RMAN restore to different host

Hello

What do restore via rman, (not dual)

If I startup nomount another instance with the name of the different database.
can I perform rman full restore to a different database? (I bring controlfile first and data files, I'll also put the rman backups in the same location)

or

Is it necessary to have same db and the instance name?

Right. Because the Controlfile name must match the name of the database.

Tags: Database

Similar Questions

Backup RMAN restore through different versions
Operating system: Solaris 10

I have a RDBMS only 11.2.0.3 Installing software in a server-> server B
I have my source DB running on another server, which is the version 11.2.0.1.0-> server A

Is it possible to RMAN backup the source DB version 11.2.0.1.0 and use it create a DB of 11.2.0.3.0 to Server B?

Is the same as 10.2.0.1.0 to 11.2.0.3.0?
Hello again;

11.2.0.1 doesn't have a higher House. It needs to be updated.

Frequently asked Questions about the restoration or duplication between different Versions and platforms [ID 369644.1]

Best regards

mseberg

ORA-19870: you try to restore the database on a different host with rman...
When I try to restore datafile 1 with this script

RUN
{
SET up this THAT TIME = "to_date('2012-01-01:00:00:00','YYYY-MM-DD:HH24:MI:SS')";
RESTORE THE FILE DATA 1;
}

---------------------------
ORA-19870: error reading backup total /mnt/hgfs/2012_01_01/o1_mf_nnndf_TAG20120101T050005_7hzm1qc4_.bkp
ORA-19612: datafile 1 not restored because of missing or corrupted data
switch to the previous backup

--------------------------

RMAN > RESTORE DATAFILE 1 to this THAT TIME = "to_date('2012-01-01:00:00:00','YYYY-MM-DD:HH24:MI:SS')" Overview.

From restoration to January 10, 12
using channel ORA_DISK_1
using the ORA_DISK_2 channel
using the ORA_DISK_3 channel

RMAN-00571: ===========================================================
RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
RMAN-00571: ===========================================================
RMAN-03002: failure of the restore command at the 13:11:19 10/01/2012
RMAN-06026: some targets not found - abandonment of restoration
RMAN-06023: no backup or copy of datafile 1 found to restore

--------------------------------

RMAN > LIST BACKUP OF THE DATA 1 Summary file;

Backup list
===============
S LV TY Device Type delay #Pieces compressed #Copies Tag key
------- -- -- - ----------- --------------- ------- ------- ---------- ---
40969 A DISC 1 1 JANUARY 12 1 no TAG20120101T050005

----------------------------------

and when I write "backup list '; output is here where I can see datafile 1...

Time of accomplishment BS key Type LV size device Type elapsed time
------- ---- -- ---------- ----------- ------------ ---------------
40969 full 32,28 G DISC 02:07:15 1st January 12
BP key: situation 28432: AVAILABLE Tablet: NO Tag: TAG20120101T050005
Part name: /mnt/hgfs/2012_01_01/o1_mf_nnndf_TAG20120101T050005_7hzm1qc4_.bkp
List of defined backup data files 40969
Name of file LV Type cash SNA cash time
---- -- ---- ---------- --------- ----
25035430765 full 1 1 January 12 /oradata1/ISPRODDB11/datafile/o1_mf_system_331jc17w_.dbf
2 full 25035430765 /oradata1/ISPRODDB11/datafile/o1_mf_undotbs1_331jc19r_.dbf 1 January 12
4 integer 25035430765 /oradata1/ISPRODDB11/datafile/o1_mf_users_331jc1b2_.dbf 1 January 12
35 full 25035430765 /oradata1/ISPRODDB11/datafile/sap.dbf 1 January 12
56 full 25035430765 /oradata2/ISPRODDB11/datafile/TBS_UYS05.dbf 1 January 12

------------------------------

and the incarnation of the list;

RMAN > LIST INCARNATION;

List of Incarnations of the database
DB key Inc key STATE ID DB name DB reset reset time SNA
------- ------- -------- ---------------- --- ---------- ----------
1 1 ISPRODDB 4210711725 PARENT 1 19 DECEMBER 06
2 2 ISPRODDB 4210711725 RUNNING 564488 26 APRIL 07

I m able to restore all data files but datafile 1 (system) and 3 (sysaux)... I don't know what to do...
828193 wrote:
When I put until 2012-01-01 12:00

From back to January 10, 12
using channel ORA_DISK_1
using the ORA_DISK_2 channel
using the ORA_DISK_3 channel
RMAN-00571: ===========================================================
RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
RMAN-00571: ===========================================================
RMAN-03002: failure of the command recover at the 15:28:53 10/01/2012
RMAN-06094: datafile 1 must be restored.

so, if I want to restore a datafile to 2012-01-01 00:00 I need previous backupset? right?

Fix.
Has done restoration work when you set the until to 2012-01-01 12:00?

Brgds
Johan

Restore rman 10g with different data file name.

Hi all.
I am successful restoration sauvegardΘ (Veritas Netbackup) one 10.2.0.5 database.
The original database was a 2 node Rac 10.2.0.5 on asm without OMF.
I'm trying to restore on another host with the same version 10.2.0.5 and even platform (Sparc Solaris), but single instance database.
RMAN complete successfully, the restore, but the names of the data files are different from what is written in the controlfiles so
the database can go up but not open.
It is not only a question of path, the look of database for a file of data like this:
System.261.622119076 (the right way of the asm source environment)
but instead, rman restore this data as a file
o1_mf_system_2ixfh90q_.dbf
This seems a name OMF.
I don't understand the reason.

Can I use the command set newname for each data file?

Thanks in advance.

I restored the database successfully.

In init.ora I don't use the setting as a CONVERT.

I don't know why but I had to restore archived log first. something like

DESTINATION ARCHIVELOG TO GAME ' / u01/app/oracle/oradata/PDM/arch;

RESTORE ARCHIVELOG ALL;

then:

RMAN > RUN

{

SBT ALLOCATE CHANNEL t1 TYPE of AIRCRAFT;

Restore controlfile;

}

After this:

editing of database startup

and I extracted the list of data files:

+ DATA /...

+ FLASH...

then

change the editing of the database;

RUN {}

SBT ALLOCATE CHANNEL t1 TYPE of AIRCRAFT;

SBT ALLOCATE CHANNEL t2 TYPE of AIRCRAFT;

SBT ALLOCATE CHANNEL t3 TYPE of AIRCRAFT;

SBT ALLOCATE CHANNEL t4 TYPE of AIRCRAFT;

the value of newname for datafile 1 to ' / u01/app/oracle/oradata/PDM/system.261.622119067';

St newname for datafile 2 to ' / u01/app/oracle/oradata/PDM/undotbs1.262.783621567';

the value of newname for datafile 3 to ' / u01/app/oracle/oradata/PDM/sysaux.263.622119149';

the value of newname for datafile 4 to ' / u01/app/oracle/oradata/PDM/undotbs2.265.622119189';

the value of newname for datafile 5 to ' / u01/app/oracle/oradata/PDM/users.266.622119281';

the value of newname for datafile 6 to ' / u01/app/oracle/oradata/PDM/gcs_data.272.622547291';

the value of newname for datafile 7 to ' / u01/app/oracle/oradata/PDM/gcs_indx.275.622548237';

the value of newname for datafile 8 to ' / u01/app/oracle/oradata/PDM/gcs_lob.276.622548403';

the value of newname for datafile 9 to ' / u01/app/oracle/oradata/PDM/pdm_data.273.622547535';

the value of newname for datafile 10 to ' / u01/app/oracle/oradata/PDM/pdm_indx.274.622547861';

the value of newname for datafile 11 to ' / u01/app/oracle/oradata/PDM/tbs_htmldb.277.623757195';

the value of newname for datafile 12 to ' / u01/app/oracle/oradata/PDM/w3docdb_data.278.623757345';

the value of newname for datafile 13 to ' / u01/app/oracle/oradata/PDM/w3docdb_index.279.623757371';

the value of newname for datafile 14 for ' / u01/app/oracle/oradata/PDM/w3docdb_lob.280.623757407';

the value of newname for datafile 15 to ' / u01/app/oracle/oradata/PDM/aspect_data.295.636897363';

the value of newname for datafile 16 t to ' / u01/app/oracle/oradata/PDM/pdmct.319.650450905';

the value of newname for datafile 17 to ' / u01/app/oracle/oradata/PDM/pdmct.320.650451825';

the value of newname for datafile 18 to ' / u01/app/oracle/oradata/PDM/pdmpm.321.660676573';

the value of newname for datafile 19 to ' / u01/app/oracle/oradata/PDM/undotbs3.327.783526691';

the value of newname for datafile 20 to ' / u01/app/oracle/oradata/PDM/pdmed_data.330.787137071';

the value of newname for datafile 21 to ' / u01/app/oracle/oradata/PDM/pdmed_idx.329.787137111';

until ' to_date ('2015 - 12 - 02:13:00:00 ',' yyyy-mm - dd:hh24:mi:ss');

RESTORE THE DATABASE;

switch datafile;

recover the database;

}

at database startup has tried to recreate the DATA + redolog in and + FLASH as well

I've deleted all the possible redolog except the redolog that have been verified as CURRENT or ACTIVE

(I don't understand why in montage mode I have active and current redolog).

SELECT GROUP #, ARCHIVED, STATUS FROM V$ LOG;

ALTER database drop logfile group x.

For the rest of the redolog I used:

change the database file rename '+ DATA/pdm/onlinelog/group_1.257.622119063' to ' / u01/app/oracle/oradata/PDM/group_1a ";

change the database file rename '+ FLASH/pdm/onlinelog/group_1.257.622119065' to ' / u01/app/oracle/oradata/PDM/group_1b ";

change the database file rename '+ DATA/pdm/onlinelog/group_5.259.622119065' to ' / u01/app/oracle/oradata/PDM/group_5a ";

change the database file rename '+ FLASH/pdm/onlinelog/group_5.259.622119065' to ' / u01/app/oracle/oradata/PDM/group_5b ";

change the database file rename '+ DATA/pdm/onlinelog/group_7.269.622123949' to ' / u01/app/oracle/oradata/PDM/group_7a ";

change the database file rename '+ FLASH/pdm/onlinelog/group_7.263.622123951' to ' / u01/app/oracle/oradata/PDM/group_7b ";

change the database file rename '+ DATA/pdm/onlinelog/group_8.270.622123951' to ' / u01/app/oracle/oradata/PDM/group_8a ";

change the database file rename '+ FLASH/pdm/onlinelog/group_8.264.622123951' to ' / u01/app/oracle/oradata/PDM/group_8b ";

alter database disable change tracking block;

change the database open.

Duplication duplicate a database with RMAN, different host database different withou
Hello

I want to duplicate a database with RMAN, different host, a different database without RMAN Duplicate Technic.

I HOST1 with a database DB1 and
HOST2 with a DB2 database

I have a complete backup of the DB1 in host HOST2. How can I use this backup to clone the database?

Thank you
see the links: -.
http://kamranagayev.WordPress.com/2010/03/29/RMAN-video-tutorial-series-performing-disaster-recovery-with-RMAN/ (Video Tutorial)
http://oracleinstance.blogspot.com/2010/08/disaster-recovery-using-RMAN-demo.html
http://gavinsoorma.com/recovery-scenarios/

RMAN restore fails

friends,

I'm trying to restore database on different hosts for these days, and it fails to error below and continues to restore.
size of DB is TB so I have to be careful before trying again...

Host: linux
DB: 11 GR 2

Restoration of output*:
Restoration finished in February 1, 13

RMAN-00571 =.
RMAN-00569 = following Message of ERROR stack
RMAN-00571 =.
RMAN-03002: failure of the switch control 01/02/2013
ORA-19563: file header validation failure

Complete recovery manager

Restore script: *
Run {}
Restore automatic backup controlfile;
SQL "alter database mount";
the value of newname for datafile 'ABC' "XYZ".
"
"
"
CONFIGURE CONTROLFILE AUTOBACKUP
SET UP THE DEVICE TYPE DISK PARALLELISM 2;
restore the database check readonly;
switch datafile;
recover the database check readonly;
}

quick thinking?

Details of the DB

Hello;

I'm conflict thinking with your "set newname. Perhaps get it back has a conflict with one of the file names.

Here's an example of how to do this:

restore_test.sh

echo "Starting RMAN..."
$ORACLE_HOME/bin/rman << EOF

CONNECT TARGET /
STARTUP NOMOUNT;
SET DBID 3754763357; #DBID of PROD database

RUN
{
   ALLOCATE CHANNEL c1 DEVICE TYPE disk format '/u03/oradata/RCATALOG_rman';
   RESTORE CONTROLFILE FROM '/u03/oradata/RCATALOG_rman/sb_t790762003_s85_p1';
   ALTER DATABASE MOUNT;
   SET NEWNAME FOR DATAFILE 1 TO '/u01/app/oracle/oradata/RECLONE/system01.dbf';
   SET NEWNAME FOR DATAFILE 2 TO ' /u01/app/oracle/oradata/RCATALOG/sysaux01.dbf';
   SET NEWNAME FOR DATAFILE 3 TO '/u01/app/oracle/oradata/RECLONE/undotbs01.dbf';
   SET NEWNAME FOR DATAFILE 4 TO '/u01/app/oracle/oradata/RECLONE/users01.dbf';
   SET NEWNAME FOR DATAFILE 5 TO '/u02/oradata/RECLONE/rman02.dbf';
   SET NEWNAME FOR DATAFILE 6 TO '/u02/oradata/RECLONE/things01.dbf';
   SET NEWNAME FOR DATAFILE 7 TO '/u02/oradata/RECLONE/otn01.dbf';
   SET NEWNAME FOR DATAFILE 8 TO '/u01/oradata/RECLONE/app_idx01.dbf';
   SET NEWNAME FOR DATAFILE 9 TO '/u01/oradata/RECLONE/app_dat01.dbf';
   SET NEWNAME FOR DATAFILE 10 TO '/u01/app/oracle/oradata/RECLONE/audit_aux01.dbf';
   SET NEWNAME FOR TEMPFILE 1 TO '/u01/app/oracle/oradata/RECLONE/temp01.dbf';
   RESTORE DATABASE;
   SWITCH DATAFILE ALL;
   RECOVER DATABASE;
   release channel c1;
}
ALTER DATABASE OPEN RESETLOGS;

exit
EOF

Best regards

mseberg

RMAN, restoration of ASM no - asm environment!

Dear friends,
WE are running Oracle 11 GR 2 CARS as our PRODUCTION server. also, we have a single instance, DATAGUARD, where production data are replicated.
On the end DATAGUARD, we take a weekly full backup RMAN. My db_name is 'isldb '.
Now I want to restore the backup, RMAN COMPLETE the DATAGUARD server to a new server NO - ASM using file system normal... For this reason, I have to follow the procedure below:
(1) take RMAN full backup of DATAGUARD END as a stage to mount and store it on ' / rmanback' file. I use the below taken backup script:
Run {}
allocate channels d1 device type disk format ' / rmanback/isl/$TODAY/df_%U_%T';
allocate channel device type d2 disc format ' / rmanback/isl/$TODAY/df_%U_%T';
backup database effective additional 0 CHECK the LOGIC AS BACKUPSET COMPRESS;
backup format ' / rmanback/isl/$TODAY/controlfile.ctlbk' (current controlfile);
backup format ' / rmanback/isl/$TODAY/spfile.spbak' (spfile);
ARCHIVELOG backup all;
output channel d1;
output channel d2;
}
(2) the transfer of the rman backup complete on a remote server on the same ' / rmanback' file.
(3) in the new server, I take the scene nomount database using a spfile (spfile has a single entry: 'DB_NAME = isldb')
(4) then I restore the controlfile successfully:
[oracle@PRIM ~] target rman $ /.
Recovery Manager: release 11.2.0.3.0 - Production Wed Aug 20 16:01:21 2014
Copyright (c) 1982, 2011, Oracle and/or its affiliates. All rights reserved.
connected to target database: ISLDB (unassembled)
RMAN > restore controlfile to ' / rmanback/isl/20140810_181405/controlfile.ctlbk';
From restoration to 20 August 14
using the control file of the target instead of recovery catalog database
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID = 332 type device = DISK
channel ORA_DISK_1: restore the control file
channel ORA_DISK_1: restore complete, duration: 00:00:01
output file name=/u01/app/oracle/oradata/isldg/control01.ctl
output file name=/u01/app/oracle/oradata/isldg/control02.ctl
Finished restore at August 20, 14
(5) to restore the data successfully file using the command below:
run
{
the value of newname for datafile '+ DATA/isldg/datafile/system.298.849413815' to ' / u01/app/oracle/oradata/isldb/system1.dbf';
the value of newname for datafile '+ DATA/isldg/datafile/sysaux.295.849413813' to ' / u01/app/oracle/oradata/isldb/sysaux1.dbf';
the value of newname for datafile '+ DATA/isldg/datafile/undotbs1.296.849413813' to ' / u01/app/oracle/oradata/isldb/undotbs1.dbf';
the value of newname for datafile '+ DATA/isldg/datafile/undotbs2.297.849413815' to ' / u01/app/oracle/oradata/isldb/undotbs2.dbf';
the value of newname for datafile '+ DATA/isldg/datafile/users.299.849413849' to ' / u01/app/oracle/oradata/isldb/users1.dbf';
the value of newname for datafile '+ DATA/isldg/datafile/bu_system_tbs.291.849413617' to ' / u01/app/oracle/oradata/isldb/bu_system_tbs1.dbf';
the value of newname for datafile '+ DATA/isldg/datafile/bu_his_log_tbs.292.849413617' to ' / u01/app/oracle/oradata/isldb/bu_his_log_tbs1.dbf';
the value of newname for datafile '+ DATA/isldg/datafile/bu_index_tbs.293.849413617' to ' / u01/app/oracle/oradata/isldb/bu_index_tbs1.dbf';
the value of newname for datafile '+ DATA/isldg/datafile/bu_image_tbs.294.849413619' to ' / u01/app/oracle/oradata/isldb/bu_image_tbs1.dbf';
the value of newname for tempfile 1 to ' / u01/app/oracle/oradata/isldb/temp1.dbf';
restore the database;
}
RESTORATION came with success, and all data files store in the folder specified with success.
(6) now when I recover the database, then I found the below error:
> SQL > alter database open resetlogs;
ALTER database open resetlogs
ERROR on line 1:
ORA-01157: cannot identify/lock data file 1 - see DBWR trace file
ORA-01110: data file 1: '+ DATA/isldg/datafile/system.298.849413815 '.
> SQL > restore database;
ORA-00283: cool cancelled due to errors
ORA-01610: recovery using BACKUP CONTROLFILE option must be
> SQL > restore database until cancel using backup controlfile;
ORA-00283: cool cancelled due to errors
ORA-01110: data file 1: '+ DATA/isldg/datafile/system.298.849413815 '.
ORA-01157: cannot identify/lock data file 1 - see DBWR trace file
ORA-01110: data file 1: '+ DATA/isldg/datafile/system.298.849413815 '.
Could someone help me please, how can I recover as open my database?

Your archivelog was not "missing." He seems to have a different file name format.

No one can touch «_allow_resetlogs_corruption» action You are now on your own.

Hemant K Collette

RMAN restore to another device Oracle 11 g 1

Hello

I have a big problem. I have on PC running Windows Server 2003 named "Host A" and another Windows Server 2003 "host B".
I made a backup of host A and you want to restore it to host B with the procedure.

Preparation & backup:

          SQLPLUS SYS AS SYSDBA
          SQL>SHUTDOWN IMMEDIATE     
          SQL>STARTUP MOUNT
          SQL>ALTER DATABASE ARCHIVELOG;
          SQL>ALTER DATABASE OPEN;
          SQL>ARCHIVE LOG LIST;
          SQL>ALTER SYSTEM ARCHIVE LOG START;
          SQL>QUIT

          RMAN TARGET /
          RMAN>CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT 
'C:\Oracle-Backup\backup/%T.bkp';

RMAN>CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE 
DISK TO 'C:\Oracle-Backup\controlfile/%F.bkp';


          RMAN>CONFIGURE CONTROLFILE AUTOBACKUP ON;
          RMAN>EXIT;
          

          RMAN TARGET /
          RMAN>BACKUP DATABASE;     // maybe PLUS ARCHIVELOG 
          RMAN>EXIT;

After this I got a Controlfile 9,6 mb and a 1 GB file backup

Then I restored to the second machine:

Microsoft Windows [Version 5.2.3790]
(C) Copyright 1985-2003 Microsoft Corp.

C:\Dokumente und Einstellungen\Administrator>rman

Recovery Manager: Release 11.1.0.6.0 - Production on Mi Mai 16 11:13:33 2012

Copyright (c) 1982, 2007, Oracle.  All rights reserved.

RMAN> quit


Recovery Manager abgeschlossen.

C:\Dokumente und Einstellungen\Administrator>rman target / nocatalog

Recovery Manager: Release 11.1.0.6.0 - Production on Mi Mai 16 11:14:02 2012

Copyright (c) 1982, 2007, Oracle.  All rights reserved.

Mit Ziel-Datenbank verbunden: XXX (DBID=1455796592)
Kontrolldatei der Zieldatenbank wird anstelle des Recovery-Katalogs verwendet

RMAN> shutdown immediate;

Datenbank geschlossen
Datenbank nicht angeschlossen
Oracle-Instance heruntergefahren

RMAN> set dbid 1449626294

Befehl wird ausgef³hrt: SET DBID

RMAN> startup nomount;

mit Zieldatenbank verbunden (nicht gestartet)
Start nicht erfolgreich: ORA-01078: failure in processing system parameters
LRM-00109: Parameterdatei 'C:\PROGRAMME\ORACLE\111\DATABASE\INITXXX.ORA'
 konnte nicht ge+ffnet werden

Oracle Instance ohne Parameterdatei gestartet, um spfile abzurufen
Oracle-Instance gestartet

Gesamte System Global Area     159019008 Byte

Fixed Size                     1331852 Byte
Variable Size                 71306612 Byte
Database Buffers              83886080 Byte
Redo Buffers                   2494464 Byte

RMAN> restore spfile from 'c:\Oracle-Dump\CONTROLFILEC-1449626294-20120306-03.BK
P';

Starten restore um 16.05.12
Zugewiesener Kanal: ORA_DISK_1
Kanal ORA_DISK_1: SID=98 Device-Typ=DISK

Kanal ORA_DISK_1: Spfile wird aus AUTOBACKUP c:\Oracle-Dump\CONTROLFILEC-1449626
294-20120306-03.BKP zur³ckgeschrieben
Kanal ORA_DISK_1: Zur³ckschreiben von SPFILE aus AUTOBACKUP abgeschlossen
Beendet restore um 16.05.12

RMAN> shutdown immediate;

Oracle-Instance heruntergefahren

RMAN> startup nomount;

mit Zieldatenbank verbunden (nicht gestartet)
Oracle-Instance gestartet

Gesamte System Global Area     535662592 Byte

Fixed Size                     1334380 Byte
Variable Size                348128148 Byte
Database Buffers             180355072 Byte
Redo Buffers                   5844992 Byte

RMAN> restore controlfile from 'c:\Oracle-Dump\CONTROLFILEC-1449626294-20120306-
03.BKP';

Starten restore um 16.05.12
Zugewiesener Kanal: ORA_DISK_1
Kanal ORA_DISK_1: SID=208 Device-Typ=DISK

Kanal ORA_DISK_1: Kontrolldatei wird zur³ckgeschrieben
Kanal ORA_DISK_1: Restore abgeschlossen, abgelaufene Zeit: 00:00:03
Ausgabedateiname=C:\PROGRAMME\ORACLE\111\DATA\XXX\CONTROL01.CTL
Ausgabedateiname=C:\PROGRAMME\ORACLE\111\DATA\XXX\CONTROL02.CTL
Ausgabedateiname=C:\PROGRAMME\ORACLE\111\DATA\XXX\CONTROL03.CTL
Beendet restore um 16.05.12

RMAN> alter database mount
2> ;

Datenbank angeschlossen
Freigegebener Kanal: ORA_DISK_1

RMAN> catalog start with 'c:\oracle-Dump\';

Starten implicit crosscheck backup um 16.05.12
Zugewiesener Kanal: ORA_DISK_1
Kanal ORA_DISK_1: SID=208 Device-Typ=DISK
10 Objekte auf _bereinstimmung gepr³ft
Beendet implicit crosscheck backup um 16.05.12

Starten implicit crosscheck copy um 16.05.12
Kanal ORA_DISK_1 wird benutzt
Beendet implicit crosscheck copy um 16.05.12

Suche nach allen Dateien im Recovery-Bereich
Dateien werden katalogisiert...
Keine Dateien katalogisiert

Suche nach allen Dateien, die mit dem Muster c:\oracle-Dump\ ³bereinstimmen

Datenbank kennt Dateiliste nicht
=====================================
Dateiname: C:\ORACLE-DUMP\BACKUPXXX777222642.BKP
Dateiname: C:\ORACLE-DUMP\BACKUPXXX777222669.BKP
Dateiname: C:\ORACLE-DUMP\BACKUPXXX777222949.BKP
Dateiname: C:\ORACLE-DUMP\CONTROLFILEC-1449626294-20120306-03.BKP

M÷chten Sie die obigen Dateien wirklich katalogisieren (geben Sie YES oder NO ei
n)? yes
Dateien werden katalogisiert...
Katalogisierung erfolgt

Liste mit katalogisierten Dateien
=======================
Dateiname: C:\ORACLE-DUMP\BACKUPXXX777222642.BKP
Dateiname: C:\ORACLE-DUMP\BACKUPXXX777222669.BKP
Dateiname: C:\ORACLE-DUMP\BACKUPXXX777222949.BKP
Dateiname: C:\ORACLE-DUMP\CONTROLFILEC-1449626294-20120306-03.BKP

RMAN> restore database;

Starten restore um 16.05.12
Kanal ORA_DISK_1 wird benutzt

Kanal ORA_DISK_1: Zur³ckschreiben von Datendatei-Backup Set beginnt
Kanal ORA_DISK_1: Datendatei(en) werden zum Wiederherstellen aus Backup Set ange
geben
Kanal ORA_DISK_1: Datendatei 00001 wird zu C:\PROGRAMME\ORACLE\111\DATA\XXX
\SYSTEM01.DBF wiederhergestellt
Kanal ORA_DISK_1: Datendatei 00002 wird zu C:\PROGRAMME\ORACLE\111\DATA\XXX
\SYSAUX01.DBF wiederhergestellt
Kanal ORA_DISK_1: Datendatei 00003 wird zu C:\PROGRAMME\ORACLE\111\DATA\XXX
\UNDOTBS01.DBF wiederhergestellt
Kanal ORA_DISK_1: Datendatei 00004 wird zu C:\PROGRAMME\ORACLE\111\DATA\XXX
\USERS01.DBF wiederhergestellt
Kanal ORA_DISK_1: Datendatei 00005 wird zu C:\PROGRAMME\ORACLE\111\ORADATA\DBTT
wiederhergestellt
Kanal ORA_DISK_1: Datendatei 00006 wird zu C:\PROGRAMME\ORACLE\111\ORADATA\EM_LO
G_TUEM wiederhergestellt
Kanal ORA_DISK_1: Lesen aus Backup Piece C:\ORACLE-DUMP\BACKUPXXX777222669.
BKP
Kanal ORA_DISK_1: Piece Handle=C:\ORACLE-DUMP\BACKUPXXX777222669.BKP Tag=TA
G20120306T151108
Kanal ORA_DISK_1: Backup Piece 1 wurde wiederhergestellt
Kanal ORA_DISK_1: Restore abgeschlossen, abgelaufene Zeit: 00:02:05
Beendet restore um 16.05.12

RMAN> recover database;

Starten recover um 16.05.12
Kanal ORA_DISK_1 wird benutzt

Media Recovery starten

Kanal ORA_DISK_1: Zur³ckschreiben von Archive Log in Standardziel wird begonnen
Kanal ORA_DISK_1: Archive Log wird zur³ckgeschrieben
Archive Log Thread=1 Sequence=10
Kanal ORA_DISK_1: Lesen aus Backup Piece C:\ORACLE-DUMP\BACKUPXXX777222949.
BKP
Kanal ORA_DISK_1: Piece Handle=C:\ORACLE-DUMP\BACKUPXXX777222949.BKP Tag=TA
G20120306T151548
Kanal ORA_DISK_1: Backup Piece 1 wurde wiederhergestellt
Kanal ORA_DISK_1: Restore abgeschlossen, abgelaufene Zeit: 00:00:01
Archive Log-Dateiname=C:\PROGRAMME\ORACLE\111\FLASH_RECOVERY\XXX2DB\ARCHIVE
LOG\2012_05_16\O1_MF_1_10_7V73N5RW_.ARC Thread=1 Sequence=10
Kanal default: Archive Logs werden gel÷scht
Archive Log-Dateiname=C:\PROGRAMME\ORACLE\111\FLASH_RECOVERY\XXX2DB\ARCHIVE
LOG\2012_05_16\O1_MF_1_10_7V73N5RW_.ARC RECID=13 STAMP=783429893
Archive Log kann nicht gefunden werden
Archive Log Thread=1 Sequence=11
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: Fehler bei recover Befehl auf 05/16/2012 11:24:57
RMAN-06054: Media Recovery fordert unbekanntes Archive Log f³r Thread 1 mit Sequ
ence 11 und Start-SCN von 1094112 an

RMAN> alter database open resetlogs;

Datenbank ge÷ffnet

RMAN> quit


Recovery Manager abgeschlossen.

C:\Dokumente und Einstellungen\Administrator>

But when I now try to access the database control I got following error:
' 503 service unavailable: Servlet error exception occurred the current application deployment descriptor do not include in this response.

and the restored data are not included.

I hope someone can tell me what I did wrong.
Thank you

Published by: 919309 on 07.03.2012 02:08

Published by: 919309 on 07.03.2012 02:12

drop the repository and try with dbca

EMCA - deconfig dbcontrol db-rest drop

SPFile to restore to another host
Hi all
I did a few tests to restore DB from one host to another host. I does not make use spfile and pfile file original DB, change the file and create the pfile on the new host/DB spfile. The majority of the documents recommend you use SPFILE RESTORE AUTOMATIC backup;

The problem for us is that we use ASM and autobackup is saved to ASM on the original host. What is the procedure for me to use this spfile autobackup and restore to another host? We are using Oracle 10 g R2, RAC, windows Server 2003 R2, ASM, do not use the recovery catalog.

Thank you very much in advance.
Hello

Try to use

RMAN > RESTORE SPFILE FROM PFILE "C:\initYOURSID.ora" OF backup AUTOMATIC;

Then copy this file to another host.

#################### My test #######################

RMAN > restore spfile to ' / tmp/initDSRJ01.ora ' automatic backup;

From restoration to 15 January 09
using the control file of the target instead of recovery catalog database
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid = 254 devtype = DISK

field of recovery destination: / u04/flash_recovery_area
name of database (or unique name of database) used for research: DSRJ01
channel ORA_DISK_1: autobackup found in the recovery area
channel ORA_DISK_1: autobackup found: /u04/flash_recovery_area/DSRJ01/autobackup/2009_01_14/o1_mf_s_676163535_4px3ckrf_.bkp
channel ORA_DISK_1: restore SPFILE full automatic backup
Finished restore at 15 January 09

#############################

LS ltrh - /tmp/initDSRJ01.ora
-rw - r - 1 ora10g oinstall 3, 5 K 15 Jan 15:40 /tmp/initDSRJ01.ora

Kind regards

Rodrigo Mufalani
http://mufalani.blogspot.com

Flight hover text on my site by default, ignoring my HTML mouseover. Two different hosts show the same bug. (Chrome showed same on one host.)

My hover/mouseover stylesheet correctly texts show when < my custom > .css is local disk (offline), but when online, a default value "CTRL + R improves the quality of this image...". "watch instead, presumably from the browser. Sometimes a test shows my stationary custom text on the FIRST event mousover ONLY, then the default value is used.
```
      This behavior showed also on Crome before I banished it. (Chrome's default text was identical) Support at my usual webhost has been looking at the problem for two weeks without result. Today I loaded the same code to a different host organization (under http://waggledance.us) and I'm seeing the same default behavior, including an occurrence of the "first time okay" observation.
      I note there is a default "Main.css" on that second server, which makes me ask whether a default .css is getting slammed on my user after <my-custom>.css serves (on both hosts??).
```
This isn't a problem on your web server, it is almost certainly a feature of your internet service. Please see this recent thread for a few possible approaches: How can I get rid of the tooltip improve boring Images? Can solve you?

RMAN restore and recovery

Hello
If I have two full backups in my FRA (say 7 to 14 days)
Q1. I assume that if I run it.
RMAN > restore database;
It will go to the last backup (7 days ago)?
Q2. How to restore the backup of ago 14 days instead?
Q3. If I restore the database of 14 days but then question
RMAN > recover database until < 3 days >
RMAN would simply apply the recovery logs archived for 14 days to the point of recovery or it would be smart enough to realize, there a backup to restore all first 7 days ago, then apply 7 days recovery logs, to the point of recovery?
Q4. Can you do an online backup as a copy of the Image instead of a backup set or you can offline backups when you use a copy of the Image?
All wisdom, greatly appreciated
Jim

(1) switching is not required for recovery. You have just enough do to standardize the data files. It doesn't matter if the switch is produced or not.

(2) "extra small set of archivelogs" can be enormous if the backup is long-term with many DML during backup.

You need a sufficiently archivelogs, regardless of the copy backupset or image, to make the data files in compliance.

(3) hot RMAN copy backup data files, while they are updated, but in order to avoid a block inconsistent read to avoid corruption. The data files are not frozen, as with the hot user managed backup.

Why is no longer a faster network between two different hosts?

Hello community!
I need help in this mystery.
I have three computers different virtual, all of them with e1000 (also I tried all VMs with vmxnet3) and the latest vmware tools.
Two of this mV, are in the same physical host (ESXi 5.5.0 2068190). Call for example: VM - 1A & VM - 2A
Another virtual machine, is in another physical host (ESXi 5.5.0 2068190). Call VM-1 b
Both ESXi hosts are connected with two cards 10 Gbit network with load Balancing: "From hash IP route" and detection: "link status only.
Traffic Shaping is disabled in all Ports.
The environment is very clean, and we have more VMs that can disrupt the test (or inappreciable).
VM - 1a: 10.12.50.201 - physical host ESX - A
VM - 2A: 10.12.50.202 - physical host ESX - A
VM-1 b: 10.12.50.200 - physical host ESX - B
Why I don't see better network speed reference, when two virtual machines send something two physical host is different than when the two virtual machines are in the same physical host?
It is not a question of "iperf", I used the other test with CPS and I had the same speed.
Thank you very much!!!
PS: The physical host computers are: Dell PowerEdge r.620 - 16-core Xeon - 384GB RAM

Have you tried to move your VM on different hosts to the same host?

Your names of:

VM - 1 a host has

-VM-1 b on Hots B

ToDo

Now move VM-1B for A Host and repeat the test (two virtual machines on the same host). What happens now to the speed?

Check

-How is the CPU usage during the test we Host-A, if you have 2 virtual machines on this host?

-What is your ratio of P2V CPU? (overprovisioning?)

What it could be

-Host doesn't have enough CPU power to serve the two virtual machines (or over-provision P2V related problem). But for me no sense if I see your config server with 16cores.

-It is not a host but a related problem of VM (perhaps it depends on the VM - A2). Makes the most sense for me (your test is to check)

Please share the results

MSSQL server VM cluster should be in the same host or different hosts with RDM

Could someone me on how to place the code SQL cluster s VM with RDMs in ESXi hosts for advice.
What is the best practice to place the SQL VM s in ESXi hosts.
Affinity or an anti-affinite...?
Appreciated your valuable answers.

Depends entirely on the use case.
- 2 MS SQL nodes on the same host to see the availability of the software
- 2 nodes on different hosts to see the availability of the equipment
I'd say MS Clusters on the same host (at the time of HA and vSMP FT) are redundant VMware features and represent an increase in management fees. The MS cluster on hosts provide something in addition to what VMware vSphere alone can provide!

segregation of VM on different hosts

I'm new to vmware releatively, but I am interested in the design of fault tolerance and what are the specific virtual servers that ensure on different hosts. For example in small installations if you had 2 DCs on a single host then who is it a single point of failure in the AD services? Outside of DC, what other specific types of servers/server roles warrant you are on different hosts? Or with VMWARE HA do you not need to worry as much as if his is attached to a cluster virtual machine must be picked up by another host if the host fails, so segregation is not so much a concern?

Hey cb122,

Welcome to the community and Vmware,

First good HA is very different then FT. HA leans on the hosts and makes sure that all your cluster hosts are running and the computer virtual is running. If a host fails HA reviews cela and turns on all the VMS running on the host failed on another host in the cluster. Your VM will see this as an unexpected shutdown. Although short, this may take a few minutes for all your VMS is to start again based on what was running on the failed host.

Fault tolerance is basically HA on stariods and what it does is eliminate this short stop breakdown or unexecpted on the host failure. But that comes at a high cost, reduced capacity, there are a number of requirements to work ect ect, look under FT for more information. FT back more now is your only allowed to have 1vCPU IP protected VM, which kind of shoot it in the foot because most systems requiring such high availability require more vCPU. However how FT works in summary is this: you select FT on a virtual machine, and then creates a snapshot of the virtual machine and it works on a different host. Any changes made to the virtual machine are always synchronized lived with his shot. If the failure of a host that is running your VM, the VM snapshot is then invited to production and immediately resumed all of its features, it generates on an another snapshot on another host in the cluster to its protection.

Awenser your question each environment is different, but most of the time a cluster of 3 + host Vmware will protect you for most, but in your case I would put a rule of DRS in to divide your virtual DC 2 as if both are on the same host and that host fails, you will lose all AD and probably DNS as most people run these 2 services together. This could be problmatic to your environment.

Aside from that, I would be just shared any VM that could not handle all seen down at the same time, if a failure of the host. A good example of this would be a web server farm. Say, you have 4 IIS servers in a web farm, you do not want to run all 4 on the single host as if that host fails your website goes down for 2 to 4 minutes until these web servers would start up on a new host. In this case, you could create a ruleset DRS to keep 2 webservers on a host and 2 on the other.

I hope this helps.

How to publish a site of muse adobe on a different host

What are the steps to the publication of an adobe muse site to a different host as cow provider?

Publish in the same button you can select upload to FTP or export to HTML and then upload to your server.

https://helpx.Adobe.com/Muse/using/uploading-site-third-party-hosting.html

https://helpx.Adobe.com/Muse/how-to/third-party-hosting-services.html

https://helpx.Adobe.com/Muse/topics/exporting-publishing.html

Thank you

Sanjit

RMAN restore to different host

Similar Questions

Maybe you are looking for