RoboHelp 2015: Cannot close the project

Similar Questions

• Cannot close the first with other (LH one end) tab open are closed.

  Cannot close the first tab (end of LH we) but others are closing. Indicator download on tab keeps indefinitely - running windows under all the tabs are functioning normally.
  Open another copy of Firefox allows all tabs to work normally in this copy

  If this does not work in mode without failure, then disable all extensions and then try to find out who is the cause by allowing both the problem reappears.

  • Choose "Disable all add-ons" on issues to troubleshoot Firefox in Safe Mode to set window to disable all extensions.
  • Close and restart Firefox after each change through "file > exit ' (Mac: ' Firefox > leave";) Linux: "file > exit ')

  See Troubleshooting extensions and themes and problems of hardware acceleration to resolve common Firefox problems

• I have a statioery box that appears in the cenbter of my screen. Cannot close - the cursor moves UNDER it. How can I get rid of him?

  I have a box of stationery that opens in the center of my screen.  Cannot close - the cursor moves UNDER it. How can I get rid of him?

  Hello

  1. when exactly you get the pop up?

  2. What is the pop up to say?

  Additional information on the issue so that we can better help you.

• PC W7 cannot close the creative Cloud application

  Does anyone know why my pc W7 cannot close the creative cloud application when I stopped my pc?

  When I want to shut down the pc, I always have a message and must close the creative application Cloud by force (I don't know the passage of law).

  THX!

  This seems like a minor issue, so I recommend leaving her alone and allowing victory to force her to stop.

  You can also open your Preferences cc dialog box and not start cc when you connect if this prompt mind.  Just run the application cc, at most once a month.

  and if you want to solve the problem, you would probably need to uninstall any cc including the application office, specific to the use of the Adobe Creative Cloud cleaning tool to solve installation problems , restart your computer and reinstall the desktop by https://creative.adobe.com/products/creative-cloud application

• Cannot open the project elements

  Hello!

  I use a MacBook Pro, El Captain, 2.4 GHz Intel Core i5, 16 GHz RAM

  Adobe Premiere Elements 12

  After you have created and saved a project I restarted my Mac. Then, after a restart I could not open the projector-elements:

  The following message if poster (in German) appeared: 'ist Das Projekt offenbar beschadigt. ES kann nicht open werden' (the project seems to be defective. It cannot be opened).

  I rebooted again and also tried to open project saved automatically - the same result files. Cannot open the project.

  Does anyone know how to save the movie...?

  Thank you in advance!

  Good news! Please mark this question as answered.

• My after effects CC 2014 and 2015 cannot import the .obj files.  What's up mind dat?

  My after effects CC 2014 and 2015 cannot import the .obj files.  What's up mind dat?

  After Effects has never been able to import these files.

• Cannot open the project file with write access.

  I saw that this problem has been reported before, but have yet to find a solution.

  I have my project file in an external hard drive.  When I plug the hard drive to another computer and want to save it, I get this message:

  "Cannot open the project file with write access.  The file may be locked, or you don't have permission to write to this location.  Select Save as... »

  I don't want to register as because other projects refer to this file and also my file is still going to be ruined.

  FYI two computers use Windows 7.

  All solutions?

  Right-click on the folder in Question and select Properties. Select tab security make sure you that you then add everyone to the list of users. Do you this by selecting edit and then add. Type in all members of the section of the object, and click ok. Then select all the user and check full control. Press Apply and we'll adjust the permissions for the folder and subfolders and files.

  Eric

  ADK

• RoboHelp 11 project does not save changes or close the project

  I work in a German version of my (very large) RoboHelp project, when all of a sudden, the project has stopped accepting any exit, close, or save commands. I will not say that it has stopped responding, because I could always make changes to the table of contents, import subject .htm, open/close the theme files and basically do everything EXCEPT opening and closing of the project manager directories, save or close or exit RoboHelp project.

  So, basically, I had to use the end task task manager and stop RoboHelp, which meant that I lost all changes to my project.

  When I tried to re - open my project, I got the error message ".cpd corrupted", then I deleted the .cpd and re-open the project. Sent back me to the original question - unable to get out, close, or save project. I tried to copy the .xpj and the .cpd of an earlier copy of this project, but not luck.

  How to break this terrible cycle?

  Thank you!

  I think I found the problem. The project settings were set for the appropriate language. I had copied the .cpf of the Spanish version of the project above to see if it would make a difference and the project went very well, but when I generated using, I noticed that the tabs in the frameset, such as contents, Index and search, were in Spanish.

  I checked the properties of the project German and discovered that the language of the project was set to Spanish, rather than German. Once I changed the language of basis for the whole project, I stopped to meet the problem.

• Implementation error "Adobe RoboHelp 8 has encountered a problem... ».  Cannot open the project

  Windows XP / RH8 / RoboSource Control 3.1

  Tried to open a project that I have not consulted for while.   After you click Yes or no to the question «Get latest...» "I get the error"Adobe RoboHelp 8 has encountered a problem and needs to close.  We are sorry for the inconvenience. »

  I tried several times with the same results.  Forum search finds several results, but see nothing that corresponds to that.

  I think it may be a project file to remove that can allow me to open the project, but thought I should ask first.

  Any help will be greatly appreciated.

  Joe

  Remove the CPD file allowed me to open the project in HR

• RoboHelp 2015 adapted HTML5: child projects are not displayed in the output of the main project

  Hello

  I have a main and right project currently linking to two projects of the child. I published the projects of the child to the correct file to location SSL of the master project. When the output of the master file, the table of contents of the master project are fine, but no information of the child projects. I searched the forums and other Web site for answers and have not been able to fix my problem.

  Thank you

  MDawn

  Chris

  I'm sorry, it took me so long to look at more in detail, but the good news is that the project you sent me now works correctly in Firefox and IE.

  The problem has been setup. You must build the parent to a folder that will then create the ready files for the child projects. Next, you generate each child in the child's file in the mergedProjects folder in the parent folder. You generated to the! SSL! each project folder.

  I would like to know if you want to send me the version of working with you.

  See www.grainge.org for RoboHelp and Authoring information

  

  @petergrainge

• Cannot open the project after the reinstallation of RoboHelp 8

  My computer crashed and I had to Reinstall RoboHelp 8.  When I tried to open my project, I got a message saying that the project is from a newer version of the program.  This project is no longer compatible with this version.  Then I did the 8.x updates and got the same results.

  What do you think the problem is here?  My RoboHelp is a upgraded version, and I do not know what version it was modernized at the origin of.  Everything worked perfectly before that.

  In addition, my computer installed Windows 7 on my computer and I already had Vista - what part of the problem?

  I need to get this project open and run as soon as possible.

  Thanks for any help that anyone may be able to offer.

  What you should not have done, is to open a project before you apply the updates. See the projects on my site.

  It's very late here now. Post your progress and I'll look in the morning.

  Maybe remove the CPD will fix. First backup.

• RTE de LV cannot open the project files that include references .lvlib in dependencies

  I am writing a DLL LabVIEW to inspect the LabVIEW project files, and I noticed that if a project has a .lvlib reference in its dependencies, then the Run-Time Engine is contradictory on whether or not he can find the project file:

  • Project.Open returns error 7 (file not found)
  
  
  • Project.GetFileLVVersion is a success

  Here are some excerpts from my code of G and C engaged in this behavior:

  

     int openStatus = StatusSuccess;
  
     char * projectVersion = createStringWithLength (VersionStringLength);
  
  printf ("Analysis %s\n", pathchaine);
  
     OpenProject (pathchaine & openStatus, projectVersion, VersionStringLength);
  
     printf ("  project written in LabVIEW %s\n", projectVersion);
  If (openStatus is StatusSuccess)
  
     {
  
        printf ("  Open the project file.") \n") ;
  
     }
  
     on the other
  
     {
  
        printf("Error: could not find Project file, or file was not a Project file (Error code %i).\n», openStatus);")
  
     }

  However, when running in the development environment, the two methods are successful.

  Is this a bug, and if so, is it fixed in 2014 of LabVIEW?

  Here's how you can reproduce:

  Prerequisites:

  1. LabVIEW 2013 SP1 32-bit
  
  
  2. ConEmu for a good console- https://code.google.com/p/conemu-maximus5/wiki/Downloads
  
  
  3. minGW for compilation of a program to use the LabVIEW - http://sourceforge.net/projects/mingw/files DLL

  reference .lvlib to break dependencies Project.Open in LV RTE

  1. Open the attachment in a temporary directory (e.g. c:\xtra\temp)
  
  
  2. Open "OpenProject.lvproj" in LabVIEW.
  
  
  3. Build 'Open library project'.
  
  
  4. ConEmu with a bash command prompt, navigate to the temporary directory.
  
  
  5. Type make
  
  

  $ make
  
  patch the file "builds/platdefines.h.
  
  GCC - std = c99 g OpenProject.c o OpenProject.exe - lOpenProject - Lbuilds

  
  

  6. type "c:\xtra\temp\OpenProject.lvproj" OpenProject

  OpenProject $ 'c:\xtra\temp\OpenProject.lvproj '.
  
  Analysis c:\xtra\temp\OpenProject.lvproj
  
    Project written in LabVIEW 13.0
  
    Open the project file.

  
  

  7. the opinion that both call nodes execute correctly.

  8. type "c:\xtra\temp\OpenProjectWithLvlibDep.lvproj" OpenProject

  OpenProject $ 'c:\xtra\temp\OpenProjectWithLvlibDep.lvproj '.
  
  Analysis c:\xtra\temp\OpenProjectWithLvlibDep.lvproj
  
    Project written in LabVIEW 13.0
  
  Error: Could not find the project file or file was not a project file (error code 7).

  
  

  9. notice that the node version managed while the open failure.

  10 type diff OpenProject.lvproj OpenProjectWithLvlibDep.lvproj

  $ diff-u OpenProject.lvproj OpenProjectWithLvlibDep.lvproj
  
  -OpenProject.lvproj  kills Nov  4 11:28:28 2014
  
  +++ OpenProjectWithLvlibDep.lvproj      kills Nov  4 11:32:37 2014
  
  @@-13,7 + 13.11 @.
  
         true
  
         fake
  
         
  
  -      
  
  +      
  
  +          
  
  +              
  
  +          
  
  +      
  
         
  
            
  
               true

  Here's another way to trigger this behavior, which shows that LabVIEW occasionally Range the element dependencies:

  1. Open "OpenProject.lvproj" in LabVIEW.
  
  
• Add to the project a new VI and place the constant path of file "Application Directory" his block diagram.


• Select ""leader "Save All (this project)" and use the default name for the new VI.


• Type 'c:\xtra\temp\OpenProject.lvproj' OpenProject


• Notice that there is a mistake once again, as is expected.


• Remove the "Application Directory" path of file constant


• Select ""leader "Save All (this project)"


• Type 'c:\xtra\temp\OpenProject.lvproj' OpenProject


• Note that the problem has disappeared, as is expected.


• Add the "Application Directory" path of file constant in the block diagram.


• Select ""leader "Save All (this project)"


• Type 'c:\xtra\temp\OpenProject.lvproj' OpenProject


• Notice there is no problem, which is surprising, because that there should be a mistake because the dependencies item was not tidy.


• Close the new VI and pull out of the project.


• Select ""leader "Save All (this project)"


• Open "OpenProject.lvproj" in a text editor.


• Note that the dependencies item was put away.


• Add VI back to the project.


• Select ""leader "Save All (this project)"


• Type 'c:\xtra\temp\OpenProject.lvproj' OpenProject


• Notice that there is a mistake once again, as is expected.

NInjaneer_wow wrote:

The same behavior occurs in LabVIEW RTE: a new project with a constant of the Application in an empty vi directory will return an error 7 - file not found, but still return the correct version of LabVIEW in which the project was created.

I did experiment with workarounds for this problem, and I found a.

When I used to get the path of LabVIEW libdir in the ini of the executable file, execution is able to load and inspect the project file.

LIBDIR = 'C:\Program NIUninstaller Instruments\LabVIEW 2013'

While it is expected that a stand-alone executable can be placed on a system that does not have the LabVIEW IDE, it is still surprising to me that the execution engine cannot find standard library of LabVIEW without some explicit guidance. What other factors contribute to this behavior?

References:

• Configuration of LabVIEW files and paths- http://labviewwiki.org/LabVIEW_configuration_file/Paths

• RH8 Word cannot open the project RHx5

  I REALLY have to update an existing project of RHx5 WinHelp. We have updated last year from Office 2003 to 2007, which forced / allowed me to update RHx5 RH8 and RH8 for Word has been installed on my XP pc.

  Tried to open the project RHx5 and received the error: bad DLL calling convention (error 49)

  Given that the attempt had opened a blank Word document, I tried to close it, but failed, with an another error message indicating that a dialog box is open - despite no dialog being visible at this time.

  Can anyone offer helpful suggestions or advice?  I would be very grateful, because our software (rather old) depends on ID card HR to provide contextual assistance.

  See extract of 92.

  http://www.Grainge.org/pages/snippets/snippets.htm

  See www.grainge.org for creating tips and RoboHelp

  @petergrainge

• Cannot open the project on final cut pro :(

  Hey guys, I have a big problem.
  I edited a video which is about 1h30m and using the function "Multicam clip", and successfully made and made a DVD. but unfortunately I need the second edition. Then I opened the library file, click the project, Final Cut Pro X continuous loading and close unexpectedly, and another project to another event works normally. anyone with the same problem? I need to send it to my tmr customer

  p.s. I deleted the file, preferably according to most of the Q & A.

  What version of FCP are you running? If it's the 10.1 or later, projects are in the events that are contained in libraries.

  If 10.1 or later, is the DVD project that does not open in the same library as the project is open? Or they in different libraries

  Russ

• Cannot close the dump imaq link to imaq in labview

  Hi there and thanks for opening up this post

  I'm still new in machine vision. I'm working on a project in Labview, but I am not able to connect to the session of vi IMAQ grab to close the session in the IMAQ vi... LabVIEW tells me that the two sons are of different data types: the first type is IMAQdx.ctl, the second is a class IMAQ.

  Can you help me?

  Thank you

  Hello

  It seems that you use close IMAQ but have IMAQdx screw everything else. NOR-IMAQdx and NOR-IMAQ separated driver API, it should be consistent with what set of screw you are using. Since you use IMAQdx, you just use the palette IMAQdx closing.