RMAN - RETRIEVE the backup complete and necessary archives Logs of SBT_TAPE to disk

Similar Questions

• RMAN backup for lack of archive log - Urgent

  Dear all,
  How to take backup in oracle rman for lack of logseq at logseq archiving log.
  
  Please help me urgent.
  
  Thank you
  Manas

  The SNA method before roll is easiest to get your sleep in harmony rather than completely rebuild.

  The RCS on primary continues to rise and if the archives get generated on primary at a regular stage, would be late the night before by a huge margin.

  If there is a gap of newspaper caused lack of archives and his backup is not available, then I'd rather go with the Roll Forward YVERT method.

• (the backup completed, but some files were skipped--(0 x 80070003)) & (0 x 80070002))-Please help!

  Hey everybody...

  I tried for two days back my 64 bit Windows 7 system.  Whenever I do, I get the following messages saying the "backup completed, but some files were skipped.  (I get two error codes (0 x 80070003)) & (0 x 80070002))

  This is the description that is displayed in Notepad after the backup is performed:

  Backup has encountered a problem during backup of the file C:\Windows\System32\config\systemprofile\iJamez\Pics & Vids\Internal storage. Error: (System does not find the specified path. (0 x 80070003))

  Backup has encountered a problem during backup of the file C:\Windows\System32\config\systemprofile\iJamez\Pics & Vids. Error: (System does not find the specified path. (0 x 80070003))

  Backup has encountered a problem during backup of the C:\Users\James\Desktop\Contacts file. Error: (the system cannot find the specified file. (0 x 80070002))

  the iJamez folder is located under the folder James which is on my desk at the top of the page, that I him have also stored in my external hard drive... the order goes like this:

  PC: C:\James/iJamez/Pics & Vids

  Outer: D:\iJamez/Pics & Vids

  + Pictures and videos is I have sync it with my iPhone.

  The last line of the error is in what regards the Contacts... I installed Outlook Express and I noticed that the Contacts folder has been installed on my desktop and I deleted because I don't need.

  Is someone can you please help me understand this... It makes me crazy!

  Thanks in advance to all!

  James
  E-mail address is removed from the privacy * (please email if you directly want to advise me on how to fix this isssue)

  I SOLVED THE PROBLEM...

  What I had to do, is create a folder named "iJamez" inside:

  C:\Windows\System32\config\systemprofile

  Once I created the folder iJamez inside (see above) I then created another folder inside iJamez called Pics & Vids. Once all of these files, I did my backup worked fine. He didn't ignore any files at all.

  But of course, my only question is, why the hell did I have to create these folders in the first place? Why in the world the Vids & photos that I sync with my iPhone would have something to do with a full backup?

  I do not understand why, I am just happy it worked.

  Can anyone shed some light on why this took place?

  Thank you.

• Windows 7 backup error "the backup completed, but some files were skipped - 0x8100002F."

  Original title: error on backup windows 7 files ignored

  Have used the backup of windows 7 with no problems for several years.

  Get this error now: "the backup completed, but some files were skipped - 0x8100002F"

  Log shows:

  Backup has encountered a problem during backup of the C:\Users\HOME\Pictures\2013-08-17 file. Error: (the system cannot find the specified file. (0 x 80070002))
  Backup has encountered a problem during backup of the C:\Users\HOME\Pictures\2013-08-17-dup file. error: (the system cannot find the specified file. (0 x 80070002))

  Check my hard drive of the PC with windows Explorer & files above do not exist.

  Tried to change my backup settings to not have the folder of images on the home account backed up & still get the error. Store all of my photos on another account (admin account) so no need to save photos on the House.

  Please help to get rid of this annoying error.

  Hello
   
   
  This problem occurs if Windows backup ignores certain files when Windows Backup cannot find them. When you perform the backup there backup Documents, photos, music and videos through user libraries. So if Windows detects any changes in the path of the folder then the libraries do not recognize their unless you access the corresponding library via Windows Explorer.
  
  Please, try the steps in the Microsoft KB article and check if it helps.
  0x8100002F error code and or error code 0 x 80070002 when you back up files in Windows 7.
  http://support.Microsoft.com/kb/979281
   

  I hope this helps. If the problem persists, please answer, we will be happy to help you.

   
   

• Maintanence backup: "the backup completed, but some files were ignored.

  Hello, when I do the backup of windows, at the end I receive this note on files that have been ignored during backup "Backup has encountered a problem during backup of the file C:\Users\Rami\Saved games. Error: (the system cannot find the specified file. (0 x 80070002)) backup has encountered a problem during backup of the file C:\Users\UpdatusUser\Saved games. Error: (the system cannot find the specified file. (0 x 80070002)) ».

  Please tell us how to solve this problem.
  Thank you.
  Rami.

  Hello Rami,

  "I understand that when you perform the backup, you get the following error: the backup completed, but some files were skipped (0 x 80070002).

  I suggest you to follow the suggestions of this link and we will reply with the status.
  0x8100002F error code and or error code 0 x 80070002 when you back up files in Windows 7
  http://support.Microsoft.com/kb/979281

  Hope the above information helps.

• How to retrieve the network icons and the taskbar sound? They disappeared

  original title: extraction and network icons

  How to retrieve the network icons and the taskbar sound?  They disappear from the notification area of the taskbar.

  Hello

  There are different ways to fix it

  read all the information on the link below

  Try Method 1 or 3

  Method 1. :

  1. right click on the taskbar and click Properties.

  2 tab Area of Notification .

  3 check the (on) or disable (off) the options you want or do not want to display on the Taskbar Notification area

  Method of reading 3 etc. in the link below

  How to enable or disable the Notification area system icons in Vista

  http://www.Vistax64.com/tutorials/106787-notification-area-system-icons.html

• I try to install lightroom cc, it loads just lightroom 5.7.1... I deleted the LR5 completely and reinstalled LRcc but just the LR5 charges, how can I get CC?

  I try to install lightroom cc, it loads just lightroom 5.7.1... I deleted the LR5 completely and reinstalled LRcc but just the LR5 charges, how can I get CC?

  This could mean that Lightroom CC is not supported on your machine.

  The operating system you have?
  Is - this machine is 64 bit or 32 bit?

  CC of Lightroom is supported only on 64-bit machines: system requirements for Photoshop Lightroom for Mac OS and Windows

• never had a disc of windows vista with the new laptop and no option to make a recovery disk, and I need to format my laptop to factory / clean, help!

  never had a disc of windows vista with the new laptop and no option to make a recovery disk, and I need to format my laptop to factory / clean, help!

  How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their way of doing recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• We are performing the backup yesterday and in the process of primary connection attempt that isn't in the script

  We making the backup only on standby db. Backup complete but see error connection failed.

  connected to the recovery catalog database

  RMAN > BACKUP INCREMENTIELLE LEVEL = 1 base DATA CUMULATIVE PLUS ARCHIVELOG DELETION ENTRY;

  2 > DELETE OBSOLETE;

  3 >

  From January 13, 15 backup

  RMAN-06820: WARNING: unable to archive the current log on the primary database

  Target ORACLE database error:

  ORA-17629: unable to connect to the remote database server

  ORA-17627: ORA-01017: name of user and password invalid. connection refused

  ORA-17629: unable to connect to the remote database server

  allocated channel: ORA_DISK_1

  channel ORA_DISK_1: SID = 77 type device = DISK

  channel ORA_DISK_1: starting compressed archived log backup set

  channel ORA_DISK_1: specifying the newspapers archived in the backup set

  archived journal thread = 1 sequence = 10552 entry RECID = STAMP 61494 = 868817127

  archived journal thread = 1 sequence = 10553 entry RECID = STAMP 61496 = 868817130

  archived journal entry thread = 1 sequence = 10554 RECID = 61497 STAMP = 868817131

  archived journal thread = 1 sequence = 10555 entry RECID = STAMP 61495 = 868817130

  Change the "rman TARGET / ' to 'rman target sys/password@stby.

  Hemant K Collette

• Problems with duplicate DATA when the data file was added after the backup completes

  Hello
  
  I am facing a problem when running of duplicate database with the command of database duplicate RMAN on a 10 g database. If I have the duplication from a full backup that is missing a data file that has been added to the database after the full backup of preforms, I get the following error message:
  

  Starting restore at 10-10-2009 18:00:38
  
  released channel: t1
  released channel: t2
  RMAN-00571: ===========================================================
  RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
  RMAN-00571: ===========================================================
  RMAN-03002: failure of Duplicate Db command at 10/10/2009 18:00:39
  RMAN-03015: error occurred in stored script Memory Script
  RMAN-06026: some targets not found - aborting restore
  RMAN-06100: no channel to restore a backup or copy of datafile 43

  Redo log which was Pond at the time of the creation of 43 of the data file is also available in the backups. It seems that RMAN cannot use the log information archived redo to restore the content of the data file 43. I guess that because failure is already reported in the RESTORATION and not in the RECOVERY phase, so again the archived logs are not available yet. I get the same message even if I do another backup of the data file 43 (so a backup that is not in the same backupset as the backup to all the other data files).
  The script, the command duplicate product, I guess that RMAN reads the contents of the source database controlfile and trying to get a backup that contains all the data files to restore the database Assistant - if such a backup is not found, it fails.
  
  
  Of course, if I try to perform a restore/recovery of the source database, it works without problem:
  

  RMAN> restore database;
  
  Starting restore at 13.10.09
  using target database control file instead of recovery catalog
  allocated channel: ORA_DISK_1
  channel ORA_DISK_1: sid=156 devtype=DISK
  
  creating datafile fno=43 name=F:\ORA10\ORADATA\SOVDEV\SOMEDATAFILE01.DBF
  channel ORA_DISK_1: starting datafile backupset restore
  channel ORA_DISK_1: specifying datafile(s) to restore from backup set
  restoring datafile 00001 to F:\ORA10\ORADATA\SOVDEV\SYSTEM01.DBF
  .....

  The 43 data file is re-created and then redo is applied to the course.
  
  So, does anyone know if the duplicate database can use archived redo logs to recreate the contents of a data file, as does a normal restore/recovery? If this is the case, then it is necessary to perform a full backup before each duplicated if a data file has been added after such a backup database.
  
  Thanks in advance for any answers.
  
  Kind regards
  Swear

  Hi swear,.

  I got exactly the same problem during replication.
  Because we backup archive logs every 6 hours with rman, I added an additional block of running this script.
  run
  {
  backup incremental level 0
  format "% d_ % s_ %%t p_ bk_ '.
  filesperset 4
  database not saved;
  }

  (I also hit a bug in the catalogue which was resolved by patching up the dbs catalog 11.1.0.6, 11.1.0.7 for.)

  This will restrict the data not making file not part of any backup rman 6 hours while jumping for which there is already a backup of data files.

  Kind regards

  Tycho

• Retrieve the catalog LR and photos

  My Macbook Pro should be reformatted. I have Lr and photos stored on an external hard drive. What is the best way to retrieve the catalog and photos from the external hard drive? I am one of those who need step by step instructions. My OS is 10.10.5.

  Thank you very much.

  Hi Catherine Costolo,.

  Please see the following link for restore catalog Lightroom sauvegardΘ: How to restore a backup of Lightroom? Lightroom Queen

  Also check out the following link to reconnect the images: Adobe Lightroom - find folders and files moved or missing

  Concerning

  Tanuj

• RMAN change the backup of data files directory

  Hi all!

  I have question for RMAN. My backups keep in fast_recovery_area (/ opt/oracle/fast_recovery_area). I want to change the path of my fast_recovery_area to another location. I've changed that through SQL more command: ALTER SYSTEM SET DB_RECOVERY_FILE_DEST = ' / opt/oracle/backup ' SCOPE = BOTH SID ='* ';

  Now, my fast_recovery_area is in this path/opt/oracle/backup. In the fast_recovery_area, I have 4 folders (archivelog, autobackup, backupset datafile). All folder is created in the new location and RMAN write successfully the file on the new location except a single file (datafile). How can I change this option for this folder that writes to the new location. P.S datafile directroy have * dbf files backed up nightly.

  Thank you!

  You use an incremental update strategy of backup.  The level 1 backup is always aware of the 'previous' 0 level backup in the old location, so it is not a fee L0 backup in the new location.  You can remove the old backup, run a BACKUP DUPLICATION and OVERLAPPING COPY OF DATABASE for Oracle to be aware that the L0 backup no longer exists.  Then, run a fresh backup for Oracle create a new backup of L0.

  Hemant K Collette

• The total size of the backup database and Total database size.

  Hi Experts,
  
  How can I find the size of the size of the database and the size of the backup with only the RMAN catalog help.
  I use Oracle 10.2.0.5. and Tivoli TSM
  
  I have

  Hello

  See this doc...
  http://download.Oracle.com/docs/CD/B28359_01/backup.111/b28270/rcmreprt.htm#CHDBIGHG

  Connect to SQL * for the database you intend to question the backup history.

  Ask the view V$ RMAN_BACKUP_JOB_DETAILS for more information on the backup type, status, and the start and end time.

  The following query shows the history of the backup jobs sorted by the session key, which is the primary key for the RMAN session:

  COL STATUS FORMAT a9
  COL hrs    FORMAT 999.99
  SELECT SESSION_KEY, INPUT_TYPE, STATUS,
         TO_CHAR(START_TIME,'mm/dd/yy hh24:mi') start_time,
         TO_CHAR(END_TIME,'mm/dd/yy hh24:mi')   end_time,
         ELAPSED_SECONDS/3600                   hrs
  FROM V$RMAN_BACKUP_JOB_DETAILS
  ORDER BY SESSION_KEY;
  

  Ask the view RMAN_BACKUP_JOB_DETAILS V$ at the rate of tasks of backup in an RMAN session.

  The following query shows the speed of backup job sorted by the session key, the primary key of the RMAN session. The in_sec and out_sec columns columns display the input data and output per second.

  COL in_sec FORMAT a10
  COL out_sec FORMAT a10
  COL TIME_TAKEN_DISPLAY FORMAT a10
  SELECT SESSION_KEY,
         OPTIMIZED,
         COMPRESSION_RATIO,
         INPUT_BYTES_PER_SEC_DISPLAY in_sec,
         OUTPUT_BYTES_PER_SEC_DISPLAY out_sec,
         TIME_TAKEN_DISPLAY
  FROM   V$RMAN_BACKUP_JOB_DETAILS
  ORDER BY SESSION_KEY;
  

  Ask the view RMAN_BACKUP_JOB_DETAILS V$ for the size of the backups in an RMAN session.

  If you run the DATABASE BACKUP, then V$ RMAN_BACKUP_JOB_DETAILS. OUTPUT_BYTES indicates the total size of backup games written by the backup task for the database that you are backing up. To view the backup set sizes for all registered databases, ask RC_RMAN_BACKUP_JOB_DETAILS.

  The following query shows the speed of backup job sorted by the session key, the primary key of the RMAN session. The in_sec and out_sec columns columns display the input data and output per second.

  COL in_size  FORMAT a10
  COL out_size FORMAT a10
  SELECT SESSION_KEY,
         INPUT_TYPE,
         COMPRESSION_RATIO,
         INPUT_BYTES_DISPLAY in_size,
         OUTPUT_BYTES_DISPLAY out_size
  FROM   V$RMAN_BACKUP_JOB_DETAILS
  ORDER BY SESSION_KEY;
  

  The following sample output shows the speed of the backup jobs:

  I hope this will help...

  Kind regards
  Levi Pereira

• Retrieve the backup Time Machine to iPhoto with El Capitan

  I had issues with my hard drive and decided I do a backup of my computer using Time Machine, install a new hard drive and reinstall my OS X. Once I had installed my new hard drive, I used my old one (via a 2.5 USB eSATA cable) to install from the recovery partition and I was prompted to install OS X El Capitan. All this went well and I've been operating pretty quickly.

  The problem: I have a file "iPhotoLibrary.migratedphotolibrary", I found in my new Time Machine backup the Photo app does not recognize. I saw that you can always download the latest version of iPhoto, if you can find it in your App store, but I never bought iPhoto isn't in my tab "purchased."

  Possible solution?: I have earlier versions of Mac OS X in my tab 'Bought' in the App Store. I can download one from OS X, put on a bootable disc, partion of my hard drive and install OS X on the new partition? I say, older versions will iPhoto and I can open my file "iPhotoLibrary.migratedphotolibrary" and export my photos from there?

  I really want to do: Have a way to import my file into the new Photo on El Capitan app.

  Any help would be appreciated.

  Thank you

  Matt

  Visit Time Machine FAQ of Pondini helps with Time Machine. It is a vast site with almost everything that you need for using Time Machine. You will not find a better resource for Time Machine in one place. I think you want to point 14 or 15 to learn how to restore a single file from a Time Machine backup.

  [Authorization to use the foregoing has been granted by khati.]

• How to move the hard drive to external hard drive backup and how to make the backup automatically and regularly

  Original title: EVOLUTION of BACKUP

  I SAVED IT ON THE HARD DRIVE TO PUT IN PLACE TO ENSURE THE GUARD. NOW, I HAVE A LIL BOX IS AN EXTERNAL HARD DRIVE, I GUESS. I GOT IT FOR THE MEMORY, LIKE A BIG THUMB. SAYS ITS NEED F HOW TO BACKUP IT (MY LAPTOP) THIS AUTOMATICALLY AND REGULARLY. HELP PLEASE, THANK YOU?

  Hello

  You can try the following methods and check if it helps.

  Method 1: Change where you back up your files
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-where-you-back-up-your-files

  Method 2: Set up or change automatic backup settings
  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-or-change-automatic-backup-settings

  Reference:
  Back up and restore: frequently asked questions: http://windows.microsoft.com/en-US/windows-vista/Back-up-and-restore-frequently-asked-questions

  Backup your files: http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-your-files