at the above link > download them manually.

  If this does not solve it:

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  Mick Murphy - Microsoft partner

• Windows Update KB968930 fails with the error code 800F080D

  For the last week I have "been trying to install this update, Windows PowerShell 2.0 and WinRM 2.0 for Windows Vista (KB968930) and the installation fails, with error code 800F080D. I am always prompted to install it. Is there a resolution? Meanwhile a few other updates when the installation was successful. Thanks in advance!

  Hi MariMaraki,

  If you receive the Windows Update 8024200d error, it may mean that an update did not finish to download or install. The System Update Readiness Tool for Windows can correct some conditions that can cause this error.

  You can check the link and try to use the system analysis tool and check.

  Windows Update error 8024200d

  http://Windows.Microsoft.com/en-us/Windows7/Windows-Update-error-8024200d

  This also applies to Windows Vista.

  After you run the tool, try to install the update manually and check.

  See the link to download the update:

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=f2fa1227-9a34-4E29-AA03-62f5c00e16f2&displaylang=en

• Windows Update KB968930 fails with the error code 80070026

  Windows Update fails to load after the creation of a restore point. Someone at - it guess why?

  The error that you receive on the Windows Update page is 0 x 80070026 (ERROR_HANDLE_EOF STRSAFE_E_END_OF_FILE) seems to be the problem with the update being corrupted during the download somehow.

  I will recommend allows you to perform a sweep of auditor of file system (CFS) to make sure that the Windows system files are in place and not the origin of the problem.

  You can try to follow the given article:

  http://support.Microsoft.com/default.aspx/KB/936212>

  NOTE: If the SFC Scan doesn't find any errors on the machine, you can download updates manually on the computer from the given link and install it:

  You can also try the following article to reset Windows Component Update:

  http://support.Microsoft.com/kb/971058>

  ~ or ~.

  I would recommend that you...

  Launch a collateral request for assistance free Windows Update:

  https://support.Microsoft.com/OAS/default.aspx?Gprid=6527>

  Support for Windows Update:

  http://support.Microsoft.com/GP/wusupport>

  --

• XP Media Center - unable to connect to Windows Update MSE fails with the error Code: 0X80072EFE

  OS: Windows XP Media Center: SP3, P4 3.20 Ghz, 1 GB of memory IE V8 processor

  I currently have problems to connect to Windows Update. I can't connect to the site at all and is the "this page cannot be displayed" whenever I try to open it. I diagnose the network connection and he came back with no problems found. I can download & install Microsoft Security Essentials, but I get error 0x80072EFE when I try to update. Note: MSE seems to update on its own, but not via the update button. I reset IE8 by default as well as the windows firewall and the IP (Winsockfix.exe) stack

  I also ran several different viruses, malware and Trojan scanners and all are own return. (AVG, Norton Security scan, MSE. I tried to run the scan to Microsoft Live, but the page froze when I tried to download it. It seems that any Microsoft Security site is blocked for some reason any. A Hijack log is available if needed?

  I had some browser redirect issues (I suspect the Virus), but it was very random and seems to have settled down. The main problem now is to get the update in the system and the MSE.

  Thank you

  TMcC

  Problem solved!

  Trojan:DOS / main Alureon.A in the MBR on the hard drive. Start into the recovery console and run FixMBR. It has detected the MBR was not correct and re-written the record. Windows Update now working as the MSE to date.

  I will me BEDTIME!

  Thank you guys for the entries.

  Tom

• Cumulative update to IE9 for Windows Vista (KB292418) fails with the error code 800719E4

  Automatic update of Windows is on and downloaded the updated Cumulative of IE9 for Windows Vista (KB292418). Its installation was also successful until stage 2.

  Upon restarting, the system did not proceed to step 3 and reported that he could not apply. The windows update tries to repeatedly apply this patch has failed, but never succeeds. When the computer reboots, the white screen will appear. I ran the autoatic troubleshooting provided by Microsoft who reported some problems with the registry and settings.  Even after the system is restarted, the problem still persists.  I would like to find a solution to this problem.

  My system is running Windows Vista Home Basic with Service Pack 2 32-bit.

  Moved from Vista to install, upgrade and activate Forum.

  Hello

  Try to download the update and save it to your desktop

  Close all windows/Applications

  Right-click on the file and select run as administrator

  If that fails, run the system update tool

  http://Windows.Microsoft.com/en-us/Windows7/what-is-the-system-update-readiness-tool

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058/en-us

• Backup fails with the error code 0 x 81000037

  I'm trying to run a full backup on Windows 7 Ultimate 64 bit, but I get an error message 0 x 81000037. I am backup on an external disk that was used to back up my old machine XP using the Memeo software.

  Any suggestions?

  Dave

  Failure of Windows backup while trying to read from the snapshot. Code: 0 x 81000037

  How to troubleshoot Windows backup and restore problems at one point analysis folder or its subfolder is added to a user library in Windows 7
  http://support.Microsoft.com/kb/973455

  Also Microsoft Answers post: http://social.answers.microsoft.com/Forums/en-US/w7performance/thread/ba1a7ee1-3cc0-4765-a0a8-2c4cc05caabc
  And: http://social.answers.microsoft.com/Forums/en-US/w7performance/thread/b68afbf9-ed1d-44e2-a044-63c7911b0f55

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• Windows Update always fails with the error code 80072f8f (Windows vista SP2).

  All directings on assistance to this error page in fact and not solved the problem.

  When you try to synchronize the clock as instructions say this fails also.

  Internet Explorer says invalid certifocates on microsoft support pages.

  It is a clean installation, everything that is on the machine is Vista SP2

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_update/windowsupdatedt000-windowsupdate80072f8f/945f3ec1-8bac-4c10-A54E-1e564d18c37e

  03:37:1108/01/11

• Backup fails with the error code 0 x 80070422

  Can not execute 'change settings' in the backup.  I get a message: "service cannot be started because it is disabled or don't no enabled devices that are associated with.» 0 x 80070422 '.  I am running Windows 7 Professional on a 64-bit computer.  Anyone have the same problem or a solution?  Thank you.

  It was for me too. Brings up a few questions... The big East... Why was first it disabled?  As Carbonite backup service would do that? and how would he leave? It's a little paranoid. So I always wonder why. It is part of a windows update? But... it worked. Sure would like to know why my installation does not automatically activate a service that is supposed to work just.

  Thank you, Tom

• KB2183416 Windows Update for IE8 repeatedly fails with the error code "WindowsUpdate_8007371C" "WindowsUpdate_dt000"

  KB2183416 Windows Update for IE8 repeatedly fails with the error code "WindowsUpdate_8007371C" "WindowsUpdate_dt000"

  Whenever I run this update, it seems that it installs about 90% of the way but then stops and breaks down about 20 seconds later.  If someone else sees this problem and is at - it a solution?  I'm running Vista Home Premium SP2 and KB2183461 is listed as a critical update for my system.  Help?

  Preliminary stage: If the Tea Timer of Spybot is enabled, please disabled until we finished this thread. Seehttp://aumha.net/viewtopic.php?f=26&t=32409

  Tip: If you don't fully understand what Tea Timer does and how it does, leave it disabled permanently.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  McAfee applications (and Norton) are known for not not upgrade (or uninstall) "clean". If you have McAfee Security Center installed since you bought the computer, he is been updated (automatically) several times. Try the following:

  1. run this triple McAfee fix: http://service.mcafee.com/FAQDocument.aspx?id=TS100507

  2. after reinstallation of McAfee Security Center to step #3 patch triple, manually & repeatedly updated McAfee Security Center until you get one invite "no updates more".

  3. OPTIONAL: If you have had problems with IE8, open IE8 (only) to http://support.microsoft.com/kb/923737 & run the difficulty.

  4. OPTIONAL STEP: Open IE8 (only) to http://support.microsoft.com/kb/971058 & run the difficulty by DEFAULT inside and modes and AGGRESSIVE. [1]

  5 restart and test by launching a manual check of updates & see if KB2183461 now installs. See...

  How will I know if my computer is up to date?
  http://Windows.Microsoft.com/en-us/Windows-Vista/how-can-I-tell-if-my-computer-is-up-to-date

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove Programs (Windows XP) or updates installed (Vista & Win7).

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Im trying to upgrade to sp2 for windows vista and it keeps fail with the error code 80070017

  Im trying to upgrade to sp2 for windows vista and it keeps fail with the error code 80070017

  error 0 x 80070017 data ERROR_CRC des 2147024873 (cyclic redundancy check).

  The files may be damaged or missing. Make sure all files required for installation are available, and restart the installation.

  Clean the system (compensation to all Temp/Tmp folders and included the content delete all offline, the TIF browser, Cookies, compensation do a disk cleanup.)

  Click the Start button. In the search box, type Disk Cleanup, and then in the list of results, click Disk Cleanup.

  Maybe some interviews, try to run the "chkdsk/r" command at the command prompt

  Check disk or Chkdsk is disk error checking in VISTA. It can be used to verify orruption and optionally repair errors and bad sectors on the hard disk.

  How to run Checkdisk at startup CHKDSK

  http://www.Vistax64.com/tricks-n-tips/67612-checkdisk.html?LTR=C>

  Run SFC/scannow

  File system (CFS) auditor checks all files in Vista are where they should be, and that they are not corrupt.

  WHY: You want to ensure that the base operating system files have not been damaged or changed.

  How to fix and check the integrity of system files of Vista with the System File Checker: SFC/scannow

  http://www.Vistax64.com/tutorials/66978-system-files.html>

  04/01 / 1107:15: 20:00

• When I use the Client for NFS provided by Windows 7, I'm unable to connect. The "mount \\ip address\share Z:" command fails with the error code "the path not found network".

  Identification of customer's Windows 7 NFS UID GID information

  I am trying to connect to the Windows 7 Client NFS on a server running on a computer (VxWorks) NFS.  I am able to properly connect Client NFS software by a 3rd party on the NFS server.  However, when I use the Client for NFS provided by Windows 7, I am unable to connect.  The \\ip address\share Z: mount"command fails with the error code"the path not found network ".  I can't do a ping of the computer running the NFS server.

  The NFS Client operating system: Windows 7 Ultimate, 64-bit

  Data captured by Wireshark

  MOUNT V1 EXPORT call 3rd party client
  Identification information Flavor: AUTH_UNIX (1)
  Length: 32
  Stamp: 0xc7065970

  Machine name: PC
  UID: 1000
  GID: 1000

  MOUNT V1 EXPORT appeal of the NFS client
  Identification information Flavor: AUTH_NULL (0)
  Length: 0

  It seems that the credentials of NFS Client are not correct.  How can I change the flavor of AUTH_UNIX and the UID and GID to 1000?

  Hello VDAEMP,

  As Eddie and Sudarshan has said, the Microsoft Answers community focuses on issues and problems related to the consumer environment. Please join the public IT pro TechNet forums below:
  TechNet - Windows Server
   
  Thank you

• Home Vista premium: KB978338 fails with the error code 80004005

  Cannot install other updates windows update screws. Impossible to find answers to this specific problem, all the links seem to point to XP or windows 7

  Went to the Microsoft site and just tried to download and install just the fix KB978338, watched as she worked, system has rebooted with what looked like 266/266/registry component machine appearing on the screen just after the message of the HP bios and just before loading windows.  The PC then realized... Updates not configured correctly - returning changes.

  Seem to be stuck in this loop that KB978338 will not install and stops all other updates installation as all fails with the error code 800F0826.

  Hi gbislay,

  I think that you are able to get on the desktop after changes have been restored.

  Step 1: Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  Step 2: Download and run the system update tool. This tool runs an ad hoc analysis of inconsistencies that might prevent future maintenance operations.

  The system update tool

   

  Step 3: Clean boot the computer

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Important: n ' forget not to put the computer to follow normal start-up step 7 in the link.

  Step 4: Disconnect all external devices (printers, scanner, USB (universal serial bus) readers, etc...) Except the mouse and keyboard and then try to install the updates.

  You can see the steps outlined in the article below, which deals with a similar question

  Windows Update error 800f0826

  The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7

  Service pack Windows Vista and Windows Server 2008 install fails with error 0x80004005

   

  Note: Steps to solve the problem of Windows Update for Windows 7 is valid for Windows Vista.

  Thanks and greetings
  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************
  Visit our Microsoft answers feedback Forum and let us know what you think.

• OPatch failed with the error code 72

  Hello
  
  I try to apply the patches to the database, whenever I try to use opatch I get error below.
  ----------------------------------------------------------------------------------------------------------------------------------
  
  [oragold@apps OPatch] $ opatch lsinventory
  Citing O Patch 10.2 .0.2.0
  
  Interim fix installer Oracle version 10.2.0.2.0
  Copyright (c) 2005, Oracle Corporation. All rights reserved...
  
  
  Oracle home: /u02/oracle/PROD/db/tech_st/10.2.0
  Inventory Center: / home/oragold/oraInventory
  from: /etc/oraInst.loc
  OPatch version: 10.2.0.2.0
  YES version: 10.2.0.2.0
  YES location: /u02/oracle/PROD/db/tech_st/10.2.0/oui
  Location of the log file: /u02/oracle/PROD/db/tech_st/10.2.0/cfgtoollogs/opatch/opatch-2009_Mar_30_16-28-49-EST_Mon.log
  
  List of houses on this system:
  
  Name of the House = OraDb10g_home1, rental = "/ u02/oracle/PROD/db/tech_st/10.2.0/db/inventory/prereqs".
  Failure of the load of the inventory... OPatch failed to load the inventory for the given Oracle Home.
  Possible causes are:
  Oracle Home Dir. path does not exist in the Central stock
  Oracle Home is a symbolic link
  The Oracle Home inventory is corrupted
  Failure of the LsInventory Session: OracleHomeInventory::load() gets oracleHomeInfo null
  
  OPatch failed with the error code 72

  Hello

  Failure of the load of the inventory... OPatch failed to load the inventory for the given Oracle Home
  The Oracle Home inventory is corrupted

  Please, check the following:

  (1) you have the last installed opatch
  (2) orainst.loc exists and it is not corrupted
  (3) inventory_loc in orainst.loc points to the good oraInventory
  (4) oraInventory exists and it is not corrupted
  (5) the local inventory exists and it is not corrupted

  If missing oraInventory, restore it from a backup, or please refer to recreate.

  Note: 274526.1 - how to download and install opatch (generic platform).
  https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=274526.1

  Note: 295185.1 - how to recreate the Global oraInventory
  https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=295185.1

  Note: 360079.1 - Global inventory and Local explained
  https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=360079.1

  Note: 754667.1 - "Opatch Failed With Error Code 73' /var/opt/oracle/oraInst.loc pointing oraInventory bad location
  https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=754667.1

  Kind regards
  Hussein