keyboard "M" does not

Similar Questions

• Keyboard MacBook does not synchronize with external keyboard

  I have an external USB (Logitech K520) keyboard and is not sync with the MacBook keyboard.

  What I mean with "sync": for example, when I press shift on the MacBook, and 'a' on the external keyboard he wrote 'a' instead of 'A '.

  Another example: I press cmd on the MacBook and the 'c' on the external keyboard, it does not copy the selection

  It worked on my old ThinkPad. I can work on a Mac as well?

  The solution is here: rd-to-accept-modifier-key-input-from-macbooks-i http://apple.stackexchange.com/questions/131287/how-to-get-external-apple-keyboa

• HP keyboard model kg-0851, I tried all the steps from hp, but the keyboard still does not

  I tried all the steps from hp, but the keyboard still does not.  When I look at the Device Manager, it says that it is fine.

  Hello

  1. what operating system is installed on the computer?
  2 have. what troubleshooting measures you tried?
  3. don't you make changes to the computer before the show?

  I suggest you try the steps from the following link:

  Mouse, touchpad and keyboard with Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/Mouse-touchpad-and-keyboard-problems-in-Windows

• BlackBerry Blackberry Q5 q5 keyboard backlight does not work

  Hi, I bought the new BBQ5 about a week ago & keyboard backlight does not one.is day it hardware or software problem.

  I also downloaded the BB virual expert to check the sensors.i did not notice this light sensor sensor & proximity is not available. my version of the BB OS is also 10.2.1.3247.

  Please help me to resolve this issue. I use a lot in the night for mails etc.it composition is quite irrerarting with the backlight on the keyboard.

  Thanks in advance.

  Restart the system contributed to reslove the issue. Now the backlight key board turned on.

• InDesign cc - double keyboard shortcut does not

  Hey all,.

  I hope I can get an answer to this. It is not a huge problem, it just messes with workflow and as such is quite annoying!

  The problem is with other versions of Indesign, you can press "command + Alt + Shift + D to duplicate an object as many times as you wish. I tend to use this function a little. However with the release of InDesign CC the keyboard shortcut seems to no longer work. I can go to the Menu change and use the duplicate feature it... (the keyboard shortcut command is sitting next to the word again), but it's quite inefficient when you want to duplicate an object 25 + times. Someone else this problem? Is it possible to get this function to work?

  Thank you!

  --

  Using OSX 10.9.5

  I also work on a Mac with InDesign CC 2014.2. I am running Yosemite. I also noticed that this keyboard shortcut does not work. I can't see an obvious conflict (such as the system of shortcuts).

  Try using edit > Edit keyboard shortcuts to assign a different shortcut. On a Mac, you can use the Ctrl key, which is not usually used. CTRL-D works very well for me.

• Any way to fix the keyboard backlight does not not 2011 macbook pro

  No way to fix the keyboard backlight, what does not work, on my macbook pro 2011. El Capitan was installed earlier. I had a gray screen the other day and had to restart in safe mode. That's when the backlight is out. Thank you very much!

  Susie

  1. press the F6 key twice.

  2 reset the SMC and NVRAM.

  Reset the NVRAM/PRAM memory.  http://support.Apple.com/kb/PH18761

  Reset the SMC. Choose the method for "on Mac Laptops with non-removable battery.

  https://support.Apple.com/en-us/HT201295

• Satellite Pro L850 - keyboard / touchpad does not work

  Hi all!
  I just bought new Satellite Pro L850 with windows 7 64 bit on a recovery partition.
  I have a big problem of internal cause keybord does not work under windows. In the bios, I can do anything I want. But the first configuration of windows (I can not deal with same user name and the name of the computer), keyboard does not work. I own windows version (with programs toschiba - recovery partition).

  It seems that this is not a cause of hardware under the work of bios keybord problem.

  Extra I have updated the bios last version 6.50, but not noticed any changes.

  Please help me with this question, cause I don't have any idea what to do now.

  Good day and w8 for answers

  PCZ

  PS. external keybord on usb work!

  Post edited by: pcz

  The whole story seems incredible. Keyboard and new laptop does not work?
  Install the check and image recovery again if the situation is the same. If the problem persists contact your local dealer, explain the situation and ask for Exchange.

• Excite Pro AT10LE-A-108: after JB 4.3 external BT keyboard upgrade does not work

  Hi all!

  After update 4.2 JB JB 4.3 does not work my bluetooth keyboard.

  Pair ok, Tablet keyboard sees but does not.
  Please, do toshiba repair package or fix problem.

  On the other my android device (phone LG with 4.1.2) working this keyboard ok.

  Sorry, my English is very bad. (Google Translator)

  Thank you.

  [Keyboard Type | http://www.trust.com/en/all-products/18441-executive-folio-stand-with-bluetooth-keyboard-for-ipad]

  Okay, please, I want to downgrade 4.2 JB for this tablet, it's possible?

• Satellite A7330 S75Dt - keyboard backlight does not work

  Hello

  recently I bought this laptop A7330 S75Dt with windows 8, and after 2 days, the backlight of the keyboard has exploded.
  The Fn + Z combination indicates it's on and it should work, but it's not.
  I don't need it but its irritating that it does not work. I hope someone can help me.

  Thank you
  Luk

  Go to the BIOS by pressing the F2 key while under tension.
  Then go to advanced-> configuration of the system and check if the lighting of the option is enabled.

• Keyboard/mousepad does not on Satellite 1110

  I have an old satellite 1110. It is a dual boot with linux and windows XP machine. The Boot Manager is grub.
  When I let the machine start the OS default without touching the keyboard at the stage of grub, about 70% of the time when the finishing of the machine to start the keyboard and mouse will be non-functional. However if I use the upper and down arrows to grub stage, 100% of the time to keyboard and mouse mat work correctly when the machine finishes booting.

  I'm trying to understand why this would be so. It does not seem to relate to the involved BONE, just the physical manipulation of the keyboard. Is it a bad connection due to lack of chip, bios or other software problem?

  Hello
  Are you sure that the touchpad is enabled?
  Check it by using the Fn + F9 key combination. If this combination does not work, try to find the power button function in Control Panel-> mouse control
  By the way; have you tested If reinstalling the touchpad driver could help solve this problem?

• 'Ctrl + End' keyboard shortcut does not work as expected. I tried safe mode. does not move the tab to the end of such specified list, just scroll to the end of the page.

  According to http://support.mozilla.com/en-us/kb/keyboard+shortcuts,.
  'Ctrl + End' should move the active tab to the end of the list of tabs.

  But the shortcut does not work. Only, it scrolls to the end of the current page as if only "End" is pressed.

  I tried the mode without failure of firefox and closed all other open programs.

  What to do to debug this problem?
  or may there is a bug in firefox somehow?

  See the post of dao in this MozillaZine forum thread: http://forums.mozillazine.org/viewtopic.php?f=23 & t = 1304895

  Add code to userChrome.css below @namespace.

  See http://kb.mozillazine.org/Editing_configuration#How_to_edit_configuration_files

  @namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
  
  .tabbrowser-tab[selected="true"] {-moz-user-focus: normal !important;}
  

• Satellite L50-B-2E2 - keyboard backlight does not work

  Hi guys. I have a big problem on my laptop with my backlight, so I have a Satellite L50 - B and the backlight, it does not. I tried Fn + Z but nothing... If someone knows how, please help me.

  Q1: The keyboard backlight has worked in the past?

  Q2: Can you see a small keyboard sign above the key Z or Y?

  Q3: Are you sure that the keyboard supports the backlight?

  More information on keyboard backlight, here:
  http://APS2.toshiba-tro.de/KB0/HTD2603CL0000R01.htm

• M2 - fixing external keyboard keyboard problem does not work either

  Hello

  I have a user with a M2 Tecra keyboard works properly, 2 or 3 keys (Enter, space, lock), the rest of them when press cause a very quiet "beep" of the noise coming from the laptop.

  I guess this keyboard was defective - I have attached a usb keyboard to the laptop, but which has exactly the same symptoms, they keys do not work and when you press the beep noise is coming from the laptop, no characters appear on the screen.

  The laptop starts with the Windows XP login screen very well.

  Any ideas what caused this, and what is the solution?

  Thank you

  Hello

  Sounds to me like the keyboard on the motherboard controller went bad. Because it causes the default on an external keyboard, then your motherboard is bad. If it was just the keyboard, then external it would work fine. But first, all types of keyboard connected to a laptop computer are routed via the keyboard/controller integrated on the motherboard, then the characters are displayed. When this goes bad no keyboard does, not even an external. And the only solution that replaces the motherboard. I hope this helps.

• Integration of keyboard shortcut does not work without supervision on T450

  We received some new T450 for our company and I'm putting the shortcut keyboard on it integration tool but it does not work without supervision. I can install it manually with the command-> setup.exe/S/b/m/h, but I need to do for 400 machines with a deployment tool, and here I am stuck.

  I use the latest version of 5.51.001. It works very well for the T540p and more but is not visible for T450.

  Just to be clear, it installs successfully on T450 but does not work, if I push the buttons on the keyboard.

  OK, nevermind guys. I had to do a restart and everything worked.

• T410 AiO customer CAPS, NUM, and scroll keyboard stop does not work with PCoIP view desktop computers

  We have problems with our t410 AiO customers, where the CAPS, NUM and scroll stop lights on the keyboard do not work with view PCoIP desktop computers.

  I found the below information and a work around:
  If you use the Protocol PCoIP to display on a client system Ubuntu 10.04, the CAPS Lock, NUM Lock, and Scroll Lock lights on your keyboard do not work with desktop view. Although the lights do not work, the keys themselves work.
  Solution: Set the following configuration in a configuration file, such as/etc/vmware/config:
  mks.keyboard.useXkbSetNamedIndicator = 'TRUE '.

  The problem is this difficulty is already in place via the latest version of the HP, Z6A440, software that is installed within our Organization.

  What I discovered, is that the model that we initially bought for the test doesn't have this problem.  However, the models that we ordered since that time, DO have the problem and the solution above does not work as expected.

  The model originally ordered for test is still a customer of IOA t410... but there are 4 "under models' for customers of IOA t410... that we have to test is a H2W20AA, while those we receive and distribution are the H2W21AA model.

  No idea why, when connected to the desktop from view, that models of H2W21AA have this problem?

  H2W20AA is with Teradici PCoIP optimized, which can support PCoIP better, but H2W21AA is not with Teradici. That's the difference.

  However, the issue that you are experiencing does not matter in fact, we have not heard of this problem before. I would suggest that you do the following to see if there is no change:

  1. Go to download the latest VMware View 2.3.4 for t410, follow the instructions to install.
  2. If suggestion 1 does not work for you, try to connect to another VM group or set up a new machine virtual clean
  3. Call HP service center to save your problem for further investigation if the suggestion above did not work