RMAN throwing errors during backup Tablespace - RMAN-06004 and RMAN-06019

Similar Questions

• 0x800700B7 error during backup of Windows 7 (64-bit)

  Windows 7 Ultimate 64-bit on Dell XPS 8500.  Out of nowhere, run recent backup (made daily) supported my documents very well, but when he started the operating system image, he spits 0X800800B7 error and could not complete the backup.  Several attempts produced the same results.

  Ran SFC.exe, found nothing.  Tried proposed the deletion of the Windows backup folder into the "HKEY_Local_Machine\software\Microsoft\windowsNT\currentversion\schedule\taskcache\tree\Microsoft\windows" location; " fresh backup attempt and the system ran very well until he finished "My Documents" and began to create an operating system image when it chased new 0x800700B7 and stopped the back upward.

  At this point, I can't get the backup system.  Any suggestion would be appreciated.

  Hello

  You can perform the check disk on the external hard drive and check if contributing to the backup.

  Check a drive for errors: http://windows.microsoft.com/en-us/windows7/check-a-drive-for-errors

  Important: while performing the check disk on the hard disk, if bad sectors can be found, then check disk will try to repair this sector. All the data available in this area may be lost.

  Response with the State to help you further.

• Error during installation of Office home and Student 2007

  Hi evryone,

  When you try to install my Office 2007 family and student I still get the following error message: Error 1935. An error occurred during the installation of Assembly component {FAB10E66-B22C-4274-8647-7CA1BA5EF30F} HRESULT:0 x 80070005.

  Can anyone help?
  Thank you very much.

  Thanks for visiting the site of the community of Microsoft Windows. The question you have posted is related to Office and would be better suited to the office community. Please visit the link below to find a community that will provide the support you want.

  http://www.Microsoft.com/Office/Community/en-us/flyoutoverview.mspx Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Muse has encountered an error during the synchronization with BC and closed: "cannot delete attributes of a XHTMLElementProxy. Any ideas?

  

  I'm with Business Catalyst site synchronization when it came.

  Got the latest version of the software.

  Please, go to the Help menu in Muse and select "updates... "then select Muse in the Creative Cloud Desktop app and update. (The 2015.1.1 update comes to live this morning, so your Muse and CC probably haven't noticed, again.) The update includes a fix for this error.

• When you open lightroom it says an error during playback of preview hidden and need to stop smoking. does not restart

  How can I fix it?

  Hi melotam,

  It seems that something in your preview cache has been altered. No worries - you can delete preview cache and Lightroom are going to rebuild it, even if it may take some time, depending on the size of your catalog.

  To remove the preview cache, follow these steps:

  1. quit Lightroom.

  2. in your operating system, look for your Lightroom Catalog. Catalogs are generally/Pictures/Lightroom on Mac and my Pictures\Lightroom on Windows.

  3. Locate the folder whose name ends in "Previews.lrdata" and delete it. (note, may you enjoy a folder whose name ends with "Smart Previews.lrdata." You shouldn't need to remove that one).

  Once the preview folder is deleted, restart Lightroom. You can see gray thumbnails in the grid for a few moments that Lightroom starts to rebuild your preview cache.

  Let us know if that helps.

  Kind regards

  ~ Mohit

• Error during compilation of package header and the body - How to change pkb file associat

  Hello world
  
  It has been noticed elsewhere (in the thread "package for compilation and body header" January 12, 2010) compiling the scripts package sometimes fails (apparently due to a bug in sqldeveloper) when the script contains the trailing slash /.
  
  This bug is still open?
  
  Question: in the thread mentioned above, it is recommended as a workaround to change the association of corresponding file from pl/sql to sql type. I want to do; I know the place in the Preferences dialog box, but most associations seem to hard-coded and cannot be changed.
  
  I would appreciate ideas!
  
  Thanks in advance,
  
  user8632123.

  For the workaround: you need to change the extension of the file , not the association (for example, .sql).

  Have fun
  K.

• Two updates - for "SQL Server 2005 Service Pack 3 'and 'Power Poin 2007", throwing errors when installing Code FF Code 80070663

  Original title: two updates - for "SQL Server 2005 Service Pack 3 'and 'Power Poin 2007", throwing errors during installation

  For several months, one day each on ' Windows Vista Bussiness "and"MS Office Professional 2007' install.

  Relevant updates are:-

  1 security Update for SQL Server 2005 Service Pack 3 (KB2494113)

  2 update for Microsoft Office PowerPoint 2007 (KB2535818)

  The lifted message when the update is "patch installer has stopped working".

  Finally, the "errors:" are: -.

  Code FF  Windows Update has encountered an unknown error

  Code 80070663  Windows Update has encountered an unknown error

  I tried nmerous solutions suggested on the forums but nothing helped.

  Please suggest what you please!

  Hello

  Have what troubleshooting steps you tried?

  Answer to the above question could help us by providing the best troubleshooting steps.
  However, visit the link below to download and install the update of security for Microsoft Office PowerPoint 2007 (KB2535818) update.
  http://www.Microsoft.com/download/en/details.aspx?ID=24723

• I use TDE tablespace encriptación and backup is performed (no encriptación rman). I get the error message when you try to restore the database

  I use TDE tablespace encriptación and backup is performed (no encriptación rman). I deleted the database and try to restore the backup. I get the error when you try to restore the database with rman restore database.

  ORA-19870: error when restoring backup piece + FRA_DG, oratst, backupset, 2015_03_2

  ORA-19913: could not decrypt the backup

  ORA-28365: portfolio is not open

  About what I know, you should be able to RESTORE the data, but no RECOVERY without portfolio being opened.

  Check the value of the variable environment - ORACLE_UNQNAME

  It has everything first a correct value and try to open the wallet.

  HTH,

  Pradeep

• Error during the registration of RMAN from the primary to the catalog database

  Hi all
  
  Here we have an environment with db1 (db_unique_name) 10g dataguard as primary and db2 (db_unique_name) Physics of the standby database. Also, we have configured a schema on a third computer as a database of catalog using following steps.
  
  The measures taken in the catalog database (appsdb):
  
  SQL > create tablespace rmancatlog_tbs datafile ' / u01/app/oracle/oradata/NEW/rman_catalog.dbf' size 500M autoextend extent management local segment space management auto;
  
  SQL > create user rman identified by oracle
  2 default tablespace rmancatlog_tbs
  3 unlimited quota on rmancatlog_tbs
  4;
  
  SQL > GRANT connect, resource, recovery_catalog_owner to rman;
  
  RMAN > create catalog.
  Recovery catalog created
  
  AMT added entries of catalog in primary and standby database. Then the primary database, we have tried to register for the catalog database. It shows that it registers. But all queries later rman throws the error. Here are the steps and the error:
  
  [oracle@db1 ~] $ rman target sys/oracle catalog rman/oracle@appsdb
  Recovery Manager: release 10.2.0.3.0 - Production on Mon Aug 13 21:39:32 2012
  Copyright (c) 1982, 2005, Oracle. All rights reserved.
  connected to target database: NIOS (DBID = 1589015669)
  connected to the recovery catalog database
  
  RMAN > register database;
  registered in the recovery catalog database
  
  RMAN > outline report;
  Report of the database schema
  List of permanent data files
  ===========================
  Size (MB) Tablespace RB segs Datafile file name
  ----
  -------------------- ------------------------
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-03002: failure of command report to the 08/10/2012 06:16:06
  [RMAN-00600: internal error, arguments [8201] [] [] []]
  
  Can anyone help on this error?
  Thanks in advance.

  Hello;

  Then, you have to re-create the controlfile to the target database. (Not funny)

  I like to use the method of trace file myself.

  How to recreate a Controlfile [ID 735106.1]

  Best regards

  mseberg

• RMAN backup location must change and remove obsolete

  Dear Experts,

  I'm working on the following environment,

  Operating system: Windows server 2012 R2

  Oracle version: 11.2.0.1.0 release

  Type of RMAN backup: Cumulative (preferred by the direction and I can't change it in differential backup)

  My current situation,

  I set up RMAN and H: drive for purposes of backup and G: for Archivelog.

  Recently, my city was covered by the flood waters and the server works not for a week so that we delete obsolete level 0 does not work.

  Currently there is not enough space to run a level 1 and level 0, while I should change the backup location.

  My Question is,

  (1) I need to change this location of drive H: to G: drive backup backup correctly without error not enough space.

  (2) after having taken a level 1 and level 0, depending on my 1 redundancy, RMAN mechanism should delete obsolete backup disk without failure G: and H:.

  Kindly help me how to get to my need. This will help me, thanks in advance

  You can

  1. replace the DB_RECOVERY_FILE_DEST G:

  2 run backups

  3. wait for the DELETE OBSOLETE delete obsolete backups of H:

  and then

  4. change the DB_RECOVERY_FILE_DEST return h as it was more early

  In this way, you don't have to use the FORMAT or CHANNEL of CONFIGURE commands (I was referring to CONFIGURE CHANNEL, not ALLOCATE CHANNEL) to change the destination of the backup

  Hemant K Collette

• Can't backup windows because Backup has encountered a problem during backup of the C:\Users\marcel\Documents\Youcam file. Error: (the system cannot find the specified file. (0 x 80070002))

  can not backup windows because: Backup has encountered a problem during backup of the C:\Users\marcel\Documents\Youcam file. Error: (the system cannot find the specified file. (0 x 80070002))
  Backup has encountered a problem during backup of the C:\Users\marcel\Documents\Youcam file. Error: (the system cannot find the specified file. (0 x 80070002)).

  Maybe it's because I disabled the camera to prevent other people using the computer?

  [Moved from comments]

  Hi Marrcel,

  Thank you for keeping us posted.

  The issue can be due to turning the camera off. I suggest you to activate the camera and try.

  Please come back for any clarification on this or any issue of Windows. We will be happy to help you.

• Getting the 80070005 error during the backup with windows vista home premium then closes backup

  When I use backup in windows I get errors then backup closes. the errors were 0x800700AA and now 0x80070005. I'm not familiar with what they mean but have tried Fixit without success.

  Hi Brian,.

  This error code means that the file or folder you want to backup does not have the necessary permissions.

  Method 1:

  If you need to make a backup of any file or folder, please ensure that give you all the permissions for that particular file or folder.

  To set the permissions of files, see the procedure below:

  a. right click on the file or folder and then click Properties.

  b. click the Security tab.

  c. under group or user names, click your name to see the permissions you have.

  d. If they don't get permission, click on change and give the full control.

  e. then check if you are able to backup.

  What are the permissions?

  Method 2: Check if you are able to backup by following these steps:

  Try to temporarily disable your anti-virus and malware during execution of the backup. If the backup works fine, then you have to search for updates and firewall settings in the security software.

  Note: Make sure that you enable the antivirus software, other security and firewall after the test programs.

  Method 3:

  Disable UAC during backup control.

  Enable or disable the User Account Control

  Note: Make sure that you enable user account control and the back of the antivirus on the computer after you complete these steps. It is not recommended to disable these settings on the computer. It's just to solve the problem.

• Error during the full backup of the system Vista "Media is not UDF.

  Original title: error during the full backup of the system Vista "Media is not UDF" I tried CD - R and DVD + R

  I just finished day three re - build with all the latest updates and now I want an IMAGE backup to recover from.  When I run Backup asked that media... suggest a label for the DVD but I get the error 'Media is not UDF' end there...

  Also if I back up to another hard drive on my system can recover from this Image?

  Thank you!

  Ken D

  Hello

  backup on an external hard drive or DVD

  the 1st link below is how do the backup of the complete computer for the company, ultimate and vista business

  http://www.bleepingcomputer.com/tutorials/tutorial145.html

  and that is how do to recover the backup complete pc

  http://www.bleepingcomputer.com/tutorials/tutorial144.html

  and here is the information of microsoft in restoring a system image backup

  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-your-computer-from-a-system-image-backup

  If you have problems, it's in here is a forum for microsoft at the link specifically for backup questions below

  http://social.technet.Microsoft.com/forums/en-us/WindowsBackup/threads

• Get the error code 0 x 80070003 during backup

  Original title: "a problem of backup."

  I get the same when you do manual and let Windows choose backup

  Data sheet:
  Intel Core i7 - 3770 k 3.5 Ghz
  8 GB RAM
  SSD 128 (c :)) Boot
  2 TB media/backup (d :))

  I noticed that he had no 'Administrator' file in the users

  "Backup jumped D:\ backup as it is on the backup target."
  Backup has encountered a problem during backup of the C:\Users\Administrator\Documents file. Error: (System does not find the specified path. (0 x 80070003))
  Backup has encountered a problem during backup of the C:\Users\Administrator\Music file. Error: (System does not find the specified path. (0 x 80070003))
  Backup has encountered a problem during backup of the C:\Users\Administrator\Pictures file. Error: (System does not find the specified path. (0 x 80070003))
  Backup has encountered a problem during backup of the C:\Users\Administrator\AppData\Roaming file. Error: (System does not find the specified path. (0 x 80070003))
  Backup has encountered a problem during backup of the C:\Users\Administrator\AppData\Local file. Error: (System does not find the specified path. (0 x 80070003))
  Backup has encountered a problem during backup of the C:\Users\Administrator\AppData\LocalLow file. Error: (System does not find the specified path. (0 x 80070003))
  Backup has encountered a problem during backup of the C:\Users\Administrator\Contacts file. Error: (System does not find the specified path. (0 x 80070003))
  Backup has encountered a problem during backup of the C:\Users\Administrator\Desktop file. Error: (System does not find the specified path. (0 x 80070003))
  Backup has encountered a problem during backup of the C:\Users\Administrator\Downloads file. Error: (System does not find the specified path. (0 x 80070003))
  Backup has encountered a problem during backup of the C:\Users\Administrator\Favorites file. Error: (System does not find the specified path. (0 x 80070003))
  Backup has encountered a problem during backup of the C:\Users\Administrator\Links file. Error: (System does not find the specified path. (0 x 80070003))
  Backup has encountered a problem in file C:\Users\Administrator\Saved backup sets. Error: (System does not find the specified path. (0 x 80070003))
  Backup has encountered a problem during backup of the C:\Users\Administrator\Searches file. Error: (System does not find the specified path. (0 x 80070003)) »

  Hello

  Which application do you use to make a backup?

  These problems occur because the folders or libraries that you are trying to back up or restore include a reparse point.
  Analytical points are similar to shortcuts Windows or Unix symbolic links. A point of analysis can be used to point to a file that is moved temporarily to a different drive. For example, a reparse point would a folder such as C:\DVD to point to drive E, the real DVD player.

  Perform the steps from the link below and see if the backup works.

  Windows backup or restore 0 x 80070001, 0 x 81000037 or 0 x 80070003 errors  

  Answer please if you have any questions.

• Backup has encountered a problem during backup of the C:\windows\system32\config\systemprofile\Desktop\music file. Error: (System does not find the specified path. (0 x 80070003))

  I had to uninstall iTunes a few months ago and successfully re-installed, but part of my music was missing.   At one point, following the instructions on a thread on the forums Apple or Microsoft, I saved my music library on the desktop. Since then, I do not have a library of music on the desktop file.  In my looooooong hours trying to fix things, I do not know if I deleted it or what.

  Now, I get the message:

  "Backup has encountered a problem during backup of the C:\windows\system32\config\systemprofile\Desktop\music file. Error: (System does not find the specified path. (0 x 8007003)) "whenever I have backup my computer.

  As I understand it, that does not affect really any other files, they rely on the spot (I think), but

  HOW CAN I GET RID OF THIS MESSAGE? or what is the cause?  Of course, I could use help in simple English, step by step, as I'm not very techno...

  Thank you!!!

  Try to be...

  SereneJulie

  Hi serene,

  Thanks for posting your query on the Microsoft Community.

  As indicated by the error, this problem appears, when these files/libraries that are saved automatically are not present on your computer. I suggest you to follow the steps below and check, if it can help solve the problem.

  • Create missing files that are listed in the error message.
  • Exclude files from the files to backup in the backup settings and then include these files in their original location. To exclude folders in other communities and to include these files in the original location, follow these steps:
    1. In Control Panel, open backup and restore.
    2. In the section back up , click change settings.
    3. In the dialog box Configure the backup , click Next.
    4. In the dialog box that you want to save , click Let me choose, and then click Next.
    5. Expand data files, library, expand additional locations, and then click to clear the check boxes folder AppData, Contactsand Research .
    6. Expand computers, expand the element of your system drive (for example, expand Local disk (c)), expand users, , and then click to select the checkboxes AppData, Contactsand Research if they exist.
    7. Click Next, and then click Save settings and exit.
    8. Backup and restore, click back up now to perform a new backup. The backup operation must complete without errors.

  If the problem persists, I suggest you follow the steps in the following article for troubleshooting backup problems.

  Windows backup or restore 0 x 80070001, 0 x 81000037 or 0 x 80070003 errors

  http://support.Microsoft.com/kb/973455/en-us

  Come back and let us know the State of the question, we will be happy to help you. We, at tender Microsoft to excellence.