Dungeon of "system restore completed successfully" message appear, wheb ever I turn on my netbook.

Similar Questions

• HP Pavilion 15 laptop: HP Pavilion 15 laptop: System Restore completed successfully. The problem is not resolved.

  About 3-4 weeks ago, my computer found himself in a reboot loop. I was not online at the time where he was probably not due to an update.

  After going on the HP Web site, it was first suggested that the issue could be overheating due to dust. I followed the instructions but it does not work.

  Diagnosis is directed which has determined that there are no problems with the hardware or memory.

  Then the site suggested that I do a Refresh system or a system restore. I tried the cooling system. It did not work.

  I contacted HP Tech Support hotline and they told me to update the drivers. Drivers cannot be updated / installed (by me at least) in Safe Mode, if it does not work.

  Then told me the only choice I had was to do a Factory Reset/System Restore.  After the purchase of an external HARD drive and backup of my files, I tried to do the factory reset. I received a prompt to insert a disc, but computer did not come with a disc. If it does not work.

  Then I was told by support that I had to buy "recovery disc" or a new copy of Windows 8.1. Technical support said it was the only way to solve the problem. By chance, I found another video that shows how to access recovery tool of real system since menu troubleshooting at start-up.

  System recovery completed successfully. However, while creating the new installation of Windows 8.1 (implementation name, country, favorite colors, e-mail etc.) the original reboot loop problem started. If it does not work. Even worse, because the Windows installation is incomplete - and can complete because of the reboot loop - I can access more fashion is safe.

  Any help or advice would be greatly appreciated. Miracles would net you have my firstborn (eat too in any case).

  Okay, so I had to take the machine to a technician. What she said is that it was certainly not a hardware problem. Its best estimate is that my computer As witn infected a Trojan horse which subsequently transferred, entered the BIOS and corrupted partition.

  Short history of Tech, they fixed by redoing the BIOS and installing a new copy of Windows 8.1. I asked about the other options that I received. She explained that a remote technical support could not fix the problem, nor recovery disks could solve the problem.

  My advice to all who encounter such a complex problem, when you contact HP Support don't forget to request contact information for a local HP technician, licensed (I only asked for this in desperation by accident). Just in case your problem is not easily diagnosed or solvable, it might just save you some time, money and spare you confusion.

  As for how I got infected with the Trojan possible in the first place, no idea. The only thing I can think is that I've opened an e-mail looking strange but legitimate to someone I didn't know. However, it was about 6 months ago and the problem started a month before, so I at least do not know if there is a link. However, it is always good advice not to open strange e-mails. Note that the technician did say that even if I had Norton installed, it would not be able to automatically detect the problem. (I wonder if I called Norton technical support if they could have helped or pointed me in the right direction faster. But even once, any comments or information I received from HP technical support gave usable clues. "And refresh the system that has been proposed did uninstall Norton).

  So, I have a computer to work again. I hope this info can be useful to someone and avoid frustration. Thanks to everyone who took the time to read my post.

• How do a success message appears after a process completes successfully with a corporate theme

  
  Hello.

  I have Oracle Apex 4.0 and Oracle 10

  The problem is that the doesn´t of success message appears when the process ends.
  The cause is because I have a corporate theme and if I change the 'Model of Application default level' page template for another page, for example "a level tab sidebar left' model, the message is displayed correctly, but there is a menu of list and it appears so when the mouse passes over a picture, and if I choose the second model the menu disappears.

  What could I do for the two displayed?

  Thank you.

  Hi Vilela,

  Vilela says:

  Hello.

  I have Oracle Apex 4.0 and Oracle 10

  The problem is that the doesn´t of success message appears when the process ends.
  The cause is because I have a corporate theme and if I change the 'Model of Application default level' page template for another page, for example "a level tab sidebar left' model, the message is displayed correctly, but there is a menu of list and it appears so when the mouse passes over a picture, and if I choose the second model the menu disappears.

  What could I do for the two displayed?

  Thank you.

  If please mention the topic from which you created the custom theme, or is it a custom built theme.

  Please change your Page template-> sub-model section-> success Message. View the section HTML markup.

  Please view the 'Body' of the Page template section HTML markup as well.

  If the 'success' Message contains the correct markup (to compare with 'A level tabs - left Sidebar'), then compare the 'Body' of the model section and make sure she has the #SUCCESS_MESSAGE substitution string # after the header tag.

  You can ask for help on issues of the HTML and the template more than whoever designed your model.

  I hope this helps!

  Kind regards

  Kiran

• I install Windows Media Player 11 on Dell Dim/3000, I received the message to turn the system restore. How do I do that? Turn on SR, where is the button?

  I install Windows Media Player 11 on Dell Dim/3000, I received the message to turn the system restore. How do I do that?  Turn on SR, where is the button?  How can I enable the system restore?  I want to install Window Media Player 11 and this is the message I received. WMP 11 I need to re install and everything about the need to restore the system to have anyting to install?  I need HELP as soon as POSSIBLE. I'll wait for a response.  I can't play all the music that I recently downloaded.

  I received the message that the system restore is disabled.  How do I turn it on, turn so I can install WMP 11 new or I need to reinstall the latest version of WMP11 again?  Help ASAP, I'll wait for a response.

  Hi AnnieStewart,

  1. What happens when you try to listen to music downloaded in Windows media player 11?
  2. What is the complete error message you receive when installing Windows media player 11?

  See the articles to turn on system restore on the computer.

  How to turn on and off on system restore in Windows XP

  http://support.Microsoft.com/kb/310405

  Steps of troubleshooting for problems when you try to use the System Restore tool in Windows XP

  http://support.Microsoft.com/kb/302796

• Did a system restore complete with built-in recovery partition on the hard drive, the recovery went well, but the computer is still slow and freezing.

  Original title: computer always slow and freezing after clean install

  It is a compaq 2007 desktop running windows vista premium, I work on it for a friend, they said he was running slow and freezing up all the time so I just went ahead and did a system restore complete with built-in recovery partition on the hard drive, the recovery went well but still have the same problems with the computer being slow and freezing up. any help would be appreciated thanks.

  Hello

  
  Step 1: I suggest you try the steps in the Sub articles to solve the problem of vista performance.
  http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance
  http://Windows.Microsoft.com/en-us/Windows-Vista/get-computer-speed-and-performance-information
  http://Windows.Microsoft.com/en-us/Windows-Vista/get-maximum-performance-from-Windows-Vista-from-Windows-Vista-inside-out
  Step 2: You can also check if the problem persists in the clean boot state.
  
  Put your boot system helps determine if third-party applications or startup items are causing the problem.
   
  Try the steps in step 1 in the article to put your computer in clean boot mode.
  http://support.Microsoft.com/kb/929135

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• I get the message "system restore has been transformed to group policy. to turn on system restore contact your domain administrator"does that mean

  I get the message "system restore has been transformed to group policy. to turn on system restore contact your domain administrator"does that mean

  This means that the function of system restore has become disabled, possibly through a group policy.

  To re - activate:

  1. click on start, run and type regedit.exe, and then press enter

  2. navigate to the following key:

  HKEY_LOCAL_MACHINE-Software-policies-Microsoft-Windows NT------SystemRestore

  In the right pane:

  1 delete the value DisableConfig
  2 delete the value DisableSR
  3. exit the registry editor.
  4 reboot.

  In Windows XP Professional, you can accomplish the above by using Group Policy Editor.

  1. click on start, run and type GPEDIT. MSC
  2. navigate to this path:

  Computer configuration-> administrative templates-> system-> system restore

  3. set turn off unconfigured system restore
  4. set the disable configuration not configured
  5. exit the Group Policy Editor
  6 reset.

• After many attempts computer will not allow the system restore. Received message is... Unspecified error occurred restoring the system durning

  After many attempts computer will not allow the system restore. Received message is... Unspecified error occurred restoring the system durning

  Hello

  If you use Norton, which could interfere with the restoration of the system.

  Disable Norton while doing your system restore.

  See you soon.

• Vista SP1 does not update problems and System Restore returns a message "system restore was not entirely successful. File system and the setting of your computer has not changed"with the error code (0x80071AA7)

  0rignal title: Vista SP1 didn't update problem

  So, recently, I was on my computer of gf and noticed she had some updates, it could use his computer which included the SP1 update.  So I went through the process trying to update his computer and he has been a disaster and have had many problems and seems to have tried everything.  It has a Dell inspiron 1525 and has no CD and no key for its program of Vista.  I burned a Vista recovery disk and tried troubleshooting by using that, but have not had much luck.  When I use the Startup Repair tool there is no nothing.  So I tried to use the restore of the system with the Description of "install: Windows Vista Service Pack 1.  He had a restore point saved just before I tried to update to SP1.  Whenever I chose this method, it's but the whole process then in the end it says:

  "System restore was not entirely successful.  File system and the setting of your computer have not changed. "

  then he begins to list the details with the error code (0x80071AA7) and then gives me the option to close or 'Run System Restore"once again that is an endless loop, because I just end up with the same error each time.  If anyone has had this problem and bring myself through it.  I don't want to reinstall windows because it seems simply ridiculous and plus that she a lot of pictures on his computer and I want to get rid of those.

  If you need more information please let me know and evil provides everything I can

  Hello
   
  Follow the steps and check if the problem persists.
   
  Step 1:
   
  I suspect that your security program may be responsible for this. I would suggest you temporarily disable all security software and try the system restore.
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
   
  Note : Antivirus software can help protect your computer against viruses and other security threats.  In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  Step 2:
   
  As for installing updates is concerned, I you should install them after you put your computer in aclean boot State. There could be a third-party software in conflict with updates. Clean boot helps eliminate these conflicts.
   
  Note: Restart your machine as usual by following step 7.
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• wwhy does keep system restore with the message "an unspecified error occurred during system restore.

  Any date, I chose, whenever I try a system restore, I always get this message-"an unspecified error occurred during system restore", why?

  Event Viewer reports

  1. normally, when an error occurs on your computer looking in Event Viewer should be your starting point to find a solution. More related system errors are recorded and get an exact copy of the relevant report is important. Unfortunately, is not easy to understand reports and most of the users computer need help with their interpretation. I have to say later interpretation.

  2 Event Viewer includes three main newspapers of Windows. Here's the Application, security, and system. For purposes of troubleshooting system is by far the most important.

  3. to access the system log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window select Windows and the system logs. Place the cursor on the system, right click and select filter current log. Check the front of the error and click OK and see you only reports errors. Click the Date and time column header to sort. You may need to click a second time to see the last report above.

  4. a tip for posting copies of error reports! Run Event Viewer and double-click the error you want to copy. Select the Details tab and check the box in front of the XML view. Click the copy button to place a copy in the Clipboard and close Event Viewer. Now start your message and paste it into the body of the message. Make sure that it is the first dough right out of the event viewer.

  5. He cautioned against three types of reports, information, and reports errors. In most situations, it is the error reports that offer the best information but sometimes WARNING reports provide useful clues.

  6. all reports have stamps date and hour and when troubleshooting, it is important to focus on the latest reports. Reports of studies from the point when the computer is started, and then check if a similar report appeared in the previous session. If errors do not repeat investigation as to why they happen is wasted effort.

  7. in the individual reports the most important information is the event ID and Source such as these help when looking for help on the internet. The description is just as important and copy the exact text to use as search criteria greatly helps achieve better results when using Google. Not paraphrase descriptions when other people asking for help.

• lack of system restore - the animated icon appears to indicate the data collection, but then it stops

  When I try the system restore, I am able to choose a restore date. I then accept the details and press next to accept. The animated icon appears to indicate the data collection, but it then stops. Therefore, the system is not shut down and restart (which I think it is supposed to do). If you try to select another date that is the same thing. any ideas? I think that I was previously exposed to a system whose consequences restore virus had to hide all my files. I'm still not programe files on the start menu.

  Hello

  Method 1: I suggest you to run the Microsoft safety scanner to ensure that the system is free of infection by the virus:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: you can lose data if the parser detects a corrupted data file.

  Method 2: Run the SFC scan and check if system files are intact:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 3: You can also try restoring the system to the Windows recovery environment (WinRE):

  What are the system recovery options in Windows Vista?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

• On the system restore running the message says "system not restored" and error 0 x 80070005 is given - how to solve this problem & get sys restore running again?

  Original title: on the restoration of the system running the message says "system not restored" and error 0x80070005 is given - how to fix & get sys restore running again?

  A ran the system restore, it goes through the entire process, then said "System Restore does not restore the" files etc, nothing has been changed.

  Error 0 x 80070005
  All + ve help would be appreciated

  Hi Rodianna,

  I know you've tried some of these steps... but try this exactly showing how. First one marked 'reply' then the following below this one.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/Windows-7-system-restore-error-code-0x80070005/11c3f465-559d-4F35-B8B7-9bc010972247

  Let me know what happens.

  B Eddie

• On the boot system is "system restore is scanning" message and then it opens the Recovery Manager

  When I try and start my other Hp laptop it says to the system restore is looking for errors, then it passes to the Recovery Manager. I want to use the system recovery. File backup program it tells me that there is currently not enough free space on the system partition for temporary storage during compression. You must free space on the system partition to continue the task. I'm trying to save up to my external hard drive which has 930 GB of free space is a way to simply copy the hard drive the computers together? All my children pictures are on this laptop does - what should I do to save my files? I have also a 2nd laptop the exact same model that works is there a way I can copy files to it. They are 449WM HP G71 and use 7 64 windows operating systems. Is there a way I can connect two laptops, and then access that it wont startup files. It is the important gathering I have video of my daughter being born so that at least 1 photo of her every wek since she was born any advice would be greatly appreciated

  Hello

  I suggest buying a USB SATA docking station and backup all needed files on the external hard drive through the work laptop...

  http://www.pcworld.co.uk/gbuk/cnm-hard-drive-docking-station-for-2-5-3-5-sata-internal-hard-drives-01992148-pdt.html?srcid=867&xtor=AL-50&istCompanyId=9a35962d-802d-4e67-9721-0a3328ca1f02&istItemId=mrpwxxx&istBid=t

  All you have to do is remove the hard drive work, adapt it to the docking station and connect the station to the laptop. It will work as a drive external hard usb.

  When you have finished the backup, create an image backup disc system on the work laptop and use it to restore the other laptop...

• Name of the application is not running, the success message appears always

  Hello

  I use 11.1.2 and config application form in formsweb.cfg as below, the problem is when I call this link... I show the success message (never call application form, always see the success message wile I change the name of the application that never).

  any suggestion?

  [LOCALjpi]

  applet_name = FormsID

  jpi_download_page = http://w-CPC-IT-018.CPC.gov.AE:9001/Forms/Java/Download/JDK-6u25-Windows-i586.exe

  jpi_classid = clsid:CAFEEFAC-0016-0000-0017-ABCDEFFEDCBA

  jpi_codebase = http://Java.Sun.com/products/plugin/AutoDL/jinstall-1_6_0-Windows-i586.cab#version=1, 6,0,17

  jpi_mimetype = application/x-java-applet

  separateFrame = FALSE

  width = 1166

  height = 780

  colorScheme = titanium

  pageTitle = TEST

  UserID=usename/Password@Conn

  Form=D:\Project\apps\Forms\menu_new.FMX

  WebUtilLogging = off

  WebUtilLoggingDetail = normal

  WebUtilErrorMode = alert

  WebUtilDispatchMonitorInterval = 5

  WebUtilTrustInternal = true

  WebUtilMaxTransferSize = 16384

  imageBase codeBase =

  splashScreen = Loading.gif

  enableJavascriptEvent = true

  Archive = frmall.jar, laf_11112.jar, Jacob.jar, frmwebutil.jar, icons.jar, SimpleAppletBrowser.jar, jdic.jar

  WebUtilArchive = frmwebutil.jar, jacob.jar, frmall.jar, lablediconbutton.jar

  Hello

  This community is to discuss specific issues of Oracle Application Server, you can publish this request in for a better response:

  Forms

  Kind regards

  Prakash.

• System Restore has been disabled by group policy. Turn on domain contact adminastrator.

  Like many downtown security, firewall, and windows defender does not work says pretty much the same thing that I need to contact adminastrator due to group policy. What I am sappose to when I can not turn all of this as well not be able to use my system restore? Please help me.

  "glitter69" wrote in message news: 713cf1f5-1334-47 3 - 86 5-196ed3d32ab3...
  > So the Security Center, firewall, and says that windows defender does not
  > about the same thing that I have to contact the adminastrator due to
  > Group Policy. What I am sappose to when I can't turn it on as
  > well as not being able to use my system restore? Please help me.
   
   
  It sounds as if your PC has been hacked - bad! (Alternatively, according to the)
  How you look at these things).
  You almost certainly have a significant infestation of malicious software, which, even if
  cleaned up, could still accommodate unsuspected backdoors.
   
  My recommendation would be to backup your data on an external drive, and
  which is verified by a decent anti-virus, reformat and reinstall
  the operating system on your system.
   
  --
  Noel Paton
  CrashFixPC
   
  Nil Carborundum Illegitemi
  www.crashfixpc.co.UK
   
   

• Im having problems with my computer. My computer needs to install the important updates 13 but every time is about to complete, a message appears saying error found and I don't know how to fix this problem.

  I did not any changes to my computer.
  This "error" is displayed whenever the computer tries to update.
  It says code XXX.
  And I like many updates that says they don't have to settle.

  Hello

  You must always specify the actual error codes.

  Try this 1st to see if it helps, and it should:

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220/

  ------------------------------------------------------

  If necessary :

  Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
  or the update itself - double click a view more information (or click top then discovers on the right)

  Those who will take you to a page where you can download the update.

  Or go here and the KBxxxxxx number to download it.

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  If you get an error Installer install this version:

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------
  Because these are all Office updates you might get more information if necessary in the Agency of those groups that
  may have experienced the same problem.

  Office newsgroups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Microsoft.public.office.misc discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.